Samsung SR8930 Kasutusjuhend

SR8930

English

Vacuum Cleaning Robot

user manual

imagine the possibilities

Thank you for purchasing a Samsung product.

To receive a more complete service,

please register your product at

www.samsung.com/register

This manual is made with 100 % recycled paper.

✻

Before operating this unit, please read the instructions carefully.

✻

For indoor use only.

02_ safety information

safety information

SAFETY INFORMATION

Before operating the appliance, please read this manual thoroughly and retain it for your •

reference.

Because these following operating instructions cover various models, the characteristics of your •

vacuum cleaner may differ slightly from those described in this manual.

CAUTION/WARNING SYMBOLS USED

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

NOTE

Indicates that a risk of personal injury or material damage exists.

WARNING

safety information _03

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANING

ROBOT.

Unplug from outlet when not in use and before conducting maintenance.

WARNING: to reduce the risk of ﬁ re, electric shock, or injury:

GENERAL

Use only as described in this manual.•

Do not operate the vacuum cleaning robot or charger if it has been damaged in any way.•

If the cleaner is not working as it should, has been dropped, damaged, left outdoors, or •

dropped in water, return it to a customer care center.

Do not handle the charger or vacuum cleaning robot with wet hands.•

Use only on dry, indoor surfaces.•

This appliance is not intended for use by persons (including children) with reduced physical, •

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that they do not play with the appliance.•

BATTERY CHARGER

Do not modify the polarized plug to ﬁ t a non-polarized outlet or extension cord.•

Do not use outdoors or on wet surfaces.•

Unplug the charger from the outlet when not in use and before servicing.•

Use only the charger supplied by the manufacturer to recharge.•

Do not use with a damaged cord or plug.•

Do not pull or carry by the cord, use the cord as a handle, close the door on the cord, or pull •

the cord around sharp edges or corners. Keep the cord away from heated surfaces.

Do not use extension cords or outlets with inadequate current carrying capacity.•

Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.•

Do not mutilate or incinerate batteries as they will explode at high temperatures.•

Do not attempt to open the charger. Repairs should only be carried out by a qualiﬁ ed customer •

care centre.

Do not expose the charger to high temperatures or allow moisture or humidity of any kind to •

come into contact with the charger.

04_ safety information

VACUUM CLEANING ROBOT

Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc. •

Do not use without a ﬁ lter in place. When servicing the unit, never put ﬁ ngers or other objects •

into the fan chamber in case the unit accidentally turns on.

Do not put any objects into openings. Do not use with any openings blocked; keep openings •

free of dust, lint, hair, and anything that may reduce air ﬂ ow.

Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).•

Do not pick up anything that is burning or smoke, such as cigarettes, matches, or hot ashes.•

Do not use to pick up ﬂ ammable or combustible liquids such as gasoline, nor use on areas •

where they may be present.

Do not use vacuum cleaning robot in an enclosed space ﬁ lled with vapours given off by oil •

based paint, paint thinner, moth prooﬁ ng substances, ﬂ ammable dust, or other explosive or

toxic vapours.

Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid •

gets on skin, wash quickly with water. If the liquid gets into the eyes, ﬂ ush them immediately

with clean water for a minimum of 10 minutes. Seek medical attention.

safety information

contents _05

contents

SAFETY INFORMATION

02

06 Power Related

07 Before Use

10 In Use

11 Cleaning and Maintenance

PRODUCT FEATURES

13

ASSEMBLING THE CLEANER

15

15 Components

16 Name of each part

OPERATING THE CLEANER

20

20 Installing the vacuum cleaning robot

20 Installation order

20 Turning the Power Switch on or off

21 Installing the charger

22 Charging

23 About the Battery

24 Installing the VIRTUAL GUARD

26 Using the vacuum cleaning robot

26 Starting/Stopping Cleaning

27 Recharging

28 Auto Cleaning

29 Spot Cleaning

30 Max Cleaning

31 Manual Cleaning

32 Delay Start

33 Additional Functions

33 Using additional functions

MAINTAIN TOOLS AND FILTERS

34

34 Cleaning the vacuum cleaning robot

34 Please keep the cleaning and maintenance

methods in mind

34 Cleaning the Sensor Window and the Camera

35 Cleaning the Dust Bin and the Filters

36 Cleaning the vacuum cleaning robot

36 Cleaning the Power Brush

38 Cleaning the Edge-Cleaning Side rotating Brush

39 Cleaning the Driving Wheel

TROUBLESHOOTING

40

40 Checklist before SVC Calls

42 Troubleshooting for Error Codes

PRODUCT SPECIFICATION

43

06_ safety information

POWER RELATED

WARNING

Do not bend the power cord forcefully or place a heavy object

on it that could break it.

This may result in ﬁ re or electric shock. -

WARNING

Make sure to remove any dust or water from the power plug.

Failing to do so may result in a malfunction or electric shock. -

WARNING

Do not pull the power plug by the cord or touch the plug with

wet hands.

This may result in ﬁ re or electric shock. -

WARNING

Do not use multiple plugs in a single socket.

(Do not leave the cord lying exposed on the ﬂ oor.)

This may result in ﬁ re or electric shock. -

WARNING

Do not use a damaged power cord, plug, or a loose power

outlet.

This may result in ﬁ re or electric shock. -

safety information

safety information _07

01 SAFETY INFORMATION

BEFORE USE

CAUTION

Before activating the vacuum cleaning robot, make sure that

the dust bin is assembled.

If the dust bin is not inserted, vacuum cleaning robot will not -

operate.

CAUTION

Never use vacuum cleaning robot in locations with combustible

material such as.

Locations with candles or desk lamps on the ﬂ oor. -

Locations with unattended ﬁ res (ﬁ re or embers). -

Locations with gasoline, distilled alcohol, thinner, ashtrays with -

burning cigarettes, etc.

CAUTION

Vacuum cleaning robot is for domestic use only. Do not use it in the following

locations.

Attics, basements, warehouses, industrial buildings, separate rooms distant from the -

main building, locations exposed to wet or damp conditions such as bathrooms or wash

rooms, and narrow and highly situated locations such as tables or shelves. Critical damage

(abnormal operation and breakage) may occur when used in these locations.

CAUTION

Open all doors to clean all rooms.

When a door is closed, the vacuum cleaning robot will not be able to enter that room. -

However, make sure to close the doors to the main entrance, the veranda and the -

bathroom, and any other rooms where the vacuum cleaning robot may fall to a lower ﬂ oor.

CAUTION

Do not use the cleaner on a black ﬂ oor.

The vacuum cleaning robot may not run normally in this case. -

CAUTION

For carpets with long tassels, fold the tassels under the carpet.

Unfolded tassels may result in critical damage to the carpet and -

the machine itself, as they get caught in the driving wheel or the

power brush.

CAUTION

When the cliff sensor is polluted, the vacuum cleaning robot

may be in danger of falling down the stairs.

This may cause personal injury and critical damage to the

product.

To prevent risk, install the VIRTUAL GUARDs (Fence Mode

setting) in front of dagerous areas. Clean the sensor window

and camera.

08_ safety information

CAUTION

Remove small objects or brittle items from the area to be

cleaned in advance.

Make sure to clear any objects before cleaning. -

Make sure to remove fragile items such as china, glass objects, -

ﬂ owerpots, etc.

Vacuum cleaning robot does not recognize coins, rings or other -

valuable items such as jewelry.

CAUTION

Remove objects scattered on the ﬂ oor before cleaning.

Vacuum cleaning robot is designed to detect obstacles 5cm away -

from it.

Bath towels, pads in front of bathrooms and sinks, entrances, -

utility rooms, power cords, table cloths or belts can become

entangled in the driving wheel or power brush. This can cause

objects to fall from the table.

CAUTION

Inform all family members (or relevant parties) to be cautious

before cleaning or when using the Scheduled Cleaning Mode.

Vacuum cleaning robot may run into children, causing them to fall. -

CAUTION

Ensure that children do not step or sit on the vacuum cleaning

robot.

Children may fall and injure themselves or critical damage may -

occur to the product.

CAUTION

When a child or pet is left alone, make sure to turn off the

Power Switch of the vacuum cleaning robot.

Vacuum cleaning robot may attract their attention. -

When the rotating wheel or brush catches ﬁ ngers, feet, clothing or -

hair, this may result in injury.

If a child or pet is in the way of the vacuum cleaning robot, it may -

be identiﬁ ed as an obstacle and the area may not cleaned.

When the Power Switch is turned off, it will cut off the power -

supply and deactivate all functions.

CAUTION

When installing the charger station, do not leave the power

cord exposed on the ﬂ oor.

When the vacuum cleaning robot automatically recharges or -

passes by the charger station, it may drag the power cord around

with it.

CAUTION

Always keep the power cord of the charger plugged into the

outlet.

Although the vacuum cleaning robot has a self-charging function, -

if the power cord of the charger station is unplugged, it cannot

charge its battery automatically.

safety information _09

01 SAFETY INFORMATION

CAUTION

Install the charger in a location that can be easily accessed by

the vacuum cleaning robot.

If the charger is installed in a corner, this may cause extra -

movements and may disturb the automatic recharging process.

CAUTION

Objects in front of the charger will prevent the vacuum

cleaning robot from auto-charging itself.

Clear the area. -

about 0.5m

about 1m

WARNING

There should be no obstacles and cliffs 0.5m to the left and

right and within 1m of the front.

about 0.5m

about 1m

WARNING

Do not short-circuit the charge pins with metal objects such

as chopsticks, screwdrivers, and etc.

This will result in critical damage to the charger. -

WARNING

Make sure that there is no trace of liquids on the charger

station.

Failing to do so may result in ﬁ re or electric shock. -

WARNING

Make sure the vacuum cleaning robot does not vacuum or

move over liquids such as water, oil or pet litter.

This may result in critical damage to the product. -

Liquids may spread through the wheels resulting in contamination. -

WARNING

Do not use the charger for other purposes.

This may result in critical damage to the charger or cause a ﬁ re. -

WARNING

Do not install the charger station on a dark ﬂ oor.

If the ﬂ oor where the charger station is installed is dark, it is hard for the vacuum cleaning -

robot to return to it.

10_ safety information

IN USE

CAUTION

You cannot use the vacuum cleaning robot on thick carpets.

This may result in problems with the vacuum cleaning robot. -

This may result in damage to carpets. -

CAUTION

Do not use the vacuum cleaning robot on a table or other high

locations.

This may result in damage when the unit accidentally drops. -

CAUTION

Vacuum cleaning robot may bump into furniture such as chair

legs, table legs, thin and long furniture, etc. while operating.

For a quicker and cleaner performance, place the chairs on top of -

the table.

CAUTION

Do not place any objects on top of the vacuum cleaning robot.

This may result in malfunction. -

CAUTION

Immediately remove any large pieces of paper or plastic bags

from the machine while cleaning.

Using the machine for an extended period of time with its inlet port -

obstructed may result in critical damage to the product.

WARNING

If an unusual sound, smell or smoke is emitted from the

vacuum cleaning robot, immediately turn off the Power Switch

and call the customer care center.

safety information _11

01 SAFETY INFORMATION

CAUTION

Do not move the robotic vacuum cleaner holding the dustbin

part.

This may cause the dustbin to separate, resulting in injury or -

serious damage to the product.

NOTE

Vacuum cleaning robot may not be able to continue its

operation if it is stuck at the entrance or veranda doorsill.

To resume operating, turn the Power Switch off and then on again -

after moving it to a location where it can continue cleaning.

NOTE

Vacuum cleaning robot cannot completely clean locations that

it cannot reach, such as corners, and spaces between sofas

and walls.

Please clean these locations occasionally. -

NOTE

Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to

pick up dust clusters that were formed while cleaning.

In this case, sweep up the dust with another cleaning tool. -

CLEANING AND MAINTENANCE

CAUTION

When cleaning the product, do not spray water directly onto

the exterior or wipe it with a volatile material such as benzene,

thinner or alcohol.

This may result in critical damage to the product. -

CAUTION

The unit must not be disassembled or reconstructed by anyone

other than a qualiﬁ ed service engineer.

This may result in damage to the product. -

WARNING

Remove any foreign substances accumulated on the Obstacle

and Cliff sensors on a regular basis.

Dirt accumulated on the sensors will result in inaccurate -

functioning of the sensors.

Cliff sensor

Obstacle sensor

12_ safety information

WARNING

When removing foreign substances, always use the cleaning

brush after turning the Power Switch off.

Failing to do so may result in sudden operation of the unit and -

cause an injury or critical damage to the product.

Edge-cleaning side

brush

Power brush

WARNING

If the power cord is damaged, have it replaced by a qualiﬁ ed

service engineer from the customer care center.

Failing to do so may result in ﬁ re or electric shock. -

WARNING

Before cleaning the charger, make sure to disconnect the

power cord for safety.

WARNING

Contact the Samsung Electronics customer care center to

replace the battery.

Failing to use original batteries will result in product failure. -

product features _13

CONVENIENT VIRTUAL GUARD FUNCTION

You can conﬁ ne the vacuum cleaning robot to a particular section by using the Fence (virtual wall)

mode.

What is ceiling shape recognition (Visionary •

mapping plus™)?

This function recognizes the shape of the ceiling

using the camera on top to identify the area to be

cleaned and determines the best way to pass over

and clean every section of the ﬂ oor.

DELICATE CLEANING OF EVERY CORNER

Since the vacuum cleaning robot cleans the ﬂ oor in a sequential way ( ) along the map

determined by the ceiling shape recognition function, it cleans every corner of the ﬂ oor.

VARIOUS CLEANING MODES

Various cleaning modes are provided to meet all your needs.

1

About 1.5m

2

3

4

5

6

Auto Mode :1. Cleans all rooms automatically.

Spot Mode :2. Cleans a localized area intensely. It can be used to clean bread or cookie

crumbs.

Max Mode :3. Runs until the battery is nearly depleted.

Manual Mode :4. You can clean the ﬂ oor manually by moving the cleaning robot.

Turbo Mode :5. Since the power brush rotates at maximum speed in this mode, the product will

clean more effectively.(You can switch the mode with the remote control.)

Delay Start :6. At the speciﬁ ed time, the cleaning robot cleans the ﬂ oor.

product features

14_ product features

AUTO CHARGING

When the battery is low, the vacuum cleaning robot is

automatically guided to the charger to enable it to perform a

quick auto charge.

EDGE-CLEANING SIDE ROTATING BRUSH

The edge-cleaning side rotating brush cleans dust from the

edges.

DOORSILL CROSSING

About 1cm

Stair type

Vertical type

The vacuum cleaning robot innovative driving system makes

it possible for it to cross over doorsills with a height of about

1cm and clean all rooms. The vacuum cleaning robot may not

be able to pass a 1cm doorsill depending on the shape of the

doorsill.

AVOIDING OBSTACLES

When the vacuum cleaning robot encounters an obstacle while

cleaning, the obstacle sensor allows the cleaner to avoid it and

continue cleaning. (It may happen that the cleaner touches thin

or ﬁ ne obstacles.)

ANTI-FALLING

The 3 Cliff sensors detect downward steps such as stairs or

the front door threshold to prevent vacuum cleaning robot from

falling down stairs.

SAFETY DEVICE

stop

When the vacuum cleaning robot is lifted up while cleaning,

the driving wheels, power brush, suction motor, and side

rotating brush are stopped autonati(all) by sensor.

assembling _15

02 ASSEMBLING

COMPONENTS

Others Components

■

(AAA-Type Batteries)

User Manual /

2 Battery

VIRTUAL GUARD Spare Filter Cleaning Brush Quick Start Guide

assembling the cleaner

Main Body

■

Charger (Station)

■

Remote Control

■

16_ assembling

NAME OF EACH PART

Front

Bottom

Side

Main unit

■

Virtual Guard Sensor

Dustbin Eject Button

Camera

Obstacle Sensor

Dustbin Eject Button

Dust bin

Driving Wheel

Power Switch

Power Brush

Power Brush Cover

Battery Cover

Driving Wheel

Remote Control Sensor

Obstacle Sensor

Bumper Sensor

Remote Control Sensor

Rotating Side Brush

Cliff Sensor

Charge Pin

Roller

Cliff Sensor

Charge Pin

Cliff Sensor

Display panel

assembling _17

02 ASSEMBLING

Charger (Station)

■

VIRTUAL GUARD

■

Distance Detection Sensor

Lamp

Power Button

Main Body Detection Sensor

Installing the batteries

■

Batteries are not supplied with the product. You have to purchase the batteries separately. Install

the alkaline batteries (type D) before use.

1

2

3

Lift the cover of the VIRTUAL

GUARD while pressing the

locking tab.

Install the batteries into the

VIRTUAL GUARD as shown

by the ﬁ gure below. (If the

batteries are installed with

the incorrect polarity, the

VIRTUAL GUARD will not

work.)

After inserting the tip of the

cover into the slot, push the

other end to close it until it

clicks into place.

Speciﬁ cation: Alkaline Type D (LR20) batteries

❈

Power lamp

(red)

Cord winder

Front Back

Charging lamp (green)

Charging

terminals

18_ assembling

Installing the Remote Control Batterise

■

Batteries are not installed in the remote control when purchasing the product.

Install the batteries (type AAA) before use.

1

2

3

Lift the battery compartment

cover at the back of the

remote control, while

pressing the locking tab.

Install the batteries into the

remote control as shown

by the ﬁ gure below. (If the

batteries are installed with

the wrong polarity, the

remote control will not work.)

After inserting the tip of the

cover into the slot, push the

other end to close it until it

clicks into place.

Speciﬁ cation: AAA type batteries

❈

Remote Control

■

Power

Recharging

Max

Spot

Start/Stop

Turbo

Sound

Auto

Directional

Buttons

(moving backwards is

not supported.)

Manual

Delay Start

assembling _19

02 ASSEMBLING

DISPLAY PART

Number Display1.

Shows the timer display, progress status, and error codes using numbers, letters and graphics. -

Battery Level Indicator2.

Charging : Shows the charging progress in 3 steps. -

In Use : Shows the battery charge level. The battery charge level is reduced by each level from -

FULL while operating. (When the battery is fully discharged, one level will ﬂ ash to display “Lo”.)

Timer3.

When cleaning is scheduled, the Timer icon is lit. -

Turbo Mode4.

This icon turns on when Turbo mode is enabled. -

Cleaning Mode Display5.

Each time the Cleaning Mode button is pressed, the corresponding cleaning mode is displayed. -

Auto Mode :(A) This icon turns on when Auto cleaning mode is selected.

Spot Mode :(B) This icon turns on when Spot cleaning mode is selected.

Max Mode :(C) This icon turns on when Max cleaning mode is selected.

BUTTON PART

Cleaning Mode6.

Press to select a cleaning mode. After selecting a cleaning mode, press the ( -

) button to

start cleaning.

Start/Stop7.

Press to start/stop cleaning. -

Recharging8.

When this button is pressed, The cleaning robot will return to the charger station to charge its -

battery.

Display panel

■

1

5

2

3

4

6

7

8

A

B

C

20_ operating

INSTALLING THE VACUUM CLEANING ROBOT

Installation order

Turning the Power Switch on or off1.

To use the vacuum cleaning robot, you must turn on the Power Switch

at the bottom of the main unit.

Installing the Charger2.

To charge the vacuum cleaning robot, you must ﬁ rst install the charger.

Since the battery is discharged when the product is purchased, you

must fully charge the battery before use.

Charging the Battery3.

You should charge the battery completely before using the vacuum

cleaning robot.

Installing the VIRTUAL GUARD4.

You can conﬁ ne the vacuum cleaning robot to a particular section by using Fence (virtual wall)

mode.

Turning the Power Switch on or off

To use the vacuum cleaning robot, you must turn the Power Switch

on.

If you turn off the Power switch, all settings except for the current

time and the Weekly reservations are reset.

If no key is pressed for approximately 1 minute after turning the

❈

power on, the power is automatically cut to prevent the battery

discharging.

To turn the power on again, press and hold the power (Start/

Stop) button on the main body.

Lift the body and turn on the power switch while making 1.

sure not to press any other button.

If the icons are not turned on, it indicates that the battery charge -

is depleted. In this case, dock the vacuum cleaning robot to the

charger station after turning the Power Switch on.

The conﬁ gured time may be different from the current time. If the -

conﬁ gure time is incorrect, set the time to the current time.

If the Power Switch is turned off, the vacuum cleaning robot will

not be charged even if it is docked with the charger station.

operating the cleaner

CAUTION

Leht laadib ...

Samsung SR8930 Kasutusjuhend

Samsung SR8930 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid