Samsung SR20K9350WK Kasutusjuhend

ART WORK SPEC

Product

Model/PJT

Changes Note: Full guide_REV. UP, 4 / REV. UP

Vacuum CleanerHQ R&D PIC: Jungran Kim

Material: Wood Free 80g VR9300K

Design: Hyunwoo Lim

Size: 182mm x 257mm (Base)

148mm x 210mm (print)

Page: 64 Print Color: Black Part Code DJ68-00743H

Date: 2020-01-15 Post Processing : Cut Rev No 07 → 08

POWERbot

Quick reference guide

SR20K9350W* Series

• Before operating this unit, please read the instructions carefully.

• For indoor use only.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 1 2020-01-14 오후 9:59:29

English-2

Parts list

1

Main

body

Basic

Parts

Remote

control

Docking

Station

Batteries (AAA type) Quick reference guide Spare lter

Cleaning brush

Power cord Battery Charger Virtual guard

 Accessories may differ depending on the models.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 2 2020-01-14 오후 9:59:32

English-3

Safety information

2-1

• Before operating the appliance, please

read this manual thoroughly and retain it

for your reference.

• Because these following operating

instructions cover various models, the

characteristics of your vacuum cleaner

may differ slightly from those described

in this manual.

Caution/Warning symbols used

WARNING

Indicates that a danger of death or serious

injury exists.

CAUTION

Indicates that a risk of personal injury or

material damage exists.

Other symbols used

NOTE

Indicates that the following text contains

additional important information.

Indicates that a detachable supply unit.

• For information on Samsung’s

environmental commitments and product

specic regulatory obligations e.g. REACH

(WEEE, Batteries) visit: samsung.com/

uk/aboutsamsung/samsungelectronics/

corporatecitizenship/data_corner.html

Important safety instructions

When using an electrical appliance, basic

precautions should be observed, including

the following:

Read all instructions before using your

POWERbot.

Unplug from outlet when not in use and

before conducting maintenance.

WARNING

To reduce the risk of re, electric shock,

or injury:

General

• Use only as described in this manual.

• Do not operate POWERbot or Charger /

docking station if it has been damaged in

any way.

• If the vacuum cleaner is not working as it

should, has been dropped, damaged, left

outdoors, or dropped in water, return it to

a customer care center.

• Do not handle the Charger / docking

station or POWERbot with wet hands.

• Use only on dry, indoor surfaces.

• This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning

use of the appliance in a safe way and

understand the hazards involved.

• Children shall not play with the appliance.

Cleaning and user maintenance shall not

be made by children without supervision.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 3 2020-01-14 오후 9:59:32

English-4

Safety information

2-2

Battery charger / Docking station

• Do not modify the polarized plug to t a

non-polarized outlet or extension cord.

• Do not use outdoors or on wet surfaces.

• Unplug the Charger / docking station from

the outlet when not in use and before

servicing.

• Use only the Charger / docking station

supplied by the manufacturer to recharge.

• Do not use with a damaged cord or plug

or a loose power outlet.

• Do not pull or carry by the cord, use the

cord as a handle, close the door on the

cord, or pull the cord around sharp edges

or corners. Keep the cord away from

heated surfaces.

• Do not use extension cords or outlets with

inadequate current carrying capacity.

• Do not unplug by pulling on the cord. To

unplug, grasp the plug, not the cord.

• Do not mutilate or incinerate batteries as

they will explode at high temperatures.

• Do not attempt to open the Charger /

docking station. Repairs should only be

carried out by a qualied customer care

center.

• Do not expose the Charger / docking

station to high temperatures or allow

moisture or humidity of any kind to come

into contact with the charger / docking

station.

• COMMISSION REGULATION (EU)

2019/1782

Ecodesign requirements for external

power supplies : www.samsung.com/

global/ecodesign_component

POWERbot

• Do not pick up hard or sharp objects such

as glass, nails, screws, coins, and etc.

• Do not use without a lter in place. When

servicing the unit, never put ngers or

other objects into the fan chamber in case

the unit accidentally turns on.

• Do not put any objects into openings.

Do not use with any openings blocked;

keep openings free of dust, lint, hair, and

anything that may reduce air ow.

• Do not pick up toxic materials (chlorine

bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning or

smoke, such as cigarettes, matches, or hot

ashes.

• Do not use to pick up ammable or

combustible liquids such as gasoline or

use in areas where they may be present.

Also do not use in:

– Locations with candles or desk lamps on

the oor.

– Locations with unattended res (re or

embers).

– Locations with distilled alcohol, thinner,

ashtrays with burning cigarettes, etc.

• Do not use POWERbot in an enclosed

space lled with vapours given off by oil

based paint, paint thinner, moth proong

substances, ammable dust, or other

explosive or toxic vapours.

• Leaks from battery cells can occur under

extreme usage or temperature conditions.

If the liquid gets on skin, wash quickly

with water. If the liquid gets into the

eyes, ush them immediately with clean

water for a minimum of 10 minutes. Seek

medical attention.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 4 2020-01-14 오후 9:59:33

English-5

Safety information

2-3

WARNING

Power related

• Please prevent any risk of electric shock

or re.

– Do not damage the power cord.

– Do not pull the power cord too hard or

touch the power plug with wet hands.

– Do not use a power source other than

100-240V~ and also do not use a

multi outlet to supply power to number

of devices at the same time. (Do not

leave the cord carelessly on the oor.)

– Do not use a damaged power plug,

power cord or loose power outlet.

• Clean dust or any foreign matters on the

pin and contact part of the power plug.

– There is a risk of electric shock or

malfunction.

Before use

• Do not use POWERbot near a heater or

combustible materials.

– Do not use POWERbot near re or ame

such as a movable heater, a candlelight,

a desk lamp, a replace etc. or in a place

where combustible materials such as

gasoline, alcohol, thinner etc. exist.

• Make sure there are no dangerous objects

around the POWERbot’s cleaning area to

prevent collision and unplug any electric

heaters or fans.

• The POWERbot is intended for household

use therefore do not use it in an attic,

basement, storage, industrial building,

out of indoor space, places with moisture

(such as bathroom, laundry), on the table

or shelves.

– The POWERbot can be damaged or

malfunction.

• Install the Virtual guard in front of

dangerous areas (such as stairs or railings)

to prevent damaging the product or

getting injured.

– For your safety, always keep the cliff

sensor clean.

• Be sure POWERbot does not pass through

or touch any kind of liquids.

– The POWERbot can be severely

damaged and it may contaminate other

areas if the wheels pass through liquid.

• Do not spill any liquids on the docking

station.

– There is a risk of re or electric shock.

• Do not use the docking station for

anything other than its intended purpose.

– There is a risk of re or severe damage

to the docking station.

• Always keep the cliff sensor clean for

your safety.

In use

• If any abnormal sounds, smells or smoke

come from POWERbot, immediately shut

off the emergency switch at the bottom of

POWERbot and contact a service center.

Cleaning and maintenance

• When power cord is damaged, contact

a service center to get it replaced by

certied repairman.

– There is a risk of re or electric shock.

• Please check with a Samsung Electronics

service center when exchanging batteries.

– Using batteries from other products can

cause malfunction.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 5 2020-01-14 오후 9:59:33

English-6

Safety information

2-4

CAUTION

Before use

• Insert the dustbin before using POWERbot.

• Open room doors before cleaning in order

to have all rooms cleaned and install

a Virtual guard in front of entryway,

balconies, bathrooms, or other areas

where POWERbot may fall.

• Be careful with the followings for proper

automatic recharging.

– Always turn on the power of the

docking station.

– Install the docking station where

POWERbot can easily nd.

– Do not leave any object in front of the

docking station.

• When installing the docking station, do

not leave the cord carelessly on the oor

since POWERbot may get tangled by it.

• Do not use POWERbot on black colored

oors.

– The POWERbot may not be able to

operate normally.

• Do not pick up POWERbot by the dustbin

holder.

• Do not place any objects within 0.5 m

to both sides and 1 m to the front of the

docking station.

• Make sure the docking station's charging

contact is not damaged or have any

foreign matters on it.

• Do not install the docking station in an

area with a dark oor.

– If the oor around the docking station is

dark, recharging is hindered.

• Move any obstacles that may disturb

POWERbot's movement (such as children's

indoor swing or slides) before cleaning.

In use

• Using POWERbot on thick carpet may

damage both POWERbot and the carpet.

– The POWERbot cannot pass over carpet

that is thicker than 1 cm.

• Do not use POWERbot on tables or other

high surfaces.

– There is a risk of damage if it falls.

• The POWERbot may bump into chair, desk

legs therefore move them away for faster

and efcient cleaning.

• When POWERbot is operating, do not lift

it up or carry it to another area.

• Do not hold by driving wheels of

POWERbot when carrying it to another

area.

• Do not put any objects on top of

POWERbot since it may cause malfunction.

• Remove any large papers or plastic bags

immediately when using POWERbot since

they may block the intake.

• Do not aim the red pointer directly at

people or animals.

Cleaning and maintenance

• Prevent any damage to POWERbot by

complying the followings.

– Do not clean POWERbot by spraying

water directly onto it or use benzene,

thinner, acetone or alcohol to clean it.

• Do not disassemble or repair POWERbot.

This should only be done by a certied

repairman.

• Always keep the obstacle sensor and cliff

sensor clean.

– If foreign matter accumulates, sensors

may malfunction.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 6 2020-01-14 오후 9:59:33

English-7

3

Charging

Please install the docking station in a place

where the oor is level and wall is straight.

How to turn on the emergency

switch

Hold the robot vacuum cleaner and turn

on the emergency switch without pressing

any buttons.

Check the charging status.

"

" will turn on according to

charging progress and "FULL" will

turn on when charging is complete.

When the product is purchased, the battery is not charged, so charging must initially be done manually.

0.5 m

1 m

0.5 m

Make sure the

charge pins on the

robot vacuum cleaner

and the charger are

aligned.

Ensure the power

cord is arranged

neatly next to the

wall.

Ú Install with the grain of wood oors.

Install the charger where the

robot vacuum cleaner can

easily nd it.

Charging lamp during charging

(green)

1_VR9300_Q_guide_EN_00743H-08_SB.indd 7 2020-01-14 오후 9:59:36

English-8

4-1

Using the robot vacuum cleaner

Starting Auto clean mode

The POWERbot moves and

automatically cleans the set areas

only once.

Stop cleaning:

Press and release the button

Starting Spot clean mode

Press and release this button.

The POWERbot cleans a localized

area intensely.

Recharging

You can command POWERbot to

recharge at the docking station

automatically while it is cleaning

by pressing this button.

Auto Clean Spot Clean

Spot clean mode can be selected

only by pressing this button on the

main body of the POWERbot.

Manual Clean

Manual clean mode can be selected

by the direction control buttons of

the remote control.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 8 2020-01-14 오후 9:59:37

English-9

1. Power

Turn POWERbot's power on/off

2. Recharging

Select to recharge POWERbot at the docking station

automatically

3. Start/Stop

Select to start or stop cleaning process

4. Auto clean

Select to clean all set areas only once and then

automatically return to the docking station.

5. Max mode

Select to clean with the strongest suction power

6. Normal mode

Select to clean with moderate suction power

7. Quiet mode

Select to clean with lower operation noise

8. Schedule / Cancel(3sec)

Refer to page 10

9. Clock

Refer to page 10

10. Sound

Each time you press this button, Sound Effects  Mute

is selected in this sequence

11. Smart control

Select to turn on or off the smart control

 Press [Sound] button for 3 seconds..

 Wi-Fi connection should be done to control the

POWERbot using SmartThings App.

Using the robot vacuum cleaner

4-2

2

11

7 6 5

8 9 10

3 4

1

1_VR9300_Q_guide_EN_00743H-08_SB.indd 9 2020-01-14 오후 9:59:38

English-10

Setting time/schedule

Only Auto clean mode can be scheduled.

5

Setting the time

You must set the current time before using the One-time/daily schedule.

Cancelling during setup

Setting will be canceled automatically when there's no input for

7seconds

Cancelling One-time/Daily schedule

When both One-time/

Daily schedule are set

or

Press for 3 sec. Select the schedule Cancel complete

When either One-time

or Daily schedule is set

Press for 3 sec.

Setting complete

Start setting Select "Hour" Select "Minute"

Select "AM/PM"

Skip to previous, next

setting

Skip to previous, next setting

Setting the schedule

Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.

Start setting

Setting complete Select "AM/PM" Select "Minute"

Select "One-time" or

"Daily" schedule

Select "Hour"

1_VR9300_Q_guide_EN_00743H-08_SB.indd 10 2020-01-14 오후 9:59:40

English-11

Cleaning and maintaining

You must turn off the emergency switch before cleaning POWERbot.

6-1

Dustbin

Clean the dustbin when lter inspection indicator ( ) turns on or if there's too much dust in the dustbin.

1

Remove the dustbin

2

Remove the dustbin

cover

3

Remove dust in the

dustbin and cyclone unit

"Click"

4

Detach the cyclone unit

from the dustbin cover,

and then wash the

dustbin and the lter

5

Reassemble the dustbin

6

Reinsert the dustbin

into the main body until

it clicks

1_VR9300_Q_guide_EN_00743H-08_SB.indd 11 2020-01-14 오후 9:59:44

English-12

Cleaning and maintaining

You must turn off the emergency switch before cleaning POWERbot.

6-2

Brush

1

Remove the brush cover

2

Remove the brush

3

Clean the brush

ON

OFF

ON

OFF

4

Reassemble the brush

5

Reassemble the brush

cover

 If a brush or brush cover is not assembled correctly after the maintenance work, scratches may occur on the

oor, or product malfunction may occur. Therefore, assemble them correctly by referring to the cleaning and

maintaining section of a user manual.

Information codes

 Refer to the user manual for steps to take for each Information code with mark on the display panel.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 12 2020-01-14 오후 9:59:50

English-13

Downloading the SmartThings App

f Download and install the SmartThings App from the markets (Google Play Store, Apple App Store, or

Samsung Galaxy Apps). To nd the app, use the keyword “SmartThings”.

NOTE

f SmartThings is incompatible with tablets and some mobile devices.

– Android 6.0 or later (at least 2GB of RAM) is recommended.

f iPad and some mobile devices may not be supported.

– iOS 10.0 or later / iPhone 6 or later is supported.

f Visit Play Store or App Store to see if your mobile device is compatible with SmartThings.

f The supported features are subject to change without any prior notice.

Setting up a Samsung account

f You must sign in to a Samsung account before using the SmartThings app.

f To set up a Samsung account, you can follow the directions provided by the SmartThings app.

f Or, if you have a Samsung smartphone, you can add your Samsung account in the setting app of your

smartphone. Then, it will automatically sign in to your Samsung account.

NOTE

f If you cannot complete the product registration, please take the following steps.

– Try the registration procedure again as you have directed by the pop-up messages.

– Conrm that the UPnP option of your wireless router is active, and then try the registration procedure again.

– Conrm that your wireless router is operating in wireless mode, and then try the registration procedure again.

– If you have two or more POWERbots, turn off the other POWERbots, and then try to register your POWERbot

again.

– If there is any other wireless router that has the same SSID as your wireless router, the registration might be

failed.

f Smart control and Wi-Fi indicator

On Smart control is blocked. (The remote control can still be allowed.)

Off Smart control is allowed.

On The POWERbot is connected to the wireless router.

Off The POWERbot is trying to connect the wireless router.

 Hereby, Samsung Electronics, declares that the radio equipment type appliance is in compliance with Directive

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The

ofcial Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product

Support and enter the model name.

Wi-Fi

Frequency range 2412 - 2472 MHz

Transmitter power(Max) 20 dBm

SmartThings App

The SmartThings App is only compatible with models that have a Wi-Fi

function.

7

1_VR9300_Q_guide_EN_00743H-08_SB.indd 13 2020-01-14 오후 9:59:51

English-14

Memo

1_VR9300_Q_guide_EN_00743H-08_SB.indd 14 2020-01-14 오후 9:59:52

English-15

Memo

1_VR9300_Q_guide_EN_00743H-08_SB.indd 15 2020-01-14 오후 9:59:52

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care center.

Country Customer Care Center Web Site

LITHUANIA 8-800-77777 www.samsung.com/lt/support

LATVIA 8000-7267 www.samsung.com/lv/support

ESTONIA 800-7267 www.samsung.com/ee/support

This product is RoHS compliant

1_VR9300_Q_guide_EN_00743H-08_SB.indd 16 2020-01-14 오후 9:59:52

POWERbot

Kiirjuhend

SR20K9350W* seeria

• Lugege suunised enne seadme kasutamist hoolikalt läbi.

• Kasutamiseks ainult siseruumides.

2_VR9300_Q_guide_ET_00743H-08_SB.indd 1 2020-01-14 오후 9:59:30

Eesti-2

Osade loend

1

Põhiseade

Põhiosad

Kaugjuhtimisseade

Dokkimisjaam

Akud

(AAA-tüüpi)

Kiirjuhend Varulter

Puhastushari

Toitejuhe Akulaadija Virtual guard

 Lisatarvikud võivad olenevalt mudelist erineda.

2_VR9300_Q_guide_ET_00743H-08_SB.indd 2 2020-01-14 오후 9:59:33

Eesti-3

Ohutusalane teave

2-1

• Enne seadme kasutamist lugege käesolev

kasutusjuhend hoolikalt läbi ja hoidke see

hilisemaks ülevaatuseks alles.

• Kuna järgnevad kasutussuunised hõlmavad

erinevaid mudeleid, võivad teie tolmuimeja

näitajad erineda veidi käesolevas juhendis

esitatutest.

KASUTATAVAD ETTEVAATUSABINÕUDE/

HOIATUSTE SÜMBOLID

HOIATUS

Tähistab surma- või tõsiste vigastuste ohtu.

ETTEVAATUST

Tähistab kehavigastuste või materiaalse kahju

ohtu.

TEISED KASUTATAVAD SÜMBOLID

MÄRKUS

Näitab, et järgnev tekst sisaldab olulist

lisateavet.

Näitab, et tegu on eemaldatava toiteseadmega.

• Teabe saamiseks Samsungi

keskkonnakohustuste ja tootekohaste

regulatiivkohustuste, nt REACH-i (WEEE,

akud), kohta külastage veebilehte samsung.

com/uk/aboutsamsung/samsungelectronics/

corporatecitizenship/data_corner.html

Olulised ohutusalased suunised

Elektriseadme kasutamisel tuleb rakendada

üldiseid ettevaatusabinõusid, sh järgmisi.

LUGEGE KÕIK SUUNISED ENNE POWERboti

KASUTAMIST LÄBI.

Seadme mittekasutamisel ja enne hoolduse

teostamist eemaldage see pistikupesast.

HOIATUS

Tulekahju-, elektri- või vigastusohu

vähendamiseks järgige alltoodud

suuniseid.

ÜLDINE

• Kasutage seadet ainult selles

kasutusjuhendis kirjeldatud viisil.

• Ärge kasutage POWERboti ega laadijat/

dokkimisjaama, kui need on mis tahes viisil

kahjustunud.

• Kui tolmuimeja ei tööta nii, nagu peaks,

on maha kukkunud, õue jäetud, seda on

kahjustatud või vette pillatud, viige seade

klienditeeninduskeskusse.

• Ärge käsitsege laadijat/dokkimisjaama ega

POWERboti märgade kätega.

• Kasutage ainult siseruumis kuivadel

pindadel.

• Seadet võivad kasutada lapsed alates

8. eluaastast ning piiratud füüsiliste,

sensoorsete või vaimsete võimete või

vähese kogemuse või väheste teadmistega

inimesed, kui on tagatud järelevalve

või juhendamine seoses seadme ohutu

kasutamisega ning nad mõistavad

kaasnevaid ohte.

• Lapsed ei tohi seadmega mängida. Lapsed ei

tohi teha puhastus- ega hooldustoiminguid

ilma järelevalveta.

2_VR9300_Q_guide_ET_00743H-08_SB.indd 3 2020-01-14 오후 9:59:33

Leht laaditakse ...

Samsung SR20K9350WK Kasutusjuhend

Samsung SR20K9350WK Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid