Electrolux ERS12E37HWI Kasutusjuhend

2

28

54

80

106

USER MANUAL

BRUKSANVISNING

BRUGSVEJLEDNING

ANVÄNDARMANUAL

KÄYTTÖOPAS

AIR CONDITIONER

KLIMAANLEGG

KLIMAANLÆG

LUFTKONDITIONERING

ILMASTOINTILAITE

EN

NO

DA

SV

FI

ERS09E37HW

ERS12E37HW

ERS18E37HW

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings

with it decades of professional experience and innovation. Ingenious and stylish, it has been

designed with you in mind. So whenever you use it, you can be safe in the knowledge that

you’ll get great results every time.

Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

Register your product for better service:

www.electrolux.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number

Warning / Caution-Safety information.

General information and tips.

Environmental information.

Subject to change without notice.

2 www.electrolux.com

CONTENTS

1. SAFETY INSTRUCTIONS .................................................................................... 3

2. PRODUCT DESCRIPTION ................................................................................... 5

3. CONTROL PANEL ............................................................................................... 6

4. REMOTE CONTROL ........................................................................................... 6

5. REMOTE CONTROL DESCRIPTION .................................................................... 8

6. REMOTE CONTROL DISPLAY INDICATOR ....................................................... 10

7. FIRST USE ........................................................................................................ 11

8. HOW TO USE THE REMOTE CONTROL ........................................................... 12

9. HOW TO USE THE INDOOR UNIT..................................................................... 19

10. OPERATING TEMPERATURE ............................................................................ 20

11. EMERGENCY OPERATION ............................................................................... 20

12. OPTIMAL OPERATION ...................................................................................... 21

13. CLEANING AND MAINTENANCE ...................................................................... 21

14. OPERATION TIPS .............................................................................................. 23

15. TROUBLESHOOTING ....................................................................................... 25

16. CORRECT DISPOSAL OF THIS PRODUCT ....................................................... 26

3 ENGLISH

1. SAFETY INSTRUCTIONS

Before the installation and use of the

appliance, carefully read the supplied

instructions. The manufacturer is not

responsible if an incorrect installation and

use causes injuries and damages. Always

keep the instructions with the appliance

for future reference.

1.1 Children and vulnerable

people safety

WARNING!

Risk of suffocation, injury or

permanent disability.

s This appliance can be used by

children aged from 8 years and above

and persons with reduced physical,

sensory or mental capabilities or lack of

experience and knowledge if they have

been given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved.

s Children shall not play with the

appliance.

s Cleaning and user maintenance shall

not be made by children without

supervision.

1.2 Installation and Use

WARNING!

Risk of suffocation, injury or

permanent disability.

s Contact an authorised installer for

installation of this unit.

s Contact an authorised service

technician for repair or maintenance of

this unit.

s The socket outlet required to supply

power must be connected and

commissioned by a licenced contractor.

s If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly qualiÛed

persons in order to avoid a hazard.

s Installation work must be performed

in accordance with the national wiring

standards and the electricity suppliers

service rules by authorised personnel

only.

s If the unit is to be moved to another

location or disposed of, only a suitably

qualiÛed person is permitted to

undertake such work.

s If you notice an unusal situation, such

as a burning smell, please switch off

the power to the air conditioner and

contact an Electrolux service agent. If

this abnormal status continues the air

conditioner may be damaged or even

cause electric shock or Ûre.

s Do not operate the air conditioner with

wet hands. This may cause electric

shock.

s Do not damage or cut off the power

cord or other wires. If this occurs,

please have it repaired or replaced by

an accredited technician.

s Do not connect this air conditioner to a

multi outlet powerboard.

s Please switch off the power supply to

the air conditioner if it is not to be used

for an extended period. Otherwise, it

will accumulate dust and may cause a

Ûre.

s Before cleaning the air conditioner,

please disconnect the power supply

in order to eliminate the possibility of

electric shock.

s The power supply should be matched

with the air conditioner according to

the installation manual. Air conditioners

provided with a supply cord should

be connected directly to a power

outlet with a suitable safety switch. Air

conditioners that are hard wired must

be connected to a suitable safety circuit

breaker according to the installation

manual.

s Please ensure that the power supply

to the air conditioner is stable and

meets the requirements set out in the

installation manual.

s Always ensure the product is installed

4 www.electrolux.com

with appropriate earthing.

s For safety, be sure to turn off the

circuit breaker before performing any

maintenance or cleaning or when the

product is not used for an extended

period of time. Accumulated dust may

cause Ûre or electric shock.

s Select the most appropriate

temperature. It can save electricity.

s Do not keep windows and doors open

for a long time during operation. It will

result in insufÛcient performance.

s Do not block the air inlet or outlet. It will

result in insufÛcient performance and

cause malfunctions.

s Keep combustible materials away from

the units at least 1m. It may cause Ûre.

s Do not step on the top of the outdoor

unit or place heavy things on it. It may

cause damage or injury.

s Do not attempt to repair the air conditioner

by yourself. Incorrect repairs may cause

electric shock or Ûre. Please contact your

local authorised service centre.

s Do not insert your hands or objects into

the air inlet or outlet. It may cause injury.

s Do not expose animals or plants directly

to the airÜow.

s Do not use the unit for any other

purpose, such as preserving food or

drying clothes.

s Do not splash water on the air conditioner.

It may cause electric shock or malfunction.

s For safety, be sure to turn off the

circuit breaker before performing any

maintenance or cleaning or when the

product is not used for an extended

period of time. Accumulated dust may

cause Ûre or electric shock.

You can also get this manual through your local distributor or by

visiting our website.

Please Ûnd the Electrolux web addresses to your local country from below table.

Country Website address Country Website address

Albania www.electrolux.al Netherlands www.electrolux.nl

Austria www.electrolux.at Norway www.electrolux.no

Belgium www.electrolux.be Poland www.electrolux.pl

Bulgaria www.electrolux.bg Portugal www.electrolux.pt

Croatia www.electrolux.hr Romania www.electrolux.ro

Czech Republik www.electrolux.cz Serbia www.electrolux.rs

Denmark www.electrolux.dk Slovakia www.electrolux.sk

Finland www.electrolux.Û Slovenia www.electrolux.sl

France www.electrolux.fr Spain www.electrolux.es

Germany www.electrolux.de Sweden www.electrolux.se

Greece www.electrolux.gr Switzerland www.electrolux.ch

Hungary www.electrolux.hu Turkey www.electrolux.com.tr

Italy www.electrolux.it UK & Ireland www.electrolux.co.uk

Luxembourg www.electrolux.lu

Please visit www.electrolux.com for more inforamtion

5 ENGLISH

3 4

5 6 78

13

1

12

11

10

14

2

9

Air inlet

Air Outlet

Air inlet (side)

Air inlet (rear)

Air outlet

1 Front panel

2 Digital display

3 Air Ûlter

4 Pre-dust Ûlter

5 Horizontal air Üow grille

6 Vertical air Üow louver (inside)

7 Manual control button

8 Cold plasma generator (if applicable)

9 Remote controller

10 Refregerant pipe

11 Drain hose

12 Power cable

13 Mounting plate

14 Connecting cable

All the pictures in this manual are for explanation

purposes only. The actual shape of the indoor unit

you purchased may be slight different on front

panel and display window. The actual shape shall

prevail.

2.1 Split Type

2. PRODUCT DESCRIPTION

6 www.electrolux.com

3. CONTROL PANEL

1 Wifi indication lamp (optional)

Lights up when WiÛ feature is activated.

2 I Feel indication lamp

Lights up when I Feel feature is activated.

3 Turbo indication lamp

Lights up when Turbo feature is activated.

4 TEMPERATURE indication lamp

s Displays the temperature settings when

the air conditioner is operational.

s Displays the malfunction code when

fault occurs.

5 Eco indication lamp

Lights up when Eco feature is activated.

6 Healthy lamp (Optional)

Lights up when Healthy feature is activated.

7 Repellent lamp (Optional)

8 Lights up when Repellent feature is

activated.

1 2 3 54 6 7

4. REMOTE CONTROL

4.1 How to use the Remote

control

1. Keep the remote control where its

signal can reach the receiver of the

indoor unit.

2. When operate the air conditioner, make

sure the remote control is pointing to

the signal receiver of the indoor unit.

3. When the remote control sends out

a signal, the symbol

will blink for

about 1 second on the display of the

remote control.

4. The indoor unit will acknowledge the

signal with a beep when it receives the

signal from the remote control.

5. Please press the button of the remote

control and resend the signal if you did

not hear a beep from the indoor unit.

s The air conditioner will not

operate if curtains, doors or other

materials block the signals from

the remote control to the indoor

unit.

s Prevent any liquid from falling

into the remote control. Do not

expose the remote control to

direct sunlight or heat.

s If the infrared signal receiver on

the indoor unit is exposed to

direct sunlight, the air conditioner

may not function properly. Use

curtains to prevent the sunlight

from falling on the receiver.

s If other electrical appliances react

to the remote control, either move

these appliances or consult your

local dealer.

7 ENGLISH

4.2 Location of the Remote Control

Fig.01

Max. 8m

s Keep the remote control where its

signal can reach the receiver of the

indoor unit (a maximum distance of

8 m is allowed).

s When you select the timer operation,

the remote control automatically

transmits a signal to the indoor unit at

the speciÛed time.

s If you keep the remote control in a

position that hinders proper signal

transmission, a time lag of up to

15 minutes may occur.

s When the remote control sends out

a signal, the symbol

will blink

for about 1 second on the display.

The indoor unit will acknowledge the

signal with a beep when it receives an

effective signal.

4.3 Battery installation/replacement

Fig.02 s Slide the battery compartment cover

off and insert two new alkaline dry

batteries (2x AAA 1.5 Volt). Make sure

that the polarity of (+) or (-) is installed

correctly.

s Slide the battery compartment cover

back on.

s When changing batteries, do

not use old or varied ones,

otherwise, it may cause

problems with the remote

control.

s If the remote control is not used

for a long time, remove the

batteries as old batteries may

leak or corrode and damage

the remote control.

s The battery life during normal

use is about six months.

s If the remote control does

not operate normally, please

remove and reÛt the batteries. If

abnormal operation continues,

replace with new batteries.

8 www.electrolux.com

5. REMOTE CONTROL DESCRIPTION

1

3

2

9

10

4

5

6

7

8

12

11

13

14

1 ON/OFF Button

2 UP/DOWN Button

3 Mode Button

4 Swing Button

5 Timer-On Button

6 Timer-Off Button

7 I Feel Button

8 Fan Speed Button

9 Turbo Button

10 Health Button (Clock Button)

1

11 Temp Button

12 Light Button

13 Repellent Button (X-Fan Button)

2

14 Eco Button

ON/OFF BUTTON

Press the button to switch on the unit.

Press the button again to switch off the

unit.

UP/DOWN BUTTON

Press the button to increase/decrease the

temperature. Keep the button pressed for

two seconds to accelerate the process.

Release the button to set the temperature

and send the order that the °C/°F signal

will be displayed constantly.

Temperature range: 16-30 °C (61-86 °F).

In Timer-On/Off or Clock functions,

use the button to set the clock or timer

adjustment.

MODE BUTTON

Press the button to set the operation

mode: AUTO, DRY, FAN, COOL and

HEAT. Default setting: AUTO.

sFor Cooling only models, there is

no HEAT mode available.

sIn AUTO mode, user can touch

on the controls to set desired

temperature and the product

memorize the temperature set in

the next use.

SWING BUTTON

Press this button, the louver will swing up

and down automatically. Press again to

cancel it and the louver will stay at its last

position.

TIMER ON Button

Press the button to set the timer function

AUTO COOLDRY HEATFAN

1

Clock Button ” ” be shown in

models without Health fuction.

2

X-Fan Button ” ” be shown in

models without Repellent fuction.

9 ENGLISH

AUTO HIGHLOW MEDIUM

for switching on the unit. If the TIMER

ON symbol ”

” blinks, press the UP

or DOWN button to set the time. Keep

the button pressed for two seconds to

accelerate the process. Press the button

to set the timer. Default setting: 8:00

(24-hour mode). Press the button again to

cancel the timer function.

TIMER OFF BUTTON

Press the button to set the timer function

for switching on the unit. If the TIMER

ON symbol ”

” blinks, press the UP

or DOWN button to set the time. Keep

the button pressed for two seconds to

accelerate the process. Press the button

to set the timer. Default setting: 8:00

(24-hour mode). Press the button again to

cancel the timer function.

I FEEL BUTTON

Press the button to enable or disable the

I FEEL function. If the I FEEL function is

enabled, the I FEEL symbol ”

” will be

shown.

If the I FEEL symbol is enabled, the remote

control will send the ambient temperature

to the main unit every 10 minutes or when

you press one of the buttons.

FAN SPEED BUTTON

Press the button to set the fan speed:

AUTO, LOW, MEDIUM and HIGH. Default

setting: AUTO. In the DRY mode, only

LOW can be set.

TURBO BUTTON

In COOL or HEAT mode, press the button

to enable or disable the turbo function. If

the turbo function is enabled, the turbo

symbol ”

” will be shown.

If the turbo function is enabled, the unit

will operate at turbo speed to cool or heat

rapidly so that the ambient temperature

approaches the set temperature as soon

as possible.

CLOCK BUTTON (OPTIONAL)

Press the button to set the clock. If the

clock symbol ”

” blinks, press the UP

or DOWN button to set the time. Keep

the button pressed for two seconds to

accelerate the process. Press the CLOCK

button again to set the clock. The clock

symbol stops blinking.

HEALTH BUTTON (OPTIONAL)

Press the button to enable or disable the

operation of the health Ûlter. If the HEALTH

function is enabled, the HEALTH symbol

”

” will be shown.

TEMP BUTTON

Press this button to change the remote

control display of the set temperature to

the Room or Outside temperature.

See Room temperature, the symbol

”

” will be shown.

See Outside temperature, the symbol

”

” will be shown.

LIGHT BUTTON

Press the button to switch the display

of the indoor unit on or off. When switch

on, the light symbol ”

” will be showed.

Default setting: OFF.

X-FAN BUTTON (OPTIONAL)

In COOL or DRY mode, press the button

to enable or disable the X-FAN function.

If the X-FAN function is enabled, the

X-FAN symbol ”

” will be shown. Default

setting: OFF.

REPELLENT BUTTON

(OPTIONAL)

In COOL or DRY mode, press the button

to enable or disable the Repellent function.

If the Repellent function is enabled, the

Repellent symbol ”

” will be shown.

Default setting: OFF.

ECO BUTTON

In COOL or DRY mode, press this button

to enable or disable Eco operation. If the

ECO function is enabled, the ECO symbol

”

” will be shown. Default setting: OFF.

This is ideal for the users to use while

sleeping.

10 www.electrolux.com

6. REMOTE CONTROL DISPLAY INDICATOR

1

3

2

16

17

4

5

6

7

8

10

9

11

15

14

12

13

19

18

20

21

1 Transmission Indicator

2 X-Fan display

3 Repellent display (optional)

4 I Feel display

5 WIFI display (optional)

6 Temp display - Outside

7 Temp display - Room

8 Temperature display

9 Clock display

10 Timer-On display

11 Mode display

12 Fan Speed display

13 Turbo display

14 Eco display

15 Health display (optional)

16 Swing display

17 °C/°F display

18 Light display

19 Timer set display

20 Lock display

21 Timer-Off display

TRANSMISSION INDICATOR

Displays when the remote control

transmits signals to the indoor unit.

X-FAN DISPLAY

Displays when X-Fan function is enabled.

For models without X-Fan button,

to enabled X-Fan funtion you need

press Mode and Eco buttons at the

same time.

REPELLENT DISPLAY

Displays when Repellent function is

enabled.

There is no such indicator for the

models without Repellent function.

I FEEL DISPLAY

Displays when I Feel function is enabled.

WIFI DISPLAY

Displays when the WIFI function is

activated by pressing Turbo and Mode

buttons at the same time.

Press the buttons for 10 seconds,

remote control send WIFI reset

code and active the WIFI fuction.

TEMP DISPLAY

Displays when the temperature shown on

the LCD screen is room temperature or

outside. It can be switched by pressing

the Temp button.

11 ENGLISH

7. FIRST USE

1. Ensure the unit is plugged in and power

is available.

2. Be sure the batteries are inserted

correctly in the remote control (the

lights on the remote control will be on).

3. Point the remote control to the indoor

unit and press ON/OFF button to turn

the unit on.

4. Set the time by Control buttons and

conÛrm by pressing the Clock button.

sIn case of energy cut off or

product shut down when

removing the power cord,

or even when changing the

remote control batteries the

microprocessor will return back

to the AUTO mode.

sThe default operating mode

is AUTO. Once you select the

operating mode with remote

control, the operating conditions

will be saved in the indoor unit’s

microcomputer memory. The

next time the air conditioner will

start operating under the same

conditions when you simply push

the ON/OFF button of the remote

control.

TEMPERATURE DISPLAY

Displays the room or set temperature in

°C or °F.

CLOCK DISPLAY

Displays when Clock function is enabled.

For models without Clock button,

to enabled Clock funtion you need

press Mode and Temp buttons at

the same time.

TIMER-ON DISPLAY

Displays when the Timer-On function is

enabled.

MODE DISPLAY

Displays the current selected mode.

Including AUTO, DRY, FAN, COOL and

HEAT.

FAN SPEED DISPLAY

Displays the selected fan speed: AUTO,

LOW, MED and HIGH. Nothing displays

when the fan speed is selected in AUTO

speed. When AUTO or DRY Mode

is selected, there will be no signals

displayed.

TURBO DISPLAY

Displays when Turbo function is enabled.

ECO DISPLAY

Displays when Eco function is enabled.

HEALTH DISPLAY

Displays when Health function is enabled.

There is no such indicator for the

models without Healthy function.

SWING DISPLAY

Displays when Swing function is enabled.

°C/°F DISPLAY

Displays when °C or °F mode is selected.

Turn the remote control off and the °C/°F

can be switched by pressing Mode and

DOWN buttons at the same time.

LIGHT DISPLAY

Displays when Light function is enabled.

TIMER DISPLAY

Displays the Clock time (must be set) and/

or the on/off time of the timer.

LOCK DISPLAY

Displays when Lock function is enabled.

Press Mode and Fan buttons at

the same time, you can lock and

unlock the remote control.

TIMER-OFF DISPLAY

Displays when the Timer-Off function is

enabled.

12 www.electrolux.com

8. HOW TO USE THE REMOTE CONTROL

Ensure the unit is plugged in and power is available. The OPERATION indicator on

the display panel of the indoor unit illuminates.

Automatic Operation

A

B

C

1. Press the ON/OFF button (A) to start

the air conditioner.

2. Press the MODE button (B) to select

Auto.

3. Press the UP/DOWN button (C) to

set the desired temperature. The

temperature can be set within a range

of 16 ºC/61 ºF~30 ºC/88 ºF in 1 ºC/1 ºF

increments. (20 ºC/68 ºF~28 ºC/82 ºF

for Egypt models only)

4. Press the ON/OFF button (A) to turn

the air conditioner off.

s In the Auto mode, the air

conditioner can logically choose

the mode of Cooling, Fan,

Heating and Dehumidifying

by sensing the difference

between the actual ambient

room temperature and the set

temperature on the remote

controller.

s In the Auto mode, the fan speed

can be switched.

s If the Auto mode is not

comfortable for you, the desired

mode can be selected manually.

13 ENGLISH

Dehumidifying Operation

A

B

C

1. Press the ON/OFF button (A) to start

the air conditioner.

2. Press the MODE button (B) to select

DRY mode.

3. Press the UP/DOWN button (C) to

set the desired temperature. The

temperature can be set within a range

of 16 ºC/61 ºF~30 ºC/88 ºF in 1 ºC/1 ºF

increments. (20 ºC/68 ºF~28 ºC/82 ºF

for Egypt models only)

4. Press the ON/OFF button (A) to turn

the air conditioner off.

s In the Dehumidifying mode, you

can not switch the fan speed. It

has already been automatically

set at low speed.

s In the Dehumidifying mode, Turbo

fuction can not be available.

Cooling/Heating/Fan Operation

A

D

B

C

1. Press the ON/OFF button (A) to start

the air conditioner.

2. Press the MODE button (B) to select

COOL, HEAT or FAN mode.

3. Press the UP/DOWN button (C) to

set the desired temperature. The

temperature can be set within a range

of 16 ºC/61 ºF~30 ºC/88 ºF in 1 ºC/1 ºF

increments.(20 ºC/68 ºF~28 ºC/82 ºF

for Egypt models only)

4. Press the FAN SPEED button (D) to

select the fan speed in four steps -

Auto, Low, Med, or High.

5. Press the ON/OFF button (A) to turn

the air conditioner off.

There is no Heating operation

available for Cooling only models.

14 www.electrolux.com

Swing Operation

A

1. When press the button (A) once and

quickly, the air Üow direction setting

feature of the louver is activated. The

moving angle of the louver is 6º for

each press. Keep pressing the button

to move the louver to the desired

position.

2. If keep pressing the SWING button

without releasing for 2 more seconds,

the auto swing feature of the louver is

activated. The horizontal louver would

swing up/down automatically. Press it

again to stop.

When the louver swing or move

to a position which would affect

the cooling and heating effect

of the air conditioner, it would

automatically change the swing/

moving direction.

Timer Operation

Press the TIMER ON button (A) can set

the auto-on time of the unit. And press the

TIMER OFF button (B) can set the auto-off

time of the unit.

To set the Auto-on time.

1. Press the TIMER ON button. The

signal

will Üash on the display

in case of the Ûrst use of Timer-On

operation. Otherwise, the last set time

will Üash. Now it is ready to reset the

Auto-on time to START the operation.

2. Push the UP/DOWN button to set

desired Auto-on time. Each time you

press the button, the time increases

in 1 minutes increments, holding the

button down will scroll more rapidly

through the time display.

3. Press the TIMER ON button again to

conÛrm the set time. The signal q

”

will stay on the display.

4. To cancel settings, press the TIMER

ON button again. Make sure the signal

q

” on the display is turned off.

A

B

15 ENGLISH

To set the Auto-off time.

1. Press the TIMER OFF button. The

signal

will Üash on the

display in case of the Ûrst use of Timer-

On operation. Otherwise, the last set

time will Üash. Now it is ready to reset

the Auto-off time to TURN OFF the

operation.

2. Push the UP/DOWN button to set

desired Auto-off time. Each time you

press the button, the time increases

in 1 minutes increments, holding the

button down will scroll more rapidly

through the time display.

3. Press the TIMER OFF button again to

conÛrm the set time. The signal q

”

will stay on the display.

4. To cancel settings, press the TIMER

OFF button again. Make sure the signal

q

” on the display is turned off.

s The working time of the timer

function set by the remote control

depends on the Clock time.

Check that the Clock on the

remote control is set correctly in

order to prevent malfunctioning.

s The effective operation time set

by the remote control is limited in

24 hours.

Examples of Timer Settings

TIMER ON (Auto-on Operation)

This function is recommended when

you want the unit to be turned on

automatically before returning home. The

air conditioner will automatically start

operating at the set time.

Example:

It is 8:00 AM and you want the air

conditioner to start working at 6:00 PM.

1. Press the Timer-On button.

2. Set the desired time by pressing

repeatedly or holding down the Control

buttons until 18:00 shows in the display

of the remote control.

3. ConÛrm the set time by pointing the

remote control to the indoor unit and

pressing again the Timer-On button.

q

” symbol will stay on remote

control’s display. The Timer indicator

on the display panel of indoor unit is

illuminated.

TIMER OFF (Auto-off Operation)

This function is recommended when

you want the unit to be turned off

automatically for bed time. The air

conditioner will automatically stop

operating at the set time.

Example:

Example: It is 6:00 PM and you want the

Air Conditioner to turn off at 11:55 PM.

1. Press the Timer-Off button.

2. Set the desired time by pressing

repeatedly or holding down the Control

buttons until 23:55 shows in the display

of the remote control.

3. ConÛrm the set time by pointing the

remote control to the indoor unit and

pressing again the Timer-Off button.

q

” symbol will stay on the remote

control’s display. The Timer indicator

on the display panel of indoor unit is

illuminated.

COMBINED TIMER (Setting

both ON and OFF timers

simultaneously)

TIMER OFF ė TIMER ON (On

ė Stop ė Start operation)

This feature is useful when you want to

stop the air conditioner after you go to

bed, and start it again in the morning

when you wake up or when you return

home.

Example:

It is 8:00 AM and you want to stop the

air conditioner at 9:30AM and restart at

6:00PM.

1. Press the Timer-Off button.

16 www.electrolux.com

2. Set the desired time by pressing

repeatedly or holding down the UP/

DOWN buttons until 09:30 shows in the

display of the remote control.

3. ConÛrm the set time by pointing the

remote control to the indoor unit and

pressing again the Timer-Off button.

4. Press the Timer-On button.

5. Set the desired time by pressing

repeatedly or holding down the UP/

DOWN buttons until 18:00 shows in the

display of the remote control.

6. ConÛrm the set time by pointing the

remote control to the indoor unit and

pressing again the Timer-On button. q

” and q ” symbol is displayed on

the remote control and the function is

activated.

TIMER ON ė TIMER OFF

(Off ė Start ė Stop operation)

This feature is useful when you want to

start the air conditioner before you wake

up and stop it after you leave the house.

Example:

It is 10:00 PM and you want to start the

air conditioner at 6:30 AM and stop it at

9:30 AM.

1. Press the Timer-On button.

2. Set the desired time by pressing

repeatedly or holding down the UP/

DOWN buttons until 06:30 shows in the

display of the remote control.

3. ConÛrm the set time by pointing the

remote control to the indoor unit and

pressing again the Timer-On button.

4. Press the Timer-Off button.

5. Set the desired time by pressing

repeatedly or holding down the UP/

DOWN buttons until 18:00 shows in the

display of the remote control.

6. ConÛrm the set time by pointing the

remote control to the indoor unit and

pressing again the Timer-Off button.

q

” and q ” symbol is displayed

on the remote control and the function

is activated.

Setting the Clock

B

A

Before you start operating the air

conditioner, set the clock of the remote

control using the procedure given in this

section. The clock panel on the remote

control will display the time regardless of

whether the air conditioner is in operation

or not. After batteries are inserted in the

remote control,

will display and

begin to Üash.

1. Press the UP/DOWN buttons to set the

desired time.

2. When the desired time is achieved,

press the Clock button again or after 5

seconds with no operation, the clock

time stops Üashing and the clock is set.

3. Press the Clock button and the clock

display will start to Üash. Follow step 1

and 2 to set the new time.

For models without Clock button,

to enabled Clock funtion you need

press Mode and Temp buttons at

the same time.

17 ENGLISH

Eco(Sleep) Operation

A

When you press the Eco/Sleep button

(A), the economic running function will

be activated, the set temperature will

increase(cooling) or decrease(heating)

by 1 ºC(1 ºF) over the next 1 hour and

by another 1 ºC(1 ºF) after an additional

1 hour.This new temperature will be

maintained for 5 hours before it returns to

the originally selected temperature.

The Eco/Sleep function is only

available under Cooling, Heating

and AUTO operation.

I Feel Operation

When you press the I Feel button (A), the I

Feel function will be activated, the remote

control works as a remote thermostat,

providing an accurate temperature control

and maximum comfort. The remote

control sends the temperature information

at its location to the indoor unit every

ten (10) minutes. The air conditioner will

quit I Feel operation if no temperature

information is received from the remote

control for successive eleven (11) minutes.

Health Operation (optional)

Press the Health button (A) to active

the Active Plasma fuction. The Active

Plasma generator releases plasma which

can eliminate bacteria, viruses, dusts

and other harmful agents in the air. This

function is recommended when the indoor

air quality is in bad condition.

Repellent Operation (optional)

In Cool and Dry mode, press the Repellent

button (A) to active the Repellent fuction.

A

18 www.electrolux.com

X-fan Operation

In Cool and Dry mode, press the X-Fan

button (A) to active the X-Fan fuction.

Press the X-Fan button to active the

Self-Cleaning. After the unit is turned off

the indoor fan will continue operation for

2 minutes to dry the indoor unit prevent

from bacteria and mildew growing.

For models without X-Fan button,

to enabled X-Fan function you

need press Mode and Eco buttons

at the same time.

8°C(46°F) Heating Operation

In Heat mode, press Mode button (A)

and Light button (B) at the same time

to enable 8°C(46°F) Heating operation.

The temperature set q8°C(46°F)” will be

shown, press Mode button (A) and Light

button (B) at the same time again to quit

the operation.

s In 8°C(46°F) Heating function, fan

speed will set in AUTO mode and

can not be changed.

s In 8°C(46°F) Heating function,

current temperature set can not be

changed.

s 8°C(46°F) Heating function and

Eco function can not coexist.

A

B

A

19 ENGLISH

9. HOW TO USE THE INDOOR UNIT

WARNING!

s Do not operate the air

conditioner for long periods

with the air Üow direction

set downward in cooling or

dehumidifying mode. Otherwise,

condensation may occur on the

surface of the horizontal louver

causing moisture to drop on to

the Üoor or on furnishings.

s When the air conditioner is

started immediately after it

was stopped, the horizontal

louver might not move for

approximately 10 seconds.

Louver in closed position.

1. Adjust the air Üow direction properly

otherwise it might cause discomfort

or cause uneven room temperatures.

2. Adjust the horizontal louver using the

remote controller.

3. Adjust the vertical louver manually.

To set the vertical air Üow (Up--

Down) direction

Perform this function while the unit is

in operation. Use the remote controller

to adjust the air Üow direction. The

horizontal louver can be moved at a

range of 6º for each press, or swing up

and down automatically.

To set the horizontal air Üow

direction (left - right)

Move the vertical louver manually to

adjust the air Üow in the direction you

prefer.

IMPORTANT!

Do not put your Ûngers into the panel

of blower and suction side. The high-

speed fan inside may cause danger.

s Open angle of the horizontal louver

should not be set too small, as

COOLING or HEATING performance

may be impaired due to too restricted

air Üow area.

s Do not move the horizontal louver

manually, otherwise the horizontal

louver will be out of sync. Please

cease operating, unplug power for

a few seconds, then restart the air

conditioner.

s Do not operate unit with horizontal

louver in closed position.

Vertical louver

Range

20 www.electrolux.com

10. OPERATING TEMPERATURE

Operating temperature ranges

Model climate Type Ambient temperature (Cooling) Ambient temperature (Heating)

T1 -15°C~43°C -25°C~24°C

T3 18°C~52°C -7°C~24°C

Important!

1. Optimum performance will be achieved

within these operating temperatures.

If air conditioner is used outside of

the above conditions, certain safety

protection features might come into

operation and cause the unit to function

abnormally.

2. If the air conditioner runs for a long

time in cooling mode and the humidity

is high(over 80%), condensed water

11. EMERGENCY OPERATION

Units are equipped with a switch to run

emergency operation mode. It can be

accessed by opening the front panel.

This switch is used for manual operation

in case the remote controller fails to work

or maintenance necessary.

1. Open and lift the front panel up to

an angle until it remains

with a

clicking sound.

2. One press of the manual control

switch will lead to the forced AUTO

operation. If press the switch twice

within

seconds, the unit will

operate under forced COOL operation.

3. Close the panel

to its original

position.

s The unit must be turned off

before operating the manual

control button. If the unit is

operational, continue pressing

the manual control button until

the unit is off.

s This switch is used for testing

purposes only. You had better

not choose it.

s To restore the remote controller

operation, use the remote

controller directly.

Manual control button

may drip out of the unit. Please sets the

vertical air Üow louver to its maximum

angle (vertically to the Üoor), and set

HIGH fan mode.

Suggestion:

For the unit adopts an Electric Heater,

when the outside ambient temperature is

below 0 ºC(32 ºF), we strongly recommend

you to keep the machine plugged in order

to guarantee it running smoothly.

Leht laadib ...

Electrolux ERS12E37HWI Kasutusjuhend

Electrolux ERS12E37HWI Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid