Electrolux EXH12HX1WE Kasutusjuhend

user manual

brugsanvisning

käyttöohje

bruksanvisning

Heatpump

Varmepumpe

Ilmapumppu

Varmepumpe

Värmepump

EXH09HX1WI/EXH09HX1WE

EXH12HX1WI/EXH12HX1WE

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

Contents

Safety ..................................................... 3

Description Of The Appliance ................. 5

Before The First Use ............................... 7

Operating The Appliance ........................ 9

Additional Information On Use .............. 16

Cleaning And Care ............................... 16

What To Do If ....................................... 18

Environment Concerns ......................... 19

European Guarantee ............................ 20

www.electrolux.com ............................ 20

2 electrolux

Safety

Warnings for use

Warning!

1. Do not pull or deform the power sup-

ply cord. Pulling and misuse of the

power supply cord can result in dam-

age to the unit and cause electrical

shock.

2. Be careful not to expose your body

directly to the outlet air for a long

time. It may affect your physical con-

ditions.

3. When using the Heatpump for in-

fants, children, elderly, bedridden, or

disabled people make sure the room

temperature is suitable for those in

the room.

4. Never insert objects into the unit. In-

serting objects can result in injury

due to the high speed rotation of in-

ternal fans.

5. Ground the Heatpump without fail.

Do not connect the grounding wire

to gas pipe, water pipe, lightning rod

or telephone grounding wire. Incom-

plete grounding may cause electric

shock.

6. If anything is abnormal with the air

conditioner (ex. a burning smell),

stop the operation immediately and

turn the circuit breaker OFF.

7. The appliance shall be installed in ac-

cordance with national wiring regu-

lations. Improper cable connection

can cause the power supply cord,

plug and the electrical outlet to over-

heat and cause fire.

8. If the supply cord is damaged, it

must be replaced by the

manufacturer or its service agent or

a similarly qualified person in order to

avoid a hazard. Use only the manu-

facture-specified power cord for re-

placement.

Warnings for installation/removal/repair

Warning! Do not attempt to install/

remove/repair the unit by yourself.

Incorrect work will cause electric shock,

water leak, fire etc. Consult your dealer

or other qualified service personnel for

the installation/removal/repair of the

unit.

electrolux 3

Cautions for use

Caution!

1. Open a window or door periodically

to ventilate the room, especially

when using gas appliances. Insuffi-

cient ventilation may cause oxygen

shortage.

2. Do not operate the buttons with wet

hand. It may cause electric shock.

3. For safety, turn the circuit breaker

off when not using the unit for an

extended period of time.

4. Check the outdoor unit mounting

rack periodically for wear and to

make sure it is firmly in place.

5. Do not put anything on the outdoor

unit nor step on it. The object or the

person may fall down or drop, caus-

ing injury.

6. This unit is designed for residential

use. Do not use for other applica-

tions such as in a kennel or green-

house to raise animals or grow

plants.

7. Do not place a vessel with water on

the unit. If water penetrates into the

unit, electrical insulations may

deteriorate and cause electric

shock.

8. Do not block the air inlets nor outlets

of the unit. It may cause insufficient

performance or troubles.

9. Be sure to stop the operation and

turn the circuit breaker off before

performing any maintenance or

cleaning. A fan is rotating inside the

unit and you may get injured.

10. Do not splash or pour water directly

on the unit. Water can cause elec-

trical shock or equipment damage.

11. This appliance is not intended for

use by young children or infirm per-

sons without supervision. Young

children should be supervised to en-

sure that they do not play with the

appliance.

Cautions for location/installation

Caution!

• Make sure to connect the Heatpump

to power supply of the rated voltage

and frequency.

Use of a power supply with improper

voltage and frequency can result in

equipment damage and possible fire.

Install the unit in a place with minimal

dust, fumes and moisture in the air.

• Do not install the unit in a place where

inflammable gas may leak. It may

cause fire.

• Arrange the drain hose to ensure

smooth drainage. Insufficient drain-

age may cause wetting of the room,

furniture etc.

• Make sure a leak breaker or a circuit

breaker is installed, depending on the

installation location, to avoid electrical

shock.

4 electrolux

Description Of The Appliance

Indoor unit

OPERATION

TIMER

TURBO

CLEAN

14

13

16

15

12

1 2 3

10

11

9 8

4

5

6

7

1 Inlet (Air)

2 Open Panel

3 Air Purifying Filter

4 Air Filter

5 AUX Button

6 Receiver Window

7 Power Supply Cord

8 Vertical Adjustment Louvre

9 Horizontal Adjustment Louvre

10 Outlet (Air)

11 Remote Control

12 PLASMACLUSTER Lamp (blue)

13 OPERATION Lamp (red)

14 TIMER Lamp (orange)

15 TURBO Lamp (green)

16 CLEAN Lamp (green)

Outdoor unit

1

2

3

4

1 Inlet (Air)

2 Refrigerant Tube and Interconnecting

Cord

3 Drainage Hose

4 Outlet (Air)

Actual units might vary slightly from those

shown above.

electrolux 5

Remote control

CLEAN

FAN

SET/C

OFF 1HR

DISPLAY

INDIRECT AIR TURBO

SWING

CLOCK

SET

TIME ADJUST

TEMP

ON

OFF

PLASMA

CLUSTER

TIMER

ON

TIMER

OFF

MODE

TIMER

1

2

3

4

5

21

20

19

18

17

16

15

6

7

8

9

10

11

12

13

14

1 TRANSMITTER

2 DISPLAY (Liquid Crystal Display)

3 ON/OFF Button

4 THERMOSTAT Button

5 TURBO Button

6 TIMER ON Button (for setting the timer)

7 TIMER OFF Button (for setting the timer)

8 ONE-HOUR OFF TIMER Button

9 TIME ADVANCE Button

10 TIME REVERSE Button

11 SELF CLEAN Button

12 TIMER SET/CANCEL (SET/C)Button

13

SWING Button (

: horizontal direction)

14 CLOCK Button

15 Indicates battery compartment is below

this mark

16

SWING Button (

: vertical direction)

17 FAN Button

18 MODE Button

19 INDIRECT AIR Button

20 DISPLAY Button

21 PLASMACLUSTER Button

6 electrolux

L.C.D. Remote Control Display

1

2

3

4

5

6

7

8

9

10

11

1 INDIRECT AIR Symbol

2 SELF CLEAN Symbol

3 PLASMACLUSTER Symbol

4 MODE Symbols

: AUTO

: HEAT

: COOL

: DRY

5 Thermostat setting for AUTO and DRY

modes

6 TEMPERATURE Indicator

7 TRANSMITTING Symbol

8 TURBO Symbol

9 FAN SPEED Symbols

: AUTO

: HIGH

: LOW

: SOFT

10 TIMER ON Indicator/CLOCK

Indicates the on timer preset time or cur-

rent time.

11 TIMER OFF Indicator

Indicates the preset time for off timer or

one-hour off timer.

Before The First Use

Loading batteries

Use two size-AAA (R03) batteries.

1. Remove the remote control cover.

2. Insert batteries in the compartment, mak-

ing sure the + and - polarities are correctly

aligned.

– The display indicates “AM 6:00” when

batteries are properly installed.

+

-

+

-

1

1 Remote control cover

3. Reinstall the cover.

• The battery life is approximately one year

in normal use.

• When you replace the batteries, always

change both batteries, and make sure they

are the same type.

• If the remote control does not operate

properly after replacing the batteries, take

out the batteries and reinstall them again

after 30 seconds.

• If you will not be using the unit for a long

time, remove the batteries from the remote

control.

How to use the remote control

Point the remote control towards the unit’s

signal receiver window and press the desired

button. The unit generates a beep when it

receives the signal.

electrolux 7

• Point the remote control towards the unit’s

signal receiver window and press the de-

sired button. The unit generates a beep

when it receives the signal.

• The remote control can send signals from

up to 7 metres away.

Caution!

• Do not allow the signal receiver win-

dow to receive strong direct sunlight,

since it can adversely affect its opera-

tion. If the signal receiver window is

exposed to direct sunlight, close a

curtain to block the light.

• Do not allow the signal receiver win-

dow to receive strong direct sunlight,

since it can adversely affect its opera-

tion. If the signal receiver window is

exposed to direct sunlight, close a

curtain to block the light.

• The unit can be affected by signals

transmitted from the remote control of

a television, VCR or other equipment

used in the same room.

• Do not leave the remote control in di-

rect sunlight or near a heater. Also,

protect the unit and remote control

from moisture and shock which can

discolour or damage them.

Set current clock time

There are two clock modes: 12-hour mode

and 24-hour mode.

Example: 5 o’clock in the afternoon

Clock Display

12-hour mode PM 5:00

24-hour mode 17:00

1. To set to the 12-hour mode, press the

CLOCK button once in the first step. To

set to the 24-hour mode, press the

CLOCK button twice in the first step.

2. Press the TIME ADVANCE or REVERSE

button to set the current time.

– Keep the button pressed to advance or

reverse the time display quickly.

3. Press the SET/C button.

– The colon (:) blinks to indicate that the

clock is functioning.

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

2

3

1

• The current time cannot be set when the

timer is operating.

Setting air purifying filter

The air purifying filters are packed as

accessory of this unit. During operation of the

air conditioner, the filters remove dust and

8 electrolux

tobacco smoke from the air and discharges

clean air.

1. Take out the air filters.

a) Open the open panel.

b) Push the air filters up slightly to unlock

them.

c) Pull the air filters down to remove

them.

a

b

c

2. Set the air purifying filter under the filter

stoppers located on the air filter.

3

1

2

1 Air purifying filter

2 Air filter

3 Filter stopper

3. Reinstall the air filters.

a) Reinstall the air filters in the original

positions.

b) Close the open panel.

c) Push the arrow-marked of the panel

firmly to lock it in place.

a

b

c

Caution!

• The filters are sealed in a plastic bag

to keep their dust collection effect.

• Do not open the bag until using the

filters. (Otherwise the filters life may

get shorter.)

• Do not expose the filters to direct sun-

light. (Otherwise they may deterio-

rate.)

Operating The Appliance

Auxiliary mode

Use this mode when the remote control is not

available.

To turn on

Lift the open panel of the indoor unit and

press the AUX button.

• The red OPERATION lamp on the unit will

light and the unit will start operating in the

AUTO mode.

• The fan speed and temperature setting are

set to AUTO.

To turn off

Press the AUX button again.

• The red OPERATION lamp on the unit will

turn off.

1

1 AUX button

• If the AUX button is pressed during normal

operation, the unit will turn off.

electrolux 9

Basic operation

CLEAN

FAN

SET/C

OFF 1HR

DISPLAY

INDIRECT AIR TURBO

SWING

CLOCK

SET

TIME ADJUST

TEMP

ON

OFF

PLASMA

CLUSTER

TIMER

ON

TIMER

OFF

MODE

TIMER

2

5

3

1

4

1. Press the MODE button to select the

operation mode.

AUTO HEAT COOL DRY

2. Press the ON/OFF button to start opera-

tion.

– The red OPERATION lamp on the unit

will light.

3. Press the THERMOSTAT button to set

the desired temperature.

Auto/dry mode

The temperature can be changed in 1°C

increments within the range of 2°C higher

to 2°C lower from the temperature

automatically determined by the air

conditioner.

(Example: 1°C higher)

C

(Example: 2°C lower)

C

Heat/cool mode

The temperature can be set within the

range of 18 to 32°C.

4. Press the FAN button to set the desired

fan speed.

AUTO SOFT LOW HIGH

In the DRY mode, the fan speed is preset

to AUTO and cannot be changed.

5. To turn off the unit, press the ON/OFF

button again.

The red OPERATION lamp on the unit will

turn off.

Tips about auto mode

In the AUTO mode, the temperature setting

and mode are automatically selected ac-

cording to the room temperature and out-

door temperature when the unit is turned on.

Modes and Temperature Settings

29

21

281810034

°C

24°C

25°C

22°C

23°C24°C

26°C

1

2

3

4

5

1 Indoor temperature (°C )

2 outdoor temperature (°C )

3 Heat

4 Dry (room temp. - 2°C)

5 Cool

The figures on chart are temperature settings

During operation, if the outdoor temperature

changes, the temperature settings will

automatically slide as shown in the chart.

10 electrolux

Mode Changeover

During seasons when you need HEAT-

ING at night and COOLING at daytime ,

or if the room temperature should be-

come extremely higher than the

temperature setting, due to

supplementary heating equipment, the

mode will automatically switch between

HEAT and COOL mode to keep the

comfortable room temperature.

Adjusting vertical air flow direction

1.

Press the SWING button (

) on the re-

mote control once.

– The vertical adjustment louvre will

swing continuously.

2.

Press the SWING button (

) again

when the vertical adjustment louvre is at

the desired position.

– The louvre will stop moving within the

range shown in the diagram.

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

1

2

Adjustment range

HEAT mode

COOL and DRY

modes

Adjusting horizontal air flow direction

1.

Press the SWING button (

) on the

remote control once.

– The horizontal adjustment louvres will

swing continuously.

2.

Press the SWING button (

) again

when the horizontal adjustment louvres

are at the desired position.

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

1

2

• The adjusted position will be memorized

and will be automatically set to the same

position when operated the next time.

• The adjustment range is narrower than the

SWING range in order to prevent conden-

sation from dripping.

electrolux 11

Caution! Never attempt to adjust the

louvres manually.

• Manual adjustment of the louvres can

cause the unit to malfunction.

• When the vertical adjustment louvre is

positioned at the lowest position in the

COOL or DRY mode for an extended

period of time, condensation may re-

sult.

Indirect air

Press the INDIRECT AIR button during cool-

ing or dry operation when you do not want to

feel cold air. The vertical adjustment louvre is

set obliquely upward to deliver cool air to the

ceiling.

Press the button during heating operation.

The vertical adjustment louvre is set down-

ward to deliver the warm air down to the

floor.

1. During operation, press the INDIRECT

AIR button.

DISPLAY

INDIRECT AIR TURBO

TEMP

ON

OFF

PLASMA

CLUSTER

1

–

The remote control will display

To cancel

Press the INDIRECT AIR button again.

• The INDIRECT AIR setting is cancelled

when you press TURBO button while IN-

DIRECT AIR is set.

• If you want INDIRECT AIR operation in

TURBO mode, press INDIRECT AIR but-

ton during TURBO operation.

Turbo operation

In this operation, the air conditioner works at

the maximum power and optimum louvre di-

rection to make the room cool or warm

rapidly.

1. During operation, press the TURBO but-

ton.

DISPLAY

INDIRECT AIR TURBO

TEMP

ON

OFF

PLASMA

CLUSTER

1

–

The remote control will display

– The temperature display will go off.

– The green TURBO lamp on the unit will

light up.

To cancel

Press the TURBO button again.

– The TURBO operation will also be cancel-

led when the operation mode is changed,

or when the unit is turned off.

– The green TURBO lamp on the unit will turn

off.

• The Heatpump will operate at “Extra

HIGH” fan speed for 5 minutes, and then

shift to “HIGH” fan speed. The vertical ad-

justment louvre will be set automatically to

a diagonally lower direction, though it can

be changed if necessary.

• You can not set the temperature or fan

speed during the TURBO operation.

• To turn off the TURBO lamp, press the

DISPLAY button.

Plasmacluster operation

The Plasmacluster Ion generator inside the

Heatpump will release positive and negative

plasmacluster ions into the room.

Approximately the same number of positive

and negative ions released into the air will re-

duce some airborne mold.

1. During operation, press the PLAS-

MACLUSTER button.

12 electrolux

DISPLAY

INDIRECT AIR TURBO

TEMP

ON

OFF

PLASMA

CLUSTER

1

–

The remote control will display

– The blue PLASMACLUSTER lamp on

the unit will light up.

To cancel

Press the PLASMACLUSTER button again.

– The PLASMACLUSTER lamp on the unit

will turn off.

• Use of the PLASMACLUSTER operation

will be memorized, and it will be activated

the next time you turn on the air

conditioner.

• To turn off the PLASMACLUSTER lamp,

press the DISPLAY button.

• To perform the PLASMACLUSTER opera-

tion without accompanying heat, cool or

dry mode, press the PLASMACLUSTER

button while the unit is not operating. The

mode symbol of the remote control will go

off and the fan speed can not be set AUTO.

Self clean operation

SELF CLEAN operation will provide effect to

reduce the growth mold fungus, and to dry

inside of the Heatpump unit with Plasmaclus-

ter ions. Utilize the operation at seasonal

change over terms.

1. Press the SELF CLEAN button when the

unit is not operating.

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

1

–

The remote control displays

– The red OPERATION lamp, the green

CLEAN lamp and the blue PLAS-

MACLUSTER lamp on the unit will light

up.

– The unit will stop operation after forty

minutes.

To cancel

Press the SELF CLEAN button.

Alternatively, turn the unit off by pressing the

ON/ OFF button.

– The red OPERATION lamp, the green

CLEAN lamp and the blue PLASMACLUS-

TER lamp on the unit will turn off.

• You cannot set the temperature, fan

speed, air flow direction or timer setting

during the SELF CLEAN operation.

• Mold fungus already grown can not be

eliminated by this operation.

One-hour off timer

When the ONE-HOUR OFF TIMER is set, the

unit will automatically turn off after one hour.

1. Press the ONE-HOUR OFF TIMER but-

ton.

electrolux 13

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

1

2

–

The remote control displays

– The orange TIMER lamp on the unit will

light up.

– The unit will stop operating after one

hour.

2.

To cancel

Press the TIMER CANCEL (SET/C) but-

ton.

– The orange TIMER lamp on the unit will

turn off.

Alternatively, turn the unit off by pressing the

ON/ OFF button.

– The red OPERATION lamp and the orange

TIMER lamp on the unit will turn off.

• The ONE-HOUR OFF TIMER operation

has priority over TIMER ON and TIMER

OFF operations.

• If the ONE-HOUR OFF TIMER is set while

the unit is not operating, the unit will oper-

ate for an hour at the formerly set condi-

tion.

• If you wish to operate the unit for another

hour before the ONE-HOUR OFF TIMER is

activated, press the ONE-HOUR OFF

TIMER button again during operation.

• If TIMER ON and/or TIMER OFF are set,

TIMER CANCEL (SET/C) button cancels

every setting.

Timer off operation

1.

Press the TIMER OFF (

) button.

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

1

2

3

2. The TIMER OFF indicator will blink; press

the TIME ADVANCE or REVERSE button

to set the desired time.

(The time can be set in 10-minute incre-

ments.)

3. Point the remote control at the receiver

window on the unit and press the TIMER

SET (SET/C) button.

– The orange TIMER lamp on the unit will

light.

– The unit will generate a beep when it

receives the signal.

Tips about timer off operation

When the TIMER OFF mode is set, the

temperature setting is automatically adjusted

to prevent the room from becoming

excessively hot or too cold while you sleep.

(Auto Sleep function) The Auto Sleep func-

tion will not activate during the AUTO mode.

Heat mode:

• One hour after the timer operation begins,

the temperature setting drops 3°C lower

than the original temperature setting.

Cool/dry mode:

• One hour after the time operation begins,

the temperature setting rises 1 °C higher

than the original temperature setting.

14 electrolux

Timer on operation

1.

Press the TIMER ON (

) button.

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

1

2

3

2. The TIMER ON indicator will blink; press

the TIME ADVANCE or REVERSE button

to set the desired time.

(The time can be set in 10-minute incre-

ments.)

3. Point the remote control at the receiver

window on the unit and press the TIMER

SET (SET/C) button.

– The orange TIMER lamp on the unit will

light.

– The unit will generate a beep when it

receives the signal.

4. Select the operation condition.

• The unit will turn on prior to the set time to

allow the room to reach the desired

temperature by the programmed time.

(Awaking function)

Timer cancel/change operation

To cancel timer mode

1. Press the TIMER CANCEL (SET/C) but-

ton.

– The orange TIMER lamp on the unit will

turn off.

– The current clock time will be displayed

on the remote control.

CLEAN

FAN

SET/C

OFF 1HR

SWING

CLOCK

SET

TIME ADJUST

TIMER

ON

TIMER

OFF

MODE

TIMER

1

• If any TIMER ON, TIMER OFF and ONE-

HOUR OFF TIMER are set, the TIMER

CANCEL (SET/C) button cancels all set-

tings.

To change time setting

Cancel the TIMER setting first, then set it

again.

Timer on/off operation (combined use)

You can use the ON and OFF timers in com-

bination.

Example:

To stop operation at 11:00 p.m. and resume

operation to bring the room temperature to

the desired level by 7:00 a.m.

1. Set the TIMER OFF to 11:00 p.m. during

operation.

2. Set the TIMER ON to 7:00 a.m.

–

The arrow (

or ) between the

TIMER ON indicator and the TIMER

OFF indicator shows which timer will

activate first.

• You cannot programmed the ON-TIMER

and OFF-TIMER to operate the unit at dif-

ferent temperatures or other settings.

• Either timer can be programmed to acti-

vate prior the other.

electrolux 15

Additional Information On Use

Tips on saving energy

Below are some simple ways to save

energy when you use your Heatpump.

Set the correct temperature

• Setting the thermostat 1°C higher than the

desired temperature in the COOL mode

and 2°C lower in the HEAT mode will save

approximately 10 percent in power con-

sumption.

• Setting the temperature lower than

necessary during cooling operation will re-

sult in increased power consumption.

Block direct sunlight and prevent drafts

• Blocking direct sunlight during cooling

operation will reduce power consumption.

• Close the windows and doors during cool-

ing and heating operations.

Set proper air flow direction to obtain the

best air circulation

Keep filter clean to ensure the most efficient

operation

Make most of the timer off function

Disconnect the power cord when the unit is

not used for an extended period of time

• The indoor unit still consumes a small

amount of power when it is not operating.

Operating temperature range

Indoor temp. Outdoor temp.

Heating upper limit 27˚C 24˚C

lower limit 5˚C –20˚C

Cooling

upper limit 32˚C 43˚C

lower limit 21˚C –10˚C

• The built-in protective device may prevent

the unit from operating when used out of

this range.

• Condensation may form on the air outlet if

the unit operates continuously in the

COOL or DRY mode when humidity is over

80 percent.

When power failure occurs

This Heatpump has a memory function to

store settings when a power failure occurs.

After power recovery, the unit will

automatically restart in the same settings

which were active before the power failure,

except for timer settings.

If the timers were set before a power failure,

they will need to be re-set after power recov-

ery.

Preheating function

In the HEAT operation, the indoor fan may

not start for two to five minutes after the unit

is turned on to prevent cold air from blowing

out of the unit.

De-icing function

• When ice forms on the heat exchanger in

the outdoor unit during the HEAT opera-

tion, an automatic de-icer provides heat

for about 5 to 10 minutes to remove the

ice. During de-icing, the inside and outside

fans stop operating.

• After de-icing is completed, the unit

automatically resumes operation in the

HEAT mode.

Heating efficiency

• The unit employs a heat pump that draws

heat from the outside air and releases it

into the room. The outside air temperature

therefore greatly affects the heating

efficiency.

• If the heating efficiency is reduced due to

low outside temperatures, use an

additional heater.

• It takes time to warm up and heat the entire

room because of the forced air circulation

system.

Cleaning And Care

Caution! Be sure to disconnect the

power cord from the wall outlet or turn

off the circuit breaker before performing

any maintenance.

Cleaning the filters

The air filters should be cleaned every two

weeks.

1. Turn off the unit.

2. Remove the filters.

16 electrolux

a) Lift the open panel.

b) Push the air filters up slightly to unlock

them.

c) Pull the air filters down to remove

them.

a

b

c

3. Take off the air purifying filters from the air

filters.

4. Clean the filters.

Use a vacuum cleaner to remove dust. If

the filters are dirty, wash them with warm

water and a mild detergent. Dry filters in

the shade before reinstalling.

5. Reinstall the air purifying filters.

6. Reinstall the filters.

a) Reinstall the filters in the original po-

sitions.

b) Close the open panel.

c) Push the arrow-marked of the panel

firmly to lock it in place.

a

b

c

Changing the air purifying filter

The filters should be changed every 3 ~ 6

months

1. Remove the air filters.

2. Change the air purifying filters.

a) Take off the old air purifying filters

from the air filters.

b) Set the new air purifying filters, under

the filter stoppers located on the air

filters.

3

1

2

1 Air purifying filter

2 Air filter

3 Filer stopper

3. Reinstall the air filters.

• The dirty air purifying filters are not washa-

ble for reuse. The new filters are available

at your nearest dealer.

Disposal of Filters

Please dispose of replaced filters ac-

cording to the local disposal laws and

regulations.

Air purifying filter materials

Filter: Polypropylene

Frame: Polyester

Cleaning the unit and the remote control

• Wipe them with a soft cloth.

• Do not directly splash or pour water on

them. It can cause electrical shock or

equipment damage.

• Do not use hot water, thinner, abrasive

powders or strong solvents.

electrolux 17

Maintenance after Heatpump season

1. Operate the unit in the SELF CLEAN

operation to allow the mechanism to

thoroughly dry.

2. Stop the operation and unplug the unit.

Turn off the circuit breaker, if you have

one exclusively for the air conditioner.

3. Clean the filters, then reinstall them.

Maintenance before Heatpump season

1. Make sure that the air filters are not dirty.

2. Make sure that nothing obstructs the air

inlet or outlet.

What To Do If

The following conditions do not denote

equipment malfunctions

Problem Remedy

Unit does not operate The unit will not operate if it is turned on

immediately after it is turned off. The unit will not

operate immediately after the mode is changed.

This is to protect the internal mechanisms. Wait 3

minutes before operating the unit.

Unit does not send out warm air The unit is preheating or de-icing.

Odors Carpet and furniture odors that entered into the

unit may be sent out from the unit.

Water vapour • In the HEAT operation, water vapour may flow

out of the outdoor unit during de-icing.

• In the COOL and DRY operation, water vapour

can sometimes be seen at the air outlet due to

the difference between the room air tempera-

ture and the air discharged by the unit.

The outdoor unit does not stop After stopping the operation, the outdoor unit will

rotate its' fan for about a minute to cool down the

unit.

Odor emitted from the Plasmacluster air outlet This is the smell of ozone generated from the

Plasmacluster Ion generator. The ozone concen-

tration is very small, posing no adverse effect on

your health. The ozone discharged into the air

rapidly decomposes, and its density in the room

will not increase.

If the unit appears to be malfunctioning,

check the following points before calling

for service.

Problem What should be checked

If the unit fails to operate Check to see if the circuit breaker has tripped or

the fuse has blown.

If the unit fails to heat (or cool) the room effectively • Check to see if the circuit breaker has tripped

or the fuse has blown.

• Check the outdoor unit to make sure nothing is

blocking the air inlet or outlet.

• Check the thermostat is proper setting.

• Make sure windows and doors are closed

tightly.

• A large number of people in the room can pre-

vent the unit from achieving the desired

temperature.

• Check whether any heat-generating appliances

are operating in the room.

18 electrolux

Problem What should be checked

If the unit fails to receive the remote control signal • Check whether the remote control batteries

have become old and weak.

• Try to send the signal again with the remote

control pointed properly towards the unit’s sig-

nal receiver window.

• Check whether the remote control batteries are

installed with the polarities properly aligned.

Please call for service when OPERA-

TION lamp, TIMER lamp and/or PLAS-

MACLUSTER lamp on the unit blink.

Environment Concerns

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead

it should be taken to the appropriate

collection point for the recycling of electrical

and electronic equipment. By ensuring this

product is disposed of correctly, you will help

prevent potential negative consequences for

the environment and human health, which

could otherwise be caused by inappropriate

waste handling of this product. For more

detailed information about recycling of this

product, please contact your local council,

your household waste disposal service or the

shop where you purchased the product.

A. Information on Disposal for Users

(private households)

•

In the European Union

Caution! If you want to dispose of this

equipment, please do not use the

ordinary dust bin!

Used electrical and electronic equipment

must be treated separately and in accord-

ance with legislation that requires proper

treatment, recovery and recycling of used

electrical and electronic equipment.

Following the implementation by member

states, private households within the EU

states may return their used electrical and

electronic equipment to designated collec-

tion facilities free of charge

1)

. In some coun-

tries

12345)

your local retailer may also take

back your old product free of charge if you

purchase a similar new one.

If your used electrical or electronic equipment

has batteries or accumulators, please dis-

pose of these separately beforehand accord-

ing to local requirements.

By disposing of this product correctly you will

help ensure that the waste undergoes the

necessary treatment, recovery and recycling

and thus prevent potential negative effects

on the environment and human health which

could otherwise arise due to inappropriate

waste handling.

B. Information on Disposal for Business

Users.

•

In the European Union

If the product is used for business purposes

and you want to discard it:

Please contact your ELECTROLUX dealer

who will inform you about the take-back of

the product. You might be charged for the

costs arising from take-back and recycling.

Small products (and small amounts) might be

taken back by your local collection facilities.

For Spain: Please contact the established

collection system or your local authority for

take-back of your used products.

C. Information before disposal of the

Heatpump containing refrigerant

R410A.

Before dismounting the product for disposal,

the appliance has to be emptied for refriger-

ant. The gas has a server impact on the

greenhouse effect and must not be dis-

posed in the air because of environmental

aspects. This has to be done by an author-

ized professional in accordance with local

legal regulation. After emptied the gas, the

product should be treated as other electrical

and electronic appliances.

1) Please contact your local authority for further details.

electrolux 19

European Guarantee

This appliance is guaranteed by Electrolux in

each of the countries listed at the back of this

user manual, for the period specified in the

appliance guarantee or otherwise by law. If

you move from one of these countries to

another of the countries listed, the appliance

guarantee will move with you subject to the

following qualifications:-

• The appliance guarantee starts from the

date you first purchased the appliance

which will be evidenced by production of a

valid purchase document issued by the

seller of the appliance.

• The appliance guarantee is for the same

period and to the same extent for labour

and parts as exists in your new country of

residence for this particular model or range

of appliances.

• The appliance guarantee is personal to the

original purchaser of the appliance and

cannot be transferred to another user.

• The appliance is installed and used in ac-

cordance with instructions issued by Elec-

trolux and is only used within the home, i.e.

is not used for commercial purposes.

• The appliance is installed in accordance

with all relevant regulations in force within

your new country of residence.

The provisions of this European Guarantee

do not affect any of the rights granted to you

by law.

www.electrolux.com

Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane

Belgique/België/Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502

Lembeek

Česká republika +420 2 61 12 61 12 Budějovická 3, Praha 4, 140 21

Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Frederi-

cia

Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429

Nürnberg

Eesti +37 2 66 50 030 Pärnu mnt. 153, 11624 Tallinn

España +34 902 11 63 88 Carretera M-300, Km. 29,900

Alcalá de Henares Madrid

France www.electrolux.fr

Great Britain +44 8705 929 929 Addington Way, Luton, Bed-

fordshire LU4 9QQ

Hellas +30 23 10 56 19 70 4, Limnou Str., 54627

Thessaloniki

Hrvatska +385 1 63 23 338 Slavonska avenija 3, 10000 Za-

greb

Ireland +353 1 40 90 753 Long Mile Road Dublin 12

Italia +39 (0) 434 558500 C.so Lino Zanussi, 26 - 33080

Porcia (PN)

Latvija +37 17 84 59 34 Kr. Barona iela 130/2, LV-1012,

Riga

Lietuva +370 5 278 06 03 Ozo 10a, LT-08200 Vilnius

Luxembourg +352 42 431 301 Rue de Bitbourg, 7, L-1273

Hamm

Magyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet

királyné útja 87

20 electrolux

Leht laaditakse ...

Electrolux EXH12HX1WE Kasutusjuhend

See juhend sobib ka

Electrolux EXH12HX1WE Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid