RED Wire (A) on Camera Loom:
Connect to an ignition LIVE.
BLACK Wire on Camera Loom:
Connect to black/earth wire on the MUD
Piggy-Back loom.
Yellow RCA Wire on Camera Loom:
Connect to RCA extension cable and run
forwards to yellow RCA socket on the
back of the head-unit. You can ignore
the separate red wire (B) on the RCA
cable.
Red Wire on Reverse Lamp Piggy-Back
Loom:
Connect to the purple/white camera
input wire on the back of the head-unit
labelled ‘Reverse’
Black Wire on Piggy-Back Loom.
Connect to the black/earth wire on
camera loom
A
B
Reverse input from Piggy-Back loom/
Reverse lamp connects into
Purple/White wire marked ‘Reverse’.
*** If the image on your head unit screen is reversed, flip the image in your head unit menu settings.
If your head unit doesn’t have an image flip function, cut the small green/blue wire loop on the camera
harness to reverse the image.
Optimill Reverse Camera installation for JVC KD-X561DBT (Single DIN)
Yellow RCA cable input from camera
Universal Optimill Reverse Camera installation
ww
Black Plug
Connect to corresponding plug on Camera
Harness
Red Wire (A)
Connect to Red Wire on Reverse Lamp
Piggy Back Loom.
Black Wire
Connect to Black wire on Reverse Lamp
Piggy Back Loom
Yellow RCA plug
Connect to yellow RCA socket on the back
of head unit/reverse monitor normally
labelled ‘Camera’
Extra Red Wire (B) on Yellow RCA plug
Connect to the wire on back of head unit
labelled ‘reverse’, normally purple in
colour.
Note: To create a separate switched
camera supply you can install a switch into
this red wire to provide a manual off/on
override function for the camera.
MUD Piggy Back Loom
Connect the loom directly into the back of
the reverse lamp to provide the reverse
feed to camera.
Red Wire
Connect to red wire on camera harness.
Black Wire
Connect to Black wire on camera harness.
A
B
www.mudstuff.co.uk
*** If the image on your head unit screen is reversed, flip the image in your head unit menu settings.
If your head unit doesn’t have an image flip function, cut the small green/blue wire loop on the camera
harness to reverse the image.
-
1
-
2
teistes keeltes
- English: JVC KD-X561DBT Installation guide
Seotud paberid
Muud dokumendid
-
Tiandy TC-D2410-AW Kasutusjuhend
-
Dante DLC1981 Kasutusjuhend
-
Regent HT-391 Kasutusjuhend
-
Trane Tracer Summit Hardware And Software Installation Manual
-
Panasonic HDCHS9 Kasutusjuhend
-
Trigger 2008-6 paigaldusjuhend
-
Samsung LE32B541P7W Kasutusjuhend
-
Sanyo SAP-CRV93EHN Technical & Service Manual
-
Samsung LE32B350F1W Kasutusjuhend
-
Samsung LE22C330F2W Lühike juhend
