JVC GZ-RX510 Kasutusjuhend

Tüüp
Kasutusjuhend

See käsiraamat sobib ka

CAMCORDER
C5B7_RX515_EU_EN
Detailed User Guide
GZ-RX515
GZ-RX510
Table of Contents
Getting Started
Verifying the Accessories ........................................................ 4
Turning on this Unit ..................................................................
5
Opening the Terminal Cover (SD Card Cover) ........................ 5
Charging .................................................................................. 6
Resetting this Unit .................................................................... 6
Quad Proof .............................................................................. 7
Before Using Underwater or under Low Temperature .......... 7
Grip Adjustment ....................................................................... 9
Attaching the Core Filter .......................................................... 9
Inserting an SD Card ............................................................. 10
Types of Usable SD Card ................................................... 10
Using the Touch Screen ........................................................ 12
Locking the Screen (when Shooting Underwater) .............. 12
Adjusting the Touch Panel ................................................. 13
Names of Buttons and Functions on the LCD Monitor ....... 14
Clock Setting ......................................................................... 17
Resetting the Clock ............................................................ 17
Changing the Display Language ............................................ 18
Holding this Unit .................................................................... 19
Tripod Mounting .................................................................... 19
Using this Unit Overseas ....................................................... 20
Charging the Battery Pack Overseas ................................. 20
Setting the Clock to Local Time when Traveling ................. 20
Setting Daylight Saving Time ............................................. 21
Optional Accessories ............................................................. 21
Recording
Taking Videos in Auto Mode .................................................. 22
Capturing Still Images During Video Recording
................. 25
Taking Still Images in Auto Mode ........................................... 26
Zooming ................................................................................ 28
Manual Recording ................................................................. 29
Adjusting Focus Manually (FOCUS) .................................. 30
Adjusting Brightness .......................................................... 31
Setting Backlight Compensation ........................................ 32
Setting White Balance ........................................................ 33
Taking Close-up Shots (TELE MACRO) ............................ 34
Shooting under Water ............................................................ 35
Recording with Effects ........................................................... 36
Recording Images Like an Old Black and White Photo
(GRAINY MONOCHROME) ........................................... 37
Recording Food Images (FOOD) ....................................... 38
Recording Images of a Baby (BABY) ................................. 39
Recording with Animation Effects (ANIMATION EFFECT) .... 40
Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) ....... 42
Reducing Camera Shake ....................................................... 43
Recording at Intervals (TIME-LAPSE RECORDING) ............. 44
Recording with a Part of the Screen Enlarged in Sub Screen
(CLOSE-UP SUB-WINDOW) ............................................. 46
Taking Group Shots (Self-timer) ............................................ 47
Recording Videos with Date and Time ................................... 48
Checking the Remaining Recording Time ............................. 49
Playback
Playing Back Videos .............................................................. 51
Normal Playback
................................................................ 52
Checking the Recording Date and Other Information ......... 54
MARKING PLAYBACK ...................................................... 55
DIGEST PLAYBACK .......................................................... 59
PLAYBACK OTHER FILE .................................................. 60
Playing Back Still Images ....................................................... 61
Slideshow Playback ........................................................... 62
Connecting to and Viewing on TV .......................................... 63
Connecting via the HDMI Mini Connector .......................... 63
Connecting via the AV Connector ...................................... 65
Editing
Deleting Unwanted Files ........................................................ 66
Deleting the Currently Displayed File
................................. 66
Deleting Selected Files ...................................................... 66
Protecting Files ...................................................................... 67
Protecting/Releasing Protection of the Currently Displayed
File .................................................................................. 67
Protecting/Releasing Protection of Selected Files .............. 68
Capturing a Still Image in the Video During Playback ............ 69
Combining Videos Recorded by Seamless Recording .......... 70
Capturing a Required Part in the Video (TRIMMING) ............ 71
Copying
Dubbing Files to a Disc by Connecting to a Blu-ray Recorder 72
Copying Files to an SD Card
.................................................. 73
Copying to Windows PC ........................................................ 74
Verifying System Requirements (Guideline) ....................... 74
Installing the Provided Software (Built-in) ........................... 77
Backing Up All Files ........................................................... 79
Organizing Files ................................................................. 80
Recording Videos to Discs ................................................. 81
Backing Up Files Without Using Provided Software ........... 83
List of Files and Folders ..................................................... 84
Copying to Mac Computer ..................................................... 85
Using Wi-Fi
Wi-Fi Capabilities ................................................................... 86
Operating Environment
.......................................................... 87
Precautions on Using Wi-Fi ................................................... 87
Image Monitoring via Direct Connection (DIRECT
MONITORING) .................................................................. 88
Image Monitoring via an Access Point at Home (INDOOR
MONITORING) .................................................................. 91
Recording the Location Information ....................................... 94
Changing the Settings ........................................................... 98
Registering Access Point Using Wi-Fi Protected Setup (WPS)
........................................................................................ 99
Registering Access Point Using WPS PIN ....................... 100
Checking the MAC Address of this Camera ..................... 101
Initializing the Wi-Fi Settings ............................................ 101
Using Smartphone Applications ........................................... 102
Indications on the screen ................................................. 102
Using the Markings .......................................................... 103
Using the Game Score ..................................................... 104
Transferring Videos (AVCHD format) ............................... 106
Transferring Still Images .................................................. 109
Smartphone Application Settings ..................................... 111
Troubleshooting ................................................................... 113
Wi-Fi Specifications ............................................................. 117
Using Wi-Fi by Creating a QR Code
DIRECT MONITORING ....................................................... 119
INDOOR MONITORING ...................................................... 122
OUTDOOR MONITORING .................................................. 125
Registering Access Point Manually ...................................... 129
Settings Menu
Operating the Menu ............................................................. 130
Operating the Top Menu
.................................................. 130
RECORD SETTING Menu (video) ....................................... 131
RECORD SETTING Menu (still image) ................................ 136
PLAYBACK SETTING Menu (video) ................................... 138
EDIT Menu (video) ............................................................... 139
PLAYBACK SETTING Menu (still image) ............................ 140
EDIT Menu (still image) ....................................................... 141
SETUP (video/still image) .................................................... 142
CONNECTION SETTINGS (video/still image) ..................... 145
USB CONNECTION MENU ................................................. 146
2
Names of Parts ........................................................... 147
Indications on the LCD monitor ............................... 150
Troubleshooting ......................................................... 153
When the unit is not working properly .................................. 153
Charging
.............................................................................. 153
Power supply ....................................................................... 154
Recording ............................................................................ 154
SD Card ............................................................................... 155
Playback .............................................................................. 155
Editing/Copying ................................................................... 156
Computer ............................................................................. 156
Screen/Image ...................................................................... 157
Other Problems ................................................................... 157
Error Message? ................................................................... 158
Maintenance ............................................................... 160
Specifications ............................................................. 161
Trademarks ................................................................. 163
3
Verifying the Accessories
If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.
Illustration Description
.
AC Adapter
AC-V10E
0
Charges this unit. Attach the charging adapter cable to the tip of the cord.
It can also be used when recording or playing back videos indoors.
.
Charging Adapter Cable
QAM1580-001
0
Attach to the tip of the cord of the AC adapter and connect to the USB connector of this unit to charge.
.
USB Cable
(Type A - Micro Type B)
0
Connects this unit to a computer.
.
AV Cable
E3A-0085-00
0
Connects this unit to a TV to play back recorded images on the TV.
0
Please consult your JVC dealer or the nearest JVC service center when purchasing a new AV cable.
.
Small Core Filter (for AC Adapter)
.
Large Core Filter (AV Cable)
.
Basic User Guide
0
Read well and keep in a safe place where it can be accessed easily when necessary.
Memo :
0
The provided software (application software) is built into this unit.
“Verifying System Requirements (Guideline)” (A p. 74
)
0
The large core filter is for use with an AV cable. Do not use it with any cable other than the AV cable.
The small core filter is for use with the AC adapter. Do not use it with anything other than the AC adapter.
“Attaching the Core Filter” (A p. 9)
0
SD cards are sold separately.
“Types of Usable SD Card” (A p. 10)
0
When using the AC adapter overseas, please prepare a commercially available converter plug for the country or region of visit.
“Charging the Battery Pack Overseas” (A p. 20)
Getting Started
4
Turning on this Unit
Open the LCD monitor to turn on this unit.
To turn off the power, close the LCD monitor.
o
To turn on the power
Open the LCD monitor.
.
o
To turn off the power
Close the LCD monitor.
.
The POWER/ACCESS lamp goes off and the power is turned off.
“POWER/ACCESS (Power/Access) Lamp” (A p. 148
)
Opening the Terminal Cover (SD Card Cover)
o
To open
.
A
Open the LCD monitor.
B
Slide down the cover lock and slide the cover aside.
C
Lift the cover slowly.
o
To close
.
Leave the LCD monitor open first.
A
Flip
down the cover slowly while making sure the gray waterproof seal
fits into the opening at the terminals.
B
Press the entire cover against the camcorder with equal force and firmly
attach the cover completely.
C
Slide the cover until it clicks into place.
The cover is not properly closed if the red mark on the cover lock is visible.
Caution :
0
Ensure that the terminal cover and the gray waterproof seal are not
damaged and that there are no foreign materials (such as hair, lint, sand
or dust) adhered on the cover.
0
Stop using the unit underwater if there are damages to the cover, etc. and
consult your JVC dealer or the nearest JVC service center.
0
Do not apply excessive force when opening/closing the terminal cover.
0
Read the “Cautions on Using Underwater” (A p. 7) before using the
camera underwater or in places exposed to water droplets.
Getting Started
5
Charging
This unit is equipped with a built-in battery.
Open the connector cover, and connect the AC adapter for charging as
shown in the figure.
.
Caution :
0
The built-in battery is not charged at the time of purchase.
0
At
the time of purchase or in case of the battery is not used for a long period
of time, the charging time will be longer than usual. The camera does not
turn on if the remaining battery power is low. In this case, charge the battery
for more than 40 minutes before turning on the power.
0
Charging time: Approx. 6 h 10 m (when charging at 25 )
0
The battery cannot be charged outside the room temperature range of
10°C to 35°C. The CHARGE lamp does not light up when the battery is
not being charged. If the temperature increases or decreases during
charging, the CHARGE lamp will blink slowly and charging will stop. In this
case, remove the AC adapter, press the Reset button and wait until the
room temperature is within the above stated range before charging again.
0
You can record or play back videos during charging. (However, the
charging time will be longer than usual. In addition, the remaining battery
power may decrease according to conditions.) If the internal temperature
rises when using the unit, stop the charging temporarily. (The CHARGE
lamp goes off.)
0
If malfunctions (such as overvoltage) occur, charging will stop. In these
cases, CHARGE lamp blinks quickly as a notification.
0
During charging, the P icon on the screen changes to O to indicate that
charging is in progress. (when the provided AC adapter is used)
0
When the recording time becomes extremely short even when the battery
is fully charged, the battery needs to be replaced. For details on replacing
the built-in battery (subject to a fee), consult the nearest JVC service
center.
Caution :
0
There are certain specifications for a USB rechargeable device. To
charge, use a device with the output voltage of 5 V/1 A or more.
0
Depending
on the specification of your charging device and the thickness
and length of an USB cable used to connect to this unit, the charging time
may be longer than usual, or it may not even start.
0
We shall not be held liable for malfunctions that are due to using non-
standard device or a device with poor quality.
Resetting this Unit
When a malfunction occurs on this unit, reset the unit in the following way.
(Resetting the unit does not erase the recorded data.)
1
Open the terminal cover.
0
Remove the power cord and all connecting cables.
2
Close the LCD monitor to turn off this unit.
3
Press the Reset button gently using an object with pointed tip.
Caution :
0
Press the Reset button just once gently.
0
Do
not use sharp pointed objects. It may damage the unit or cause electric
shock.
Memo :
0
If malfunction persists even after pressing the Reset button, consult the
nearest JVC service center.
Getting Started
6
Quad Proof
This unit is equipped with Waterproof, Dust-proof, Drop-proof and Freeze-
proof features.
.
.
Waterproof:
Equivalent to IEC
Standard publication
529 IPX8 and IPX6 (30
minutes
at depths up to
5 m)
.
Dust-proof: Equivalent
to IEC Standard
publication 529 IP5X
.
Drop-proof: This
camera clears
company testing
compliant with MIL-
STD-810F Method;
516.5
Shock: Dropping onto
plywood 3 cm thick
from a height of 1.5 m
.
Freeze-proof:
Allowable operating
temperatures: −10°C
to +40°C
Note: Temperatures
between −10°C and
0°C temporarily lower
battery performance,
reducing the time
available for
recording.
Caution :
0
There
is no guarantee that there will be no damages when the unit is used
within the above-mentioned limits.
Scratches and dent caused by the impact if the unit is dropped, or other
changes in appearance are not included in the warranty.
0
Malfunction due to mishandling will void the warranty.
0
Before use in water, be sure to read and understand the “Before Using
Underwater or under Low Temperature” (A p. 7) .
0
Close the terminal cover firmly until it clicks and confirm that the red sign
completely goes off.
0
Make sure that there is no damage to and no foreign material adhered to
the packing inside the cover.
0
Use within a water depth of 5 m and a duration of 30 minutes.
0
The waterproof performance cannot be guaranteed if the camcorder is
subject to impact such as dropping.
0
Do not jump or dive into water holding the camcorder.
0
Do not use the camcorder in strong water flows such as in rapids or under
waterfalls. The strong water pressure may impair the waterproof
performance.
0
Do not immerse into hot spring, or hot water above 40°C.
Before Using Underwater or under Low Temperature
“Cautions on Using Underwater” (A p. 7)
“Maintenance after Use” (A p. 8)
“Cautions on Using under Low Temperature” (A p. 8)
“Cautions on Using under Low Temperature” (A p. 8)
Cautions on Using Underwater
Please take note of the followings when using this unit near water or
underwater.
0
Ensure that the cover is closed tightly.
“Opening the Terminal Cover (SD Card Cover)” (A p.
5)
0
Ensure that the terminal cover and the gray waterproof seal are not
damaged and that there are no foreign materials (such as hair, lint, sand
or dust) adhered on the cover.
0
Stop using the unit underwater if there are damages to the cover, etc.
and consult your JVC dealer or the nearest service center.
0
Use within a water depth of 5 m and a duration of 30 minutes.
.
0
Do not open/close the cover or insert/remove an SD card or any cables
while using underwater or on the beach, or if your hands contain water
droplets or sands. Doing so may cause water to enter into the camera or
malfunction.
0
Do
not subject the camera to high pressure or vibration resulted from swift
current, waterfall or diving into water.
0
The waterproof performance is not guaranteed if the camera is dropped
or subjected to other impact shock. If the camera has been subjected to
impact shock, consult your nearest service center.
0
While shooting underwater, noise generated inside of the camera
(zooming sounds, etc) may be picked up. This is not a malfunction.
0
Do not immerse into hot spring, or hot water above 40°C. Doing so
deteriorates waterproof performance.
0
Keep away from hands with sun oil or sun screen. Doing so may cause
discoloration or deterioration of material.
0
This unit sinks underwater. Fasten the grip belt firmly to prevent losing the
camera underwater.
0
The accessories are not waterproof.
0
Wi-Fi function is not available underwater.
Getting Started
7
Maintenance after Use
After using underwater or in dusty places, rinse the camera with water
immediately and dry it completely.
1
Ensure that the terminal cover is closed.
2
Rinse with clean water.
Soak
the camera in a container filled with enough water to immerse the
camera completely, and rinse it gently.
.
0
After using the camera under the sea or on the beach, immerse the
camera in fresh water for about 10 minutes to remove salt particles,
replace the water and rinse the camera.
0
Open and close the LCD screen, and operate the buttons or zoom
operations to get rid of sands or dusts in the gap.
3
Dry the camera.
Wipe
the camera completely with a soft dry cloth and allow it to dry in a
well-ventilated and shady location.
0
Place the camera with the lens facing downward while the LCD
monitor is closed, and leave it for approximately 10 minutes. (By doing
so, microphone and LDC part are dried out easily.) Place the camera
in a up right position on a dry cloth afterward Close the terminal cover
after the camera is dried out completely.
0
Wipe off any foreign materials or water droplets inside the cover.
* If you leave the camera immersed in salt water or allow water droplets from
the salt water to remain on the camera, this may cause corrosion,
discoloration or deterioration of waterproof performance.
* If you wipe or dry the camera with sand particles adhered, this may cause
scratches on the camera.
* Do not wash with chemicals, soap, neutral detergents, or alcohol.
* Do not dry the camera with a hair dryer or other heat sources. This could
impair its waterproof performance.
Cautions on Using under Low Temperature
0
The
performance of the battery will drop temporarily when the temperature
is -10°C to 0°C, this will cause the remaining recording time to shorten.
0
Charging cannot be performed when the surrounding temperature is
below 10 °C.
0
Turning on the camera while it is still cold will deteriorate the performance
of the LCD monitor. Problems such as the screen becoming dark
momentarily or residual image can occur.
0
If snow or water droplets adhere to the camera under sub-zero
temperature environment, ice can formed between the gaps around the
buttons, speaker or microphone. This will cause difficulty in operating the
buttons as well as decrease in the volume level.
0
Direct contact with exposed metal part under cold temperature can cause
the skin to stick on the metal part resulting in injuries such as frostbite. Do
not touch with bare hands.
Other Precautions
0
Do
not leave the camera under low temperature in cold climates or under
high temperature above 40 °C (such as under direct sunlight, inside a
vehicle in the hot sun, or near a heater). This will cause deterioration of
the waterproof performance.
0
Malfunction due to mishandling will void the warranty.
0
We are not responsible for any loss of data due to water entering into inside
of the camera. Please be forewarned.
0
It is recommended to replace the waterproof packing once a year to
maintain the waterproof performance. Consult your nearest service
center. (Subject to a fee)
Getting Started
8
Grip Adjustment
.
A
Open the pad
B
Adjust the length of the belt
C
Close the pad
Caution :
0
Be sure to fasten the grip belt properly.
If the belt is loose, this unit may drop and result in injuries or damages.
Attaching the Core Filter
Attaching
core filter to the cable of the AC adapter and the AV cable (on the
end connected to this unit) can reduce the interference generated when this
unit is connected to an external device.
0
Use the small core filter with the power cable, and the large core filter with
the AV cable.
0
Do not attach the core filter to the provided adapter cable.
.
Getting Started
9
Inserting an SD Card
When a commercially available SD card is inserted, recordings can still be
made
to the card without stopping when the remaining recording time on the
built-in memory runs out.
“Types of Usable SD Card” (A p. 10)
“Approximate Video Recording Time” (A p. 50)
1
Open the terminal cover.
.
2
Close the LCD monitor to turn off this unit.
3
Insert an SD card.
.
Warning
0
Make sure not to insert the SD card in the wrong direction.
It may cause damage to the unit and SD card.
0
Before inserting or removing the SD card, close the LCD monitor and
ensure that the POWER/ACCESS lamp goes off.
0
Do not touch the metal contact area when inserting the SD card.
Memo :
0
When “SEAMLESS RECORDING” is set to “ON”, recordings can still be
made
to the SD card without stopping when the remaining recording time
on the built-in memory runs out.
“ SEAMLESS RECORDING ” (A p. 133)
0
Both videos and still images can be recorded on one SD card. It is
recommended to confirm the video operation of the SD card before usage.
0
To record to an SD card, it is necessary to set the recording media to “SD
CARD”.
“ REC MEDIA FOR VIDEO ” (A p. 143)
“ REC MEDIA FOR IMAGE ” (A p. 144)
0
To use a new SD card, or SD card used on other devices, it is necessary
to format (initialize) the SD card using “FORMAT SD CARD” from the
“SETUP” menu.
“ FORMAT SD CARD ” (A p. 144)
Removing the Card
Push the SD card inward once, then pull it out straight.
.
Types of Usable SD Card
The following SD cards can be used on this unit.
Operations
are confirmed on the SD cards from the following manufacturers.
0
Panasonic
0
TOSHIBA
0
SanDisk
SD Card
.
0
This unit supports 256 MB to 2 GB SD cards.
0
Use a Class 4 or higher compatible SD card (2 GB) for video recording.
SDHC Card
.
0
Use
a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video
recording.
SDXC Card
.
0
Use a Class 4 or higher compatible SDXC card (Max. 128 GB) for video
recording.
Getting Started
10
Memo :
0
Using
SD cards (including SDHC/SDXC cards) other than those specified
above may result in recording failure or data loss.
0
This unit is not guaranteed to operate with all SD cards. Some SD cards
may not work due to specification changes, etc.
0
Do not use a miniSD card or microSD card (even if the card is inserted in
an adapter). It may cause malfunction.
0
To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6 or
higher compliant SDHC/SDXC card is recommended.
0
To select “50p” in “SYSTEM SELECT”, use a Class 6 or higher compliant
SDHC/SDXC card.
0
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of 4
MB/s and 6 MB/s respectively during reading or writing of data.
0
You can also use a Class 10 compliant SDHC/SDXC card.
0
Both videos and still images can be recorded on one SD card. It is
recommended to confirm the video operation of the SD card before usage.
0
To protect the data, do not touch the terminals of the SD card.
0
UHS-I SDHC/SDXC cards can be used in the same manner as standard
SDHC/SDXC cards.
UHS Speed Class is not supported.
0
An SD card which is used for recording and/or editing on other devices
may not be played back or edited on this unit.
0
An SD card which is used for recording on this unit may not be used for
playing back and/or editing on other devices.
When your computer cannot recognize the SDXC card
Confirm and update the OS of your computer.
Windows
Vista
0
Make sure that the operating system version is SP1 or
higher.
0
Download
and install the updating program (KB975823)
from the following URL.
32 bit version
http://www.microsoft.com/downloads/details.aspx?
displaylang=ja&FamilyID=2d1abe01-0942-4f8a-
abb2-2ad529de00a1
http://www.microsoft.com/downloads/en/details.aspx?
FamilyID=2d1abe01-0942-4f8a-abb2-2ad529de00a1
64 bit version
http://www.microsoft.com/downloads/details.aspx?
displaylang=ja&FamilyID=7d54c53f-017c-4ea5-
ae08-34c3452ba315
http://www.microsoft.com/downloads/en/details.aspx?
FamilyID=7d54c53f-017c-4ea5-ae08-34c3452ba315
Windows 7 Download and install the updating program (KB976422)
from the following URL.
32 bit version
http://www.microsoft.com/downloads/details.aspx?
displaylang=ja&FamilyID=3ee91fc2-a9bc-4ee1-
aca3-2a9aff5915ea
http://www.microsoft.com/downloads/en/details.aspx?
FamilyID=3ee91fc2-a9bc-4ee1-aca3-2a9aff5915ea
64 bit version
http://www.microsoft.com/downloads/details.aspx?
displaylang=ja&FamilyID=73f766dd-7127-4445-
b860-47084587155f
http://www.microsoft.com/downloads/en/details.aspx?
FamilyID=73f766dd-7127-4445-b860-47084587155f
Mac OS X
10.4
Tiger /
Mac OS X
10.5
Leopard
Not compatible.
Mac OS X
10.6 Snow
Leopard
Update the OS version to 10.6.5 or later.
Getting Started
11
Using the Touch Screen
The LCD monitor of this unit is a touch panel which enables operations by
touching the screen.
Icon operation buttons, thumbnails, and menu items are displayed on the
touch screen according to the mode in use.
0
There
are two ways to operate the touch screen, namely “tap” and “drag”.
The following are some examples.
A Tap the displayed button (icon) or thumbnail (file) on the touch screen
to make selection.
B Drag the thumbnails on the touch screen to search for the desired file.
.
Memo :
0
The touch screen of this unit is pressure-sensitive. When the touch screen
does not respond smoothly, apply slightly more force to your fingertip.
0
Tap the buttons (icons) on the touch screen accurately. The buttons may
not respond if they are not tapped on the right area.
0
Do not press or rub with excessive force.
0
Do not operate the touch screen using an object with a sharp tip.
0
Pressing two or more places at a time may cause a malfunction.
0
Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is
misaligned with the touched area. (Adjust by lightly tapping with a corner
of an SD card, etc. Do not press with an object with a sharp tip or do not
press hard.)
“Adjusting the Touch Panel” (A p. 13)
0
You cannot operate the touch screen under water. Lock the screen to
prevent operation errors.
“Shooting under Water” (A p. 35)
Locking the Screen (when Shooting Underwater)
Lock the screen before using this unit underwater to prevent operation errors
on the touch screen.
0
Once the screen is locked, operations on the touch screen are disabled.
0
The START/STOP (recording) button and the zoom lever can be used
while the screen is locked.
0
You can set for both video and still image modes.
0
If “SCREEN LOCK” has been set, it will take a longer time for the unit to
power off after closing the LCD monitor.
o
Setting the “SCREEN LOCK”
A
Check that the unit is in the recording mode.
B
Tap “MENU”.
C
Tap “RECORD SETTING”.
D
Tap “SCREEN LOCK”.
0
The L button appears on the screen.
.
o
To cancel “SCREEN LOCK”
Tap the L
button.
Memo :
0
Once
“SCREEN LOCK” is set, only the L button on the touch screen can
be operated.
0
“SCREEN LOCK” cannot be set for the following cases:
- during recording
- when “TIME-LAPSE RECORDING” or “DATE/TIME RECORDING” has
been set
Getting Started
12
Adjusting the Touch Panel
Adjusts the response position of the buttons on the touch screen.
1
Tap “MENU”.
.
2
Tap “SETUP”.
.
3
Tap “TOUCH SCREEN ADJUST”.
.
0
The touch screen adjustment screen appears.
4
Tap “+”. (3 times in total)
.
0
Keep tapping “+” as its position changes with every tap.
0
If areas other than the “+” mark are tapped, errors will occur. Make
sure to tap the “+” mark.
5
Tap “+” again to confirm the adjusted positions. (3 times in total)
.
0
Keep tapping “+” as its position changes with every tap.
6
Tap “OK”.
.
0
Setting ends and returns to the menu screen.
Caution :
0
Do not tap areas other than the “+” mark during touch screen adjustment
(steps 4 - 5). Doing so may cause the touch screen to malfunction.
Memo :
0
Adjust by lightly tapping with a corner of an SD card, etc.
0
Do not press with an object with a sharp tip or do not press hard.
Getting Started
13
Names of Buttons and Functions on the LCD Monitor
The following screens are displayed during the A video and B still image
modes, and operate as touch screens.
Recording Screen (Video/Still Image)
.
1
A/B (Video/Still Image) Mode Button
0
Switches between A video and B still image modes.
2
Zoom Button
“Zooming” (A p. 28)
3
Still Image Recording Button
0
Records still images during video recording.
“Capturing Still Images During Video Recording” (A p. 25
)
4
Playback Mode Button
0
Switches to the playback mode.
5
Recording Start/Stop Button
0
6: Video Recording Start Button
0
7: Video Recording Stop Button
6
Menu Button
“Operating the Menu” (A p. 130)
7
Display Button
Switches the display between full (m) and simple (n) with every tap of
the button.
0
Simple display: Some displays disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The display button changes from n
to m.
0
When the power is turned off, the display setting will revert to simple
display (n).
8
Recording Mode Button
Switches the recording mode (P Intelligent Auto/H Manual).
Playback Screen (Video)
.
0
When
this unit is not operated, the operation buttons on the LCD monitor
disappear automatically. Tap on the screen to display the operation
buttons again.
1
A/B
(Video/Still Image) Mode Button
0
Switches between A video and B still image modes.
2
Video Scene Capture Button
0
Displayed when playback is paused.
0
Saves one scene of the video being played back as a still image.
3
Recording Mode Button
0
Switches to the recording mode.
4
Index Screen (Thumbnail Display) Button
0
Returns to the index screen (thumbnail display).
“Operation Buttons for Video Playback” (A p. 52)
5
Delete Button
“Deleting the Currently Displayed File” (A p. 66)
6
Playback Zoom Button
0
Enlarges the video image that is played back.
“During Video Playback” (A p. 53)
7
Menu Button
“Operating the Menu” (A p. 130)
8
Operation Buttons
“Operation Buttons for Video Playback” (A p. 52)
9
Display Button
Switches the display between full (m) and simple (n) with every tap of
the button.
0
Simple display: Some displays disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The display button changes from n
to m.
0
When the power is turned off, the display setting will revert to simple
display (n).
Getting Started
14
Playback Screen (Still Image)
.
0
When
this unit is not operated, the operation buttons on the LCD monitor
disappear automatically. Tap on the screen to display the operation
buttons again.
1
A/B
(Video/Still Image) Mode Button
0
Switches between A video and B still image modes.
2
Recording Mode Button
0
Switches to the recording mode.
3
Index Screen (Thumbnail Display) Button
0
Returns to the index screen (thumbnail display).
“Operation Buttons for Still Image Playback” (A p. 61)
4
Delete Button
“Deleting the Currently Displayed File” (A p. 66)
5
Playback Zoom Button
0
Enlarges the still image that is being played back.
“Playing Back Still Images” (A p. 62)
6
Menu Button
“Operating the Menu” (A p. 130)
7
Operation Buttons
“Operation Buttons for Still Image Playback” (A p. 61)
8
Display Button
Switches the display between full (m) and simple (n) with every tap of
the button.
0
Simple display: Some displays disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The display button changes from n
to m.
0
When the power is turned off, the display setting will revert to simple
display (n).
Index Screen (Thumbnail Display) Display
.
1
A/B (Video/Still Image) Mode Button
0
Switches between A video and B still image modes.
2
Page Forward/Back Button
“Operation Buttons for Video Playback” (A p. 52
)
“Operation Buttons for Still Image Playback” (A p. 61)
3
Recording Mode Button
0
Switches to the recording mode.
4
Mark Playback button (video only)
0
Allows scenes that are marked to be played back easily.
“ MARKING PLAYBACK ” (A p. 55)
5
Delete Button
“Deleting Selected Files” (A p. 66)
“Deleting the Currently Displayed File” (A p. 66)
6
Playback Media Button
0
Switches between SD card and built-in memory.
7
Menu Button
“Operating the Menu” (A p. 130)
8
Date Button
“Operation Buttons for Video Playback” (A p. 52)
“Operation Buttons for Still Image Playback” (A p. 61)
Getting Started
15
Menu screen (recording mode)
.
1
SILENT Button
“Using the Silent Mode” (A p. 24)
2
INFO. Button
“Checking the Remaining Recording Time” (A p. 49)
3
Wi-Fi Button
“Using Wi-Fi” (A p. 86)
4
SETUP Menu
“SETUP (video/still image)” (A p. 142)
5
CONNECTION SETTINGS Menu
“CONNECTION SETTINGS (video/still image)” (A p. 145)
6
RECORD SETTING Menu
“RECORD SETTING Menu (video)” (A p. 131)
“RECORD SETTING Menu (still image)” (A p. 136)
7
Close Button
Exit the menu.
Menu screen (playback mode)
.
1
SILENT Button
“Using the Silent Mode” (A p. 24)
2
INFO. Button (Displayed only after playback)
“Checking the Recording Date and Other Information” (A p. 54
)
3
PLAYBACK SETTING Menu
“PLAYBACK SETTING Menu (video)” (A p. 138)
“PLAYBACK SETTING Menu (still image)” (A p. 140)
4
SETUP Menu
“SETUP (video/still image)” (A p. 142)
5
CONNECTION SETTINGS Menu
“CONNECTION SETTINGS (video/still image)” (A p. 145)
6
EDIT Menu
“EDIT Menu (video)” (A p. 139)
“EDIT Menu (still image)” (A p. 141)
7
Close Button
Exit the menu.
Getting Started
16
Clock Setting
The “SET DATE/TIME!” screen appears when you turn on this unit for the
first
time after purchase, when it has not been used for a long time, or when
the clock is not set yet.
Set the clock before recording.
1
Open the LCD monitor.
.
0
The unit turns on.
0
When the LCD monitor is closed, the unit turns off.
2
Tap “OK” when “SET DATE/TIME!” is displayed.
.
3
Set the date and time.
.
0
When the year, month, day, hour, or minute item is tapped, “3” and
2” will be displayed.
0
Tap 3 or 2 to adjust the year, month, day, hour, and minute.
4
After setting the date and time, tap “SAVE”.
5
Select the region where you live and tap “SAVE”.
.
0
Time difference between the selected city and the GMT (Greenwich
Mean Time) is displayed.
0
Tap 0 or 1 to select the city name.
Memo :
0
The clock can be reset again later.
“Resetting the Clock” (A p. 17)
0
When using this unit overseas, you can set it to the local time for recording.
“Setting the Clock to Local Time when Traveling” (A p. 20)
0
The clock is reset about one month after the battery is depleted. “SET
DATE/TIME!” is displayed the next time you turn on this unit. Set the clock
again after charging the battery.
Resetting the Clock
Set the clock with “DATE & TIME” from the menu.
1
Tap “MENU”.
.
2
Tap “SETUP”.
.
3
Tap “DATE & TIME”.
.
0
Tap 3 or 2 to scroll the screen.
4
Tap “CLOCK SETTING”.
.
5
Set the date and time.
.
0
When the year, month, day, hour, or minute item is tapped, “3” and
2” will be displayed.
0
Tap 3 or 2 to adjust the year, month, day, hour, and minute.
6
After setting the date and time, tap “SAVE”.
Getting Started
17
7
Select the region where you live and tap “SAVE”.
.
0
Time difference between the selected city and the GMT (Greenwich
Mean Time) is displayed.
0
Tap 0 or 1 to select the city name.
Changing the Display Language
The language on the display can be changed.
1
Tap “MENU”.
.
2
Tap “SETUP”.
.
3
Tap “LANGUAGE”.
.
0
Tap 3 or 2 to scroll the screen.
4
Tap to the desired language.
.
0
Tap 3 or 2 to scroll the screen.
Getting Started
18
Holding this Unit
When holding this unit, keep your elbows close to your sides to prevent
camera shake.
.
0
Hold
the LCD monitor with your left hand and adjust the angle accordingly.
Holding the LCD monitor with your left hand helps to stabilize the camera
for recording.
Caution :
0
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is used by children.
Memo :
0
If camera shake is excessive, use the image stabilizer.
“Reducing Camera Shake” (A p. 43
)
Tripod Mounting
This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the fixed position.
.
0
To
prevent this unit from falling off, check the tripod mounting screw holes
and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.
Caution :
0
To prevent injuries or damages which may result if this unit falls off, read
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
Memo :
0
It is recommended to use a tripod or monopod when recording in
conditions
prone to camera shake (such as in dark places or when zoomed
to the telephoto end).
0
Set the image stabilizer to b (OFF) when using a tripod for recording.
Getting Started
19
Using this Unit Overseas
The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
“Charging the Battery Pack Overseas” (A p. 20)
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “DATE & TIME”.
“Setting the Clock to Local Time when Traveling” (A p. 20)
When
“ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set
1 hour ahead.
“Setting Daylight Saving Time” (A p. 21)
Charging the Battery Pack Overseas
The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
.
Setting the Clock to Local Time when Traveling
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “DATE & TIME”.
Restore the region settings after you returned from the trip.
1
Tap “MENU”.
.
2
Tap “SETUP”.
.
3
Tap “DATE & TIME”.
.
0
Tap 3 or 2 to scroll the screen.
4
Tap “AREA SETTING”.
.
5
Select the area you are traveling to and tap “SAVE”.
.
0
Time difference between the selected city and the GMT (Greenwich
Mean Time) is displayed.
0
Tap 0 or 1 to select the city name.
Memo :
0
Setting
“AREA SETTING” changes the clock time such that time difference
is accounted for.
After returning to your country, re-select the region that was set initially to
restore the original clock settings.
Getting Started
20
1 / 1

JVC GZ-RX510 Kasutusjuhend

Tüüp
Kasutusjuhend
See käsiraamat sobib ka

teistes keeltes