Huawei hg8145v5 paigaldusjuhend

Tüüp
paigaldusjuhend

See juhend sobib ka

DEVICE INSTALLATION
1
Tap on the Device Installation icon on the Control Hub screen in your
TIME Internet app.
Tap on the + symbol to add a new device(s).
HOW TO INSTALL NEW HUAWEI MESH DEVICES
VIA THE TIME INTERNET APP
Tap on Start Installation to begin the process.
Ensure your device(s) is placed 2m from your router in order for it to be detected.
Should you encounter any errors, simply follow the instructions on screen.
The indicator light on your device(s) will start to blink once the installation process begins.
Tap on Next to proceed.
The app will start connecting your device(s). It will take approximately 4 minutes or less
to complete the installation.
4
Once the process is complete, your device(s) will be ready for use. Tap on Done to finish.
If you wish to delete your installed device(s), simply swipe left on the selected device and
tap on Delete.
5
If you would like to stop the installation, simply tap on Stop Installation.
If the installation is interrupted midway, tap on Yes to restart the process.
6
If the app fails to detect your device(s), ensure that it is powered on and placed within
2m of your router. Tap on Retry to start again.
If the app fails to detect your device(s) after two (2) attempts, reset your device following
the steps below:
a. Power off your device by unplugging it from the power socket.
b. Using a needle or a thin piece of metal or plastic, hold the reset button for a
few seconds.
c. Release the button once the indicator light goes off.
d. Tap on Next to proceed.
Plug your device back in to turn it on and tap on Next. This will take you back to the start
of the installation process where you can try again.
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Huawei hg8145v5 paigaldusjuhend

Tüüp
paigaldusjuhend
See juhend sobib ka

teistes keeltes