SENZ ARIA DAB+ BT RADIO Omaniku manuaal

Instruction Manual

DAB+/FM Radio with Bluetooth

SARIA

VO L+

ME MORY SEL EC T INF O/ MEN U SO URC E

SC AN/PAIR/

PR ESET TU NING

N

A

T

E

VI

GA

SARIA

Thank you for purchasing this SENZ ARIA DAB+/FM radio.

Please read the instructions and warnings carefully before use, to ensure safe

and satisfactory operation of this product.

English

SAFETY PRECAUTIONS

• Read all the instructions carefully before using the unit and keep them for future

reference.

• Check that the voltage marked on the rating label matches your mains voltage.

• The unit must be placed on a ﬂat stable surface and should not be subjected to

vibrations.

• Do not place the unit on sloped or unstable surfaces as the unit may fall oﬀ or

tip over.

• The mains socket must be located near the unit and should be easily accessible.

• Avoid extreme degrees of temperature, either hot or cold. Place the unit well

away from heat sources such as radiators or gas/electric ﬁres.

• Avoid exposure to direct sunlight and other sources of heat.

• Never place any type of candle or naked ﬂame on the top of or near the unit.

• To reduce the risk of ﬁre, electric shock or product damage, do not expose this

unit to rain, moisture, dripping or splashing. No objects ﬁlled with liquids, such

as vases, should be placed on the unit.

• If you spill any liquid into the unit, it can cause serious damage. Switch it oﬀ at

the mains immediately. Withdraw the mains plug and consult your dealer.

• To prevent the risk of electric shock or ﬁre hazard due to overheating, ensure

that curtains and other materials do not obstruct the ventilation vents.

Safety

• Always disconnect the unit from the mains supply before connecting/

disconnecting other devices or moving the unit.

• Unplug the unit from the mains socket during a lightning storm.

• This unit will become warm when used for a long period of time.

• This is normal and does not indicate a problem with the unit.

2

Mains Adapter

• Make sure the unit is not resting on top of the mains adapter cable, as the

weight of the unit may damage the cable and create a safety hazard.

• If the mains adapter is damaged it must be replaced by the manufacturer, its

service agent, or similarly qualiﬁed persons in order to avoid a hazard.

Interference

Do not place the unit on or near appliances which may cause electromagnetic

interference. If you do, it may adversely aﬀect the operating performance of the

unit, and cause a distorted sound.

Supervision

Children should be supervised to ensure that they do not play with the unit.

Never let anyone especially children push anything into the holes, slots or any

other openings in the case - this could result in a fatal electric shock.

Service/Maintenance

• To reduce the risk of electric shock, do not remove screws. The unit does not

contain any user serviceable parts. leave all maintenance work to qualiﬁed person.

• Do not open any ﬁxed covers as this may expose dangerous voltages.

• Ensure to unplug the unit from the mains socket before cleaning.

• Do not use any type of abrasive pad or abrasive cleaning solutions as these may

damage the unit's surface.

• Do not use liquids to clean the unit.

Earphones

• Listening to loud sounds for prolonged periods of time may permanently

damage your hearing.

• Before putting on earphones, turn the volume down then put the earphones on

and slowly increase the volume until you reach a comfortable listening level.

Package Contents

DAB+ /FM Radio

Power supply adapter

Instruction manual

3

English

Product Overview

VO L+

ME MORY SE LEC T INFO /ME NU SOU RCE

SC AN/PA IR/

PR ESET T UNI NG

N

A

V

T

E

I

GA

1

7

6543

10

11

2

8 9

12

13 14 15

Front Panel

Real Panel

1. LCD Display

2. Volume control/ Power on/oﬀ

3. MEMORY button

4. SELECT button

5. INFO/MENU button

6. SCAN/PAIR/ button

7. SOURCE button

8. PRESET +

9. PRESET –

10. TUNING backward

11. TUNING forward

12. Antenna

13. DC Input

14. AUX IN

15. Headphone Socket

4

Using your DAB+/FM radio/ Bluetooth/AUX-IN

1. Turn on the unit

Press the rotary button to turn on or turn oﬀ.

2. Switch between Bluetooth, AUX-IN, DAB+ and FM mode

Press Source button repeatedly to select between Bluetooth, AUX-IN, DAB+ or

FM mode.

3. Basic Operation

3.1 DAB+ radio mode

DAB+ radio mode receives DAB+ digital radio and displays information about the

station and programme/track as broadcast.

3.1.1 Reset and scan DAB+ station

When this is the ﬁrst time you use, or if the station list is empty, the radio

automatically performs a full scan to see what stations are available. You may also

need to start a scan manually to update the list of stations for one of the

following reasons:

• New stations may become available from time to time.

• Stations close or can no longer be received (In the station list, invalid stations

are indicated with a question mark in front of their name).

• If reception was not good for the original scan (for example the antenna was

not up), this may result in an empty or incomplete list of available stations.

• If you have poor reception of some stations causing the audio to break up, you

may wish to list only stations with good signal strength.

To do a full scan manually

In DAB+ mode, press and hold “menu/info” button until the screen showing

<Full Scan> and then Select, or press “Scan/Pair” Button, it will turn to full scan.

Once a scan is complete, the radio returns to playing the previously-selected

station or the ﬁrst station the station list.

3.1.2 Select stations

In DAB+ mode, press “Tune-” or “Tune+” to select through the list of stations.

Stop at your preferred station, then press “Select” It will be tuned automatically

within a second.

Note: During the search, operation of the sound level will be muted automatically.

3.1.3 Adjust volume

Turn the “rotary” button clockwise or anti-clockwise to increase or decrease

volume respectively.

5

English

3.1.4 MEMORY:

The Memory settings allow you to select the DAB+ radio with a variety of your

favorite stations suitable for you. Choose a station and press and hold “Memory”

button for 2 seconds to adjust the NO. By “rotable Knob” or “tuning” Keys, and

then Press “Select” .

3.2 FM radio mode

FM radio mode receives analogue radio from the FM band and displays RDS (Radio

Data System) information about the station and show (where broadcast).

While FM radio is playing, the screen shows its frequency, or if RDS information is

available, station name and any further 'RadioText' information is shown.

If no information is available, just the frequency and a<No RadioText> message

is shown.

3.2.1 Scan FM station

In FM mode, you can also tune the station manually. Press the “tune-” or “tune+”

button to adjust the FM frequencies with 50 kHz down or up respectively.

If press and hold the “tune-” or “tune+” button, it will scan to previous or next

station. (for details see Scan settings in section 4.2.1 Settings).

3.2.2 Adjust volume

Turn the “rotary” button clockwise or anti-clockwise to increase or decrease

volume respectively.

3.2.3 MEMORY:

The Memory settings allow you to select the FM radio with a variety of your

favorite stations suitable for you. Choose a station and press and hold “Memory”

button for 2 seconds to adjust the NO. By “rotable Knob” or “tuning” Keys, and

then Press “Select” .

3.3 Bluetooth mode

Press the “power” button to turn on the device and then press “Source” button

to change to Bluetooth mode.Turn on the Bluetooth function on your mobile

device and look for “SENZ ARIA” in the Bluetooth device list.After successfully

connecting, adjust the volume on your audio device to the desired volume level.

3.4 Aux-in Mode

Press the “power” button to turn on the device and then press “Source” button to

change to AUX-IN mode.Use a 3.5mm audio cable (not included) to connect the

speaker to an audio source.You can play music from the audio source.

6

4. Advance settings

The Advance settings allow you to tailor the DAB+/FM radio with a variety of

options to suit you. To access Advance settings from any mode, press and hold

“Menu/Info” button for 2 seconds to enter the menu.

4.1 DAB+ radio mode

Under the advance setting, press “Tune-” or “Tune+” to select through the list of

menu, stop at your preferred option, it will be enter or start the function

automatically within a second. The advance setting menu options are:

• Full scan

• Manual tune

• DRC

• Prune

• TA

• System

4.1.1 Full scan

Under advance setting, press “Tune-” or “Tune+” to ﬁnd Full scan through the list

of menu, then press “ select” to select. Full scan starts automatically after 3

seconds. Once a scan is complete, the radio returns to playing the previously-

selected station or ﬁrst station on the station list.

Note: If no radio station found, it shows No DAB Station. For a better reception,

extend the antenna or do the full scan again in another place.

4.1.2 Manual tune

As well as the normal method of scanning, you can also manually tune to a

particular channel/frequency. This can be useful for adjusting your antenna to

achieve the best possible reception and scanning a particular channel to update

the station list.

Under advance setting, press “Tune-” or “Tune+” to ﬁnd Manual tune through the

list of menu, then press “SELECT” to select. Then press “Tune-” or “Tune+” to

select a particular channel/frequency.

The display shows a live indication of the received signal strength on the selected

frequency. Adjustments to your antenna will be manifested in the received signal

strength displayed.

4.1.3 DRC (Dynamic range compression)

This function reduces the diﬀerence between the loudest and quietest audio

being broadcast. Eﬀectively, this makes quiet sounds comparatively louder, and

loud sounds comparatively quieter.

7

English

Options: oﬀ(default) | low | high

Under advance setting, press “Tune-” or “Tune+” to DRC through the list of menu,

then press “select” to select. Then press “Tune-” or “Tune+” to select particular

setting.

Note: DRC only works if it is enabled by the broadcaster f or a speciﬁc station.

4.1.4 Prune (remove stations that are listed but unavailable)

This removes all invalid stations indicated in the station list with a '?' in front of

the station name.

Under advance setting, press “Tune-” or “Tune+” to ﬁnd Prune through the list of

menu, then press “Select” to select. Then press “Tune-” or “Tune+” to choose

<YES> then press “SELECT” to conﬁrm removing all invalid stations, it will

automatically start the process after 3 seconds.

4.1.5 TA (Traﬃc Alarm)

Under advance setting, press “Tune-” or “Tune+” to TA through the list of menu,

then press “Select” to select. Then press “Tune-” or “Tune+” to choose “on” or “oﬀ”

to open or close this function.

4.1.6 System

The System menu options are:

• Sleep

• Alarm

• Time

• Backlight

• Language

• Factory Reset

• SW version

Note: as you go through the possible values, an asterisk (*) appearing to the

right-hand side of the display indicates the currently selected value for each setting.

4.1.6.1 Sleep

Press and hold INFO/MENU button into Menu <System>, press either Prev. or

Next buttons to or Rotable Knob to cycle through options until you locate “Sleep”

and Press Select button to select.

You can set your radio to turn oﬀ automatically using the sleep timer. You can

choose from Sleep oﬀ, 15, 30, 45，60 and 90 minutes.

8

4.1.6.2 Alarm

1. press and hold MENU button into Menu <System>, press either Prev. or Next

buttons to cycle through options until you locate “Alarm Setting”. Then Press

the Select control inwards to selection. <Alarm1 Setting> or <Alarm2 Setting>

2. Press the Select button into Alarm1 Set, press either Prev. or Next buttons to

selection Alarm1 “On”, Press Select button to conﬁrm.

3. Press Select button into set “hh”, Flash “hh”, Press either Prev. or Next buttons

to selection “hh”, Press Select button to conﬁrm

4. Press Select button into set “mm”, Flash “mm” Press either Prev. or Next

buttons to selection set “mm”, Press Select button to conﬁrm.

Press either Prev. or Next buttons to selection the alarm source. Select between

Buzzer, DAB FM. Press Snooze/Select button to conﬁrm.

Press either Prev. or Next buttons to selection the alarm occurrence. Select

between Once, Daily, Week day or Weekend, then press the SELECT to conﬁrm

ﬁnish Alarm1 set.

Note:<Alarm2 Setting> same as <Alarm1 Setting>

Snooze

When the alarm sounds, Press any key (except Standby, stop Alarms) button to

keep Snoozing another 9 minutes.

Stop Alarms

When the alarm sounds, press the standby button to stop;

4.1.6.3 Time

In the Time menu, you can set the Time and Date.

Set the time by using the “Tune-” or “Tune+” button and conﬁrm by pressing “Select"

Set the date by using the “Tune-” or “Tune+” button and conﬁrm by pressing “Select"

It will be showed Time saved in the display.

In the Time menu, you can select other parameter by using the “Tune-” or

“Tune+” button.

Set the time and date update method: Update from Any / Update from DAB+ /

Update from FM /

No update and then press “select” to conﬁrm

Set the 12 /24 hour: Set 24 hour / Set 12 hour and then press “select” to conﬁrm

Set date format: DD/MM/YYYY/MM/DD/YYYY and then press “select” to conﬁrm

9

English

4.1.6.4 Backlight

Follow the below instructions to select the backlight menu. The sections after

explain each setting.

1. Press and hold the Menu button

2. When the 'Full Scan(DAB)or ' Scan Setting(FM) option appears press either

Prev. or Next buttons to cycle through the menu options until you locate

'system'. Press the Select button to select

3. Use the Prev. or Next buttons to locate the Backlight option and press the

Select button.

Timeout:

Following backlight setting1-3steps

4. Use the Prev. or Next buttons to locate the Timeout option and press the

Select button

5. Use the Prev, or Next buttons to cycle through options 10-180 seconds

6. Press the Select button to store the setting

On level

Following backlight setting 1-3steps

4. Use the Prev. or Next buttons to locate the On level option and press the

Select button

5. Use the Prev. or Next buttons to cycle through Low or High

6. Press the Select button to store the setting

7. The Low or High backlight brightness level will be eﬀective immediately and

restore the default backlight level according to the selected Timeout option.

Dim level

Following backlight setting1-3steps

4. Use the Prev. or Next buttons to locate the 'Dim level option and press the

Select button.

5. Use the Prev. or Next buttons to cycle through Low or High

6. Press the Select button to store the setting.

7. The Low or High backlight brightness level will be eﬀective according to the

selected Timeout option.

10

4.1.6.5 Language

The language used for display messages can be selected from below options:

Cycle through Language menu by pressing “Tune-” or “Tune+” or Rotable knob to

select and stop at a particular language by pressing “Select” .

4.1.6.6 Factory reset

A factory reset clears all user deﬁned settings, replacing them with the original

default values, so time/date, preferences/settings, DAB+ station list and preset

stations are all lost.

If you select <Factory reset>, you are asked to conﬁrm by selecting <YES>.

Under advance setting, press the “Tune-” or “Tune+” button or Rotable knob to

select “Factory reset” through the list of menu, you are asked to conﬁrm by

selecting <YES>.

4.1.6.7 SW version

This displays the current software version.

Cycle through the menu, press “Tune-“ or “Tune+” button or Rotable Knob to ﬁnd

“SW version” through the list of menu, then press “Select” to select.

4.1.7 Info

You can view further information when the unit is working under DAB mode.

Press Info/menu Button repeatedly and you can have options include:

• DLS (Dynamic Label Segment – short text information broadcast with DAB+ audio)

• Signal Strength

• PTY (Programme Type)

• Ensemble

• Frequency

• Signal Quality

• Bitrate codec

• Time

• Date

4.2 FM radio mode

Under the advance setting, press “Tune-” or “Tune+” to select through the list of

menu, stop at your preferred option, it will be enter or start the function

automatically within a second. The advance setting menu options are:

• Scan setting

• Audio setting

• System (please refer to 4.1.6)

11

English

English | Svenska| Dansk | Suomir

4.2.1 Scan setting

By default, FM scans stop at any available station (All stations). This may result in

poor quality audio from weak stations.

Options: All stations | Strong stations only

Press “Tune-” or “Tune+” then press “select” to select a particular option in Scan

setting, .

4.2.2 Audio setting

By default, all stereo stations are reproduced in stereo. For weak stations, this

may result in poor quality audio. The audio quality can be improved using mono.

Options: Stereo allowed | Forced mono

Press “Tune-” or “Tune+” then press “select” to select a particular option in Audio

setting.

4.2.3 System

Please refer to 4.1.6

4.2.4 Info

You can view further information when the unit is working under FM mode.

Press Info/menu Button repeatedly and you can have options include:

• Radio Text

• PTY (Programme Type)

• PS (Programme Service)

• Stereo & Mono

• Time

• Date

4.3 Bluetooth mode:

Under the advance setting, press “Tune-” or “Tune+” to select through the list of

menu, stop at your preferred option. The advance setting menu options are:

• System (please refer to 4.1.6)

• Bluetooth Pair Name: SENZ ARIA

4.4 Aux-in mode:

Under the advance setting, press “Tune-” or “Tune+” to select through the list of

menu, stop at your preferred option. The advance setting menu options are:

• System (please refer to 4.1.6)

12

Problem

No sound

Buttons a not working

Station not found

FM: Hiss

DAB+: burbling/intermittent cut-out

DAB+: 'No stations available' message

Solution

- The station is not tuned in. Fine tune the station.

- The volume is set to a low position. Increase the volume.

- Headphones may be connected. Disconnect the

headphones

Turn o the unit and turn on again after a few seconds.

Weak signal. Use the manual tune function.

-Signal reception is too low. Adjust the aerial or move the unit

to a stronger signal location.

-Rescan stations.

As above then rescan stations.

Specications

Description

Speaker:

Frequency Ranges:

LCD Display:

Portable DAB+/FM Radio

5W

FM: 87.5 -108MHz; DAB+: 174 - 240MHz

High resolution display

English

Input voltage AC100~240V

Manufacturer

Address

Type

ShenZhen A-WIN Technology Co.,Ltd.

Baoan

AW006WR-0650075VH

Max. Transmission Power (Bluetooth):

Bluetooth Transmission Frequency Range:

2402MHz-2480MHz

2dbm

Power Supply:

Input AC frequency

Output current

50/60Hz

DC6.5V

750mA

4Floor,3nd Building Gaokeshidai Industrial Area,Shiyan

Eciency at low load(10%)

Average active eciency

No-load power consumption

Output voltage

Output power

4.875W

77.24% @ 115AC/60Hz

77.67% @ 230VAC/50Hz

@ 115AC/60Hz

@ 230V/50Hz

0.053W @ 115VAC/60Hz

0.071W @ 230VAC/50Hz

13

Guang dong, CHINA. Shen zhen,

Dimension: 13.2 x 11.6 x 22.5 cm

5.Trouble shooting

Instruktionsmanual

DAB +/FM-radio med Bluetooth

SARIA



Tack för att du köpte denna SENZ ARIA DAB +/FM-radio.

Läs noggrant igenom instruktionerna och varningarna för att säkerställa en

säker och tillfredsställande drift av denna produkt.

Svenska

SÄKERHETSÅTGÄRDER

• Läs noga igenom alla instruktioner innan du använder enheten och behåll dem

för framtida referens.

• Kontrollera att spänningen märkt på enheten och matchar ditt elnäts Spänning.

• Enheten måste placeras på en platt, stabil yta och bör inte utsättas för vibrationer.

• Placera inte enheten på snedställda eller instabila ytor eftersom enheten kan

falla aveller tippa över.

• Stickkontakten måste vara placerad i närheten av enheten och ska vara l

ättillgänglig.

• Undvik extrema temperatur, varma och kalla.

• Placera enhet väl borta från värmekällor som radiatorer eller gas/elektriska

bränder.

• Undvik exponering av direkt solljus och andra värmekällor.

• Placera aldrig någon typ av stearinljus eller öppen eld på toppen av eller nära

enheten.

• För att minska risken för brand, elektriska stötar eller produktskador utsätt inte

denna enhet för regn, fukt, eller stänk.

• Inga föremål fyllda med vätskor, som vaser, bör placeras på enheten.

• Om du spiller någon vätska på enheten kan det orsaka allvarliga skador.

Stäng av via vid strömnätet omedelbart. Dra ut stickkontakten och kontakta din

återförsäljare.

• För att förhindra risk för elektriska stötar eller brandfara på grund av

överhettning, se till att gardiner och andra material inte hindrar

ventilationsventilerna.

Säkerhet

• Koppla alltid av enheten från nätspänningen innan du kopplar till/från andra

enheter eller ﬂyttar enheten.

• Koppla ur enheten från vägguttaget under åskväder.

• Denna enhet blir varm när den används under en lång tid.

• Detta är normalt och indikerar inte ett problem med enheten.

16

Nätadapter

• Kontrollera att enheten inte vilar ovanpå nätadapterkabeln, eftersom enhetens

vikt kan skada kabeln och skapa en säkerhetsrisk.

• Om nätadaptern är skadad måste den bytas ut av tillverkare, serviceagent eller

liknande kvaliﬁcerade personer i för att undvika fara.

Interferens

Placera inte enheten på eller nära apparater som kan orsaka elektromagnetisk

störning. Om du gör det kan det ha en negativ eﬀekt på driftens prestanda och

orsaka ett förvrängt ljud.

Övervakning

Barn bör övervakas för att säkerställa att de inte leker med enheten.

Låt aldrig någon speciellt barn trycka in någonting i hålen eller andra

öppningar - detta kan leda till en dödlig elektrisk chock.

Service underhåll

• För att minska risken för elektriska stötar, avlägsna inte skruvarna.

Enheten innehåller inga delar som kan modiﬁeras av användaren. lämna allt

underhållsarbete till en kvaliﬁcerad person.

• Öppna inga enheten eftersom detta kan utsätta användarens för farliga

spänningar.

• Se till att du kopplar ur enheten från vägguttaget innan du rengör den.

• Använd inte någon form av slipmedel på eftersom dessa kan skada enhetens yta.

• Använd inte vätskor för att rengöra enheten.

Hörlurar

• Att lyssna på högljudda ljud under långa perioder kan permanent skada din hörsel.

• Innan du sätter på hörlurar ska du sätta på volymen och sedan sätta på

hörlurarna och sakta öka volymen tills du når en behaglig lyssningsnivå.

Paketets innehåll

DAB +/FM-radio

Strömförsörjningsadapter

Instruktionsmanual

17

Svenska

Produktöversikt

VO L+

ME MORY SE LEC T INFO /ME NU SOU RCE

SC AN/PA IR/

PR ESET T UNI NG

N

A

V

T

E

I

GA

1

7

6543

10

11

2

8 9

12

13 14 15

Frontpanel

Bakpanel

1. LCD-skärm

2. Volymkontroll/Slå på/av

3. MEMORY-knapp

4. VÄLJ-knapp

5. INFO/MENU-knapp

6. SCAN/PAIR/ -knapp

7. SOURCE-knapp

8. PRESET +

9. PRESET –BLÄDDRA BAKÅT-knapp

10. BLÄDDRA FRAMMÅT-knapp

11. TUNING i framtiden

12. Antenn

13. Ström-ingång

14. AUX-ingång

15. Hörlursuttag

18

Hur du använder din DAB +/FM-radio/Bluetooth/AUX-radio

1. Slå på enheten

Tryck på vridknappen för att slå på eller stänga av.

2. Växla mellan Bluetooth, AUX-IN, DAB + och FM-läge

Tryck på Source-knappen ﬂera gånger för att välja mellan Bluetooth, AUX-IN,

DAB + eller FM-läge.

3. Grundläggande användning

3.1 DAB+ radio-läge

DAB + radioläge tar emot DAB + digitalradio och visar information om stationen

och programmet / spåret som sändning.

3.1.1 Återställ och skanna DAB + stationer

• Nya stationer kan bli tillgängliga då och då.

• Stationer stängs av eller kan inte längre tas emot (I stationslistan indikeras

ogiltiga stationer med ett frågetecken framför namnet).

• Om mottagningen inte blev bra under den ursprungliga skanningen (till exempel

om antennen inte var uppe), kan det leda till en tom eller ofullständig lista över

tillgängliga stationer.

• Om du har dålig mottagning för vissa stationer som leder till att ljudet bryts,

kan du välja att bara lista stationer med god signalstyrka.

Att göra en fullständig genomsökning manuellt

I DAB + -läget, tryck och håll "meny/info"-knappen intryckt tills skärmen som visar

<Full Scan> och välj, eller tryck på "Scan/Pair"-knappen, då kommer den att utföra

en fullständig genomsökning. När skanningen är klar återgår radion till att spela

den tidigare valda stationen eller den första stationen i stationslistan.

3.1.2 Välj stationer

I DAB + -läget, tryck på "Tune-" eller "Tune +" för att välja genom listan över

stationer. Stanna vid den önskade stationen och tryck sedan på "Välj".

Den bläddrar automatiskt inom en sekund.

Obs! Under sökningen dämpas ljudnivån automatiskt

3.1.3 Justera volymen

Vrid "roterande"-knappen medurs eller moturs för att öka respektive minska

volymen.

19

Svenska

3.1.4MEMORY:

Med Memory-inställningarna kan du välja DAB+-radio med en mängd olika

favoritstationer som passar dig. Välj en station och tryck och håll ner "Memory"

knappen i 2 sekunder för att justera NO. Med den "roterbara”-knappen eller "

inställning", och tryck sedan på "Välj" .

3.2 FM radioläge

FM-radio läget tar emot analog radio från FM-bandet och visar RDS (Radio Data

System) information om stationen och radioprogrammet (under sändning).

Medan FM-radio spelas visar skärmen sin frekvens, eller om RDS-information är

tillgänglig, visas stationsnamn och ytterligare information om "RadioText".

Om ingen information ﬁnns tillgänglig visas bara frekvensen och ett meddelande

<No RadioText>.

3.2.1 Skanna FM-stationen

I FM-läge kan du också ställa in stationer manuellt. Tryck på "tune -" eller "tune +"

-knappenför att justera FM-frekvenserna med 50 kHz respektive nedåt.

Om du trycker på och håller knappen "Tune -" eller "Tune +", skannar den till

föregående eller nästa station.

(för detaljer, se Skanningsinställningar i avsnitt 4.2.1 Inställningar).

3.2.2 Justera volymen

Vrid den "roterande"-knappen medurs eller moturs för att öka respektive minska

volymen.

3.2.3 MEMORY:

Med minnesinställningarna kan du välja FM-radio med en mängd olika

favoritstationer som passar dig. Välj en station och tryck och håll ner

"Memory"-knappen i 2 sekunder för att justera NO. Med knapparna "roterbar

knapp" eller "inställning", och tryck sedan på "Välj" .

3.3 Bluetooth-läge

Med bluetooth-läge kan du ansluta till enheten via Bluetooth. Tryck på

"power"-knappen för att slå på enheten och tryck sedan på "Source"-knappen för

att byta till Bluetooth-läge. Försök att ansluta och koppla Bluetooth mellan

produkterna och din musikuppsamlingsenhet.

Bluetooth-parnamn för produkterna:SENZ ARIA

3.4 Aux-läge

Aux-läget tillåter dig att ansluta till enheten via AUX-kabel. Tryck på

"power"-knappen för att slå på enheten och tryck sedan på "Source"-knappen för

att byta till AUX-läget.

20

Leht laadib ...

SENZ ARIA DAB+ BT RADIO Omaniku manuaal

SENZ ARIA DAB+ BT RADIO Omaniku manuaal

teistes keeltes

Seotud paberid

Muud dokumendid