2. Press “ON” button to turn the display on. It will automatically reset to “0.0”.

3. Apply firmly the nozzle of the gauge onto the tyre valve (after removing the dust cap) and hold until the

reading is stable.

4. The readout will last for approximately 90 seconds, then the display will automatically turn off.

5. To turn off manually press and hold “ON” button for 3 seconds.

6. This gauge can measure tyre pressure in 3 different modes: PSI, BAR, KPa, which can be selected by

pressing “ON” button repeatedly.

7. To turn on the LED or torch, slide the switch to appropriate position.

Operating temperature: 0°C-50°C / 32°F-122°F

We do not take responsibility for any damage caused by misuse.

Contact your local importer of your specialized dealer to obtain address of our service department.

You find our partners under www.KRAFTWERKtools.com