meitav-tec PYRO_STAG - zone staggering controller toote info

Bränd
meitav-tec
Mudel
PYRO_STAG - zone staggering controller
Tüüp
toote info
N L V1 X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8 1 2 3 7 8 AO1 0 AO2
DI1 T1 0 T2 0 T3 0 AI1 0 AI2 5VDC A B
ON
12345678
ON
1234
Date:
Title:
1
Drawn: Danny
Checked: A.Star
Approved:U.Ulanovsky
CTU/DeIcer/SEQ/01
File: CTU_DeIcer_seq_01.vsd
24 VAC
Fuse 8A
LED Power
Sequence
ON
Communication cable
2x22AWG
Twisted, Shielded
Communication cable
2x22AWG
Twisted, Shielded
DI1 0 DI3 0DI2 DI5 0DI4 DI7 0DI6 DI8 12V
S1 Configuration S2 Configuration
DIP Switch S2 - Configuration
S2.1 – On/Off switch
Off - Device disable
On - Device active
S2.2 - Not in use
S2.3 - Not in use
S2.4 - Not in use
*The drawing shows the default configuration.
ON
1234
Digital output 1
Digital input 1 – De-Icer input signal (N.O.)
Digital input 3
Digital input 4
Digital input 5
Digital input 6
Digital input 7
Digital input 8
Digital output 2
Digital output 3
Digital output 4
Digital output 5
Digital output 8
Digital output 7
Digital output 6
Not in use
Digital input 2
Important !
1. Disconnect power to the main board before making any
changes to DIP switches/Jumpers and while wiring the
unit.
2. Never connect 2 outputs with the same number (for
example: do not connect DO1 and DO5)
3. when device is Disable, all outputs work as if there is a
direct connection from the power-box to the heaters.
24VAC, 0.8A each
Not in use
DIP Switch S1 – Timing
S1.1 - # of outputs work in staggering
On - 2 outputs
Off - 4 outputs
S1.2 - Outputs linkage
On – no linkage, 1,2,3,4 outputs works
seperately
Off – outputs 1 & 3 and 2 &4 are linked
S1.3 + S1.4 + S1.5 – Sequence step timer
Off Off Off - 60 seconds
Off Off On - 5 minutes
Off On Off - 10 minutes
Off On On - 20 minutes
On Off Off - 30 minutes
On Off On - 45 minutes
On On Off - 60 minutes
On On On - 120 minutes
S1.6 – 30 seconds delay between outputs On/
Off activation
On - with delay
Off - no delay
S1.7 + S1.8 – Off Delay # of cycles
Off Off - no delay cycles
Off On - 1 delay cycle
On Off - 2 delay cycles
On On - 3 delay cycles
ON
87654321
BACNET protocol
meitav-tec
Tel: +972-3-9626462
Fax: +972-3-9626620
e-mail: support@meitavtec.com
Not in use
N
N
NN
14.10.2012
Print name: PS2600-ASU
Software name:12410701
Check sum : AA5E
Original 14.10.2012
OPTIONAL
12341234
Outputs always
work
Outputs work
in sequence
Not in use
Must remain open
Common -
Feeding Voltage to outputs
CONTACTORS CONTROL
  • Page 1 1

meitav-tec PYRO_STAG - zone staggering controller toote info

Bränd
meitav-tec
Mudel
PYRO_STAG - zone staggering controller
Tüüp
toote info
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid