MILL GLASS 850W PANELOVN Kasutusjuhend

Assembly and instruction manual

Invisible & Glass

panel heaters

Thanks for buying Mill

Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution

of oil ﬁlled radiators and other types of heaters. From 1992 to 2009, we had gained

signiﬁcant knowledge and expertise of diﬀerent type of heaters, thus enabling us to

sell to many of the largest retailers in the Nordic countries.

In 2010, Cato’s son, Philip joined the company. Philip looked at the heating industry

with fresh new eyes and wondered why there had been so little change with the

appearance of portable heaters in the last 20 years, especially since interior design in

general had changed dramatically over the years. Philip thought consumers should

have more styles to choose from other than the typical old-fashioned, traditional

heaters.

Since heaters are part of so many homes, Philip and Cato decided to use their

extensive knowledge to re-invent the design of heaters. They wanted to create

beautiful, modern and minimalistic heaters, using the most advanced technology, that

would complement people’s homes. They launched the brand “Mill” in 2012.

Mill oﬀers revolutionary, innovative Norwegian designs. We are continuously innovating

to complement our line of products to meet consumers’ demand.

Prospering on our success in the Nordics we decided to promote Mill at some of the

world’s largest electronic fairs and home shows, and the feedback from

retailers and distributors all over the world were amazing. We are proud to say that

consumers in over 25 countries can now keep warm with style!

@millheat

millheat.com

Content

Important safety information

Speciﬁcations

Before ﬁrst use

First use

Minimum distances

Description of heater

Assembly

Temperature calibration

Resetting the heater

Memory function

“Open window” function

Instructions electronic thermostat

Power indicator for electronic thermostat

Set desired temperature for electronic thermostat

Instructions day/night thermostat

Power indicator day/night thermostat

Set desired temperature for day/night thermostat

Day- and nighttime setback

How to activate daytime setback

How to activate nighttime setback

Change setback temperature – daytime

Change setback temperature – nighttime

Change number of hours – daytime

Change number of hours – nighttime

Cancel (skip) setback period

Delete setback program

Maintenance

Warranty

Waste disposal

|

• The product is intended for home use only.

• Make sure the heater is connected to the house's regular mains

as indicated on the heater.

• New heaters will produce a speciﬁc odor when used the ﬁrst time.

This will stop aer a short time and is completely harmless.

• Check for any pieces of packing foam or cardboard that may

have fallen into the heating elements of the heater. These pieces

must be removed to avoid unpleasant odors.

• Prevent the heater from overheating – do not cover.

• Always turn oﬀ the heater and unplug it when not used for a long

period of time.

• Pay special attention if the heater is used in rooms where

children, the handicapped or elderly reside.

• The heater should not be set up directly beneath an electrical

socket outlet.

• The cord must not be laid under any kind of carpet. Make sure the

cord is laid in such a way that nobody can trip on it.

• The heater must not be used if either the cord or plug is

damaged. The heater must not be used if it has been dropped

on the ﬂoor or is damaged in any other way causing it to

malfunction.

• The cord must be repaired by the manufacturer or by an expert if

it has been damaged, to avoid dangerous situations.

• Avoid using extension cords, which may overheat and could

possibly start a ﬁre.

• Never cover the air vents on the heater. Avoid potential ﬁre

hazards by making sure the air intakes are not blocked or

covered. The heater should be used in rooms with normal ﬂat

ﬂoors.

Important safety information

WARNING! To avoid electric shock or damage due to

the heat, always make sure the plug is pulled out before

the heater is moved or cleaned.

millheat.com

EN

• The heater should not be installed in close proximity to

ﬂammable materials of any kind because there can always

be a risk of ﬁre.

• The heater must never be used in rooms where gasoline, paint

or other ﬂammable liquids are stored, such as in a garage.

• Never touch an electric heater with wet hands. The heater

should be installed so a person showering or taking a bath

cannot come into direct contact with it.

• Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children and

vulnerable people are present.

• The heater must be switched oﬀ, the plug removed and the

heater must cool down before it is moved.

• Avoid overloading the mains (the circuit) where the heater is

connected. The heater may overload the electrical circuit if

other electrical devices are plugged into the same socket outlet.

• Do not use this heater in small rooms when they are occupied

by persons not capable to leaving the room on their own, unless

constant supervision is provided.

• The product cannot be used by children under 8 years of age

and persons with reduced physical or mental abilities or lack

of experience and knowledge unless they have been given

supervision or instruction in the safe use of the product and

understand the hazards involved.

• Children should not play with the product. Cleaning and

maintenance should not be done by unsupervised children.

• Children under the age of 3 should be kept away from the

product, unless they are under constant supervision.

• Children aged 3 to 8 years are only permitted to turn the

product ON/OFF, assuming the heater is mounted according

to the assembly instructions and the children have received

instruction or supervision in the safe use of the product and

understand the hazards involved.

• Do not use this heater in the immediate surroundings of a bath,

a shower or a swimming pool.

WARNING! The heater must not be used if the glass panels

are damaged (this applies to the products with model names

starting with MB).

Aer turning on the heater for the ﬁrst time or aer an extended period without use,

the heater can produce a burnt odor for a short time. This is normal.

Please read all the instructions carefully before use. Save the instruction manual for future

use.

It is also normal for the heater to make “sounds” when it warms up or cools down.

Model Thermostat Color Height Width Amperage

Power

(W) IP

rating

First use

Before ﬁrst use

Speciﬁcations

The heater is approved for use in bathrooms zone 2 (IPX4 approved)

Aer unpacking the heater, check to make sure the product was not damaged during

transport. Contact the retailer or importer if you discover any visible damages to the

product.

Keep the outer packaging to transport the heater in the future. If you want to dispose

the packaging, make sure it is done properly. Keep plastic bags away from children.

Electronic White30,0 cm35,0 cm 250 IPx4

Day/Night White40,0 cm65,0 cm 600 IPx4

Day/Night White40,0 cm85,0 cm 900 IPx4

Day/Night White40,0 cm105,0 cm 1200 IPx4

Day/Night White25,0 cm105,0 cm 800 IPx4

Day/Night White25,0 cm 121,5 cm 1000 IPx4

Electronic White30,0 cm 36,5 cm 250 IPx4

Day/Night White40,0 cm 66,5 cm 600 IPx4

Day/Night White40,0 cm 86,5 cm 900 IPx4

Day/Night White40,0 cm106,5 cm 1200 IPx4

Day/Night White25,0 cm106,5 cm 800 IPx4

IB250

IB600DN

IB900DN

IB1200DN

IB800L DN

IB1000L DN

MB250

MB600DN

MB900DN

MB1200DN

Day/Night White25,0 cm123,0 cm 1000 IPx4

220-240V~, 50-60Hz

700 IPx4

IB700DN 220-240V~, 50-60Hz

Day/Night White40,0 cm65,0 cm

Day/Night White25,0 cm105,0 cm 850 IPx4

IB850L DN 220-240V~, 50-60Hz

IB1000DN Day/Night White40,0 cm85,0 cm 1000 IPx4220-240V~, 50-60Hz

IB1050L DN Day/Night White25,0 cm 121,5 cm 1050 IPx4220-240V~, 50-60Hz

IB1300DN

Day/Night White40,0 cm105,0 cm 1300 IPx4220-240V~, 50-60Hz

MB700DN

Day/Night White40,0 cm 66,5 cm 700 IPx4220-240V~, 50-60Hz

Day/Night White25,0 cm106,5 cm 850 IPx4220-240V~, 50-60Hz

MB1000DN

Day/Night White40,0 cm 86,5 cm 1000 IPx4220-240V~, 50-60Hz

Day/Night White25,0 cm123,0 cm 1050 IPx4220-240V~, 50-60Hz

Day/Night

MB1300DN

White40,0 cm106,5 cm 1300 IPx4220-240V~, 50-60Hz

MB800L DN

MB1000L DN

MB850L DN

MB1050L DN

≥100 mm

≥50 mm≥50 mm

≥100 mm

≥100 mm in front

of heater

Minimum distances

It may occur deviation between the temperature registered by the heater and the

actual temperature in the room. This can be caused by several reasons, however, the

most common is that the heater is placed in a fair distance from where you usually

reside. When you set the temperature to for example 22 degrees, it is only natural that

you expect the same temperature where your sofa is placed for instance. However,

the temperature sensor is placed on the product itself, and therefore a deviation in

temperature may occur. To adjust this, all Mill heaters are equipped with a calibration

function, which enables you to adjust the temperature registered by the heater. N.B!

The room must have achieved a stable temperature before any calibration.

Press 2 times and use + or – to set the actual temperat

Conﬁrm with or wait 15 seconds for automatic conﬁrmation.

ure observed in the room.

Description of heater

2. Wall bracket

3. Temperature sensor

4. Heat emission

5. Thermostat

6. Steel front

2. Wall bracket

3. Temperature sensor

4. Heat emission

5 Thermostat

6. Glass front

Assembly

Drill holes in the wall for holes 1 & 2. Then drill holes in the wall for the topmost holes

(holes 3 & 4 by using 6)

Insert the wall plugs into the drilled holes and attach the bracket with 4 screws

Place the heater on the lower lugs on the bracket, then hang the heater on the

upper lugs (li the heater slightly to align the heater with for the upper lugs). Screw

in the locking screws on the top of the bracket (clockwise)

Temperature calibration

Attention! Horizontal placement only

MILL INVISIBLE

Instructions electronic thermostat

“Open window” function

Please see table on page 4 for which models that have electronic thermostats

1.Display (shows the desired room temperature by default)

2. Power indicator — shows whether the heater is using power or not

3. Control button (+) (increase temperature)

4. Control button (–) (reduce temperature)

5. Function button

The heater has an “open window” function that is activated instantly when it registers

a sudden drop in temperature with more than 2 degrees Celsius in 2 minutes. The

heater will automatically stop heating and FO will be visible in the display of the

heater.

from FO to desired room temperature).

The heater will automatically start heating again aer 10 minutes (the display switch

temperature

BEFORE THE HEATER IS TURNED ON, IT MUST BE ATTACHED TO A WALL. IF

THE HEATER IS NOT INSTALLED CORRECTLY OR IS INSTALLED ASKEW, THIS MAY CAUSE

THE HEATER TO MALFUNCTION OR IN THE WORST CASE, BE DAMAGED.

Resetting the heater

main switch.

Memory function

The heater remembers all the temperature settings and will automatically return to the

desired temperature aer a power cut. Your day- and nighttime setbacks will however

be deleted aer a power cut, and you will need to register the programs again.

ATTENTION! Aer a power cut the thermostat will return to the last registered

Power indicator for electronic thermostat

When the panel heater is using power (i.e. when it is heating), the power indicator is

lit .

Set desired temperature for electronic thermostat

Press the arrow buttons to set the desired temperature.

Instructions day/night thermostat

1.Display (shows the desired room temperature by default)

2.Control light – night function

3.Control light – day function

4. Power indicator – Shows whether the heater is using power or not

5. Control button (+) (Increase temperature)

6.Control button (–) (Reduce temperature)

7.Night function

8.Day function

9. Function button

The thermostat can be used as a regular electronic thermostat (i.e. the heater will

maintain a constant temperature 24 hours a day). Please see the section instructions

electronic thermostat for further information.

temperature.

BEFORE THE HEATER IS TURNED ON, IT MUST BE ATTACHED TO A WALL. IF

THE HEATER IS NOT INSTALLED CORRECTLY OR IS INSTALLED ASKEW, THIS MAY CAUSE

THE HEATER TO MALFUNCTION OR IN THE WORST CASE, BE DAMAGED.

Please see table on page 4 for which models that have day- and night thermostats.

ATTENTION! Aer a power cut the thermostat will return to the last registered

Power indicator for day/night thermostat

When the panel heater is using power (i.e. when it is heating), the power indicator is

lit .

Set desired temperature for day/night thermostat

Press the arrow buttons to set the desired temperature.

Day- and nighttime setback

When programming the heater for either day- or nighttime setback, the setback

period will be active from the time you register the program. Which means; if you

want to start your daytime setback at 7.30 am, you need to register the program at

7.30 am.

You only need to program the heater 1 time for daytime setback and 1 time for

nighttime setback. If you have programmed the heater, the setback programs

will be active on all 7 days (or 7 nights).

Let us say you want to program the heater for both daytime- and nighttime setback

(normally the heater is set to 23 degrees). You want the heater to do the following:

1.Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17

degrees

2.Nighttime setback activated from 10.00 pm to 6.00 am. Desired temperature: 18

degrees

How to activate daytime setback

1.Tuesday 7.30 am you go to the heater and press on the heater’s control panel.

2. “d” will be visible in the display. Use the + and - buttons to set what day it is today when

you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not

programming the heater for the various days. This is simply to tell the heater what

day it is when you are programming the heater.

5.The daytime setback will now be active from 7.30 am to 2:30 pm every day.

Setback temperature is 17 degrees.

* Control light is green when the heater is in an active setback period. The

control light is red when the setback period is inactive but programmed.

Select 2 for Tuesday. Conﬁrm by pressing .

for daytime setback. Conﬁrm by pressing .

3. “C” will ﬂash in the display. Use the + and - buttons to set 17 as the desired temperature

period (meaning it will be active from 7.30 am to 2:30 pm). Conﬁrm by pressing .

4. “H” will ﬂash in the display. Use the + and - buttons to set 7 hours as desired setback

How to activate nighttime setback

1.Tuesday 10.00 pm you go to the heater and press on the heater’s control panel.

2. "d" will be visible in the display. Use the + and - buttons to set what day it is today when

you are programming the heater (1=Monday), 2 = Tuesday etc.). You are not program-

ming the heater for various days. This is simply to tell the heater what day it is when you

are programming the heater. Select 2 for Tuesday. Conﬁrm by pressing .

Advanced mode

If you want to have diﬀerent temperature settings each day, you may use advanced mode. To

activate advanced mode you need to activate day and night setback ﬁrst.

See ﬁgure 18 on seperate illustration sheet.

How to activate advanced mode for daytime setback:

1. Press and hold , then press + one time.

2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for

Monday. Conﬁrm by pressing .

3. “°C” will ﬂash in the display. Use the + and - buttons to set the temperature for daytime setback.

Conﬁrm by pressing .

4. “H” will ﬂash in the display. Use the + and - buttons to set the number of hours as desired setback

period. Conﬁrm by pressing .

5. “SR” will be visible in the display. Now you have the option to set the time of day that you want

the setback time to start. You may choose from -4 hours to +4 from the time your daytime setback

normally starts. Meaning, if your daytime setback normally starts at 10:30, but you want the setback

time to be activated 08:30 every Monday, you may use the - button to set “-2” (hours). Conﬁrm by

pressing

6. “d2” (day 2) which is Tuesday, will now be visible in the display and you may do the same

procedure to set the desired temperature for Tuesday. Keep repeating the same procedure for all 7

days.

How to activate advanced mode for nighttime setback:

1. Press and hold , then press + one time.

2. “d1” (day one) will be visible in the display, and you my now choose the temperature you want for

Monday night. Conﬁrm by pressing .

3. “°C” will ﬂash in the display. Use the + and - buttons to set the temperature for nighttime setback.

Conﬁrm by pressing

5.The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The

setback temperature is 18 degrees.

* Control light is green when the heater is in an active setback period. The control

light is red when the setback period is inactive but programmed.

N.B! If a power cut occurs/you turn oﬀ the heater, the programming will be lost and

you will have to do this over again.

3. “C” will ﬂash in the display. Use the + and - buttons to set 18 as the desired temperature for

nighttime setback. Conﬁrm by pressing .

4. “H” will ﬂash in the display. Use the + and - buttons to set 8 hours as desired setback period

(meaning it will be active from 22.00 pm to 6.00 am). Conﬁrm by pressing .

4. “H” will ﬂash in the display. Use the plus and minus buttons to set the number of hours as

desired setback period. Conﬁrm by pressing .

5. “SR” will be visible in the display. Now you have the option to set the time of night that you

want the setback time to start. You may choose from -4 hours to +4 hours from the time

your nighttime setback normally starts. Meaning, if your nighttime setback normally starts at

22:00, but you want the setback time to be activated 21:00 every Monday, you may use the -

button to set “-1” (hour). Conﬁrm by pressing .

6. “d2” (day 2) will now be visible in the display and you may do the same procedure to set

the desired temperature for Tuesday. Keep repeating the same procedure for all 7 days.

Change setback temperature – daytime

Press and hold and press 3 times.

Enter the desired temperature for daytime setback. Save by pressing or wait for 15

Change setback temperature – nighttime

Press and hold and press 3 times.

Enter the desired temperature for nighttime setback. Save by pressing or wait for

Change number of hours – daytime

Press and hold and press 2 times.

Enter the desired number of hours for daytime setback. Save by pressing or wait

Change number of hours – nighttime

Press and hold and press 2 times.

Enter the desired number of hours for nighttime setback. Save by pressing or wait

Cancel (skip) setback period

Press and hold and press or once (depending on which setback period

you want to cancel).

Delete a setback program

Press and hold or (depending on which setback period you want to cancel)

for 3 seconds.

seconds for automatic conﬁrmation.

15 seconds for automatic conﬁrmation.

for 15 seconds for automatic conﬁrmation.

Grini Næringspark 10

1361 Østerås

Norway

Maintenance

Warranty

Waste disposal

1. For cleaning, always unplug the heater and leave it to cool.

2. Wipe the heater regularly with a damp cloth and dry the surface before turning on

the heater again.

cause a ﬁre hazard and/or electric shock.

3. The heater must be cleaned at least once a month during the heating season.

5.The heater can be stored in a dry and clean place.

6.If the heater stops working, do not attempt to repair it yourself because it can

The warranty is valid for 2 years. The heater will be repaired or replaced during

this time should any malfunction occur. The warranty applies if the heater is used

according to these instructions and the customer can present a purchase receipt. If

the heater malfunctions in any way, please contact the store where it was purchased

or the importer.

The symbol indicates that this product is not to be disposed of together with

household waste. This product must be delivered to a recycling service or container

for electrical appliances and electronic equipment. This is done to avoid health risks

and prevent harm to the environment. Local businesses (or the environmental station

in your neighborhood) are required by law to accept and recycle such products, as a

means of environmentally sound disposal.

4. Dust etc. should be removed with a so cloth.

Innholdsfortegnelse

Viktig sikkerhetsinformasjon

Spesiﬁkasjoner

Før førstegangsbruk

Førstegangsbruk

Minimumavstander

Beskrivelse av ovnen

Montering

Kalibrering av temperatur

Resette ovnen

Huskefunksjon

Bruksanvisning elektronisk termostat

Strømindikator for elektronisk termostat

“Åpent vindu” funksjon

Sett ønsket temperatur for elektronisk termostat

Bruksanvisning dag/natt termostat

Strømindikator for dag/natt termostat

Sett ønsket temperatur for dag/natt termostat

Dag – og nattsenking

Slik gjør du for å aktivere dagsenk

Slik gjør du for å aktivere nattsenk

Endre senketemperatur – dag

Endre senketemperatur – natt

Endre antaII timer – dag

Endre antaII timer – natt

Kansellere (hoppe over) senkeperiode

Slette senkeprogram

Vedlikehold

Garanti

Avfallshåndtering

|

NO

For å unngå elektrisk støt eller skader på

grunn av varme, pass alltid på at støpselet er trukket ut

før ovnen ﬂyttes eller rengjøres.

Produktet er kun beregnet for hjemmebruk

Sørg for at ovnen kobles til husets vanlige strømnett slik ovnens

merke viser

Nye ovner vil avgi en egen lukt når den brukes første gang. Dette gir

seg etter en kort stund og er helt ufarlig

Sjekk at det ikke har falt rester (isopor/papp) fra innpakningen ned

ubehagelig lukt

Unngå at ovnen blir overopphetet-

over lengre tid

Vær spesielt oppmerksom hvis ovnen er i bruk i rom hvor barn,

handikappede eller eldre oppholder seg

Ovnen må ikke stilles opp rett under et elektrisk kontaktpunkt

Ledningen må ikke legges under tepper av noe slag. Påse at den

ligger på en slik måte at ingen kan snuble i den

Ovnen må ikke brukes hvis ledningen eller kontakten er skadet. Den

må ikke brukes hvis den har falt i bakken (gulvet) eller er skadet på

annen måte, slik at den ikke fungerer normalt

Hvis ledningen blir skadet må denne bli reparert av en fagperson

for å unngå farlige situasjoner

Unngå å bruke skjøteledning, da en slik ledning kan bli

overopphetet og muligens starte en brann

brukes i rom med vanlige rette gulv

Viktig sikkerhetsinformasjon

NO

Ovnen må ikke monteres rett ved brennbart materiale av noe slag

da det alltid kan være en fare for brann

Ovnen må aldri brukes i rom hvor det lagres bensin, maling eller

andre lett antennelige væsker som for eks. i en garasje

Ta aldri på en elektrisk ovn med våte hender. Ovnen monteres/

plasseres slik at en person som dusjer eller tar et bad ikke kan

komme i direkte kontakt med den

Enkelte deler av denne ovnen kan bli veldig varme og forårsake

brennmerker på huden. Vær ekstra oppmerksom når barn og

sårbare personer er tilstede

Ovnen må være skrudd av, kontakten tatt ut og ovnen være

Unngå overbelastning på strømnettet (kursen) hvor ovnen er

tilkoblet. Ta hensyn hvis andre elektriske apparater er koblet til

samme strømuttak eller kurs

Bruk aldri ovnen i små rom hvor personer som ikke er i stand til

å forlate rommet av seg selv oppholder seg, med mindre de er

under konstant tilsyn

Produktet kan ikke benyttes av barn under 8 år og personer med

og kunnskap, om de ikke får tilsyn eller instruksjoner om bruk av

produktet på en sikker måte og forstår farene som er involvert

Barn skal ikke leke med produktet. Rengjøring og vedlikehold

skal ikke utføres av barn uten tilsyn

Barn under 3 år skal holdes unna produktet med mindre de har

kontinuerlig tilsyn

Barn i alderen 3 til 8 år kan kun slå AV/PÅ produktet, forutsatt at

ovnen er montert slik monteringsanvisningen viser, og barna har

fått instruksjon eller tilsyn vedrørende bruk av produktet på en

sikker måte og forstår farene som er involvert

Bruk aldri denne varmeovnen i nærheten av badekar, dusj eller

svømmebasseng

Ovnen må ikke brukes hvis glasspanelet er skadet

(gjelder produkter som starter modellnavnet med MB).

NO

Modell Termostat Farge Høyde Bredde Strømstyrke IP-grad

NO

Før førstegangsbruk

Førstegangsbruk

Etter utpakking av ovnen, kontroller om det er noen transportskader på produktet.

Skulle det være synlige skader på produktet, ta kontakt med butikken eller importør.

Ta vare på ytteremballasjen for senere transport av ovnen. Om du ønsker å kaste

emballasjen, sørg for at den blir kastet på forsvarlig vis. Hold plastposer unna barn.

Etter å ha skrudd på varmen første gang, eller etter et lengre opphold, vil det kunne

lukte “brent” i en kort tid. Dette er normalt.

Vennligst les hele denne bruksanvisningen nøye før bruk. Ta vare på bruksanvisningen

for senere bruk.

Elektronisk Hvit

Hvit

30,0 cm35,0 cm 250 IPx4

Dag/Natt 40,0 cm65,0 cm 600 IPx4

Dag/Natt 40,0 cm85,0 cm 900 IPx4

Dag/Natt 40,0 cm105,0 cm 1200 IPx4

Dag/Natt 25,0 cm105,0 cm 800 IPx4

Dag/Natt 25,0 cm 121,5 cm 1000 IPx4

Elektronisk 30,0 cm 36,5 cm 250 IPx4

Dag/Natt 40,0 cm 66,5 cm 600 IPx4

Dag/Natt 40,0 cm 86,5 cm 900 IPx4

Dag/Natt 40,0 cm106,5 cm 1200 IPx4

Dag/Natt 25,0 cm106,5 cm

800 IPx4

IB250

IB600DN

IB900DN

IB1200DN

IB800L DN

IB1000L DN

MB250

MB600DN

MB900DN

MB1200DN

Dag/Natt 25,0 cm123,0 cm

1000 IPx4

220-240V~, 50-60Hz

700 IPx4

IB700DN 220-240V~, 50-60Hz

Dag/Natt 40,0 cm65,0 cm

Dag/Natt 25,0 cm105,0 cm 850 IPx4

IB850L DN 220-240V~, 50-60Hz

IB1000DN Dag/Natt 40,0 cm85,0 cm 1000 IPx4220-240V~, 50-60Hz

IB1050L DN Dag/Natt 25,0 cm 121,5 cm 1050 IPx4220-240V~, 50-60Hz

IB1300DN

Dag/Natt 40,0 cm105,0 cm 1300 IPx4220-240V~, 50-60Hz

MB700DN

Dag/Natt 40,0 cm 66,5 cm 700 IPx4220-240V~, 50-60Hz

Dag/Natt 25,0 cm106,5 cm

850 IPx4

220-240V~, 50-60Hz

MB1000DN

Dag/Natt 40,0 cm 86,5 cm 1000 IPx4220-240V~, 50-60Hz

Dag/Natt 25,0 cm123,0 cm 1050 IPx4220-240V~, 50-60Hz

Hvit

MB1300DN

Dag/Natt 40,0 cm106,5 cm 1300 IPx4220-240V~, 50-60Hz

MB800L DN

MB1000L DN

MB850L DN

MB1050L DN

NO

Beskrivelse av ovnen

1.Av/På

2. Veggbrakett

3.Temperatursensor

4. Utslipp varme

5.Termostat

6. Stålfront

1.Av/På

2. Veggbrakett

3.Temperatursensor

4. Utslipp varme

5.Termostat

6. Glassfront

Montering

Lag hull i veggen for hull 1 & 2. Lag detterer hull i veggen for de øverste hullene

(hull 3 & 4 ved hjelp av 6)

Sett pluggene inn i hullene som er laget og fest braketten med 4 skruer

Før ovnen på de nederste festene på brakketen, for så å hekte på ovnen på de

øverste festene (lø noe for å få ovnen inn i sporet på de øverste festene). Skru

fast låseskruene på toppen av braketten (mot klokken)

Kalibrering av temperatur

Det kan oppstå avvik mellom hva ovnen registrerer av temperatur og hva som er

dette, men den mest vanlige er at ovnen står et lite stykke fra der du oppholder deg

i rommet vanligvis. Når du setter feks 22 grader som ønsket temperatur på ovnen er

det helt naturlig og intuitivt å tenke at dette er graden du ønsker i rommet der sofaen

feks er plassert. Dog er det slik at ovnens temperatursensor er plassert på produktet

selv, og dermed kan et slikt avvik oppstå. For å justere dette er alle Millovner utstyrt

med kalibreringsmuligheter, dvs at du kan justere hva ovnen registrerer av temperatur.

OBS! Rommet må ha oppnådd en stabil temperatur før evt. kalibrering.

Trykk inn 2 ganger, og bruk piltastene (+ eller -) for å sette faktisk temperatur

MILL INVISIBLE

≥100 mm

≥50 mm≥50 mm

≥100 mm

≥100 mm foran ovnen

Minimumsavstander

Resette ovnen

Slå av ovnens hovedbryter

Trykk og hold inne mens du slår på ovnens hovedbryter.

Huskefunksjon

Ovnen husker alle temperaturinnstillinger, og vil automatisk gå til ønsket

romtemperatur etter strømbrudd. Dine dag- og nattsenkingsprogrammer vil derimot

bli slettet ved strømbrudd og du må registrere dette på nytt.

“Åpent vindu” funksjon

Ovnen har en “åpent vindu” funksjon som aktiveres straks den registrerte

romtemperaturen synker mer enn 2 grader Celsius på 2 minutter. Ovnen vil automatisk

stoppe å varme og FO vil vises i displayet til ovnen.

Ovnen vil automatisk starte å varme igjen etter 10 minutter (displayet endres fra FO til

ønsket romtemperatur).

Bruksanvisning elektronisk termostat

Vennligst se tabelloversikt side 4 for hvilke modeller som har elektronisk termostat.

1. Display (viser ønsket romtemperatur som standard)

2. Strømindikator – viser om ovnen trekker strøm eller ikke

3.Kontrollknapp (+) (Øke temperatur)

4. Kontrollknapp (-) (Senke temperatur)

5. Funksjonsknapp

FØR OVNEN TAS I BRUK MÅ DEN VÆRE FESTET TIL EN VEGG. HVIS

OVNEN IKKE ER MONTERT KORREKT ELLER SATT OPP SKJEVT, KAN DET FØRE TIL AT

DEN IKKE VIL FUNGERE ELLER I VERSTE FALL BLI ØDELAGT.

Ved strømbrudd vil termostaten gå tilbake til sist satt temperatur

NO

Strømindikator for elektronisk termostat

Når panelovnen trekker strøm (dvs når ovnen varmer) lyser strømindikatoren .

Sett ønsket temperatur for elektronisk termostat

Trykk ned en av piltastene for å stille inn ønsket romtemperatur.

Bruksanvisning dag/natt termostat

1. Display (viser ønsket romtemperatur som standard)

2.Kontrollys natt-funksjon

3.Kontrollys dag-funksjon

4. Strømindikator – viser om ovnen trekker strøm eller ikke

5.Kontrollknapp (+) (Øke temperatur)

6.Kontrollknapp (-) (Senke temperatur)

7. Natt-funksjon

8. Dag-funksjon

9. Funksjonsknapp

Termostaten kan benyttes som en vanlig elektronisk termostat (det vil si at ovnen

holder en jevn temperatur hele døgnet). Se bruksanvisning elektronisk termostat side

6 for mer informasjon.

Ved strømbrudd vil termostaten gå tilbake til sist satt temperatur

FØR OVNEN TAS I BRUK MÅ DEN VÆRE FESTET TIL EN VEGG. HVIS OVNEN

IKKE ER MONTERT KORREKT ELLER SATT OPP SKJEVT, KAN DET FØRE TIL AT DEN IKKE

VIL FUNGERE ELLER I VERSTE FALL BLI ØDELAGT.

Vennligst se tabelloversikt side 4 for hvilke modeller som har dag/natt termostat.

NO

Leht laadib ...

MILL GLASS 850W PANELOVN Kasutusjuhend

MILL GLASS 850W PANELOVN Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid