Husqvarna BA101 Omaniku manuaal

Tüüp
Omaniku manuaal
BA101
EN Operator's manual 2-15
BG Ръководство за експлоатация 16-29
CS Návod k použití 30-42
DA Brugsanvisning 43-54
DE Bedienungsanweisung 55-68
EL Οδηγίες χρήσης 69-83
ES Manual de usuario 84-96
ET Kasutusjuhend 97-108
FI Käyttöohje 109-121
FR Manuel d'utilisation 122-135
HU Használati utasítás 136-148
LT Operatoriaus vadovas 149-160
LV Lietošanas pamācība 161-173
NL Gebruiksaanwijzing 174-186
NO Bruksanvisning 187-198
PL Instrukcja obsługi 199-212
PT Manual do utilizador 213-226
RO Instrucţiuni de utilizare 227-239
RU Руководство по эксплуатации 240-254
SK Návod na obsluhu 255-267
SL Navodila za uporabo 268-279
SV Bruksanvisning 280-291
TR Kullanım kılavuzu 292-303
ZH 操作手册
EN-US Operator's manual
FR-CA Manuel d’utilisation
304-313
ES-MX 330-337
IT-US Manual de usuario
Manuale dell'operatore 338-345
314-321
322-329
Contents
Introduction..................................................................... 2
Safety..............................................................................3
Operation........................................................................ 9
Maintenance................................................................... 9
Transportation, storage and disposal........................... 10
Technical data.............................................................. 10
Declaration of Conformity............................................. 12
Introduction
Product description
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of the products without prior notice.
Note: This manual cover both gasoline operated and
battery operated power units.
Intended use
WARNING: This
attachment may only be
used together with the
intended power unit. See
the accessory chapter in
the Operator's manual
for the power unit.
The attachment is only designed for blowing lawns,
pathways, asphalt roads and the like.
Attachment overview
1
2
3
4
5
1. Shaft
2. Air intake screen
3. Fan housing
4. Air nozzle
5. Operator′s manual
Symbols on the attachment and on the
power unit
Careless or incorrect use of this
attachment can result in serious or fatal
injury to the operator or others.
2747 - 006 - 24.05.2022
Read the operator’s manual carefully
and make sure you understand the in-
structions before you use the attach-
ment.
This attachment is in accordance with
applicable EC directives.
This product conforms to applicable UK
regulations.
Use approved hearing, eye and breathing
protection.
Use approved protective gloves.
Noise emission to the environment
according to the European Community’s
Directive. The attachment’s emission is
specified in the Technical data chapter
and on the label.
The blower operator must ensure that
no people or animals come closer
than 15 meters. When several opera-
tors are working at the same site a
safety distance of at least 15 meters
must be in effect. The blower can for-
cibly throw objects that can bounce
back. This can result in serious eye
injuries if the recommended safety
equipment is not used.
The blower can forcibly throw
objects that can bounce
back. This can result in seri-
ous eye injuries if the recom-
mended safety equipment is
not used.
The operator of the product
must ensure, while working,
that no persons or animals
come closer than 15 meters.
Severing of fingers or hand by fan blade.
Do not open or remove the safety guards
or nets while engine is running.
Note: Other symbols/decals on the attachment refer
to special certification requirements for certain markets.
Safety
Safety definitions
Warnings, cautions and notes
are used to point out specially
important parts of the operator's
manual.
WARNING: Used if
there is a risk of
injury or death for the
operator or bystanders
if the instructions in the
manual are not obeyed.
CAUTION: Used if there
is a risk of damage
to the product and/or
the attachment, other
materials or the adjacent
area if the instructions
in the manual are not
obeyed.
Note: Used to give more
information that is necessary in
a given situation.
747 - 006 - 24.05.2022 3
General safety instructions
WARNING: Read the
safety instructions that
follow before you use the
attachment.
Please read the operator’s
manual carefully and make
sure you understand the
instructions before using the
attachment.
This Operator's manual
should be read together with
the Operator's manual for
the power unit to get the
complete user information.
Under no circumstances
may the design of the
attachment be modified
without the permission of the
manufacturer. Do not use
an attachment that appears
to have been modified
by others and always
use original accessories.
Non-authorized modifications
and/or accessories can result
in serious personal injury or
the death of the operator or
others.
Safety instructions for operation
WARNING: Read the
warning instructions that
follow before you use the
product.
WARNING: This
product produces an
electromagnetic field
during operation. This
field may under some
circumstances interfere
with active or passive
medical implants. To
reduce the risk of
serious or fatal injury,
we recommend persons
with medical implants to
consult their physician
and the medical implant
manufacturer before
operating this product.
Never use the product if you
are tired, if you are ill, if you
have consumed alcohol, or if
you are taking other drugs
or medication that can affect
your vision, judgement or co-
ordination.
Never use a product that is
faulty.
All covers and guards must
be fitted before starting. If
you have a gasoline operated
product, ensure that the spark
plug cap and ignition lead are
undamaged to avoid the risk
of electric shock.
The blower operator must
ensure that no people or
animals come closer than
4747 - 006 - 24.05.2022
15 meters. When several
operators are working at the
same site a safety distance of
at least 15 meters must be in
effect.
Never allow children to use
the product.
Never allow anyone else to
use the product without first
ensuring that they have read
and understood the contents
of the operator’s manual.
Never remove the air intake
screen.
Never touch the spark plug
or ignition cable while the
engine is running. Touching
the spark plug or plug may
result in being subjected to an
electrical shock.
Always contact local
authorities and make sure
you are following applicable
directives.
Keep all parts of your body
away from hot surfaces.
If you encounter a situation
where you are uncertain how
to proceed you should ask an
expert. Contact your dealer or
your service workshop. Avoid
all usage which you consider
to be beyond your capability.
Hold the opening of the
blower as close to the ground
as possible. Utilize the entire
length of the blow pipe to
keep the air stream close to
the ground.
Use the machine during
normal working hours to avoid
unnecessary disturbance.
Avoid working early in the
morning or late at night.
Be aware of your
surroundings. If anyone
approaches your work area,
release the throttle/power
trigger until the person is at
a safe distance. Direct the
blower away from people,
animals, play areas, open
windows and cars etc. The
force of air can cause rocks,
dirt or sticks to be thrown or
to ricochet which can injure
people or animals, break
glass or cause other damage.
Never put hands or other
objects into blower housing to
avoid serious injury from the
rotating impeller.
Keep outside surface free
from oil and fuel.
Never use for spreading
chemicals, fertilizer or other
substances which may
contain toxic materials.
To avoid spreading fire, do
not use near leaf or brush
fire, fireplaces, barbecue pits,
ashtrays, etc.
747 - 006 - 24.05.2022 5
Never douse or squirt the
attachment with water or any
other liquid.
Always use both hands to
hold the machine. Hold the
machine at the side of your
body.
If you have a gasoline
operated product, allow
the engine to cool before
refueling.
The powerful streams of air
can move objects at such a
speed that they can bounce
back and cause serious eye
injuries.
Stop the engine/motor before
assembling or dismantling
accessories or other parts.
Do not use the product in
bad weather, such as dense
fog, heavy rain, strong wind,
intense cold, etc. Working in
bad weather is tiring and can
lead to dangerous conditions,
e.g. slippery surfaces.
Make sure you can move
and stand safely. Check
the area around you for
possible obstacles (roots,
rocks, branches, ditches, etc.)
in case you have to move
suddenly. Take great care
when working on sloping
ground.
Never put the product down
with the engine/motor running
unless you have it in clear
sight.
If you have a gasoline
operated product, the engine
exhaust fumes contain carbon
monoxide, which can cause
carbon monoxide poisoning.
For this reason you should
not start or run the product
indoors, or anywhere that is
poorly ventilated.
The blower must not be
used while on a ladder or
scaffolding, or in high places
(such as roofs). This work
could result in severe injury.
Do not use the product unless
you are able to call for help in
the event of an accident.
6747 - 006 - 24.05.2022
Never place any objects in air
intake opening as this could
restrict proper air flow and
cause damage to the unit.
Make sure that the product
do not hit any fence, tree
or other hard material. This
could cause damage to the
machine and lead to severe
injury.
Listen out for warning signals
or shouts when you are
wearing hearing protection.
Always remove your hearing
protection as soon as the
engine/motor stops.
Personal protective equipment
WARNING: Read the
warning instructions that
follow before you use the
product.
Always use approved
personal protective
equipment when you use the
product. Personal protective
equipment cannot fully
prevent injury but it decreases
the degree of injury if an
accident does occur. Let your
dealer help you select the
right equipment.
Use approved hearing
protection that provides
adequate noise reduction.
Long-term exposure to noise
can result in permanent
hearing impairment.
Use approved eye protection.
If you use a visor, you must
also use approved protective
goggles. Approved protective
goggles must comply with
the ANSI Z87.1 standard in
the USAs or EN 166 in EU
countries.
Use breathing protection
when there is a risk of dust.
Use gloves when necessary,
for example when you
attach, examine or clean the
equipment.
747 - 006 - 24.05.2022 7
Use sturdy non-slip boots or
shoes.
Use clothing made of a strong
fabric. Always use heavy,
long pants and long sleeves.
Do not use loose clothing
that can catch on twigs
and branches. Do not wear
jewelry, short pants, sandals
or go with bare feet. Put your
hair up safely above shoulder
level.
Keep first aid equipment
close at hand.
Safety instructions for
maintenance
WARNING: Read the
warning instructions that
follow before you operate
the product.
Carry out an overall inspection
of the product before use. See
the maintenance schedule.
Carry out the maintenance and
service instructions described in
this manual. Some maintenance
and service measures must
be carried out by trained
and qualified specialists.
See instructions under the
Maintenance heading.
Always check for any objects
that may block the air intake
screen before beginning work.
In order to prevent damage
due to falling of the product,
assembly and dismantling
should be conducted close to
the ground surface.
8747 - 006 - 24.05.2022
Operation
To use the attachment
Note: Show consideration to persons in your
surroundings by avoiding using the machine at
unsuitable times, such as late in the evening or early
in the morning. Reduce the noise levels by limiting the
number of equipment units used simultaneously. Read
through and follow the simple directions so that you
disturb your surroundings as little as possible.
1. Use a rake or a brush to release rubbish stuck to the
ground.
2. Clean corners by starting in corners and moving
outward. This will help prevent an accumulation of
debris which could fly into your face.
3. Use the blower with the lowest possible throttle/
speed. It is seldom necessary to use full throttle/
speed, and many work procedures can be done
at half throttle/speed. A lower throttle/speed means
less noise and less dust, and it is also easier to keep
control over the rubbish collected together/moved.
4. Minimise the blowing time by lightly wetting dusty
areas or using spray equipment.
5. Reduce water consumption by using blowers instead
of water hoses for different applications around the
lawn and garden, such as lattices, screens, grills,
porches, etc.
6. Be careful when working near plants. The force of
the air could damage tender plants.
7. The speed of the air jet is regulated by means of the
throttle/power trigger. Select the speed best suited
for respective tasks.
8. Be aware of the wind direction. Work with the wind to
make your work easier.
9. Using the blower to move large piles is time
consuming and creates unnecessary noise.
10. Keep a good balance and a firm foothold.
11. Keep clearance between the tube and ground to
avoid contact with the ground when working with the
product.
12. Clean up afterwards. Make sure that you have not
blown rubbish into someone’s garden. Dispose of
debris in trash receptacle.
13. When work is finished the product should be stored
horizontally.
Maintenance
Introduction
Below you will find some general maintenance
instructions. If you need further information please
contact your service workshop.
To perform daily maintenance on the
attachment
WARNING: Always stop
the engine/motor before
you clean or do
maintenance on the
attachment. If you have
a gasoline operated
product, disconnect the
ignition cable from the
spark plug. If you have a
battery operated product,
remove the battery.
WARNING: Keep all parts
of your body away from
hot surfaces.
1. Clean the exterior surface of the blower.
2. Make sure that all the housing are free of cracks.
3. Make sure that the product is in perfect working
order.
4. Make sure that all nuts and screws are tight.
5. Clean the labels using a damp cloth with a mild
detergent.
747 - 006 - 24.05.2022 9
To check the air intake screen
1. Check that the air intake is not blocked on all
sides including the underside, for example, by
leaves or rubbish. A clogged air intake reduces
the product’s blowing capacity and increases the
working temperature of the engine/motor, which can
result in engine/motor failure. Stop the engine/motor
and remove the object.
Transportation, storage and disposal
Transport and storage
Perform the following steps after each use:
Allow attachment to cool before storing or
transporting.
Store in a high, cool, dry, indoor area out of reach for
children.
Seasonal storage
Prepare attachment for storage at end of season or if
it will not be used for 30 days or more. If your blower
attachment is to be stored for a period of time:
Clean the unit.
Inspect attachment for any loose or damage parts.
Tighten any loose screws.
Replace any damaged, worn or broken parts.
At the beginning of the next season, use only fresh
fuel having the proper petrol to oil ratio.
Technical data
Technical data for gasoline operated products
BA101
Weight
Weight, kg 1.9
Noise emissions
Sound power level, measured dB (A) 109
Sound power level, guaranteed LWA dB (A) 112
Sound levels 1
Equivalent sound pressure level at the operator’s ear, measured according to
EN15503 dB(A)
99
1The equivalent sound pressure level value is calculated with a work cycle of a duration of 1/7 for idling and
6/7 for racing. Reported data for equivalent sound pressure level for the machine has a typical statistical
dispersion (standard deviation) of 1 dB(A).
10 747 - 006 - 24.05.2022
BA101
Vibration levels 2
Equivalent vibration levels (ahv,eq) at handles, measured according to EN 15503, m/s2
Front/rear handles: 5.6/8.3
Fan performance 3
Max. air velocity with standard nozzle, m/s: 66
Air flow with standard nozzle, m3/min 15
Technical data for battery operated products
325iLK + Blower attachment BA101
Weight
Weight, kg 2.3+1.9
Noise emissions 4
Sound power level, measured dB (A) 103
Sound power level, guaranteed LWA dB (A) 106
Sound levels 5
Sound pressure level at the operator’s ear, measured according to ISO 26868 dB(A)
Equipped with approved accessory (original), dB (A) 93
Vibration levels 6
Vibration levels at handles, measured according to EN 62841-1, m/s2
Equipped with approved accessory (original), left/right m/s 1.6/1.1
Fan performance 7
Air flow in normal mode with standard nozzle, m3/min 14
Maximum air velocity in normal mode with standard nozzle, m/s: 52
2The equivalent vibration level value is calculated with a work cycle of a duration of 1/7 for idling and 6/7 for
racing. Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1
m/s2.
3Together with 525LK/GC2225C engine unit.
4Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive
2000/14/EC. Reported sound power level for the machine has been measured with the original cutting
attachment that gives the highest level. The difference between guaranteed and measured sound power
is that the guaranteed sound power also includes dispersion in the measurement result and the variations
between different machines of the same model according to Directive 2000/14/EC.
5Reported data for sound pressure level for the machine has a typical statistical dispersion (standard deviation)
of 3 dB (A) and has been measured with the original attachment that gives the highest level. Measured
together with the 325iLK motor unit.
6Reported data for vibration level has a typical statistical dispersion (standard deviation) of 2 m/s2. For compar-
ison of vibrations levels, battery and combustion products use vibration calculator. refer to, https://www.husq-
varna.com/uk/services-solutions/vibration-calculator/. Measured together with the 325iLK motor unit.
7Measured together with the 325iLK motor unit.
747 - 006 - 24.05.2022 11
Declaration of Conformity
EU Declaration of Conformity
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare on our sole responsibility that
the product:
Description Blower attachment
Brand Husqvarna
Type / Model BA101
Identification Serial numbers dating from 2022 and onwards
complies fully with the following EU directives and
regulations:
Regulation Description
2006/42/EC "relating to machinery"
2000/14/EC "relating to the noise emissions in the environment"
2011/65/EU "on the restriction of the use of certain hazardous substances in electrical and electronic
equipment"
and that the following standards and/or technical
specifications are applied: EN15503:2009+A2:2015, EN
ISO 12100:2021, EN IEC 63000:2018.
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden has performed voluntary
type examination on behalf of Husqvarna AB.
Certificate number: SEC/15/2416 – Husqvarna BA101.
For information relating to noise emissions, refer to
Technical data on page 10
.
Huskvarna, 2022-05-09
Stefan Holmberg, R&D Director, Technology
Management, Husqvarna AB
Responsible for technical documentation
12 747 - 006 - 24.05.2022
UK Declaration of Conformity
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare on our sole responsibility that
the product:
Description Blower attachment
Brand Husqvarna
Type / Model BA101
Identification Serial numbers dating from 2022 and onwards
complies fully with the following UK directives and
regulations:
Description
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012
The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, schedule 9
Electromagnetic Compatibility Regulations 2016
and that the following standards and/or technical
specifications are applied: EN15503:2009+A2:2015, EN
ISO 12100:2021, EN IEC 63000:2018.
For information relating to noise emissions, refer to
Technical data on page 10
.
Huskvarna, 2022-05-09
Stefan Holmberg, R&D Director, Technology
Management, Husqvarna AB
Responsible for technical documentation
UK Importer:
Husqvarna UK Ltd
Preston Road, Co. Durham
DL5 6UP
747 - 006 - 24.05.2022 13
EU Declaration of Conformity
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare on our sole responsibility that
the product:
Description Blower attachment with power unit Husqvarna 325iLK
Brand Husqvarna
Type / Model BA101
Identification Serial numbers dating from 2022 and onwards
complies fully with the following EU directives and
regulations:
Regulation Description
2006/42/EC "relating to machinery"
2000/14/EC "relating to the noise emissions in the environment"
2011/65/EU "on the restriction of the use of certain hazardous substances in electrical and electronic
equipment"
and that the following standards and/or technical
specifications are applied: IEC 60335-2-100, EN IEC
63000:2018.
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden has performed voluntary
type examination on behalf of Husqvarna AB. Certificate
number: SEC/15/2416 – Husqvarna BA101.
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden has also verified
agreement with the appendix V of the council's directive
2000/14/EG. Certificate number: 01/012/014.
For information relating to noise emissions, refer to
Technical data on page 10
.
Huskvarna, 2022-05-09
Stefan Holmberg, R&D Director, Technology
Management, Husqvarna AB
Responsible for technical documentation
14 747 - 006 - 24.05.2022
UK Declaration of Conformity
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare on our sole responsibility that
the product:
Description Blower attachment with power unit Husqvarna 325iLK
Brand Husqvarna
Type / Model BA101
Identification Serial numbers dating from 2022 and onwards
complies fully with the following UK directives and
regulations:
Description
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012
The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, schedule 9
Electromagnetic Compatibility Regulations 2016
and that the following standards and/or technical
specifications are applied: IEC 60335-2-100, EN IEC
63000:2018.
For information relating to noise emissions, refer to
Technical data on page 10
.
Huskvarna, 2022-05-09
Stefan Holmberg, R&D Director, Technology
Management, Husqvarna AB
Responsible for technical documentation
UK Importer:
Husqvarna UK Ltd
Preston Road, Co. Durham
DL5 6UP
747 - 006 - 24.05.2022 15
Съдържание
Въведение................................................................... 16
Безопасност.................................................................18
Операция..................................................................... 24
Поддръжка...................................................................25
Транспортиране, съхранение и изхвърляне.............26
Технически данни....................................................... 26
Декларация за съответствие......................................28
Въведение
Описание на продукта
Ние имаме политика на непрекъснато развитие на
своите продукти и затова запазваме правото си да
променяме тяхната конструкция и външен вид без
предизвестие.
Забележка: Това ръководство обхваща както
бензинови, така и захранвани с акумулаторни
батерии захранващи блокове.
Предназначение
ПРЕДУПРЕЖДЕНИЕ: Тази
приставка може да
се използва само
с предназначения
захранващ блок.
Вижте главата за
принадлежности в
инструкцията за
експлоатация за
захранващия блок.
Приставката е предназначена само за използване в
морави, пътеки, асфалтови пътища и подобни.
Общ преглед на приставка
1
2
3
4
5
1. Вал
2. Филтър на смукателния въздухопровод
3. Капак на вентилатора
4. Въздушна дюза
5. Ръководство за оператора
Символи върху приставката и
захранващия блок
Невнимателното или неправилното
използване на тази приставка може да
доведе до сериозно или смъртоносно
16 747 - 006 - 24.05.2022
нараняване на оператора или други
лица.
Прочетете внимателно ръковод-
ството за оператора и се уверете,
че разбирате инструкциите, преди
да използвате приставката.
Тази приставка отговаря на
изискванията на приложимите
директиви на EO.
Този продукт съответства на
приложимите регламенти на
Обединеното кралство.
Използвайте одобрена защита на
слуха, очите и дишането.
Използвайте одобрени защитни
ръкавици.
Шумови емисии в околната среда
в съответствие с Директивата на
Европейската общност. Емисиите на
приставката са посочени в раздела
за технически характеристики и на
етикета.
Операторът на моторната метла
трябва да се увери, че хора или
животни не се приближават на по-
малко от 15 метра. Когато няколко
оператора работят в един и същ
обект, трябва да се спазва безо-
пасно разстояние от поне 15 метра.
Моторната метла може да изхвър-
ли предмети с голяма сила, които
да отскочат обратно. Това може
да доведе до сериозни наранява-
ния на очите, ако не се използват
препоръчителните предпазни сред-
ства.
Моторната метла може да
изхвърли предмети с голя-
ма сила, които да отскочат
обратно. Това може да до-
веде до сериозни нараня-
вания на очите, ако не се
използват препоръчителни-
те предпазни средства.
По време на работа опера-
торът на продукта трябва
да увери, че лица или жи-
вотни не се приближават
на по-малко от 15 метра.
Отрязване на пръсти или на
ръка от лопатката на вентилатора.
Не отваряйте и не отстранявайте
предпазителите или мрежите, когато
двигателят работи.
Забележка: Останалите символи/стикери върху
приставката се отнасят за специфични изисквания
по отношение на сертификати за определени
пазари.
747 - 006 - 24.05.2022 17
Безопасност
Дефиниции за безопасност
Предупреждения, знаци за
внимание и бележки се
използват за указване
на особено важни части
на инструкцията за
експлоатация.
ПРЕДУПРЕЖДЕНИЕ:
Използва се, ако
има опасност от
нараняване или смърт
за оператора или за
околните, ако не се
спазват инструкциите в
ръководството.
ВНИМАНИЕ: Използва
се, ако има опасност
от повреждане на
продукта и/или
приставката, други
материали или
съседната зона, ако
не се спазват
инструкциите в
ръководството.
Забележка: Използва се за
предоставяне на повече
информация, която е
необходима в дадена
ситуация.
Общи инструкции за
безопасност
ПРЕДУПРЕЖДЕНИЕ:
Прочетете следващите
инструкции за
безопасност, преди
да използвате
приставката.
Прочетете внимателно
ръководството за оператора
и се уверете, че разбирате
инструкциите, преди да
използвате приставката.
Тази инструкция за
експлоатация трябва
да се прочете
заедно с инструкцията
за експлоатация на
захранващия блок,
за да получите
цялата потребителска
информация.
При никакви обстоятелства
не бива да се
нанасят модификации
в първоначалната
конструкция на приставката
без разрешение от
производителя. Не
използвайте дадена
приставка, когато се вижда,
че е модифицирана от
други лица, и винаги
18 747 - 006 - 24.05.2022
използвайте оригинални
принадлежности.
Неразрешени изменения
и/или приспособления може
да предизвикат сериозни
телесни повреди или
смъртта на оператора или
други лица.
Инструкции за безопасност за
работа
ПРЕДУПРЕЖДЕНИЕ:
Прочетете следващите
предупредителни
указания, преди да
използвате продукта.
ПРЕДУПРЕЖДЕНИЕ:
Тази машина създава
електромагнитно поле
по време на работа.
При някои условия
това поле може
да интерферира
с активни или
пасивни медицински
имплантанти. За
да намалите
риска от сериозно
или смъртоносно
нараняване, ние
препоръчваме лицата
с медицински импланти
да говорят с лекаря
си и производителя на
медицинския имплант,
преди да започнат да
работят с този продукт.
Никога не използвайте
продукта, ако сте
уморени, ако сте болни,
ако сте употребили
алкохол или ако взимате
лекарства, които влияят
на зрението, преценката
или координацията на
движенията.
Никога не използвайте
продукт, който е
неизправен.
Всички капаци и
предпазители трябва да
са поставени преди
стартиране. Ако имате
продукт, който работи с
бензин, проверете дали
лулата на запалителната
свещ и запалващият кабел
са изправни, за да
избегнете опасността от
електрически удар.
Операторът на
компресорното оборудване
трябва да се увери, че
хора или животни не се
приближават в радиус от
15 метра. Когато няколко
оператора работят в един
и същ обект, трябва
да се спазва безопасно
разстояние от поне 15
метра.
747 - 006 - 24.05.2022 19
Никога не позволявайте
на деца да използват
продукта.
Не позволявайте никой
друг да използва продукта,
без първо да сте се
уверили, че е прочел
и разбрал съдържанието
на инструкцията за
експлоатация.
Никога не вадете
филтъра на смукателния
въздухопровод.
Никога не докосвайте
запалителната свещ или
запалителния кабел,
докато двигателят работи.
Докосването на проводника
на свещта или проводника
може да доведе до
електрически удар.
Винаги се обръщайте
към местните органи на
властта, за да се уверите,
че не нарушавате някоя
нормативна разпоредба.
Пазете всички части на
тялото си далеч от горещи
повърхности.
Ако се окажете в ситуация,
в която сте неуверени
как да постъпите,
се посъветвайте със
специалист. Свържете се
с дистрибутора или със
сервиза. Избягвайте всяка
употреба, за която се
чувствате недостатъчно
квалифицирани.
Дръжте изходната тръба
на метлата възможно
най-близо до земята.
Използвайте цялата
дължина на въздушната
тръба, за да държите
въздушния поток близо до
земята.
Използвайте машината
през стандартното работно
време, за да избегнете
ненужни смущения. Не
работете рано сутрин или
късно вечер.
Внимавайте за околната
среда. Ако някой
наближи работната Ви
зона, освободете газта/
захранващия спусък, докато
човекът мине на безопасно
разстояние. Насочвайте
компресорното оборудване
настрани от хора, животни,
площадки за игра, отворени
прозорци и автомобили и
др. Силата на въздуха
може да изхвърли камъни,
пръст или клони или те
да рикошират, при което
може да пострадат хора
или животни, да бъдат
счупени стъкла или да бъде
причинена друга повреда.
Никога не поставяйте ръка
или предмети в корпуса на
духалката, за да се избегне
20 747 - 006 - 24.05.2022
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348

Husqvarna BA101 Omaniku manuaal

Tüüp
Omaniku manuaal