Innov2Learn Thermo Kasutusjuhend

Bränd
Innov2Learn
Mudel
Thermo
Tüüp
Kasutusjuhend
1
Thermo User’s Manual
www.innov2learn.ca
1/2
1- Ejection Button
Eject the probe cover by pressing
the ejection button.
2- Box of probe Covers
3- Probe
4- Probe Connector
5- LCD Display
Display the current test results.
6- F/ C Button
Press the F/C (Fahrenheit/Celsius)
button to toggle between tempera-
ture scales any time temperature is
displayed on the LCD.
7- Mode Selection
Press this button to change the
current measurement site.
8- ON& OFF Button
Turns the device On or OFF,
and displays the battery’s
current state.
- Hold it for 3 seconds to turn
it ON or OFF.
9- USB type C
The USB cable is inserted here
in order to recharge the device.
10- USB 3 Micro-B
The USB cable is inserted here
in order to recharge the device.
2
Thermo User’s Manual
www.innov2learn.ca
2/2
1- Turn on the device
Hold the On / Off button for about 3
seconds
2- Connect to device
Open de SYHM app
2.1 - Android/ iOS apps:
- Open the app, select the
language an then click OK.
- Click on Thermometer.
- Your device must be shown
under Available Devices.
- Click on the device name.
2.2 - Windows / Mac OS X apps:
- Connect the USB bluetooth
dongle to your pc.
- Open the app and click on "Add
Device +".
- Your device must now appear on
the list.
- Click on the device name.
3- Insert the probe
Insert the probe tip on the
designated place.
4- Change the thermometer
status
On the SYHM app, press the
“Analysis” button.
5- Check the device status
The LCD display is now showing
“Processing...”.
6- Send the test result to the
device
The applications are now show-
ing a notification indicating that
the device is ready to receive the
test results.
Enter the desired value and click
on the “Send” button.
7- Check the results
The results appear on the LCD
display.
How it works
Recharging the Battery
When the battery is low, the ON/OFF button will return red.
To recharge the device, plug the charge in one of the USB ports. Both USB ports
can be used to recharge the device. Wich one to use is up to you.
While the battery recharges, the ON/OFF button will remain yellow.
When the recharge is finished, the ON /OFF button will turn green, indicating that
the battery is 100%.
  • Page 1 1
  • Page 2 2

Innov2Learn Thermo Kasutusjuhend

Bränd
Innov2Learn
Mudel
Thermo
Tüüp
Kasutusjuhend
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid