Starlane MAAT 2.0 Kasutusjuhend

Bränd: Starlane

Mudel: MAAT 2.0

Tüüp: Kasutusjuhend

User guide

MAAT 2.0 is the software for Windows 10 - 8 – 7 and Mac OS X High Sierra and

following supplied with Starlane Stealth GPS-4, Corsaro and DaVinci-II laptimers and

data acquisition systems to allow configuration, data analysis, storage and printing.

MAAT 2.0 – User Guide 
 
2 
INDEX 
 
INTRODUCTION ............................................................................................................................................. 4 
INSTALLATION ............................................................................................................................................... 4 
USER INTERFACE ........................................................................................................................................... 5 
TITLE BAR THE TITLE BAR SHOWS THE VERSION NUMBER OF MAAT SOFTWARE. ........................................................ 5 
MENU ................................................................................................................................................................................. 5 
ICON BAR ........................................................................................................................................................................... 6 
CONNECTION OF STEALTH GPS-4 VIA USB PENDRIVE ...................................................................................... 7 
FIRST CONNECTION OF STEALTH GPS-4 ........................................................................................................................... 7 
CONNECTION OF CORSARO VIA BLUETOOTH ................................................................................................ 10 
CONNECTION TO PC WITH WINDOWS 8 – 10 OR APPLE MAC OS X (SEE BELOW FOR WINDOWS 7) ......................... 10 
PAIRING WITH PC ............................................................................................................................................................ 10 
CONNECTION TO PC WITH WINDOWS 7 ........................................................................................................................ 13 
CONNECTION OF DAVINCI-II VIA USB CABLE ................................................................................................. 16 
FIRST CONNECTION ......................................................................................................................................................... 16 
DATA DOWNLOAD....................................................................................................................................... 19 
HOW TO DOWNLOAD DATA FROM STEALTH GPS-4, CORSARO AND DAVINCI-II ......................................................... 19 
UPDATING FIRMWARE .................................................................................................................................................... 21 
VERIFICATION OF THE VERSION OF FIRMWARE INSTALLED AND DOWNLOAD OF THE UPDATE ................................ 21 
STEALTH GPS-3/4 FIRMWARE UPDATE .......................................................................................................................... 23 
HOW TO SET PERSONAL TRACKS .................................................................................................................. 24 
CREATION AND MANAGEMENT OF THE PERSONAL TRACKS LIST ................................................................................. 24 
ENTER THE COORDINATES OF A TRACK USING SATELLITE MAPS .................................................................................. 25 
MANUALLY ENTERING THE COORDINATES OF A NEW TRACK ...................................................................................... 27 
SEARCHING FOR A TRACK USING A LOCATION SERVICE ................................................................................................ 28 
SESSION ARCHIVE ........................................................................................................................................ 31 
INTRODUCTION TO DATA ANALYSIS ............................................................................................................. 33 
THE VIEWS ....................................................................................................................................................................... 33 
ICON BAR ......................................................................................................................................................................... 34 
VIEWS TAB ....................................................................................................................................................................... 35 
LAP SLIDER ....................................................................................................................................................................... 35 
SESSION CHRONOLOGY ................................................................................................................................................... 36 
TIME\DISTANCE BASED CHART ....................................................................................................................................... 37 
HOW TO ZOOM IN THE CHART ....................................................................................................................................... 41 
REPEAT THE SAME OPERATION BUT DRAGGING THE MOUSE TOWARDS THE LEFT TO ZOOM OUT. ......................... 41 
HOW TO PERFORM A THOROUGH ANALYSIS OF A CHANNEL IN THE AREA BETWEEN TWO CURSORS ...................... 42 
TABLE OF MINIMUM, AVERAGE AND MAXIMUM ......................................................................................................... 44 
TRACK MAP ...................................................................................................................................................................... 45 
XY CHART ......................................................................................................................................................................... 46 
LAPS COMPARISON ......................................................................................................................................................... 49 
THE CHRONOLOGY IN COMPARISON ............................................................................................................................. 51 
THE TRACK MAP IN COMPARISON .................................................................................................................................. 52 
TWO CURSORS MEASURE IN COMPARISON .................................................................................................................. 52 

MAAT 2.0 – User Guide

DELTA TIME AND DISTANCE CHART................................................................................................................................ 53

OFFSET OF THE GRAPHS IN COMPARISON ..................................................................................................................... 54

SETTING DAVINCI-II DASHBOARDS ............................................................................................................... 55

SETTING DAVINCI-II SCREENS .......................................................................................................................................... 57

MAAT 2.0 HOTKEYS ..................................................................................................................................... 61

MAAT 2.0 – User Guide

INTRODUCTION

MAAT is the latest version of the analysis software developed for Corsaro and DaVinci-II line products

as an alternative to the previous DigiRace-MMX package.

MAAT does not allow direct communication with other Starlane products but it is always possible to

load the data sessions downloaded with DigiRace-MMX into MAAT.

INSTALLATION

1. Download the software from the TECHNICAL SUPPORT section of Starlane website

http://www.starlane.com

2. Unzip the downloaded zip file and run the Setup_Maat.exe installation file, on Mac OS X run the

Installer_MAAT.PKG file that will install the software.

3. The installation procedure will start. Proceed according to the installation instructions shown

during the process.

Getting started

After the installation the MAAT icon appears on the desktop.

To start the program, double click on the icon on the desktop, or start it from

Start> Programs> MAAT> MAAT 2.0 while, on Mac OS X, you can find the link in Applications.

MAAT 2.0 – User Guide

USER INTERFACE

The MAAT interface consists of the Title Bar and the Menu at the top, followed by the Icon Bar and

the Main Panel in the middle.

TITLE BAR

The Title bar shows the version number of MAAT software.

The Menu consists of the following sections:

TOOLS

Command to choose the instrument to access the analysis.

DEVICES

Setting communication parameters and updating the on-board software of the

device (firmware).

TRACK

MANAGEMNT

Opening the Track Management window.

USER GUIDE

Allows to access the user manuals and hot keys reference.

LANGUAGE

Choice of MAAT software language

HELP

View user manuals, hot keys and software version information.

MAAT 2.0 – User Guide

Icon Bar

The Icon Bar includes the buttons for the main functions and the connection menu with the list of

paired devices:

Connection to:

Allows you to select the device to which you want to connect between those

set.

Data Download

Opens the data download panel.

Session Archive

Opens the window with the list of downloaded sessions.

Math Channels

Opens the Math Channels management panel.

Communication

Shows the list of paired devices and let you pair new ones or remove them.

DaVinci-II

Settings

Opens the panle to manage settings and channels on DaVinci-II dashboards.

Firmware

Update

It allows you to update the selected device to the latest Firmware version

downloaded from http://www.starlane.com

MAAT 2.0 – User Guide

CONNECTION OF STEALTH GPS-4 VIA USB PENDRIVE

The following guidelines also apply to older Stealth GPS-3 and models Stealth GPS-3X.

At the first connection it is necessary to configure your Stealth so that, every time the USB Pendrive is

connected, MAAT can recognize it and automatically set the name of the driver and device for data

download or settings.

First connection of Stealth GPS-4

1. Verify MAAT is running.

2. Turn on the Stealth.

3. Insert the USB Pendrive into the socket on the Stealth harness so that Stealth initializes the

Pendrive and creates the Starlane folder on it.

4. Once the Pendrive menu appears on the Stealth display, remove the USB Pendrive.

5. Insert the USB Pendrive into one of the USB ports on the PC.

6. After a few seconds the following message will automatically appear:

7. Click on the SET button, the following panel will open:

MAAT 2.0 – User Guide

8. In the Device Name enter a name that will allow you to unequivocally identify the connected

DaVinci-II in case you have a team with more drivers and devices (eg Moto 1 Luke).

9. Type the name of the Vehicle (Eg RSV4).

10. Type the name of the Driver (es. Luke).

11. Confirm by the OK button.

12. By this moment the communication with your Stealth has been configured and the device will

be identified automatically each time the USB Pendrive is inserted as indicated in the Icon Bar.

If you download the sessions from the Stealth to the Pendrive, you can insert it into the PC

and, as explained in the next paragraphs, use the button to download them in MAAT or

the button to update the Stealth Firmware:

13. Clicking on the icon It will always be possible to see the list of configured devices and

modify the configuration or remove them from the list:

MAAT 2.0 – User Guide

Note: connecting via USB Pendrive does not use COM ports so it is correct that

the COM port in the panel is shown as Not Available.

MAAT 2.0 – User Guide

CONNECTION OF CORSARO VIA BLUETOOTH

Connection to PC with WINDOWS 8 – 10 or APPLE MAC OS X (see below for Windows 7)

To enable Bluetooth communication between the PC and the Starlane device, the computer must be

equipped with a Bluetooth device (standard on some portable PCs or purchased at any electronics,

computer store as a USB dongle).

NOTE: The configuration procedure for devices equipped with Bluetooth is the same. For this

reason the configuration procedure is shown only for CORSARO.

Pairing with PC

1. Verify Bluetooth is fully operational on your PC.

2. Turn on Starlane device and place it within 2-3 meters from the PC.

3. Click on the Communication icon in MAAT icon bar.

4. Turn on the device to be paired, enter the menu and activate the Bluetooth Discoverability in the

Bluetooth menu (the device will be detectable from the PC for 1 minute then it will return to be

hidden).

5. Click on "Add Bluetooth Device" to activate the search for visible Bluetooth devices.

6. Wait a few seconds until the device is detected and indicated, with its serial number, in the

Pairing panel:

If the device is not detected press Refresh.

MAAT 2.0 – User Guide

7. Click on the Pair button to pair the new device.

8. Check the Windows notification box that appears for a few seconds in the lower right corner of

the screen and click it to complete the pairing in Windows.

Attention: generally the pairing takes place without any passkey, but some PC Bluetooth

management software still require a passkey to allow the connection to work properly. If a

passkey is requested, enter 0000.

Once paired, the following panel appears showing the status of Paired.

9. Press the Set button to complete the connection configuration:

MAAT 2.0 – User Guide

10. In the Device Name enter a name that allows you to unequivocally identify the connected device

in case you have a team with more drivers and devices (eg Moto 2 Luke).

11. Type the name of the Vehicle (eg RSV4).

12. Type the name of the Driver (eg Luke).

13. Leave the COM port setting to Automatic.

14. Confirm with the OK button.

15. By this moment the communication with your Device has been configured and it will be selectable

in the Connection To drop down menu:

MAAT 2.0 – User Guide

16. Clicking on the icon It will always be possible to see the list of configured devices and

modify the configuration or remove them from the list:

17. The Test Connection button allows you to check the correct communication with the selected

device and to receive its serial number.

Attention: if, after having carried out the connection test, an error message is received, but you

are sure that the device is switched on and in connection range, check if it’s necessary to redo the

pairing using a passkey as indicated in step 8 above.

Connection to PC with Windows 7

To activate the communication between the PC:

1. Make sure your PC is equipped with Bluetooth functionality or buy a USB-Bluetooth

dongle.

2. Power on CORSARO and keep it not more than 2 metres from the PC.

3. If your CORSARO comes with firmware version higher than 1.82, enter the Bluetooth

menu on CORSARO and

activate the discoverability for 1 minute trough the “Discoverability” feature:

Menu: BLUETOOTH > BLUETOOTH DISCOVERABILITY

MAAT 2.0 – User Guide

4. Click on the Bluetooth icon in the Windows® notification area and select the "Add a

Bluetooth Device" item to start searching for visible Bluetooth

devices.

5. From Add Bluetooth Device Wizard window select the checkbox "My device is set up and

ready to be found" and click on the "Next" button to search for any Bluetooth device in

the proximity.

6. A new device will be found. It is specified by an abbreviation corresponding to the unique

code (device address, e.g.: 00:04:3E:25:ab:14) of your CORSARO. The name

STARLANE_CORSARO will appear on the display after some seconds.

If no device is found out, try powering off and on CORSARO and click on the button

"Search Again".

7. Select the device and click on the "Next" button.

MAAT 2.0 – User Guide

8. In case you PC should require a passkey, digit 0000 as a passkey.

9. If the pairing has been successfully done, the (serial) COM ports in use for the

communication between the PC and the CORSARO device appear on the display.

Therefore the port that you’ll have to set in the Communication menu of

MAAT software is the one named "Outgoing COM port"

(COM8 in the example represented by the figure).

Click on the button "Finish" to quit the pairing procedure.

If the list of the COM ports assigned to the device is not displayed, you can see it by clicking on

the device properties in the Bluetooth panel of your PC.

Carry out now the procedure described in the previous paragraph but without carrying out

point 3 and, at point 12, set the outgoing COM port that you have just detected instead of

the Automatic one.

MAAT 2.0 – User Guide

CONNECTION OF DAVINCI-II VIA USB CABLE

At the first connection it is necessary to configure your DaVinci-II so that, every time the USB cable is

connected, MAAT can recognize it and automatically set the name of the driver and device for data

download or settings.

First connection

1. Verify MAAT is running.

2. Turn on the DaVinci-II by powering it from the vehicle key.

3. Connect the USB cable of DaVinci-II to the PC.

4. After a few seconds the following message will automatically appear:

5. In the lower right corner of the screen will appear some Windows notification boxes indicating

possible problems with the unit and with the request to correct them, completely ignore these

messages and not give any confirmation of correction.

6. Click on the SET button, the following panel will open:

MAAT 2.0 – User Guide

7. In the Device Name enter a name that will allow you to unequivocally identify the connected

DaVinci-II in case you have a team with more drivers and devices (eg Moto 1 Luke).

8. Type the name of the Vehicle (Eg RSV4).

9. Type the name of the Driver (es. Luke).

10. Confirm by the OK button.

11. By this moment the communication with your DaVinci-II has been configured and the device

will be identified automatically at each connection of the USB cable as indicated in the Icon

Bar:

12. Clicking on the icon It will always be possible to see the list of configured devices and

modify the configuration or remove them from the list:

MAAT 2.0 – User Guide

13. The Test Connection button allows you to check the correct communication with the selected

device and to receive the serial number.

Note: connecting via USB cable does not use COM ports so it is correct that

the COM port in the panel is shown as Not Available.

MAAT 2.0 – User Guide

DATA DOWNLOAD

How to download data from STEALTH GPS-4, CORSARO and DAVINCI-II

1. 1. In case of Stealth, insert the USB Pendrive with the downloaded sessions into the PC.If you are

connecting DaVinci-II with a USB cable, the device will be recognized and selected automatically.

In the case of a Bluetooth connection, select the device in the Connection To drop down menu (if

previously defined) to which MAAT will connect for all data transmission and reception functions.

If you are connecting with a USB cable, the device will be recognized and selected automatically.

2. Click on the icon to open the Data Download panel.

3. Fill in the fields in the Data Download panel with all the information in the session:

EVENT

Name of the event (eg: the name of the competition)

SESSION

Name of the specific session (eg: Free, Timed, Morning, Afternoon, etc.)

DRIVER

Driver name (field already compiled obligatory when the device has been set)

VEHICLE

Eg: Moto1, Moto2, HONDA, YAMAHA etc. (field already compiled compulsorily

when the device has been set)

CIRCUIT

Name of the circuit selectable from the list or can be entered

RUN

Run number in the same session.

It is not mandatory to fill in the field as the value is automatically increased.

MAAT 2.0 – User Guide

NOTE: For the best Bluetooth signal quality, especially during data download, it is recommended

to keep the PC within 1 meter from the device.

4. If the list of available sessions on the device is empty, press the Update Session List button: in the

field above the session list.

5. Select the session, or sessions, that you want to download by referring to the Date and Time

values indicated in the name of the sessions.

6. Click on the Download button to download the data relating to the selected sessions to a

computer. A new line with the references of each of the sessions just downloaded is automatically

added to the Sessions Archive .

7. After downloading data, click on the Close button to return to the main window.

Only for STEALTH GPS-3/4

The data download procedure must be executed with the USB Pendrive inserted into the PC

after exporting on it the desired sessions as explained on the Stealth GPS-3/4 operation manual

at the “Data download”, paragraph in the “EXTERNAL USB MEMORY MANAGEMENT” chapter.

Leht laadib ...

Starlane MAAT 2.0 Kasutusjuhend

Bränd: Starlane

Mudel: MAAT 2.0

Tüüp: Kasutusjuhend

Laadige alla PDF

aruanne

teistes keeltes

English: Starlane MAAT 2.0 User manual

Starlane MAAT 2.0 Kasutusjuhend

Starlane MAAT 2.0 Kasutusjuhend

teistes keeltes

Muud dokumendid