Genovation ControlPad CP48 Getting Started

Bränd
Genovation
Mudel
ControlPad CP48
Tüüp
Getting Started
Getting Started
Programming the ControlPad CP48
Release 1.0
This tutorial assumes that you have already installed the MacroMaster software onto
your Windows operating system PC and you have the ControlPad CP48-USB plugged
into a USB port.
If you need more detailed instructions, please read
the MacroMaster PDF User Guide.
Run the MacroMasterCPxx program
Step # 1: Run the MacroMaster program.
MacroMaster is used to create, save, and download your key macros to
the ControlPad CP48-USB.
• Click on "Start"
• Click on "Programs"
• Click on "Genovation"
• Click on "MacroMaster CPxx"
• Click to run "MacroMasterCPxx"
The MacroMasterCPxx.exe application looks like this.
Step # 2: Select the CP48-USB key(s) you want to program.
Use your mouse to click on the key you want to program. The CP48-
USB buttons are located on the top/left corner of the MacroMaster
program.
Step # 3: Create the macro(s).
Enter the keyboard keystrokes that you want to record into the
selected macro location. There are two ways to enter keystrokes.
• Use your mouse to click on the keys you want to record. Use the
keyboard graphic which is located on the bottom of the
MacroMaster Program. This will automatically insert each key
selected into the grid.
• Use your standard keyboard which is already attached to your
PC to type in the keystrokes. Only the green colored keys are
available from your keyboard directly for keyboard to keyboard
programming. The other keys will have to be entered using your
mouse.
Step # 4: Save the macro definitions to a file.
• Click on the "Save as" button.
• Type in a filename and click on "Save".
Step # 5: Download the macro definitions to the ControlPad CP48-
USB.
• Click on the "Download" button. This will download the macro
definitions from the filename you last saved. The download
utility will automatically detect if the Controlpad CP48-USB is
plugged into the USB port and begin to download. Once
complete, the Controlpad CP48-USB will be reset by the
download program and you will notice the LED flash several
times during this reset process, please wait for the reset to finish
before typing on the keys.
Step # 6: Test your macros.
• Click on the "Test" Button. A key testing window will open and
you can test your key macros.
• Now you can test your key macros in your application program.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Genovation ControlPad CP48 Getting Started

Bränd
Genovation
Mudel
ControlPad CP48
Tüüp
Getting Started
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid