Legrand DST 2007 Setup for Automation Appliance Kasutusjuhend

AA-BASE Automation Appliance

Instructions for Using New DST Transition Dates

The AA-BASE firmware is designed to transition in and out of DST automatically based

on the pre-2007 scheme of DST beginning on the first Sunday in April and ending on the

last Sunday in October. Since these are no longer the correct dates, it will be necessary

for you to disable the automatic transition feature in your clock and manually change the

system time twice each year. Follow the link for information on making this change.

Procedure to disable the automatic DST transition:

From the Home page, click on Setup, then click on Time and Date

Use the pull down to select the appropriate time zone without DST. These are:

Eastern SystemV/EST5 (-5)

Central SystemV/CST6 (-6)

Mountain SystemV/MST7 (-7)

Pacific SystemV/PST8 (-8)

Alaska SystemV/YST9 (-9)

The example below is for Eastern time zone without DST.

Once the AA-BASE has been configured to not

transition to and from DST on the old

dates, it will be necessary to manually re-set the system clock like you do at home. Set

the clock back one hour on or just before the second Sunday in March (March 11, 2007)

and ahead one hour on or just before the first Sunday in November (November 4, 2007).

Procedure to reset the system clock:

Follow the above procedure to reach the Time and Date page

Use the pull down to select the new hour.

Click the Save button to save the change.

See juhend sobib ka

Laadige alla PDF