Bose ® Solo 15 Series II TV sound system Omaniku manuaal

Bränd: Bose

Mudel: ® Solo 15 Series II TV sound system

Kategooria: Blu-Ray mängijad

Tüüp: Omaniku manuaal

Bose

Solo 15/10 series II

TV sound system

Owner’s Guide • Brugervejledning • Bedienungsanleitung • Gebruikershandleiding

Guía del usuario • Käyttöohje • Notice d’utilisation • Manuale di istruzioni • Kezelési útmutató

Brukerveiledning • Podręcznik użytkownika • Manual do proprietário • Bruksanvisning

2 - English

Regulatory InformationImportant Safety Instructions

Please read this owner’s guide carefully and save it for

future reference.

The lightning ﬂash with arrowhead symbol within an equilateral triangle

alerts the user to the presence of uninsulated, dangerous voltage within

the system enclosure that may be of sufﬁcient magnitude to constitute a

risk of electrical shock.

The exclamation point within an equilateral triangle, as marked on the

system, is intended to alert the user to the presence of important

operating and maintenance instructions in this owner’s guide.

WARNINGS:

• To reduce the risk of ﬁre or electric shock, do not expose this product to

rain or moisture.

• Do not expose this apparatus to dripping or splashing, and do not place

objects ﬁlled with liquids, such as vases, on or near the apparatus. As

with any electronic products, use care not to spill liquids into any part of

the product. Exposure to liquids may create a failure and/or ﬁre hazard.

• Do not place naked ﬂame sources, such as lighted candles, on or near

the product.

• Do not allow children to push, pull, or climb on an A/V monitor. This may

cause it to tip over, possibly resulting in personal injury or death. For

added safety and stability, be sure to secure the monitor using a suitable

anti-tip device.

• Never place the equipment in an unstable location. The equipment may

fall, causing serious personal injury or death. Many injuries, particularly

to children, can be avoided by taking simple precautions such as:

– Using cabinets or stands recommended by the manufacturer of

the equipment.

– Only using furniture that can safely support the equipment.

– Ensuring the equipment is not overhanging the edge of the supporting

furniture.

– Not placing the equipment on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the equipment to

a suitable support.

– Not standing the equipment on cloth or other materials placed between

the equipment and supporting furniture.

– Educating children about the dangers of climbing on furniture to reach

the equipment or its controls.

– If you doubt your ability to safely mount this product, contact a

professional installer for help.

WARNINGS:

• Solo 10 series II system remote: Do not ingest battery, chemical burn

hazard.

The remote control supplied with this product contains a coin/button cell

battery. If the coin/button cell battery is swallowed it can cause severe

internal burns in just two hours and can lead to death. Keep new and

used batteries away from children. If the battery compartment does not

close securely, stop using the product and keep it away from children. If

you think the battery may have been swallowed or placed inside any part

of the body, seek immediate medical attention. The coin/button cell bat-

tery may explode or cause a ﬁre or chemical burn if incorrectly

replaced or mishandled. Do not recharge, disassemble, heat above

212°F (100°C) or incinerate. Replace only with an agency approved

(ex. UL) CR2032 or DL2032 3-volt lithium battery. Dispose of used

batteries promptly.

• Solo 15 series II system remote: Do not dismantle, open or shred bat-

tery pack or cells. Do not expose batteries or a battery pack to heat or

ﬁre. Avoid storage in direct sunlight. Do not short-circuit battery. Do not

store batteries carelessly in a box or drawer where they may short-circuit

each other or be short-circuited by other metal objects. Do not remove a

battery from its original packaging until required for use. Do not subject

batteries to mechanical shock. In the event of a battery leaking, do not

allow the liquid to come in contact with the skin or eyes. If contact has

been made, wash the affected area with copious amounts of water and

seek medical advice. Observe the plus (+) and minus (-) marks on the

battery and equipment and ensure correct use. Do not use any battery

pack or cell which is not designed for use with the product. Keep bat-

teries out of the reach of children. Seek medical advice immediately if

a battery has been swallowed. Always purchase the correct battery for

the equipment. Keep batteries clean and dry. Wipe the battery terminals

with a clean dry cloth if they become dirty. Use the battery only in the

application for which it was intended. When possible, remove the battery

from the equipment when not in use. Replace only with AA (IEC LR06)

alkaline batteries.

CAUTION: Do not make unauthorized alterations to the product; doing so

may compromise safety, regulatory compliance, system

performance, and may void the warranty.

WARNING:

This product contains magnetic material. Contact your

physician if you have questions on whether this might affect

the operation of your implantable medical device.

WARNING: Contains small parts which may be a choking hazard. Not

suitable for children under age 3.

NOTES:

• The product label is located on the bottom of the product.

• Where the mains plug or appliance coupler is used as the disconnect device,

such disconnect device shall remain readily operable.

• This product must be used indoors. It is neither designed nor tested for use

outdoors, in recreational vehicles, or on boats.

Bose Corporation hereby declares that this product is in compliance with

the essential requirements and other relevant provisions of Directive

1999/5/EC and all other applicable EU directive requirements. The

complete declaration of conformity can be found at:

www.Bose.com/compliance

Please dispose of used batteries properly, following local regulations.

Do not incinerate.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources, such as radiators, heat registers, stoves,

or other apparatus (including ampliﬁers) that produce heat.

9. Protect the power supply or cord from being walked on or pinched, particularly

at plugs, convenience receptacles, and the point where they exit from the

apparatus.

10. Only use attachments/accessories speciﬁed by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods

of time.

12. Refer all servicing to qualiﬁed service personnel. Servicing is required when

the apparatus has been damaged in any way: such as power supply or cord is

damaged; liquid has been spilled or objects have fallen into the apparatus; the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

This symbol means the product must not be discarded as household

waste, and should be delivered to an appropriate collection facility for

recycling. Proper disposal and recycling helps protect natural resources,

human health and the environment. For more information on disposal

and recycling of this product, contact your local municipality, disposal

service, or the shop where you bought this product.

English - 3

Regulatory Information

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could

void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules and Industry Canada

license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may

cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

CAN ICES-3 (B) / NMB-3 (B)

This device complies with FCC and Industry Canada RF radiation exposure limits

set forth for general population. It must not be co-located or be operating in

conjunction with any other antennas or transmitters.

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator and your body.

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices”

without permission granted by the NCC, any company, enterprise, or user is

not allowed to change frequency, enhance transmitting power or alter original

characteristic as well as performance to an approved low power radio-frequency

devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and

interfere legal communications; If found, the user shall cease operating imme-

diately until no interference is achieved. The said legal communications means

radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interfer-

ence from legal communications or ISM radio wave radiated devices.

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cad-

mium

(Cd)

Hexava-

lent

(CR(VI))

Polybromi-

nated Biphenyl

(PBB)

Polybro-

minated

diphenylether

(PBDE)

PCBs

O O O O O

Metal parts

O O O O O

Plastic parts O O O O O O

Speakers

O O O O O

Cables

O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part

is below the limit requirement of GB/T 26572.

X: Indicates that said hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

Please complete and retain for your records:

Serial numbers can be found on the bottom of the soundbar and on the

packaging for the remote control.

Remote serial number: _________________________________________________

System serial number: _________________________________________________

Purchase date: ________________________________________________________

We suggest you keep your receipt with this owner’s guide.

Date of manufacture: The ﬁrst bolded digit in the serial number indicates the

year of manufacture; “5” is 2005 or 2015.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,

No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend,

Taiwan Importer: Bose Taiwan Branch, Room 905, 9F, Worldwide House, 131

Min Sheng East Rd, Section 3, Taipei, Taiwan, 105

The Bluetooth

word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under

license.

Blu-ray Disc

™

and Blu-ray

™

are trademarks of the Blu-ray Disc Association.

Manufactured under license from Dolby Laboratories. Dolby and

the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

distributed, or otherwise used without prior written permission.

The N

etherlands

4 - English

Contents Introduction

Introduction

About your Solo 15/10 series II TV sound system .............................. 5

System features............................................................................... 5

Unpacking ................................................................................................. 5

Setting up the System

Placing the system .................................................................................. 6

Cable options ............................................................................................ 6

Connecting your TV ................................................................................. 6

Connecting the system .......................................................................... 7

Option 1: Optical cable (preferred) ................................................ 7

Option 2: Coaxial cable ................................................................... 7

Option 3: Analog cable ................................................................... 7

Connecting to power ............................................................................... 7

Placing your TV on the system.............................................................. 8

Sample system placement ............................................................ 8

Turning off your TV speakers ................................................................. 8

Powering on the system......................................................................... 8

Conﬁrming your TV speakers are off ............................................ 8

Using the System

Using the Solo 15 series II system universal remote ........................ 9

Programming the universal remote ........................................... 10

Customizing the power button ..................................................... 10

Switching between sources .......................................................... 10

Function buttons ............................................................................. 10

Using the Solo 10 series II system remote control ............................ 11

Switching between your TV and Bluetooth

device ................. 11

Optional Solo 15 series II system universal remote control ............ 12

Programming a non-Bose remote control .......................................... 12

Adjusting the volume ............................................................................. 12

Adjusting the bass level ......................................................................... 12

Resetting the bass level ................................................................. 12

Dialogue mode ......................................................................................... 12

Auto-wake ................................................................................................. 12

Bluetooth

Pairing a Bluetooth

device ................................................................... 13

Connecting to a paired Bluetooth

device .......................................... 13

Switching between connected devices ............................................... 13

Clearing the system’s Bluetooth

pairing list ..................................... 13

Getting System Information

System indicators.................................................................................... 14

Status indicator ............................................................................... 14

Bluetooth

indicator ....................................................................... 14

Alternate Setup

No sound from a source(s) connected to your TV ..................... 15

No optical, coaxial or analog connector on your TV .................. 15

Care and Maintenance

Troubleshooting ...................................................................................... 18

Replacing the remote batteries ............................................................ 19

Solo 15 series II system remote control ....................................... 19

Solo 10 series II system remote control ...................................... 19

Cleaning ..................................................................................................... 19

Customer service ..................................................................................... 19

Limited warranty ..................................................................................... 19

Technical Information ............................................................................. 19

English - 5

Introduction

About your Solo 15/10 series II

TV sound system

The Solo 15/10 series II system comes in two conﬁgurations:

• The Solo 15 series II system has a metal grille and a

programmable universal remote control.

• The Solo 10 series II system has a cloth grille and a

remote control.

System features

• Connects with just one audio cable for easy setup.

• Fits under most TVs 46" to 50" or can be placed on a shelf

directly below TV.

• Programmable universal remote powers on/off your TV,

cable/satellite box and system with the press of a single

button (Solo 15 series II system).

• Stream music from Bluetooth

devices.

• Stores up to eight Bluetooth devices in its pairing list.

• Connects up to two Bluetooth devices for easy

switching between devices.

• Delivers superb acoustic performance with an

unobstrusive design.

Unpacking

Carefully unpack the carton and conﬁrm that the following parts

are included:

Solo 15/10 series II TV sound system Power cord

Optical cable Coaxial cable

(Europe only)

3.5 mm audio cable

Solo 15 series II system

universal remote

(batteries provided)

OR Solo 10 series II

system remote

(battery installed)

May ship with multiple power cords. The appropriate power

cord for your region is supplied.

Note: If part of the system is damaged, do not use it. Contact your

authorized Bose

dealer or Bose customer service. Refer to

the contact sheet in the carton.

6 - English

Setting up the SystemSetting up the System

Placing the system

1. Move your TV so you can see the Audio Out panel.

2. Place the Solo 15/10 series II system where you had your TV.

Placement guidelines:

If placing the sound system in a cabinet or on a shelf, position the

front of the system as close as possible to the front edge of the

shelf for optimum audio performance.

CAUTIONS:

• If placing the sound system backed up to a wall, make sure there

is a space of at least 1" (2.5 cm) between the wall and the rear of

the system.

• With any placement of this product, make sure the ventilation

openings on the rear panel are not blocked.

Cable options

Connect your TV to the system using one of the three cable

options. The optical cable is the preferred method for connection.

Tip: If your TV does not have an optical, coaxial or analog

connector, see page 15.

1. On the back of your TV, locate the Audio OUT (digital)

connector panel.

Note: You must connect the audio cable through your Audio

OUT connector panel.

Option 1:

Optical (digital)

Preferred method

for connection.

Option 2:

Coaxial (digital)

Use if no optical

output is available.

Option 3:

Analog (stereo)

Use this connection if

no optical or coaxial

outputs are available.

Your TV's connector panel may not appear as shown.

Look for the shape (optical) or color of the connector.

2. Choose an audio cable.

Connecting your TV

Insert one end of the audio cable into the correct Audio OUT

(digital) connector on your TV.

CAUTION: If using an optical cable, remove the protective caps

from both ends. Inserting the plug in the wrong

orientation can damage the plug and/or the connector.

English - 7

Setting up the System

Connecting the system

After connecting the audio cable to your TV, connect the other end

to your system. Use only one audio cable.

Option 1: Optical cable (preferred)

CAUTION: Ensure you have removed the protective cap from

both ends of the optical cable. Inserting the plug in

the wrong orientation can damage the plug and/or

the connector.

1. Hold the optical cable’s plug with the Bose logo facing up.

2. Align the plug with the Optical connector on the system and

insert the plug carefully.

Hinged door

Note: The connector has a hinged door that swings inward

when inserting the plug.

3. Firmly push the plug into the connector until you hear or feel

a click.

Option 2: Coaxial cable

Insert the other end of the coaxial cable into the Coaxial connector

on the system.

Option 3: Analog cable

1. Insert the red plug into the R connector on the system.

2. Insert the white plug into the L connector on the system.

Connecting to power

1. Plug one end of the power cord into the Power connector.

2. Plug the other end into a live AC power (mains) outlet.

The system emits a tone.

Cable options

Connect your TV to the system using one of the three cable

options. The optical cable is the preferred method for connection.

Tip: If your TV does not have an optical, coaxial or analog

connector, see page 15.

1. On the back of your TV, locate the Audio OUT (digital)

connector panel.

Note: You must connect the audio cable through your Audio

OUT connector panel.

Option 1:

Optical (digital)

Preferred method

for connection.

Option 2:

Coaxial (digital)

Use if no optical

output is available.

Option 3:

Analog (stereo)

Use this connection if

no optical or coaxial

outputs are available.

Your TV's connector panel may not appear as shown.

Look for the shape (optical) or color of the connector.

2. Choose an audio cable.

Connecting your TV

Insert one end of the audio cable into the correct Audio OUT

(digital) connector on your TV.

CAUTION: If using an optical cable, remove the protective caps

from both ends. Inserting the plug in the wrong

orientation can damage the plug and/or the connector.

8 - English

Using the SystemSetting up the System

Placing your TV on the system

Lift your TV and place it on top of the system. Follow these

guidelines:

• The Bose Solo 15/10 series II system is designed to ﬁt under TVs

that weigh no more than 75 lbs (34 kg) and have bases no wider

than 24" (61 cm), and no deeper than 12.25" (31 cm).

• The base of your TV should be centered on the top of the system

and must not hang over any of its edges.

• If the TV base is too large to ﬁt on top of the system, place the

sound system in another location such as on an open shelf under

the TV, but keep it close to your TV so the audio cable will reach.

You can also mount your TV on the wall above the system.

CAUTIONS:

• DO NOT place a CRT type TV on this system. It is not designed

for use with this type of TV.

• Allowing the base of your TV to hang over any edge of this

speaker system increases the risk of the TV tipping, which may

result in injury.

• If your TV comes with an anti-tip device, install it according to the

manufacturer’s instructions and adjust the tether as instructed

after placing the TV on top of the system. Installing an anti-tip

device is recommended when using a TV with this product. If

your TV did not come with an anti-tip device, you can get one

from most retail TV suppliers.

To avoid wireless interference:

• Keep other wireless equipment away from the system.

• Place the system outside of and away from metal cabinets, other

audio/video components and direct heat sources.

Sample system placement

Turning off your TV speakers

To avoid hearing distorted sound, turn off your TV speakers.

Refer to your TV’s owner’s guide for more information.

Powering on the system

1. Power on your TV.

2. If you are using a cable/satellite box or other secondary

source, power on the source.

3. Press the Power button (

) on the remote control.

The status indicator glows green.

Status indicator

4. Check if sound is coming from the system.

Note: If you do not hear sound coming from the system, see

“Troubleshooting” on page 18.

Conﬁrming your TV speakers are off

1. Press the Mute button ( ) on the remote.

2. Check that no sound is coming from your TV.

Note: If you hear sound coming from your TV, see

“Troubleshooting” on page 18.

English - 9

Using the System

Using the Solo 15 series II system universal remote

Use the remote to control sources connected to the system, adjust the system volume, change channels, use playback functions and enable

cable/satellite box functions.

Navigation pad

Source selection

Lists recorded DVR

programs

Closed captioning

Selects a source

connected to

your TV

Function buttons

(see page 10)

Bass controls

(see page 12)

Playback controls

Powers on/off the soundbar and

controls auto-wake (see page 12)

Powers on/off a selected source

Previous channel, chapter or track

Teletext mode

Volume controls

(see page 12)

Dialogue mode

(see page 12)

controls the Bluetooth

feature

(see page 13)

Displays the Internet TV

home page

10 - English

Using the SystemUsing the System

Programming the universal remote

You can program the universal remote to control your source, such

as a TV, DVD/Blu-ray Disc

™

player, cable/satellite box, game system

or DVR, by entering the code for your source’s brand. There may

be several codes for your source. You may need to perform this

procedure multiple times to locate the correct code.

Locate your source’s code

1. Power on your source.

2. Locate the code for your source’s brand in the Universal

Remote Device Codes book (provided).

Enter your source’s code

1. On the remote control, press and hold the appropriate source

button until all six source buttons glow, then release.

For example, to program your TV, press and hold

until

all six source buttons glow, then release.

The appropriate source button continues to glow.

2. On the number keypad, enter the code for your source’s brand

and press + on the volume button.

Test your source’s code

1. Test your source for basic functions. Follow the instructions for

your source:

• TV: press the channel buttons. Press

. The settings

menu appears. Press

and to navigate.

• Cable/satellite box: press

. The programming

guide appears. Press

and to navigate.

• DVD or Blu-ray Disc

™

player: press . The settings

menu appears. Press

and to navigate.

• Game system: press

and to navigate through

your menu.

2. Based on your source’s response to basic functions:

• Remote responds accurately: press

to exit

programming and save your settings.

• Remote does not respond or does not respond

accurately:

- If your source button glows: press + on the volume

button to move to the next code. Repeat steps 1-2 in

“Test your source’s code”. You may need to repeat this

procedure 30 or more times. If all six buttons blink three

times, you have cycled through all codes for your source.

- If your source button is off: your remote exited program-

ming mode. Repeat steps 1-2 in “Enter your source’s

code” and steps 1-2 in “Test your source’s code”.

Tip: After you exit programming mode, press the appropriate

source button to use your source.

Note: Your source may not be compatible with universal

remote controls. Refer to your source’s owner’s guide

for more information.

Customizing the power button

You can customize (power button) on your remote to power

on/off your system, TV and cable/satellite box simultaneously.

1. Program your remote to control your TV and cable/satellite box

(see “Programming the universal remote”).

2. Press

and simultaneously and hold for ten

seconds.

Both buttons ﬂash three times.

Resyncing your cable/satellite box and TV

After customizing the power button, your cable/satellite box and TV

may become out of sync and not power on/off simultaneously. Use

the following steps to resync the system.

1. Press the source button for the source that is out of sync.

2. Press

to power on/off the source.

3. Press

Your sources power on/off simultaneously.

Switching between sources

You can switch from one source to another by pressing the

appropriate source button on the remote. For information on

connecting to a paired Bluetooth

device, see page 13.

Note: Before you begin, ensure you have correctly programmed

your sources.

1. Press the button for the source you want to control.

The source button glows.

2. Press

The source powers on.

3. Press

and select the correct input on your TV.

Function buttons

The red, green, yellow and blue buttons on the remote control

correspond with the color-coded function buttons on your cable/

satellite box or teletext functions.

• Cable/satellite box functions: refer to your cable/satellite box’s

owner’s guide.

• Teletext functions: correspond with color-coded page numbers,

headings or shortcuts on a teletext display.

English - 11

Using the System

Using the Solo 10 series II system remote control

Use the remote to power on/off the system, adjust the volume and bass, use dialogue mode and control the Bluetooth

feature.

Powers on/off the

soundbar and

controls auto-wake

(see page 12)

BASS

Volume controls

(see page 12)

Switches audio from a Bluetooth device to

your TV

controls the Bluetooth

feature

(see page 13)

Bass controls

(see page 12)

Dialogue mode

(see page 12)

Switching between your TV and Bluetooth

device

You can switch between your TV and Bluetooth device(s) by pressing the appropriate source button on your remote control.

To switch to your TV, press the TV button (

To switch to your Bluetooth device(s), press the Bluetooth button (

For more information on streaming music from Bluetooth devices, see page 13.

12 - English

Bluetooth

Using the System

Optional Solo 15 series II system

universal remote control

Bose offers the Solo 15 series II system universal remote control for

separate purchase. Contact Bose Corporation or your local dealer

for more information. Refer to the contact sheet in the carton.

Programming a non-Bose

remote control

You can program a non-Bose remote control, such as your

cable/satellite box remote, to control the system. Refer to your

non-Bose remote control’s owner’s guide or cable/satellite website

for instructions.

Once programmed, the non-Bose remote performs basic functions

such as power on/off and volume.

Adjusting the volume

On the remote control:

• Press + to increase the volume.

• Press – to decrease the volume.

• Press

to mute or unmute the audio.

Note: If you hear sound coming from your TV, see “Troubleshoot-

ing” on page 18.

Adjusting the bass level

1. Press the Bass button ( ).

The status indicator blinks white three times.

2. On the remote control:

• Press

to increase the bass.

• Press

to decrease the bass.

3. Press the Bass button (

The status indicator blinks white three times and the system

saves your settings.

Note: For optimal sound quality for dialogue-only programs, such

as news and talk shows, see “Dialogue mode”.

Resetting the bass level

On the remote control, press and hold for ﬁve seconds to

reset the bass level to original factory settings.

Dialogue mode

Dialogue mode provides optimal sound quality for dialogue-only

programs, such as news and talk shows, by decreasing the

system’s bass settings.

On the remote control, press the dialogue button (

) to toggle

between dialogue mode and your default audio settings.

The status indicator glows amber when dialogue mode is enabled.

Auto-wake

You can set the system to power on whenever a sound signal

is received.

Note: The system powers off after 60 minutes of inactivity.

On the remote control, press and hold

for ﬁve seconds to toggle

between auto-wake and default power settings.

The status indicator glows dim amber when the system is off and

auto-wake is enabled.

English - 13

Bluetooth

Pairing a Bluetooth

device

Bluetooth

wireless technology enables you to stream music from

Bluetooth smartphones, tablets, computers or other audio devices

to the system.

Before you can stream music from a Bluetooth device, you must

pair your device with the system.

1. On the remote control, press and hold

until the Bluetooth

indicator blinks blue.

Make sure the Bluetooth indicator blinks blue before you pair

your device.

2. On your Bluetooth device, turn on the Bluetooth feature.

Tip: The Bluetooth feature is usually found in Settings. A gear

icon (

) often represents Settings on the Home screen.

3. Select Bose Solo system from your device list.

Once paired, Bose Solo system appears connected in

the device list. The system emits a tone and the Bluetooth

indicator glows white.

4. On your Bluetooth device, play music to stream to

the system.

If you cannot pair your device

You may need to clear the system’s Bluetooth pairing list (see

“Clearing the system’s Bluetooth pairing list”). After you clear the

list, try pairing again.

See “Troubleshooting” on page 18 for more information.

Connecting to a paired Bluetooth

device

You can stream audio from a Bluetooth

device to the system.

Note: If there are multiple devices stored in the system’s pairing

list, it may take a minute or two for the paired device to

connect. The system’s Bluetooth indicator shows connection

status (see page 14).

1. On the remote control, press

The system connects to the last two devices that streamed to

your system.

2. On the device, play music.

If you cannot stream audio from a paired device

The system may have lost connection to the device. Check the

system’s Bluetooth indicator. If the paired device is out of range of

the system, move the device within range.

Switching between connected

devices

The system supports multi-point connectivity, which allows you to

seamlessly switch playing music between connected devices.

The last two devices that streamed to the system remain connect-

ed. During playback, you can pause audio on the streaming device,

and then play music from another connected device.

1. Pause music from the streaming device.

2. On another connected device, play music.

3. Repeat steps 1 and 2 to switch between connected devices.

Clearing the system’s Bluetooth

pairing list

When you pair a Bluetooth

device to the system, the connection is

stored in the system’s pairing list. You may need to clear the pairing

list if you cannot connect to a device. Once you clear the list, you

need to pair the device again.

1. Press and hold

for 10 seconds, until the Bluetooth

indicator

blinks blue.

2. On your mobile device, delete Bose Solo system from the

Bluetooth menu.

The system emits a tone and is ready to pair a device

(see “Pairing a Bluetooth

device”).

14 - English

Getting System Information

System indicators

The status and Bluetooth

indicators on the front of the system provide information on system activity.

Bluetooth

indicator

Status indicator

Indicator activity System state

Off System off (standby)

Green Solid: System is on

Blinking: System is muted

Amber Dim: Standby, auto-wake is enabled

Solid: Dialogue mode

Blinking: Dialogue mode, system is muted

Red System error: Call Bose Customer Service. Refer to the contact sheet in the carton.

Bluetooth

indicator

Indicator activity System state

Blue Blinking: Ready to pair

White Blinking: Connecting

Solid: Connected

Alternate Setup

English - 15

Alternate Setup

You may need to use an alternate setup method for the following reasons:

• No sound from a source(s) connected to your TV

• No optical, coaxial or analog connector on your TV

No sound from a source(s) connected to your TV

Some TVs do not deliver sound from connected sources to the system. Use an alternate setup method to directly connect your source(s) to

the system.

Problem What to do

No sound from a source connected to your TV Connect your source to the system using one of the three cable options. (See page 16.)

No sound from two sources connected to your TV Connect your sources to the system using Option 1 or Option 2. (See page 16.)

No optical, coaxial or analog connector on your TV

Some TVs do not have optical, coaxial or analog connectors. Use an alternate setup method to connect your TV to the system.

Problem What to do

TV only has a headphones connector Connect your TV using a 3.5 mm stereo cable (not provided). (See page 17.)

TV has no audio outputs Use the audio outputs on another source, such as a cable/satellite box to connect to the

system. (See page 16.)

16 - English

Alternate SetupAlternate Setup

Connecting a source to the system

If you do not get sound from a source, such as a DVD/Blu-ray

Disc

™

player, cable/satellite box, game system or DVR connected

to your TV, connect it to the system.

CAUTION: If using an optical cable, remove the protective caps

from both ends. Inserting the plug in the wrong

orientation can damage the plug and/or the connector.

1. On the back of your cable/satellite box, locate the Audio Out

(digital) connector panel.

Audio OUT

Source connector

panel

System connector panel

2. Choose an audio cable.

3. Connect the audio cable from your cable/satellite box’s

Audio Out (digital) connector panel to the system.

Note: Do not disconnect your source’s video cable, such as an

HDMI

™

cable, from your TV.

Connecting two sources to the system

If you do not get sound from any sources, such as a DVD/Blu-ray

Disc

™

player, cable/satellite box, game system or DVR, connected

to your TV, connect it to the system. Use only one audio cable for

each source.

1. On the back of each source, locate the Audio Out (digital)

connector panel.

2. Choose a separate audio cable for each source using either

Option 1 or Option 2 (see page 17).

Note: You MUST use either Option 1 or Option 2. Do not use

the coaxial cable and optical cable at the same time.

3. Separately connect the chosen audio cable from each source’s

Audio Out (digital) connector panel to the system.

Note: Do not disconnect your source’s video cable, such as an

HDMI

™

cable, from your TV.

Option 1

This ﬁgure shows two source connections using an optical cable

and analog cable.

CAUTION: If using an optical cable, remove the protective caps

from both ends. Inserting the plug in the wrong

orientation can damage the plug and/or the connector.

Audio OUT

Source 2

Audio OUT

Source 1

System connector panel

English - 17

Alternate Setup

Option 2

This ﬁgure shows two source connections using a coaxial cable

and analog cable.

Audio OUT

Source 2

Audio OUT

Source 1

System connector panel

Using two sources connected to the system

Power off sources when not in use. In order for one source to

deliver audio to the system, your other source must be off.

Connecting a TV headphones connector to

the system

If your TV only has a headphones connector, use a 3.5 mm to RCA

stereo cable (not provided) to connect to the system.

1. Insert the stereo plug into the TV headphones connector.

2. Insert the red plug into the R connector on the system.

3. Insert the white plug into the L connector on the system.

4. Ensure your TV speakers are on. Refer to your TV’s owner’s

guide for more information.

5. To ensure optimal volume control from the system,

• Set your TV’s volume to 75 percent of maximum.

• Next, set the volume level of the system using the

remote control.

System connector panel

Audio OUT

TV headphones connector panel

(or other variable audio output)

3.5 mm Stereo cable

(not provided)

18 - English

Care and MaintenanceCare and Maintenance

Troubleshooting

Problem What to do

No power • Secure both ends of the power cord.

• Plug the power cord into a live AC (mains) outlet.

• Unplug the power cord for at least one minute and reconnect.

No audio • Unmute the system.

• Increase the volume.

• Plug the audio cable into a connector on your TV labelled Audio Output or Audio OUT, not Audio Input or Audio IN.

• Use only one audio cable.

• Secure all cable connections and ensure they are correct.

• Select the correct TV input.

• Enable your TV’s audio output and select the correct setting, such as such as Stereo or 5.1 Channel Audio. Refer to

your TV’s owner’s guide for more information.

• Use alternate setup (see page 15).

• If connecting to two sources:

– Power off the other source.

– Ensure that you are not using an optical cable and coaxial cable.

• If the system is connected to a TV output labelled VARIABLE (VAR), power off your TV speakers, set your TV volume to

75 percent of maximum and unmute your TV.

• If connecting through a TV headphones output, increase your TV volume to the maximum limit.

• Unplug the power cord for at least one minute and reconnect.

Cannot play

Bluetooth

audio

• On the system:

– Pair a device (see page 13).

– Clear the system’s pairing list (see page 13).

– Try pairing a different device.

• On your Bluetooth device:

– Turn off and on the Bluetooth feature.

– Remove the system from the Bluetooth

menu. Pair again.

– Use a different music source.

– Check your Bluetooth device for compatibility. Refer to your Bluetooth device’s owner’s guide.

• Increase the volume on the system, your mobile device and music source.

• Ensure you are using the correct device.

• If multiple Bluetooth devices are connected, pause your streaming device ﬁrst.

• Disconnect other Bluetooth devices when not in use.

• See “No audio” or “Distorted Audio”.

Distorted audio

• Secure cable connections on the system and TV (or other connected sources).

• If the system is connected to a TV output labelled VARIABLE (VAR), reduce the TV volume.

• Use alternate setup (see page 15).

• Unplug the power cord for at least one minute and reconnect.

Remote control is inconsistent or

does not work

• Check the batteries to see if they are installed properly or if they need to be replaced (see page 19).

• Point the remote control directly at the system.

• Check that the status indicator ﬂashes when you press the remote volume or mute button.

• Unplug the power cord for at least one minute and reconnect.

Sound is coming from the TV

• Turn off your TV speakers (see page 8).

• Mute or decrease the volume your TV.

Status indicator is red

• System error: Call Bose Customer Service. Refer to the contact sheet in the carton.

English - 19

Care and Maintenance

Replacing the remote batteries

Solo 15 series II system remote control

Replace both batteries when the remote control stops operating or

its range seems reduced. Use Alkaline batteries.

1. Slide open the battery compartment cover on the back of

the remote.

2. Remove both batteries.

Dispose of the batteries according to the regulations in

your area.

3. Insert two AA (IEC-LR6) 1.5V batteries or the equivalent. Match

the + and – symbols on the batteries with the + and – markings

inside the compartment.

4. Slide the battery compartment cover back into place.

Solo 10 series II system remote control

Replace the battery when the remote control stops operating or its

range seems reduced. Use a lithium battery.

1. Using a coin, turn the battery cover slightly left.

2. Remove the cover and insert the new battery (CR2032 or

DL2032) ﬂat side up, with the plus (+) symbol in view.

3. Reseat the cover and turn it right to lock into place.

WARNING: Do not ingest battery, chemical burn hazard.

The remote control supplied with this product contains a

coin/button cell battery. If the coin/button cell battery is

swallowed it can cause severe internal burns in just two

hours and can lead to death. Keep new and used batteries

away from children. If the battery compartment does not

close securely, stop using the product and keep it away from

children. If you think the battery may have been swallowed or

placed inside any part of the body, seek immediate medical

attention. The coin/button cell battery may explode or cause

a ﬁre or chemical burn if incorrectly replaced or mishandled.

Do not recharge, disassemble, heat above 212°F (100°C) or

incinerate. Replace only with an agency approved (ex. UL)

CR2032 or DL2032 3-volt lithium battery. Dispose of used

batteries promptly.

Cleaning

• Clean the surface of the system with a soft, dry cloth.

• Do not use any sprays near the system. Do not use any solvents,

chemicals, or cleaning solutions containing alcohol, ammonia or

abrasives.

• Do not allow liquids to spill into any openings.

Customer service

For additional help, contact Bose Customer Service. Refer to the

contact sheet in the carton.

Limited warranty

Your system is covered by a limited warranty. Details of the limited

warranty are provided on the product registration card in the

carton. Please refer to the product registration card for instructions

on how to register. Failure to register will not affect your limited

warranty rights.

The warranty information provided with this product does

not apply in Australia or New Zealand. See our website at

www.bose.com.au/warranty or www.bose.co.nz/warranty for

details of the Australia and New Zealand warranty.

Technical Information

Power rating

100-240V

50/60 Hz 50W

2 - Dansk

Oplysninger om reglerVigtige sikkerhedsinstruktioner

Læs venligst denne brugervejledning omhygeligt,

oggem den, så du har adgang til den senere.

Et lyn med pilehoved i en ligebenet trekant med gør brugeren opmærksom

på, at der i systemets kabinet kan være uisoleret farlig spænding, der kan

være så kraftig, at der er risiko for elektrisk stød.

Mærket med et udråbstegn i en ligesidet trekant skal gøre brugeren

opmærksom på vigtige betjenings- og vedligeholdelsesinstruktioner i

denne brugervejledning.

ADVARSLER:

• Systemet må ikke udsættes for regn eller fugt af hensyn til risikoen for

brand eller elektrisk stød.

• Udsæt ikke dette apparat for dryp eller stænk, og placer ikke genstande,

der er fyldt med væske, på eller nær ved apparatet. Som det gælder for

alle elektriske apparater skal du passe på ikke at spilde væske på nogen

dele af produktet. Hvis produktet udsættes for væske, kan det medføre

fejl og/eller risiko for brand.

• Placer ikke nogen form for åben ild (f.eks. stearinlys) på eller tæt ved

apparatet.

• Lad ikke børnene skubbe til, trække i eller klatre på en skærm. Dette

kan få den til at vælte, hvilket kan forårsage personskade eller dødsfald.

Sikkerheden og stabiliteten kan øges ved at fastgøre skærmen ved hjælp

af en egnet anti-vippe enhed.

• Placer aldrig udstyret på et ustabilt underlag. Udstyret kan falde ned

og forårsage alvorlig personskade eller dødsfald. Mange personskader

(især dem, der rammer børn) kan undgås ved at tage nogle enkle

forholdsregler som f.eks.:

– Brug de kabinetter eller stativer, som anbefales af producenten af udstyret.

– Brug kun møbler, som uden problemer kan bære udstyret.

– Sørg for, at udstyret er placeret helt inde på det møbel, som det står på.

– Undgå at placere udstyret på høje møbler (for eksempel skabe eller

reoler) uden at forankre både møblet og udstyret til en væg på en

passende måde.

– Undgå at placere udstyret på stof eller andre materialer, som placeres

mellem udstyret og det møbel, som udstyret står på.

– Fortæl børnene om, hvor farligt det er at klatre på møblerne for at nå

udstyret eller knapperne på udstyret.

– Hvis du ikke er sikker på, at du selv kan montere dette produkt på en

sikker måde, skal du få en professionel installatør til at hjælpe dig.

ADVARSLER:

• Fjernbetjening til Solo 10 series II system: Undgå at sluge batteriet –

fare for kemiske forbrændinger.

Den fjernbetjening, der følger med dette produkt, indeholder et mønt-/

knapcellebatteri. Hvis mønt-/knapcellebatteriet sluges, kan det

forårsage alvorlige indre forbrændinger på blot to timer, hvilken kan

være livsfarligt. Opbevar nye og brugte batterier utilgængeligt for børn.

Hvis batterirummet ikke lukker ordentligt, skal du ophøre med at bruge

produktet og opbevare det utilgængeligt for børn. Hvis du har mistanke

om, at batteriet kan være blevet slugt eller er kommet ind et andet

sted i kroppen, skal du straks søge læge. Mønt-/knapcellebatteriet

kan eksplodere eller forårsage brand eller kemiske forbrændinger,

hvis det ikke udskiftes korrekt, eller hvis det håndteres forkert. Undlad

at genoplade batteriet, skille det ad, opvarme det til over 100° C eller

brænde det. Må kun udskiftes med et institutgodkendt (f.eks. UL) CR2032

eller DL2032 3-volt litiumbatteri. Bortskaf brugte batterier omgående.

• Fjernbetjening til Solo 15 series II system: Undlad at åbne, flænse

eller på anden måde skille batteriet eller cellerne ad. Undlad at udsætte

batterierne for varme eller ild. Undgå opbevaring i direkte sollys. Undlad

at kortslutte batteriet. Undgå at opbevare batterierne løst i en æske

eller en skuffe, hvor de kan kortslutte hinanden eller blive kortsluttet

af andre metalgenstande. Fjern ikke et batteri fra den oprindelige

emballage, før det skal bruges. Udsæt ikke batterierne for mekaniske

stød. Hvis et batteri lækker, må du ikke lade væsken komme i kontakt

med huden eller øjnene. Hvis det sker, skal det berørte område vaskes

med rigelige mængder vand, og der skal søges lægehjælp. Find plus- (+)

og minusmærkerne (-) på batteriet og udstyret, og sørg for, at batteriet

anvendes korrekt. Brug ikke batterier eller celler, som ikke er designet

til brug sammen med produktet. Opbevar batterierne utilgængeligt for

børn. Søg læge med det samme, hvis et batteri er blevet slugt. Køb

altid det korrekte batteri til udstyret. Hold batterierne rene og tørre.

Tør batterikontakterne af med en ren, tør klud, hvis de bliver snavsede.

Brug kun batteriet til det formål, som det er beregnet til. Fjern om muligt

batteriet fra udstyret, når det ikke er i brug. Må kun udskiftes med AA-

alkalinebatterier (IEC LR06).

FORSIGTIG! Foretag ikke nogen uautoriserede ændringer af produktet.

Dette kan kompromittere sikkerheden, regeloverholdelsen og

systemets ydeevne og kan medføre, at garantien bortfalder.

ADVARSEL:

Dette produkt indeholder magnetisk materiale. Kontakt din

læge, hvis du er i tvivl om, hvorvidt dette kan påvirke din

implanterbare medicinske enheds funktion.

ADVARSEL: Indeholder små dele, som kan udgøre en kvælningsfare.

Egner sig ikke til børn under 3 år.

NOTER:

• Produktmærkaten er placeret i bunden af produktet.

• Hvis netstikket eller stikdåsen anvendes som afbryder, skal denne afbryder

være let at komme til.

• Dette produkt skal anvendes inden døre. Det er hverken designet eller testet til

udendørs brug i fritidskøretøjer eller i lystbåde.

Bose Corporation erklærer hermed, at dette produkt stemmer overens

med de væsentlige krav og andre relevante bestemmelser i direktiv

1999/5/EF og alle andre relevante krav i EU-direktiver. Den fulde

overensstemmelseserklæring kan findes på www.Bose.com/compliance

Bortskaf brugte batterier i henhold til lokale bestemmelser. Batterier må

ikke brændes.

Vigtige sikkerhedsinstruktioner

1. Læs disse instruktioner.

2. Gem disse instruktioner.

3. Ret dig efter alle advarsler.

4. Følg alle instruktioner.

5. Anvend ikke dette apparat i nærheden af vand.

6. Rengør kun med en tør klud.

7. Undgå at blokere ventilationsåbningerne. Installer i overensstemmelse med

producentens instruktioner.

8. Installer ikke produktet i nærheden af varmekilder som f.eks. radiatorer,

varmeovne, komfurer eller andre apparater (herunder forstærkere),

der producerer varme.

9. Beskyt strømforsyningen eller netledningen mod at blive trådt på eller klemt,

specielt ved stikket, stikkontakter, og hvor den kommer ud af udstyret.

10. Brug kun tilslutningsudstyr/tilbehør, der er angivet af producenten.

11. Afbryd strømmen til apparatet under tordenvejr, eller når det står ubrugt i

lang tid.

12. Overlad al servicering til kvalificeret servicepersonale. Et serviceeftersyn

er påkrævet, når apparatet på nogen måde er beskadiget, hvis f.eks.

strømforsyningen eller netledningen er beskadiget, der er blevet spildt

væske, eller der er kommet objekter ind i apparatet, hvis apparatet er blevet

udsat for regn eller fugt, ikke virker normalt eller er blevet tabt.

Dette symbol betyder, at produktet ikke må smides ud som

husholdningsaffald og bør indleveres til en passende indsamlingsordning

med henblik på genanvendelse. Korrekt bortskaffelse og genanvendelse

bidrager til at beskyttelse naturressourcer, menneskets sundhed og

miljøet. Hvis du ønsker flere oplysninger om bortskaffelse og

genanvendelse af dette produkt, kan du kontakte din kommune,

dit renovationsselskab eller den butik, hvor du har købt dette produkt.

Leht laadib ...

Bose ® Solo 15 Series II TV sound system Omaniku manuaal

Bränd: Bose

Mudel: ® Solo 15 Series II TV sound system

Kategooria: Blu-Ray mängijad

Tüüp: Omaniku manuaal

Laadige alla PDF

aruanne

teistes keeltes

polski: Bose ® Solo 15 Series II TV sound system Instrukcja obsługi
Deutsch: Bose ® Solo 15 Series II TV sound system Bedienungsanleitung
italiano: Bose ® Solo 15 Series II TV sound system Manuale del proprietario
español: Bose ® Solo 15 Series II TV sound system El manual del propietario
svenska: Bose ® Solo 15 Series II TV sound system Bruksanvisning
português: Bose ® Solo 15 Series II TV sound system Manual do proprietário
français: Bose ® Solo 15 Series II TV sound system Le manuel du propriétaire
dansk: Bose ® Solo 15 Series II TV sound system Brugervejledning
Nederlands: Bose ® Solo 15 Series II TV sound system de handleiding

Bose ® Solo 15 Series II TV sound system Omaniku manuaal

Bose ® Solo 15 Series II TV sound system Omaniku manuaal

teistes keeltes

Seotud paberid

Muud dokumendid