LINE LASER LEVEL
RH-9501
USER MANUAL 1
SPECIFACATION
Model RH-9501
Accuracy of V&H line ± 2 mm@ 5m
Leveling Range ± 3°
Working Range/With Detector 10m/ 50m with detector
Tripod Thread 1/4"
Laser Type 635 nm, laser class II
Resistance to Water and Dust (IP54)
Operating Temperature ‐10 ℃to 50℃
Dimension 65×65×65 mm3
Continuous Working Time
All Diodes
≥ 8hour
Power Supply 3×AAA Alkaline batteries
Net Weight 230gr
Supplied in Pouch bag
Includes Wall mount, 2 × AAA batteries
PARTS LIST
without automatic
leveling mood /
Puls mood
Horizental Line/
Vertical Line
Magnetic Bracket
Off/On Lock Switch
Bolt
LINE LASER LEVEL
2
Please read this instruction manual before first use.
.WHAT IS INCLUDED WITH YOUR RED BEAM
1- Instrument
2- Magnetic bracket and wall bracket
3- Alkaline batteries
4- User manual
5- Carry Case
OPERATING THE UNIT
.PENDULUM LOCK
The 1V1H Red beam laser level is a precision instrument and should be
treated with care. When not in use, the pendulum should always be in
the Off position. Locking the pendulum allows the Cross Line Laser to
better withstand vibration and trauma incurred during transportation or
if the unit is dropped.
Off/On Lock Switch
.LOCKED LINE ANGLE
In the locked line angel position, the pendulum is in the locked position
and will not automatically level. When in the locked line position, both
two laser lines will be on and flash slowly. The Red Lock LED will be on
as well.
without automatic
leveling mood
.AUTOMATIC LEVELING
When the pendulum is free to automatically level, In order for the Cross
Line Laser to automatically level, the base of the unit needs to be within
USER MANUAL 3
3˚ of level.
When the pendulum is unlocked and the Cross Line Laser is within 3˚ of
level, the unit will be in automatic leveling range, in this situation no LED
light will be on. Should the base of the unit be outside the 3˚ leveling
range the laser beam will flash meanwhile an audibly warning will be
sent out from Cross Line Laser.
.LOW BATTERY ALARM
The Green battery LED will be on and keep flashing slowly when the
working voltage of laser is below 3V. At this situation the batteries are
required to be replaced.
-
1
-
2
-
3
-
4
-
5
-
6
