Kygo A9/600 Kasutusjuhend

Tüüp
Kasutusjuhend
Headphones
Kygo A9/600
USER GUIDE
2
3
I am known for my music. It is my passion. Behind it is a
craftsmanship - the drive to keep on improving, perfecting
every little step of the process.
This philosophy is now passed on to Kygo Life. It is built
upon Scandinavian design with sophisticated items that
have enough backbone to become classics. I hope you
will enjoy them for years to come.
Kyrre Gørvell-Dahll
Creative Director, Kygo Life
ENGLISH
4
Congratulations! Thank you for choosing Kygo A9/600 Bluetooth stereo
headphones. Before using them, you should read this manual to
familiarize yourself with the Bluetooth functions of your mobile phone
or other devices.
Getting Started
ENGLISH
5
Precautions
1. Please follow the instructions given in this manual carefully to
ensure your safety. Before using Kygo A9/600 headphones, we
would strongly encourage you to read through this user manual.
2. Pay particular attention to any edges, uneven surfaces, metal
parts, accessories and packaging to avoid any possibility of injury.
3. Do not dismantle, repair or modify this product to prevent fire,
electric shocks or other product damage, which are not covered
under warranty.
4. Do not use any solvents or volatile liquids to clean Kygo A9/600
headphones.
5. Do not use your Kygo A9/600 headphones in hazardous situations.
ENGLISH
6
Features
1. Bluetooth 4.1 + EDR
2. 3.5mm music line-in function
3. Supports connection with 2 phones or devices
4. The headphone battery power status is displayed on iOS
5. aptX® and AAC® audio technology
6. Touch control
7
Touch Panel
Microphone3.5mm Audio Jack
Mirco USB Slot
LED Indicator
Multi-functional Button
ENGLISH
8
General Function
Operation LED Status
Power on Blue LED flashes 2 times
Power off Red LED flashes 2 times
Pairing Red LED & Blue LED flash alternately
Standby Blue LED flashes 3 times in 5 seconds
Incoming call Blue LED flashes continuously
Low battery Red LED flashes 2 times every 2 seconds
Charging Red LED stays lit during charging
Blue LED stays lit once charging is complete
ENGLISH
9
Basic Buttons Operation
Volume Up
Slide finger from “-”
to “+” to increase
volume step by
step.
Previous
Slide finger from
>” to “<.
Play/Pause/
Answer
Click on the
center when
playing music.
Next
Slide finger from
“< to>”.
Volume Down
Slide finger from
“+” to “-”.
ENGLISH
10
Power on: Press multi-functional button for 2 seconds. When blue
LED flashes twice, headphones are turned on.
Power off: Press multi-functional button for 3 seconds. When red LED
flashes twice then stops, headphones are turned on.
Adjust volume: Slide finger on touch panel from “-” to “+” to increase
volume. Slide it from “+” to “-” to decrease volume. When volume
reaches max or min, listen for a “tick” sound.
Play/Pause: Short press middle of touch panel to pause music. Press
again to restart.
Previous: Slide finger from “>” to “<” to go to previous track.
Next: Slide finger from “<” to “>” to go to next track.
ENGLISH
11
Answer Call: Short press middle of touch panel to answer incoming
calls.
End call: Short press middle of touch panel to end calls.
Reject call: Long press middle of touch panel to reject calls.
ENGLISH
12
Battery Capacity status: When connected to iOS devices, the
headphones battery power status is displayed in upper right corner
of device’s screen.
Charging: A new headphone has enough power for pairing and
dialing out several times. When it has low battery, please charge via
USB cable for 2 hours. During charging, red LED flashes. Once fully
charged, blue LED remains on.
Reset Mode: Connect headphones to computer via Micro USB
cable. When red LED light flashes, reset is complete.
ENGLISH
13
3.5mm music line-in function: Connect audio line-in cable to
3.5mm audio jack for wired music. (Phone call function cannot be
used in this mode).
Before connecting your audio line, please ensure that the
headphones are powered OFF.
1. Connect the 3.5mm audio cable to the headphone and audio
player.
2. Adjust volume of the audio player or music player to reach the
desired level.
3. Pairing: Each pair of A9/600 headphones can connect with two
separate phones or devices.
ENGLISH
14
3.5mm audio cable
ENGLISH
15
Pairing with one phone or other devices:
1. Make sure the headphones are powered OFF.
2. Press and hold the multifunction button for 5 seconds to enter into
pairing mode.
3. After red & blue LEDs flash alternately, there will be a sound to alert
you that they have entered into pairing mode.
4. Activate the Bluetooth function on your phone or device and
search for the headphones. Follow the instruction to enter “0000
as PIN if the mobile phone reminder appears.
5. Headphones or device can now be used to play your phone
music or for phone calls.
Pairing
ENGLISH
16
Pairing with two phones or other devices at the same time
1. Pair with theA” phone successfuly, then turn off the headphones.
2. Follow the same procedure with “B” phone.
3. Then power off the headphones again.
4. Power up headphones again. They will automatically connect to
phoneB” (the last one connected). To enable connection with
second phone, simultaneously short press multi-function button
and panel centre. Checkfound devices on phone “A and select
Kygo A9/600 to connect.
ENGLISH
17
Pairing to a phone with NFC function
1. Turn on your phone and ensure its NFC function is activated.
2. Turn on your Kygo A9/600 headphones.
3. Put your phone’s NFC zone near the left side of your Kygo A9/600
headphones.
4. If your phone needs to confirm the connection, press YES.
5. After successfully connecting, you can enjoy music, play games
and watch movies via your Kygo A9/600. You can also can control
the player in Kygo A9/600. You can also use the headphones to
control volume and next/previous tracks.
ENGLISH
18
Thanks to aptX® and AAC® codecs, the headphones can connect
wirelessly to any aptX enabled devices. Doing so vastly improves the
quality of Bluetooth streaming and delivers CD-quality sound.
Sound quality with aptX® and AA
ENGLISH
19
1 x pair stereo Bluetooth Kygo A9/600 headphones
1 x charging micro USB cable
1 x user manual
1 x 3.5mm audio cable
1 x Carrying bag
Kit Contents
ENGLISH
20
1. Always use an approved charger from a reputable manufacturer to
charge your headphones.
2. Always recharge your headphones if they have not been used for
more than twelve months.
Caution
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97

Kygo A9/600 Kasutusjuhend

Tüüp
Kasutusjuhend