Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To nd the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
Part no. MI_35007-01_1
Issued 2015-06-02
Öhlins Mechatronics Dashboard
35007-01
Installation Instruction
Before installing this product, check the contents of the
kit. If anything is missing, please contact an Öhlins dealer.
Kit Contents
Part No Pcs
Dashboard pre-series 35007-01 1
1
INSTALLATION GUIDE
1
1
Installation
On the Öhlins wiring harness, nd the white
diagnostic socket with the squared cap. Usu
-
ally located on the left side of the bike, see
image. (Marked “D” on the wiring harness).
2
Gently disconnect the squared cover on the
socket.
3
Connect the Dashboard.
4
Use the 3M Dual Lock tape provided in this kit
to mount the dashboard on the bike. Cut the
tape to desired length, place one part on the
back of the Dashboard and the other on the
desired Dashboard location, we recommend
to place the Dashboard on the fuel tank.
Note!
The adhesive tape is very strong, once mounted it will be
hard to change place.
Warning!
Before riding the bike, ensure that the Dashboard is
securely placed.
5
The Öhlins SCU is located under the front
seat.
Note!
The original SCU does not work with the Dashboard
software.
Note!
Once the new SCU and the Dashboard are mounted on
the bike, the ESA button can not be used to maneuver the
Öhlins mechatronics suspension.
6
2
INSTALLATION GUIDE
6
Calibration
After installation; Calibrate the system.
To reach the settings menu, turn ignition on
and at the same time hold a nger on the
dashboard. The dashboard will light up.
7
Operate the menu by the arrow buttons.
Choose CAL SPRING PRELOAD by pressing
the arrow pointing right, see image.
8
After calibration, press the return arrow button
to go back to the standard menu.
Thank you for choosing Öhlins!
7
8
-
1
-
2
-
3
-
4
teistes keeltes
- English: Ohlins 35007-01
Seotud paberid
Muud dokumendid
-
Manfrotto ART. 190CXPRO3 Kasutusjuhend
-
Starlane MAAT 2.0 Kasutusjuhend
-
Mio Cyclo 105 Lühike juhend
-
Smithco Spray Star 3185/3186 Rate-Sync Kasutusjuhend
-
-
-
-
