LG 29LN460R Kasutusjuhend

www.lg.com

OWNER’S MANUAL

LED TV

Please read this manual carefully before operating

your set and retain it for future reference.

P/NO : MFL67861602(1304-REV00)

Printed in Korea

LN46

**

* LG LED TV applies LCD screen with LED backlights.

A-2

TABLE OF CONTENTS

A-3 SETTING UP THE TV

A-3 Attaching the stand

A-3 Detaching the stand

A-4 Tidying cables

LANGUAGE LIST

English

Magyar

Polski

Česky

Slovenčina

Română

Български

Eesti

Lietuvių k.

Latviešu

Srpski

Hrvatski

Shqip

Bosanski

Македонски

Русский

B-1 MAKING CONNECTIONS

B-1 Antenna connection

B-5 Satellite dish connection

B-7 Adapter connection

B-10 HDMI connection

B-14 - ARC (Audio Return Channel)

B-16 DVI to HDMI connection

B-19 MHL connection

B-24 Component connection

B-27 Composite connection

B-29 Euro Scart connection

B-33 USB connection

B-36 CI module connection

B-39 Headphone connection

B-51 SPECIFICATIONS

COMMON

LANGUAGE

A-3

SETTING UP THE TV

CAUTION

y

When attaching the stand to the TV, place

the screen facing down on a cushioned

table or flat surface to protect the screen

from scratches.

26/29LN46

**

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

Detaching the Stand

1

Stand Base

2

1

Stand Base

26/29LN46

**

NOTE

y

When Detaching the stand from TV, Detach

the stand with lifting up the lever in the

direction of the arrow.

A-4

SETTING UP THE TV

Tidying cables

Gather and bind the cables with the cable holder.

CAUTION

y

Do not move the TV by holding the cable

holder, as the cable holders may break, and

injuries and damage to the TV may occur.

Cable Holder

Please read this manual carefully before operating

your set and retain it for future reference.

www.lg.com

OWNER’S MANUAL

LED TV

* LG LED TV applies LCD screen with LED backlights.

2

ENG

ENGLISH

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE NOTICE

3 EXTERNAL CONTROL DEVICE

SETUP

4 SAFETY INSTRUCTIONS

10 INSTALLATION PROCEDURE

10 ASSEMBLING AND PREPARING

10 Unpacking

12 Separate purchase

13 Parts and buttons

14 Lifting and moving the TV

15 Mounting on a table

16 Mounting on a wall

18 REMOTE CONTROL

19 USING THE USER GUIDE

20 MAINTENANCE

20 Cleaning your TV

20 - Screen, frame, cabinet and stand

20 - Power cord

20 TROUBLESHOOTING

21 SPECIFICATIONS

WARNING

y

If you ignore the warning message, you may

be seriously injured or there is a possibility

of accident or death.

CAUTION

y

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

y

The note helps you understand and use

the product safely. Please read the note

carefully before using the product.

3

ENGENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo

are trademarks or registered trademarks of HDMI Licensing LLC in the United States

and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that plays

DivX video. Visit divx.com for more information and software tools to convert your

les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu. Go to vod.

divx.com for more information on how to complete your registration.

“DivX Certied® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or

its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535

& other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and

the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this

product, please visit http://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping and handling) upon email request to

[email protected]. This offer is valid for three (3) years from the date on which you purchased the

product.

EXTERNAL CONTROL DEVICE SETUP

To obtain the external control device setup information, please visit www.lg.com

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and/or remote control in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat

- Near kitchen counters or humidifiers where they can easily be exposed to steam

or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

y

Do not place the product where it might be exposed to dust.

This may cause a fire hazard.

y

Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.

This plug must remain readily attached and operable when TV is in use.

y

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or

covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

y

Make sure to connect Mains cable to compliant AC mains socket with Grounded

earth pin. (Except for devices which are not grounded on earth.) Otherwise

possibility you may be electrocuted or injured.

y

Insert power cable plug completely into wall socket otherwise if not secured

completely into socket, fire ignition may break out.

y

Ensure the power cord does not come into contact with hot objects such as a

heater.

This may cause a fire or an electric shock hazard.

y

Do not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in fire or electric shock.

y

Bend antenna cable between inside and outside building to prevent rain from

flowing in.

This may cause water damaged inside the Product and could give an electric

shock.

y

When mounting TV onto wall make sure to neatly install and isolate cabling from

rear of TV as to not create possibility of electric shock /fire hazard.

5

ENGENGLISH

SAFETY INSTRUCTIONS

y

Do not plug too many electrical devices into a single multiple electrical outlet.

Otherwise, this may result in fire due to over-heating.

y

Do not drop the product or let it fall over when connecting external devices.

Otherwise, this may result in injury or damage to the product.

Desiccant

y

Keep the anti-moisture packing material or vinyl packing out of the reach of

children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the

patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause

suffocation. Keep it out of the reach of children.

y

Do not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

y

Dispose of used batteries carefully to ensure that a small child does not consume

them.

Please seek Doctor- Medical Attention immediately if child consumes batteries.

y

Do not insert any metal objects/conductors (like a metal chopstick/cutlery/

screwdriver) between power cable plug and input Wall Socket while it is connected

to the input terminal on the wall. Additionally, do not touch the power cable right

after plugging into the wall input terminal.

You may be electrocuted.(Depending on model)

y

Do not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the

inflammable substances.

y

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the

product, or inflammable objects such as paper and matches. Children must pay

particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the

product, unplug the power cord and contact the service centre.

y

Do not spray water on the product or scrub with an inflammable substance (thinner

or benzene). Fire or electric shock accident can occur.

y

Do not allow any impact, shock or any objects to fall into the unit, and do not drop

anything onto the screen.

You may be injured or the product can be damaged.

y

Never touch this product or antenna during a thunder or lighting storm.

You may be electrocuted.

y

Never touch the wall outlet when there is leakage of gas, open the windows and

ventilate.

It may cause a fire or a burn by a spark.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

y

If any of the following occur, unplug the product immediately and contact your local

service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

y

Unplug the TV from AC mains wall socket if you do not intend to use the TV for a

long period of time.

Accumulated dust can cause fire hazard and insulation deterioration can cause

electric leakage/shock/fire.

y

Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

7

ENGENGLISH

SAFETY INSTRUCTIONS

CAUTION

y

Install the product where no radio wave occurs.

y

There should be enough distance between an outside antenna and power lines to

keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

y

Do not install the product on places such as unstable shelves or inclined surfaces.

Also avoid places where there is vibration or where the product cannot be fully

supported.

Otherwise, the product may fall or flip over, which may cause injury or damage to

the product.

y

If you install the TV on a stand, you need to take actions to prevent the product

from overturning. Otherwise, the product may fall over, which may cause injury.

y

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional

parts) to the back of the product. When you install the set to use the wall mounting bracket (optional

parts), fix it carefully so as not to drop.

y

Only use the attachments / accessories specified by the manufacturer.

y

When installing the antenna, consult with a qualified service technician. If not

installed by a qualified technician, this may create a fire hazard or an electric shock

hazard.

y

We recommend that you maintain a distance of at least 2 to 7 times the diagonal

screen size when watching TV.

If you watch TV for a long period of time, this may cause blurred vision.

y

Only use the specified type of battery.

This could cause damage to the remote control.

y

Do not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

y

Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight ,

open fireplace and electric heaters.

y

Do not place non-rechargeable batteries in charging device.

y

Make sure there are no objects between the remote control and its sensor.

y

Signal from remote control can be interrupted due to external/internal lighting eg

sunlight, fluorescent lighting.

If this occurs turn off lighting or darken viewing area.

y

When connecting external devices such as video game consoles, make sure the

connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the

product.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not turn the product On/Off by plugging-in or unplugging the power plug to the

wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

y

Please follow the installation instructions below to prevent the product from

overheating.

- The distance between the product and the wall should be more than 10 cm.

- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in

a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

y

Take care not to touch the ventilation openings when watching the TV for long

periods as the ventilation openings may become hot. This does not affect the

operation or performance of the product.

y

Periodically examine the cord of your appliance, and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact

replacement part by an authorized servicer.

y

Prevent dust collecting on the power plug pins or outlet.

This may cause a fire hazard.

y

Protect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,

wall outlets, and the point where the cord exits the appliance.

y

Do not press strongly upon the panel with a hand or sharp object such as nail,

pencil or pen, or make a scratch on it, as it may cause damage to screen.

y

Avoid touching the screen or holding your finger(s) against it for long periods of

time. Doing so may produce some temporary or permanent distortion/damage to

screen.

y

When cleaning the product and its components, unplug the power first and wipe it

with a soft cloth. Applying excessive force may cause scratches or discolouration.

Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or

industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the

product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation,

corrosion or breakage).

y

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power

source even if you turn off this unit by SWITCH.

y

When unplugging the cable, grab the plug and unplug it, by pulling at the plug.

Don’t pull at the cord to unplug the power cord from the power board, as this could

be hazardous.

y

When moving the product, make sure you turn the power off first. Then, unplug the

power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or

cause electric shock.

9

ENGENGLISH

SAFETY INSTRUCTIONS

y

When moving or unpacking the product, work in pairs because the product is

heavy.

Otherwise, this may result in injury.

y

Contact the service centre once a year to clean the internal parts of the product.

Accumulated dust can cause mechanical failure.

y

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

y

If the product feels cold to the touch, there may be a small “flicker” when it is turned

on. This is normal, there is nothing wrong with product.

y

The panel is a high technology product with resolution of two million to six million

pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or

green) at a size of 1 ppm on the panel. This does not indicate a malfunction and

does not affect the performance and reliability of the product.

This phenomenon also occurs in third-party products and is not subject to

exchange or refund.

y

You may find different brightness and colour of the panel depending on your

viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with

the product performance, and it is not malfunction.

y

Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video

game) for a prolonged time may cause damage to the screen, resulting in retention of the image,

which is known as image sticking. The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours

for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of

the panel.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

y

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by

plastic thermal contraction due to tempera-ture and humidity. This noise is common for products

where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit, which supplies a large amount of current to operate a

product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

10

ENG

ENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you are

using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the TV should

be turned off if it will not be watched for some time, as this will reduce energy consumption.

y

The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

CAUTION

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

Some models have a thin film attached on to the screen and this must not be removed.

NOTE

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to upgrade

of product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick

and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory

stick does not fit into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

11

ENGENGLISH

ASSEMBLING AND PREPARING

Remote control,

batteries (AAA)

(See p.18)

Owner’s manual Cable holder

(See p. A-4)

Power Cord

(See p. B-7)

AC-DC Adaptor

(See p. B-7)

Component video cable

(See p. B-24)

Composite video cable

(See p. B-24, B-27)

Stand Base

(See p. A-3)

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modied for quality improvement without any notication.

Contact your dealer to buy these items.

These devices only work with certain models.

P

123

AN-MR400

Magic Remote

AN-VC4**

Video call camera

The model name or design may be changed depending on the upgrade of product functions,

manufacturer’s circumstances or policies.

13

ENGENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Touch Buttons Description

H

Scrolls through the saved programmes.

H

Adjusts the volume level.

OK

ꔉ

Selects the highlighted menu option or confirms an input.

SETTINGS

Accesses the main menu, or saves your input and exits the menus.

INPUT

Changes the input source.

/ I

Turns the power on or off.

1 All of the buttons are touch sensitive and can be operated through simple touch with your nger.

Remote Control Sensor

Touch Buttons

1

Screen

Speakers

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to

prevent the TV from being scratched or damaged

and for safe transportation regardless of its type

and size.

CAUTION

y

Avoid touching the screen at all times, as

this may result in damage to the screen.

y

It is recommended to move the TV in the box

or packing material that the TV originally came

in.

y

Before moving or lifting the TV, disconnect the

power cord and all cables.

y

When holding the TV, the screen should face

away from you to avoid damage.

y

Hold the top and bottom of the TV frame rmly.

Make sure not to hold the transparent part,

speaker, or speaker grill area.

y

When transporting a large TV, there should be

at least 2 people.

y

When transporting the TV by hand, hold the TV

as shown in the following illustration.

y

When transporting the TV, do not expose the

TV to jolts or excessive vibration.

y

When transporting the TV, keep the TV upright,

never turn the TV on its side or tilt towards the

left or right.

y

Do not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

15

ENGENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the

wall for proper ventilation.

10 cm

2 Connect the AC-DC Adapter and Power Cord

to a wall outlet.

CAUTION

y

Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the

at surface.

CAUTION

y

Make sure that children do not climb on or

hang on the TV.

NOTE

y

Use a platform or cabinet that is strong and

large enough to support the TV securely.

y

Brackets, bolts and ropes are not provided.

You can obtain additional accessories from

your local dealer.

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

Using the Kensington security system

(Depending on model)

The Kensington security system connector is

located at the rear of the TV. For more information

of installation and using, refer to the manual

provided with the Kensington security system or

visit

http://www.kensington.com.

Connect the Kensington security system cable

between the TV and a table.

Mounting on a wall

Attach an optional wall mount bracket at the rear

of the TV carefully and install the wall mount

bracket on a solid wall perpendicular to the

oor. When you attach the TV to other building

materials, please contact qualied personnel.

LG recommends that wall mounting be performed

by a qualied professional installer.

10 cm

Make sure to use screws and wall mount

bracket that meet the VESA standard. Standard

dimensions for the wall mount kits are described in

the following table.

Separate purchase(Wall Mounting Bracket)

Model

26/29LN46

**

VESA (A x B)

100 x 100

Standard screw

M4

Number of screws

4

Wall mount bracket

LSW130B

Leht laadib ...

LG 29LN460R Kasutusjuhend

See käsiraamat sobib ka

LG 29LN460R Kasutusjuhend

teistes keeltes

Seotud paberid