Silvercrest WE-2300 Kasutusjuhend

WE-2300

Multi-Band Radio

with FM/MW/SW tuner

Multi-Band Radio

with FM/MW/SW tuner

User manual and

service information

GB

IE

Radiomottagare

med UKV-/MV-/KV-tuner

Bruksanvisning och

serviceinformation

SE

Kære kunde. De kan finde den danske udgave af

brugervejledningen og serviceoplysninger for

dette produkt i pdf-format på nedenstående

websted: www.silvercrest.cc

DK

1601094

TARGA GmbH

Lange Wende 41

D-59494 Soest

www.silvercrest.cc

3

Maailmanradio

FM-/AM-/LA-viritin

Käyttöopas ja

huolto-ohjeet

FI

Radio

med FM-/AM-/HF-tuner

Brugervejledning og

serviceinformation

DK

*

Multi-Band Tuner WE-2300

English - 1

Introduction

Thank you for choosing a SilverCrest product.

The multi-band tuner SilverCrest WE-2300 is capable of tuning

up to 6 different short-wave bands, the FM (VHF) band and the

AM (medium wave) band. Furthermore the device features a

digital clock with alarm clock function.

Please read the following pages for instructions on how to use

your product.

Copyright

The entire content of this User’s Manual is copyrighted and is

provided to the reader for information purposes only.

Copying data and information without prior written and explicit

authorization from the author is strictly forbidden. This also

applies to any commercial use of the contents and information.

All texts and figures are up-to-date as per the date of print

release.

Multi-Band Tuner WE-2300

2 - English

Package Contents

 Multi-band tuner WE-2300

 2 AA-sized batteries, 1.5 V

 Pouch

 Earphones IEHS-2300

Multi-Band Tuner WE-2300

English - 3

Table of Contents

Introduction ........................................................................................................1

Copyright.......................................................................................................1

Package Contents.........................................................................................2

Important safety instructions..............................................................................4

Danger Through Noise Disturbance .............................................................4

Operating Environment.................................................................................5

Batteries........................................................................................................6

Children.........................................................................................................6

Intended Use.................................................................................................7

Overview.......................................................................................................8

Display ........................................................................................................10

Stand...........................................................................................................11

Technical Specifications .............................................................................12

Getting started..................................................................................................13

Inserting the Batteries.................................................................................13

Connecting a Plug-Type Power Adapter.....................................................14

Powering the Device On/Off .......................................................................14

Setting the Time..........................................................................................15

Using the Device..............................................................................................16

Tuning a Station..........................................................................................16

Setting the Alarm Clock ..............................................................................17

Enabling the Alarm......................................................................................18

The Sleep Timer..........................................................................................19

Connecting the Headphones ......................................................................20

Backlight......................................................................................................20

Connecting an External Antenna................................................................20

Setting the Sensitivity..................................................................................21

Selecting the Time Format..........................................................................21

Appendix..........................................................................................................22

Repair and Maintenance.............................................................................22

Disposal of Old and Defective Devices.......................................................23

Disposal of Batteries...................................................................................24

Conformity...................................................................................................24

Warranty Information...................................................................................25

Multi-Band Tuner WE-2300

4 - English

Important safety instructions

Before you use this device for the first time, please read the

following notes in this manual and heed all warnings, even if

you are familiar with handling electronic devices. Keep this

manual safe for future reference. If you sell the device or pass it

on, it is essential you hand over this manual also.

This icon denotes important information for the

safe operation of the product and for the user’s

safety.

This symbol denotes further information on the

topic.

Danger Through Noise Disturbance

Caution when using headphones. Listening at high

volume can harm the user’s auditory system.

Multi-Band Tuner WE-2300

English - 5

Operating Environment

The device is not for use in environments with high

temperatures or humidity (e.g. bathrooms), and must be kept

free of dust. Operating temperature and operating humidity: 5°C

to 35°, max. 85 % RH.

Always make sure that:

 there is free circulation of air (do not place the device on

shelves, on a carpet, on a bed, or anywhere that obstructs

the ventilation slots, and leave at least 10 cm clearance on

all sides;

 no direct heat sources (e.g. heating) can affect the device;

 no direct sunlight or bright artificial light reaches the device;

 contact with sprayed and dripping water and abrasive liquids

must be avoided and the device should never be operated

near water. It must especially never be immersed (do not

place any recipients containing liquids such as beverages,

vases, etc. onto or next to the device);

 the device is never placed in the immediate vicinity of

magnetic fields (e.g. loudspeakers);

 no fire sources (e.g. burning candles) are placed on or near

the device;

 no foreign bodies are introduced into the device;

 the device is not subject to any great temperature changes

as this may cause moisture through condensation and short-

circuit;

 the device is not subject to excessive shocks and vibrations;

Multi-Band Tuner WE-2300

6 - English

Batteries

Insert the batteries with the correct polarity. Refer to the polarity

markings beside the battery compartment. Do not try to

recharge the batteries and do not throw batteries into fire. Do

not mix batteries (old and new or carbon and alkaline, etc.).

Remove batteries when the device is not to be used for a long

time. Non-intended use may cause explosion and danger to life.

Children

Electrical appliances do not belong in the hands of children! Do

not allow children to use electrical devices when not under

supervision. Children may not comprehend the presence of

potential risks. Small parts can represent choking hazards. If a

battery is swallowed, seek medical help immediately. Keep the

packaging away from children too as there is danger of

suffocation.

Multi-Band Tuner WE-2300

English - 7

Intended Use

This device is a consumer electronics device. It has been

designed to receive and playback radio broadcasting stations.

Furthermore, the device may be used as an alarm clock. It may

only be used for private use, not industrial or commercial

purposes. Furthermore, the device may not be used in tropical

climates. The manufacturer is not liable for any damage or

interference caused by unauthorized modifications. Only use

the accessories recommended by the manufacturer. If you are

not using the device within the Republic of Germany, you must

observe the regulations and laws in the country of use.

Please note that country-specific regulations may exist

regarding the frequency bands that can be received. Any

information received from frequency bands located outside

those that are explicitly free for public use may not be used, nor

may its contents be forwarded to any third parties.

Multi-Band Tuner WE-2300

8 - English

Overview

Multi-Band Tuner WE-2300

English - 9

1 Telescopic antenna

2 Band selector

3 Set time

4 Select hours

5 Sleep Timer

6 Display

7 On/Off button

8 Battery compartment (on the back)

9 Speaker

10 Repeat alarm / Snooze

11 Set alarm clock time

12 Select minutes

13 Alarm on/off

14 Backlight

15 Volume control

16 Headphones connector jack

17 Connector for external antenna

18 Connection for plug-type power adapter (optional,

Polarity )

19 Strap

20 Frequency dial knob

21 DX/Local switch

22 Selection of 12-/24-hour clock format

23 Stand (on the back)

Multi-Band Tuner WE-2300

10 - English

Display

24 Afternoon indicator (PM)

25 Sleep Timer

26 Frequency band

27 Alarm indicator

28 Clock/frequency display

29 Frequency unit

Multi-Band Tuner WE-2300

English - 11

Stand

On the back panel of the device you’ll find a stand [23] that

allows to install the multi-band tuner in an almost vertical

position. To do this, fold-out the retractile stand [23].

Multi-Band Tuner WE-2300

12 - English

Technical Specifications

Operating voltage 3 V

Power adapter plug

polarity

Max. current consumption 100 mA

Battery Type 2x AA 1.5 V (LR6)

Output power 100 mW

Frequency bands

Please note that the given

tuning bands may slightly vary

upwards or downwards

because of product

tolerances.

FM 87,5 - 108 MHz

MW 530 - 1660 kHz

SW1 5,9 - 6,2 MHz

SW2 9,4 - 9,9 MHz

SW3 11,6 - 12,1 MHz

SW4 13,57 - 13,87 MHz

SW5 15,1 - 15,8 MHz

SW6 17,48 - 17,9 MHz

Dimensions 132 x 78 x 30 mm (W x H x D)

Weight 146 g (without batteries)

Headphones IEHS-2300

Impedance 32 Ohms

Nominal output voltage approx. 200 mV

Max. sound pressure level

with supplied headphones

approx. 85 dB(A)

Max. output voltage on

headphones jack

85 mV

Operating temperature 5 °C to 35 °C

Operating humidity 85 % rel. humidity

Multi-Band Tuner WE-2300

English - 13

This information describes the technical

characteristics of your device. Different national

regulations may apply in different countries

regarding the frequency bands that are free for

p

ublic use. Please note that receiving any

information from bands outside these frequency

bands will be illegal and may be subject to law

enforcement.

Getting started

You can power the device on either by using the supplied AA-

sized batteries or by using an optional plug-type power adapter

(not supplied). The power adapter must feature a compatible

power plug and output a voltage of 3V.

Do not use both means of power supply at the

same time. Remove batteries when the device is

to be operated using the power adapter.

Inserting the Batteries

Unplug the power adapter cable if there is one connected to the

product. Open the battery compartment cover [8] on the back

panel of the device by sliding it in the direction of the printed

arrow and folding it out. Insert the batteries with the correct

Multi-Band Tuner WE-2300

14 - English

polarity (+ and -). The correct polarity is labelled on the batteries

and beside the battery compartment. Close the battery

compartment cover and slide it in the opposite direction of the

arrow.

If the output volume weakens or the device fails to respond,

replace the batteries with new batteries of the same type. The

device will not notify you that the batteries are weak.

Remove batteries when the device is not to be

used for a long time.

Connecting a Plug-Type Power Adapter

Remove the batteries from the battery compartment [8] located

on the back panel of the device if any are inserted. Plug the

power adapter plug into the receptacle [18] of the multi-band

tuner. Plug the power adapter into an easily accessible wall

outlet.

Powering the Device On/Off

To power the device on, press the On/Off button [7] once. When

powered on, the device will display the currently tuned-in

frequency and the frequency band (FM, MW, SW).

Multi-Band Tuner WE-2300

English - 15

To power the device off, press the On/Off button [7] again.

When powered off, the current time will be shown on the display

[6].

Setting the Time

The time can only be set while the device is powered off. If it is

still powered on, press the On/Off button [7] to power the device

off.

Use the 12h/24h toggle switch [22] to change

between the 12- and 24-hour time display.

 Press and hold the TIME button [3].

 Then press the HOUR button [4] repeatedly to set the hour.

You can also keep the HOUR button [4] pressed down to

accelerate the digit adjustment. To distinguish ante meridian

(morning) and post meridian (afternoon) time for the 12-hour

display, "PM" [24] will display for post meridian clock hours.

 Keep the TIME button [3] pressed. Then press the MIN

button [12] repeatedly to set the minutes. You can also keep

the MIN button [12] pressed down to accelerate the digit

adjustment.

 Release the TIME button [3] after the clock has been set

correctly.

Multi-Band Tuner WE-2300

16 - English

Please note that you should adjust the clock

when you move into a different time zone.

Using the Device

Tuning a Station

You can only pivot the telescopic antenna and

not retract it into the device housing, otherwise

you risk seriously damaging your device.

 Power the device on.

 Use the volume adjustment button [15] to set the desired

sound volume.

 First select the desired frequency band. To do this, use the

band selector [2]. The currently tuned frequency band will

show on the display [6].

 Fully extract the telescopic antenna [1].

 Rotate the frequency dial knob [20] to tune the desired

frequency. The frequency displays in MHz (for FM and SW)

and in kHz (for MW). If required, move the telescopic

antenna into a different position or move the device to

optimise reception of the current station.

Multi-Band Tuner WE-2300

English - 17

Setting the Alarm Clock

Make sure that the clock has been set correctly (see the page

15 - Setting the Time). The alarm time can only be set while the

device is powered off. If it is still powered on, press the On/Off

button [7] to power the device off.

 Press and hold the AL.SET button [11]. The indication

“ALARM” [27] starts blinking on the display.

 Then press the HOUR button [4] repeatedly to set the hours

of the alarm time. You can also keep the HOUR button [4]

pressed down to accelerate the digit adjustment. To

distinguish ante meridian (morning) and post meridian

(afternoon) time for the 12-hour display, "PM" [24] will

display for post meridian clock hours.

 Keep the AL.SET button [11] pressed. Then press the MIN

button [12] repeatedly to set the minutes of the alarm time.

You can also keep the MIN button [12] pressed down to

accelerate the digit adjustment.

 Release the AL.SET button [11] after the alarm clock has

been set correctly.

Leht laadib ...

Silvercrest WE-2300 Kasutusjuhend

Silvercrest WE-2300 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid