Silvercrest SKD 1000 A1 Kasutusjuhend

SKD 1000 A1

Cassette Digitiser

with playback function

Cassette Digitiser

with playback function

User manual and

service information

GB

IE

Kasettien digitointilaite

Toistotoiminto

Käyttöopas ja huolto-ohjeet

FI

USB-kassettbandspelare

med uppspelningsfunktion

Bruksanvisning och

serviceinformation

SE

Bånd-digitaliserer

med afspillingsfunktion

Brugervejledning og

serviceinformation

DK

1617135

TARGA GmbH

Lange Wende 41

D-59494 Soest

www.silvercrest.cc

3

Bäste kund!

På följande webbplats hittar du den svenska versionen av

instruktionsboken för den här produkten i pdf-format, tillsammans

med serviceinformation: www.silvercrest.cc

SE

*

Cassette Digitizer SilverCrest SKD 1000 A1

Important Safety Instructions

Before you use this device for the first time, please read the following notes in this

manual and heed all warnings, even if you are familiar with handling electronic

devices. Keep this manual safe for future reference. If you sell the device or pass it

on, it is essential that you also hand over this manual.

This icon denotes important information for safe operation of the

product and for the user’s safety.

This icon denotes further information on the topic.

Risks associated with excessive volume levels

Exercise caution when using the earphones SilverCrest PS-08.

Listening at a high volume can damage your hearing.

In accordance with safety regulations the maximum permitted noise level is 100

dB(A). The device fully complies with these legal requirements.

Do not use the earphones at high volume levels, otherwise you will damage your

hearing and possibly disturb other people. Although the device is designed to

enable you to perceive external noise, never adjust the volume to such a high level

that you are not capable of hearing what is happening around you.

Under dangerous circumstances (for example when driving a vehicle or when

working with machines) the sound may distract your attention or prevent you from

being aware of what is happening around you. You should not use the device in

these situations.

Operating Environment

The device is not designed for use in environments with high temperatures or

humidity (e.g. bathrooms), and must be kept free of dust. Operating temperature

and operating humidity: 5°C to 35°, max. 85 % RH.

English 1

Cassette Digitizer SilverCrest SKD 1000 A1

Always make sure that:

• there is free circulation of air (do not place the device on shelves, on a carpet,

on a bed, or anywhere that obstructs the ventilation, and ensure at least 10 cm

clearance on all sides);

• no direct heat sources (e.g. radiators) can affect the device;

• no direct sunlight or bright artificial light reaches the device;

• contact with sprayed and dripping water and abrasive liquids must be avoided

and the device should never be operated near water. It must especially never

be immersed (do not place any items containing liquids such as beverages,

vases, etc. onto or next to the device);

• the device is never placed in the immediate vicinity of magnetic fields (e.g.

loudspeakers);

• no foreign bodies enter the device;

•

the device is not subject to any great temperature changes as this may cause

moisture through condensation and short-circuits;

• the device is not subjected to excessive shocks and vibrations.

• Candles and any other open flames must be kept away from this

product at any times in order to avoid the risk of fire.

2 English

Cassette Digitizer SilverCrest SKD 1000 A1

Batteries

Insert the batteries with the correct polarity. Refer to the polarity markings beside

the battery compartment. Do not try to recharge the batteries and do not throw

batteries into the fire. Do not mix battery types (old and new or carbon and alkaline,

etc.). Remove the batteries when the device is not to be used for a long time.

Improper use may cause explosions and danger to life.

Children

Electrical appliances do not belong in the hands of children! Do not allow children

to use electrical devices when not under supervision. Children may not understand

that they can be dangerous. Small parts can represent choking hazards. Keep the

packaging away from children too as there is danger of suffocation.

Batteries / rechargeable batteries can represent choking hazards. Keep batteries

out of reach of children. If a battery is swallowed, seek medical help immediately.

Intended Use

This is a consumer electronics device. It is designed for playing and digitizing audio

cassettes. It may only be used for private use, not industrial or commercial

purposes. Furthermore, the device may not be used in tropical climates. Only

cables and external devices that comply with safety standards and the

electromagnetic compatibility and shielding quality of this device may be used.

Failure to comply with this requirement can result in interference (e.g. mains hum

when using an optional mains adapter).

This device fulfils all conformity-relevant norms and standards. Any modifications

to the device may result in these directives no longer being met. Only use the

accessories recommended by the manufacturer. If you are not using the device

within the Republic of Germany, you must observe the regulations and laws in the

country of use.

English 3

Cassette Digitizer SilverCrest SKD 1000 A1

Repair and Maintenance

Repairs are required when this device has been damaged in any way, for example

when the device housing is damaged, when liquids or objects have entered the

device or when the product has been exposed to rain or moisture. Repairs are also

necessary when the product does not perform normally or if it has been dropped. If

smoke, unusual noises or smells are noticed, switch off the device immediately. In

these cases the device should no longer be used and should be inspected by

authorized service personnel. Please contact qualified personnel when servicing is

needed. Never open the housing of the device. Only use a clean, dry cloth for

cleaning. Never use any corrosive liquids. Do not attempt to open the housing of

the device, otherwise you will void your warranty.

Conformity Notice

This device complies with the basic and other relevant requirements of

the EMC Directive 2004/108/EC. Further information on the conformity

of this device can be found at www.silvercrest.cc. The declaration of

conformity can also be found at the end of this user manual.

4 English

Cassette Digitizer SilverCrest SKD 1000 A1

Disposal of Old Devices

If the product is labelled with a struck-out waste bin, it is subject to

European Directive 2002/96/EC. All electrical and electronic devices

must be disposed of separately from household waste at official

disposal centres. With proper disposal of old devices you avoid

damage to the environment and your personal health. For further

information about proper disposal, contact your local government,

disposal bodies or the shop where you bought the device.

Disposal of Batteries

Old batteries do not belong in the domestic waste! They must be

handed in to a collection point for waste batteries.

English 5

Cassette Digitizer SilverCrest SKD 1000 A1

Table of Contents

Important Safety Instructions.....................................................................................2

Risks associated with excessive volume levels.....................................................2

Operating Environment..........................................................................................2

Batteries.................................................................................................................4

Children..................................................................................................................4

Intended Use..........................................................................................................4

Repair and Maintenance........................................................................................5

Conformity Notice...................................................................................................5

Disposal of Old Devices.........................................................................................6

Disposal of Batteries...........................................................................................6

Table of Contents.......................................................................................................7

Introduction................................................................................................................9

Package Contents......................................................................................................9

Getting Started...........................................................................................................9

Connectors and Controls........................................................................................9

Left Panel..........................................................................................................10

Right Panel.......................................................................................................10

Top....................................................................................................................10

Front..................................................................................................................11

Interior view of the cassette compartment........................................................11

Installing the Conversion Software.......................................................................11

System Requirements......................................................................................11

Installing AudioLava..........................................................................................11

Preparing the Cassette Digitizer..........................................................................12

6 English

Cassette Digitizer SilverCrest SKD 1000 A1

Inserting the Batteries.......................................................................................12

Playing Cassettes....................................................................................................13

Connecting the earphones...................................................................................13

Playing audio cassettes........................................................................................13

Inserting an audio cassette...............................................................................13

Playing the cassette..........................................................................................14

Removing the audio cassette...........................................................................14

Copying Audio Cassettes to a PC...........................................................................15

Connecting the device to your PC........................................................................15

Copying the cassette content to the PC...............................................................16

Editing the digitized content.................................................................................19

Appendix..................................................................................................................24

Technical Specifications.......................................................................................24

Troubleshooting....................................................................................................25

The cassette digitizer can’t be switched on......................................................25

No sound...........................................................................................................25

Problems when copying cassette content to a computer.................................25

Cleaning...............................................................................................................26

Warranty Information............................................................................................27

EC-Declaration of Conformity...............................................................................79

English 7

Cassette Digitizer SilverCrest SKD 1000 A1

Introduction

Thank you for choosing a SilverCrest product. With this cassette digitizer you can

not only play your audio cassettes when moving or travelling; you can also convert

them to a modern, digital multimedia format and even store the digital audio data

on a CD or a USB memory stick.

Package Contents

SilverCrest Cassette

Digitizer SKD 1000 A1

SilverCrest

earphones PS-08

USB cable, length 70 cm

2 AA-sized brand-name

batteries, 1.5 V

CD with the AudioLava

conversion software (not

shown)

User manual with service

information (not shown)

Getting Started

Connectors and Controls

This User Manual has a fold-out cover. Please fold out the title page and read the

following descriptions. This will enable you to always have the diagram visible,

8 English

Cassette Digitizer SilverCrest SKD 1000 A1

permitting a better understanding of the location of the different buttons and

sockets.

Left Panel

1 Socket for an optional mains adapter

Right Panel

2 Volume control: Turn the volume control knob to increase or lower the

volume.

3 USB port: The USB port is used to connect the USB cable to allow

connection of the device to a PC and copying of audio cassettes. We

recommend that you use a USB 2.0 port on your PC.

4 Earphone socket: For connecting the supplied earphones.

5 Release button for the cassette compartment cover. To open the cassette

compartment, slide this button in the direction of the arrow.

Top

6 DIR button: Press this button during playback or when playback has been

stopped to switch between playback of side A and side B of the cassette.

7  /  button: Sliding this button to the  position ensures that the

playback stops when the end of the current side of the cassette is reached.

If you wish to continue the playback with the other side of the cassette when

the end of the current side is reached (continuous playback), slide this

button to the  position.

8 FF button: This is the Fast Forward button for advancing the cassette tape.

To stop the Fast Forward function, press the STOP button (11).

The STOP button (11) is also used to stop the Fast Forward function when

the end of the tape is reached.

9 REW button: Press this button to rewind the cassette tape. To stop the

Rewind function, press the STOP button (11).

The STOP button (11) is also used to stop the Rewind function when the

start of the tape is reached.

English 9

Cassette Digitizer SilverCrest SKD 1000 A1

10 PLAY button: Press this button to start playback of the cassette.

11 STOP button: Press this button to stop playback and to stop the Fast

Forward or the Rewind function.

Front

12 Cassette compartment cover

Interior view of the cassette compartment

13 Battery compartment

Installing the Conversion Software

System Requirements

With the supplied AudioLava conversion software you can digitize your analog

recordings and at the same time filter out hissing, sound imperfections, crackling

and other background noise, and add Hall effects etc. Before installing the

software, make sure that your computer fulfils the following minimum requirements:

• Pentium or compatible processor, 800 MHz or higher

• Minimum of 256 MB RAM

• Graphics board with a colour depth of at least 16 bits

• A Windows-compatible sound board

• Operating system: Windows 7, Windows Vista, Windows XP or Windows 2000

• DirectX 8.0 or higher.

Installing AudioLava

The software is provided on the supplied CD.

1. Insert the supplied CD into the CD or DVD drive of your computer. The

software should install and launch automatically; if it doesn’t, double-click on

the “CD_Start.exe” file in the main folder on the CD.

2. Then follow the on-screen instructions to install the software. If you are then

asked whether the computer should be restarted, click on Yes.

10 English

Cassette Digitizer SilverCrest SKD 1000 A1

Preparing the Cassette Digitizer

You can operate the device using the supplied AA-sized (Mignon) batteries, via the

USB cable connected to a PC, or by using an optional mains adapter (not

supplied). The mains adapter must have a compatible DC output plug and must

supply an operating voltage of 3V. Mains adapter output polarity:

Inserting the Batteries

The battery compartment (13) is located underneath the cassette compartment

cover (12).

1. Slide the black release button (5) in the direction indicated by the arrow to

release the cassette compartment cover, and then raise the cover.

2. Insert your fingernail into the recess above the cover of the battery

compartment (13) and open the cover. Remove the cover and put it to one

side.

3. Insert the supplied AA batteries into the unit with the correct polarity (+ and -).

Push the first battery as far as you can to the left so that it is no longer visible,

and then insert the second battery (see the diagram to the left of the battery

compartment).

4. Replace the cover on the battery compartment. First position its lower edge on

the two lugs at the bottom left and right of the battery compartment, and then

carefully press down the top edge of the cover with your finger until it clicks into

place.

If the volume level drops, or if the device stops operating or the

playback becomes distorted, replace the batteries with new batteries

of the same type. The device does not provide an indication that the

batteries are weak.

English 11

Cassette Digitizer SilverCrest SKD 1000 A1

Playing Cassettes

You can use your SilverCrest SKD 1000 A1 just like a normal, portable cassette

player for listening to audio cassettes. Thanks to its compact and lightweight

construction and the independent power supply via batteries, it’s a mobile device

that can be used when travelling, jogging etc. To be able to directly listen to audio

cassettes, you first need to connect the earphones.

Connecting the earphones

When using the earphones, please heed the warnings in the Safety Instructions on

page 1.

To listen to music, you can connect the supplied SilverCrest PS-08 earphones.

Caution when using the supplied earphones. Listening at a high

volume can damage your hearing.

1. Insert the earphones jack into the earphones socket (4).

Only use the earphones supplied with your device (SilverCrest PS-

08). Other types of earphones can produce harmful sound pressure

levels.

Playing audio cassettes

Inserting an audio cassette

1. Open the cassette compartment cover by sliding the release button (5) in the

direction of the arrow.

2. Insert an audio cassette into the cassette compartment. Insert the side at

which the tape is visible first. Make sure that the two pins at the top of the

cassette compartment slot into the corresponding holes of the cassette.

12 English

Cassette Digitizer SilverCrest SKD 1000 A1

Before inserting the cassette, you should make sure that the tape is

slightly tensioned. This is to avoid the tape becoming chewed. Hold

the cassette in front of you with one hand, and using a finger of your

other hand, or a pencil, rotate the right-hand knurled wheel clockwise.

3. Close the cassette compartment by simply pressing down the cover until it

clicks into place.

Playing the cassette

• You can play, stop, fast forward or rewind the cassette using the PLAY (10),

STOP (11), FF (8) and REW (9) buttons. See the description of the buttons on

page 9.

• During the playback, you can adjust the volume by turning the volume knob (2)

clockwise or anticlockwise.

Removing the audio cassette

1. If the tape is still playing or if the Fast Forward or Rewind functions are

operating, press the STOP button (11) to stop it.

2. Open the cassette compartment cover by sliding the release button (5) in the

direction of the arrow.

3. Remove the audio cassette from the cassette compartment. First lift the side of

the cassette at which the tape is visible. Insert a fingernail into the upper edge

of the cassette and lift it slightly, so that you can then grip it at both sides and

completely remove it from the cassette compartment.

4. Close the cassette compartment by simply pressing down the cover until it

clicks into place.

English 13

Cassette Digitizer SilverCrest SKD 1000 A1

Copying Audio Cassettes to a PC

To be able to digitize and store your cassettes on a PC, you must first have

installed the supplied AudioLava software on your computer (see page 10,

Installing AudioLava).

Connecting the device to your PC

1. Connect your SilverCrest SKD 1000 A1 to a switched-on PC using the supplied

USB cable. Connect the end of the cable with the small USB connector to the

USB port (3) on the device, and the end with the large USB connector to a

USB 2.0 port on your PC.

2. Your SilverCrest SKD 1000 A1 should then be detected automatically by the

operating system and the necessary drivers should be installed automatically

(this step is only performed the first time you connect the SilverCrest SKD

1000 A1 to your PC).

When the cable has been connected and the PC is switched on,

power will be supplied to your SilverCrest SKD 1000 A1 by the

computer via the USB cable. You can leave the batteries in place or

the optional mains adapter connected.

14 English

Cassette Digitizer SilverCrest SKD 1000 A1

Copying the cassette content to the PC

This section provides basic information on digitizing an audio cassette on your PC.

The AudioLava software used to perform the digitizing offers a wide range of

functions which are not all described in this user manual. A detailed description of

the functions of AudioLava is available in the AudioLava online Help files.

1. Start the AudioLava program by clicking on the icon on the Desktop. The

AudioLava Cleaning Wizard is then displayed.

2. In the Cleaning Wizard, click on "Record from tape deck" to start recording.

The recording window is then displayed.

English 15

Cassette Digitizer SilverCrest SKD 1000 A1

3. Insert the cassette that you wish to digitize and then press the PLAY button

(10) to start playing the tape. Adjust the volume using the Volume Control knob

(2) on the device as described in the "Input Level" option (see Step 4 below).

Use the FF button (8) or the REW button (9) to spool to the start of

the tape or to find the track that you wish to digitize.

If you wish, you can activate the "Listen to input (digital monitoring)"

option (described in the next step) to monitor the audio signal via the

PC speakers.

4. Click on the red "Record" button to start recording.

The following options are also available in the Recording window:

16 English

Cassette Digitizer SilverCrest SKD 1000 A1

• Pause: Clicking on this button temporarily stops the recording. To continue

recording after a pause, simply click once again on “Record”.

• Delete: Clicking on this button deletes the current recording.

• Timer record: Click on this button to start timer-controlled recording. A

new dialog box is displayed in which you can define the start and end

times for recording:

You can have the recording to start immediately, when an input signal is

detected or have the recording to start at a specific date and time.

On the other hand, you can have the recording not to stop automatically, to

stop automatically after a specific time of silence (in this case you have to

set the silence threshold value) or after a recording time you set.

• Line in: This list contains the signal sources available on your computer.

To record digital audio data from your SilverCrest SKD 1000 A1, select

"Master Volume" (Windows VISTA/7) or "Microphone Array" (Windows

XP).

• Remove DC Offset: Some computer sound boards superimpose a DC

voltage on the audio signal. You can activate this option to remove the

resulting DC offset.

• Emulate phono preamplifier: This option is provided for recording from

record players and should be left deactivated for your SilverCrest SKD

1000 A1.

• Listen to input (digital monitoring): Activating this option outputs the

Line In signal via the PC speakers. You should not, however, keep this

option activated for the entire duration of the recording, since this can

result in audio dropouts during recording on slow systems.

• Input Level: The level meters here show the levels of the input signal on

the left and right stereo channels. You can adjust the signal level using the

slide control to the right of the level indicators. Please make sure that the

English 17

Cassette Digitizer SilverCrest SKD 1000 A1

loudest passages never reach or exceed the maximum level of 0 dB,

otherwise your recording will become clipped (overmodulated). The

“Maximum input level” displayed at the bottom of this section of the display

shows the maximum level measured during the entire recording. The

“Reset” button allows you to delete the stored maximum level and repeat

the recording with a lower level.

If necessary, adjust the level using the Volume Control knob (2) on your

digitizer.

5. Once you have digitized the desired tracks or the entire content of the

cassette, click on the "Pause" button to end the recording on the PC, and

then press the STOP button (11) on the cassette digitizer to stop the

playback.

Editing the digitized content

1. Click on the “Next” button at the bottom of the window to open the

“Restoration” tab, where you can edit your recording.

18 English

Leht laadib ...

Silvercrest SKD 1000 A1 Kasutusjuhend

Silvercrest SKD 1000 A1 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid