Way Basics WB-3SR-NL Kasutusjuhend

Tüüp
Kasutusjuhend

See käsiraamat sobib ka

Watch and Assemble www.waybasics.com/help-triplet Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
1 2 3
4 5 6
7 8 9
Peel adhesive strips off backboard. Insert 4 pins in backboard.
Carefully remove the 3M protective
layer from adhesive.
Place alignment pins in vertical
zBoards.
Align vertical zBoards (with inner holes
facing backboard) to horizontal zBoard
as shown.
Align backboard on horizontal zBoard.
(holes only on one side of board)
Repeat steps 1-8.
Visit links below for more details.
Enjoy building possibilities!
Next, align middle horizontal zBoard
(there will be holes on both sides of
board) on top of vertical zBoards.
Adhere vertical zBoards on to
backboard.
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
3 Backboards
adhesive strips on 3 edges
4 Horizontal zBoards
6 Vertical zBoards
adhesive strips on 2 edges
36 Pins
Included
TRIPLET SHELF
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
  • Page 1 1

Way Basics WB-3SR-NL Kasutusjuhend

Tüüp
Kasutusjuhend
See käsiraamat sobib ka