Help and Comments www.waybasics.com/contact
version 042017
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Important
THIS SIDE UP
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
2
1
3
5
4
6
Insert alignment pins in vertical zBoards.
Align middle board on top as shown.
Press down firmly.
Repeat steps 1 - 3 to add second tier.
Align top zBoard onto unit and press
down firmly.
Enjoy building possibilities!
Fit backboard into horizontal zBoard
groove. With grooves facing backboard,
align side zBoards onto bottom zBoard.
Press down firmly.
Carefully remove the protective layer
leaving the 3M adhesive on zBoard
(adhesive shown in yellow).
1 Middle zBoard
groove on 2 sides
4 Vertical zBoards
adhesive strip on top and bottom
1 Top zBoard, 1 Bottom zBoard
groove on 1 side
2 Backboards
16 Pins
Included
2 SHELF BOOKCASE
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
-
1
