Tunturi E50 Manual Concise

-Please read this assembly manual carefully prior to assembling this product.

- Lesen Sie sich vor der Montage des Produkts diese Montageanleitung sorgfältig durch.

- Veuillez lire attentivement le présent manuel d’assemblage avant de monter ce produit.

- Lees deze montagehandleiding zorgvuldig voordat u dit product in elkaar gaat zetten.

- Leggere attentamente questo manuale di montaggio prima di montare il prodotto.

- Antes de montar este producto, lea atentamente este manual de montaje.

- Läs den här monteringshandboken noggrant före användning av den här produkten.

- Lue tämä asennusohje huolellisesti ennen tämän tuotteen asennusta.

Attention, Achtung, Attention, Attentie, Attenzione, Atención, Giv akt, Huomio

Assembly manual

Montageanleitung

Manuel d’assemblage

Montagehandleiding

Manuale di montaggio

Manual de montaje

Monteringshandbok

Asennusohje

GET YOUR

COMPLETE

USER MANUAL

ONLINE

http://manuals.tunturi.com

WWW

IMPORTANT

FEEL BETTER EVERY DAY

www.tunturi.com

GB

DE

FR

NL

IT

ES

SV

SU

Tunturi Routes

iOS & Android

ROUTES

GET YOUR

COMPLETE

USER MANUAL

ONLINE

http://manuals.tunturi.com

WWW

IMPORTANT

15 - 19

20 - 24

25 - 29

30 - 34

35 - 39

40 - 44

45 - 49

50 - 54

PERFORMANCE E50 BIKE

3

Performance E50 Bike

A

NO.92 ﬂat Washer φ8*φ19*2t (4) NO.94 knob M8 (1)

Screwdriver (1)

NO.91 SCREW M8*P1.25*60MM (4)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

NO.95 Carriage Bolt M8*P1.25*75MM (1)

Allen Key(1)

Box Spanner(1)

E50B/E60B/E80B

i

4

Performance E50 Bike

B

100 cm

NO.92 ﬂat Washer φ8*φ19*2t (4) NO.94 knob M8 (1)

Screwdriver (1)

NO.91 SCREW M8*P1.25*60MM (4)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

NO.95 Carriage Bolt M8*P1.25*75MM (1)

Allen Key(1)

Box Spanner(1)

5

Performance E50 Bike

C

D-0

56

NO.95 Carriage Bolt M8*P1.25*75MM (1)

NO.91 SCREW M8*P1.25*60MM (4)

NO.92 ﬂat Washer φ8*φ19*2t (4)

NO.94 knob M8 (1)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

6

Performance E50 Bike

D-1

91

92

97

91

92

104

NO.95 Carriage Bolt M8*P1.25*75MM (1)

NO.91 SCREW M8*P1.25*60MM (4)

NO.92 ﬂat Washer φ8*φ19*2t (4)

NO.94 knob M8 (1)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

7

Performance E50 Bike

D-2

54-R

54-L

Scan to see YouTube tutorial

LLeft hand crank

Make sure to use Left hand pedal

L

RRight hand crank

Make sure to use Right hand pedal

R

NO.95 Carriage Bolt M8*P1.25*75MM (1)

NO.94 knob M8 (1)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

8

Performance E50 Bike

D-3

77

NO.95 Carriage Bolt M8*P1.25*75MM (1)

NO.94 knob M8 (1)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

9

Performance E50 Bike

D-4

A-2A-1

A-2

A-1

A-2

A-1

A-1 A-2

Scan to see

YouTube tutorial

NO.95 Carriage Bolt M8*P1.25*75MM (1)

NO.94 knob M8 (1)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

10

Performance E50 Bike

D-5

1

2

C

B

A

NO.95 Carriage Bolt M8*P1.25*75MM (1)

NO.94 knob M8 (1)

NO.96 Screws M5x14mm (2)

NO.93 Bushing φ8.2 *φ14.8*25L(1)

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

11

Performance E50 Bike

D-6

比例

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

2

19

14

Preassembled

Vormontiert

Pré assemblé

Voorgemonteerd

Pre-assemblato

Pre ensamblado

Förmonterad

Esikoottu

4x #2 Screw (M5x10)

12

Performance E50 Bike

D-7

Box Spanner(1)

Allen Key(1)

Screwdriver (1)

比例

13

Performance E50 Bike

D-8

14

Performance E50 Bike

E-1

15

English

USER MANUAL ON OUR WEBSITE

To reduce the impact on the environment,

you will only find the assembly steps in this manual.

To learn how to use and maintain this product,

please download the user manual from:

manuals.tunturi.com

Welcome

Important Safety Instructions

This manual is an essential part of your training

equipment please read all instructions in this

manual before you start using this equipment. The

following precautions must always be followed:

Index

Welcome �� 15

Safety warnings �� 15

Electrical safety ��16

Assembly instructions �� 16

Description illustration A ��16

Description illustration B ��16

Description illustration C ��16

Description illustration D ��17

Additional assembly information ��17

Additional information ��18

Use�� 18

Adjusting the support feet ��18

Adjusting the console ��18

Adjusting the horizontal seat position ��18

Adjusting the vertical seat position ��18

Adjusting the handlebar ��18

Power supply ��18

Warranty �� 19

Declaration of the manufacturer �� 19

Disclaimer �� 19

Safety warnings

⚠ WARNING

• Read the safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions can cause

personal injury or damage to the equipment.

Keep the safety warnings and the instructions

for future reference.

⚠ WARNING

• Heart rate monitoring systems may be

inaccurate.

• Over exercise may result in serious injury

or death. If you feel faint stop exercising

immediately.

- The equipment is suitable for domestic

use only. The equipment is not suitable for

commercial use.

- Max. usage is limited to5 hrs a day.

- The use of this equipment by children or

persons with a physical, sensory, mental

or motorial disability, or lack of experience

and knowledge can give cause to hazards.

Persons responsible for their safety must give

explicit instructions or supervise the use of the

equipment.

- Before starting your workout, consult a

physician to check your health.

- If you experience nausea, dizziness or other

abnormal symptoms, immediately stop your

workout and consult a physician.

- To avoid muscular pain and strain, start each

workout by warming up and finish each workout

by cooling down. Remember to stretch at the

end of the workout.

- The equipment is suitable for indoor use only.

The equipment is not suitable for outdoor use.

16

English

- Only use the equipment in environments

with adequate ventilation. Do not use the

equipment in draughty environments in order

not to catch a cold.

- Only use the equipment in environments with

ambient temperatures between 10°C~35°C/

50°F~95°F. Only store the equipment in

environments with ambient temperatures

between 5°C~45°C/ 41°F~113°F.

- Do not use or store the equipment in humid

surroundings. The air humidity must never be

more than 80%.

- Only use the equipment for its intended

purpose. Do not use the equipment for other

purposes than described in the manual.

- Do not use the equipment if any part is

damaged or defective. If a part is damaged or

defective, contact your dealer.

- Keep your hands, feet and other body parts

away from the moving parts.

- Keep your hair away from the moving parts.

- Wear appropriate clothing and shoes.

- Keep clothing, jewellery and other objects away

from the moving parts.

- Make sure that only one person uses the

equipment at a time. The equipment must not

be used by persons weighing more than 135 kg

(300 lbs).

- Do not open equipment without consulting

your dealer.

Electrical safety

- Before use, always check that the mains voltage

is the same as the voltage on the rating plate of

the equipment.

- Do not use an extension cable.

- Keep the mains cable away from heat, oil and

sharp edges.

- Do not alter or modify the mains cable or the

mains plug.

- Do not use the equipment if the mains cable or

the mains plug is damaged or defective. If the

mains cable or the mains plug is damaged or

defective, contact your dealer.

- Always fully unwind the mains cable.

- Do not run the mains cable underneath the

equipment. Do not run the mains cable

underneath a carpet. Do not place any objects

on the mains cable.

- Make sure that the mains cable does not hang

over the edge of a table.

- Make sure that the mains cable cannot be

caught accidentally or tripped over.

- Do not leave the equipment unattended when

the mains plug is inserted into the wall socket.

- Do not pull the mains cable to remove the

mains plug from the wall socket.

- Remove the mains plug from the wall socket

when the equipment is not in use, before

assembly or disassembly and before cleaning

and maintenance.

⚠ WARNING

• Never use water or any other liquid directly

on or near the equipment, but only via a

damp cloth if moist is required to clean the

machine.

• Using liquid directly is harmful for the

equipment’s components, and may result in

an electric shock caused by a short cut circuit.

This could result in serious personal injury or

even death.

Assembly instructions

Description illustration A

The illustration shows what the trainer will looks

like after the assembly is completed.

You can use this as a reference during your

assembly, but do follow the assembly steps

always in the correct sequence as showed in the

illustrations.

Description illustration B

The illustration shows what components and parts

you should find when un-boxing your product.

‼ NOTE

• Small parts can be hidden/ packed in hollow

spaces in the Styrofoam product protection

• If a part is missing, contact your dealer.

Description illustration C

The illustration shows the hardware kit that comes

with your product.

The hardware kit contains bolts, washers, screws

, nuts etc. and the required tools to properly fit

your trainer.

17

English

Description illustration D

The illustrations shows you in the correct following

order how to assembly your trainer best.

‼ NOTE

• Part numbers shown in the assembly steps

are commencing with the spare part drawing

that can be found in the online version user

manual.

⚠ WARNING

• Assemble the equipment in the given order.

• Carry and move the equipment with at least

two persons.

⚠ CAUTION

• Place the equipment on a firm, level surface.

• Place the equipment on a protective base to

prevent damage to the floor surface.

• Allow at least 100 cm of clearance around the

equipment.

• Refer to the illustrations for the correct

assembly of the equipment.

Additional assembly information

D3 How to fit the pedals correctly�

‼ NOTE

• Right and left side are determined from an

exercising positions perspective.

Right hand pedal

Find the “R” or “L” mark on the pedal axle

- Fit the right hand pedal “R” into the right hand

crank.

- Firstly turn the pedal axle in clockwise direction

by hand.

- Use the wrench to fully tighten the pedal.

Left hand pedal

- Fit the left hand pedal “L” into the left hand

crank.

- Firstly turn the pedal axle in counter-clockwise

direction by hand.

- Use the wrench to fully tighten the pedal.

Click to see our supportive YouTube

video

https://youtu.be/3BiN9mc5Tmw?t=101

Additional information to Assembly step

D4 & D5

- Establish the wire connection between the

cable coming from the main frame, and the

lower part of the cable pre fitted in the upright

tube.

- Place the upright tube over the main frame

fixing bracket, in where the fixing bolts are pre-

assembled and stay pre-assembled.

( While lowering the upright tube, gently pull

the upper part of the cable up, to avoid the

cable get caught by the connection. )

- The upright tube should automatically find the

centre position, but it is advisable to make the

slightest correction needed to make sure the

position is good.

- The perfect position is when the fixing bolts are

perfectly centred in line with the upright tube

holes.

‼ NOTE

• Avoid the cable connection between these

two parts get pinched.

• By fastening the two bolts (turning in

clockwise direction) on the front side you will

widen the fixing bracket so the upright gets

fixed firmly.

- To fix the upright tube firmly it is needed to

tighten the bolt on the upper side first firmly.

- After fixing the upper bold, you need to fix the

lower bold firmly.

- By fixing the lower bold, the upright tube will

be repositioned slightly resulting that the upper

bold can be fixed a little more, therefore it is

needed to fix the upper bolt again.

- Repeat these steps until both bolts are firmly

fixed to ensure the upright tube fixation well.

Click to see our supportive YouTube

video

https://youtu.be/3BiN9mc5Tmw?t=180

‼ NOTE

• Save the tools provided with this product,

after you completed the product assembly,

for future service purposes.

18

English

Additional information

Packaging disposal

Government guidelines ask that we reduce the

amount of waste material disposed of in land fill

sites. We therefore ask that you dispose of all

packaging waste responsibly at public recycling

centres.

End of life disposal

We at Tunturi hope you enjoy many years of

enjoyable use from your fitness trainer. However,

a Time will come when your fitness trainer will

come to the end of its useful life. Under ‘European

WEEE Legislation you are responsible for the

appropriate disposal of your fitness trainer to a

recognised public collection facility.

Use

Adjusting the support feet

The equipment is equipped with adjustable

support feet.

If the equipment feels unstable, wobbly, or not

levelled well, these support feet can be adjusted

to make the required corrections.

- Turn the support feet in/ out as required to put

the equipment in a stable and as well possible

levelled position.

- Tighten the locknut’s* to lock the support feet.

‼ NOTE

• The equipment is most stable when it is

as low to the floor as possible. Therefore,

start to level the equipment by turning all

support feet fully in, before turning out the

required support feet to stabilize and level

the equipment.

Click to see our supportive YouTube

video

https://youtu.be/3BiN9mc5Tmw?t=535

Adjusting the console

The console can be adjusted according to the

height and the exercise position of the user.

- Loosen the console adjustment knob.

- Move the console to the required position.

- Tighten the console adjustment knob.

Adjusting the horizontal seat position

The horizontal seat position can be adjusted by

setting the seat to the required position.

- Loosen the seat adjustment knob.

- Move the seat to the required position.

- Tighten the seat adjustment knob.

Adjusting the vertical seat position

The vertical seat position can be adjusted by

setting the seat tube to the required position.

With the leg almost straight, the arch of the foot

must touch the pedal at its lowermost point.

- Loosen the seat tube adjustment knob.

- Move the seat tube to the required position.

- Tighten the seat tube adjustment knob.

Click to see our supportive YouTube

video

https://youtu.be/3BiN9mc5Tmw?t=486

Adjusting the handlebar

The handlebar can be adjusted according to the

height and the exercise position of the user.

- Loosen the handlebar adjustment knob.

- Move the handlebar to the required position.

- Tighten the handlebar adjustment knob.

Power supply

The trainer is powered by an external power

supply. Refer to the illustration to locate the

trainer power input. (Fig. E)

‼ NOTE

• Connect the power supply with the trainer

before connecting it to the wall outlet.

• Always remove power cord when machine is

not in use.

19

English

Warranty

Tunturi purchaser‘s warranty

Warranty terms

The consumer is entitled to the applicable legal

rights stated in the national legislation concerning

the commerce of consumer goods. This warranty

does not restrict these rights. The Purchaser’s

Warranty is only valid if the item is used in an

environment approved by Tunturi New Fitness BV,

and is maintained as instructed for that particular

equipment. The product-specific approved

environment and maintenance instructions are

stated in the “user manual” of the product. The

“user manual” can be downloaded from our

website. http://manuals.tunturi.com

Declaration of the manufacturer

Tunturi New Fitness BV declares that the product

is in conformity with the following standards and

directives: EN 957 (HB), 2014/30/EU . The product

therefore carries the CE label.

07-2022

Tunturi New Fitness BV

Purmerweg 1

1311 XE Almere

The Netherlands

Disclaimer

- The product and the manual are subject to

change.

- Specifications can be changed without further

notice.

- Check our website for the latest user manual

version.

20

Deutsch

Diese deutsche Bedienungsanleitung ist eine

Übersetzung des englischen Textes. Es können

keine Rechte auf diese Übersetzung abgeleitet

werden.

Index

Benutzerhandbuch auf unserer Website

Um die Auswirkungen auf die Umwelt zu reduzieren,

finden Sie in dieser Anleitung nur die Montageschritte.

Um zu erfahren, wie Sie dieses Produkt verwenden

und warten,laden Sie bitte das Benutzerhandbuch von

folgender Seite herunter:

manuals.tunturi.com

Willkommen

Wichtige sicherheitshinweise

Diese Anleitung ist ein unerlässlicher Teil Ihres

Trainingsgeräts: Lesen Sie alle Anweisungen in

diesem Handbuch durch, bevor Sie dieses Gerät

verwenden. Die folgenden Vorsichtsmaßnahmen

müssen immer befolgt werden.

Warnhinweise zur Sicherheit

⚠ WARNUNG

• Lesen Sie die Warnhinweise zur Sicherheit

und die Anweisungen. Werden die

Warnhinweise zur Sicherheit und die

Anweisungen nicht befolgt, kann dies zu

Personenverletzungen und Schäden am

Gerät führen. Bewahren Sie die Warnhinweise

zur Sicherheit und die Anweisungen zur

künftigen Bezugnahme auf.

⚠ WARNUNG

• Herzfrequenz-Überwachungssysteme können

ungenau sein.

• Eine Überanstrengung kann zu schweren

Schädigungen oder zum Tod führen. Wenn

Sie sich schwach oder ohnmächtig fühlen,

stellen Sie die Übungen unverzüglich ein.

- Das Gerät ist nur für den Hausgebrauch

geeignet. Das Gerät ist nicht für den

gewerblichen Gebrauch geeignet.

- Die maximale Verwendung ist auf 5 Stunden

pro Tag beschränkt

- Wenn dieses Gerät von Kindern oder Personen

mit körperlicher, sensorischer, geistiger oder

motorischer Behinderung verwendet wird,

oder wenn nicht genügend Erfahrung und

Kenntnisse vorhanden sind, kann dies zu

Willkommen �� 20

Warnhinweise zur Sicherheit �� 20

Elektrische Sicherheit ��21

Montageanleitungen �� 22

Beschreibung Abbildung A ��22

Beschreibung Abbildung B ��22

Beschreibung Abbildung C ��22

Beschreibung Abbildung D ��22

Zusätzliche Montagehinweise ��22

Zusätzliche Informationen ��23

Gebrauch �� 23

Einstellen des Stützfußes ��23

Einstellen der Konsole ��23

Einstellen der horizontalen Sitzposition ��24

Einstellen der vertikalen Sitzposition ��24

Einstellen des Handgriffs ��24

Stromzufuhr ��24

Garantie �� 24

Herstellererklärung �� 24

Haftungsausschluss �� 24

Leht laadib ...

Tunturi E50 Manual Concise

Tunturi E50 Manual Concise

teistes keeltes

Seotud paberid

Muud dokumendid