USER MANUAL
Operation Instructions
Constructed with aircraft-grade aluminum
LPE optics
Push/pull focus beam
Enhanced rubber grip
High quality wrist lanyard
Tactical on/o button
IPX4 waterproof rating
Batteries included (3 AAA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
The LP831 has a Limited 30-Day Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to info@simpleproducts.com
Product Warranty
Focusing Universal Flashlight
LP831
3AAA
Batteries
The LP831C uses 3 AAA batteries.
To replace the batteries, turn the tail cap counterclockwise to
remove it. Tip the light downward to slide out the battery case
which contains the batteries. Remove the batteries from the case
and insert new batteries according to the (+/-) symbols found on
the case. For best results, we recommend using brand new
alkaline batteries that are the same voltage and brand.
Re-insert battery case into the ashlight with the arrow on the
battery case pointing down. Re-attach the tail cap by pressing
down lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing
the batteries from the ashlight and storing it in a dry, protected
place.
Low
High
ANSI/PLATO FL1 STANDARD
90 lm
290 lm
LUMENSMODES
13h
2h 30m
RUN TIME
60m
115m
BEAM
DISTANCE
Strobe 290 lm -- --
On/O: Press and release the button on the tail cap to turn the
light on and o.
Cycle Modes: First turn the light on by pressing down the button
on the tail cap completely and releasing. Half-press the button to
cycle through modes (High/Low/Strobe). Turning the ashlight on
and o quickly and repeatedly will also cycle the light through the
three modes.
The light will automatically reset to
high mode when o for longer than
5 seconds.
Focus Head: To focus the light beam,
gently push the head away from the
light to extend it. Pull the head back
towards the light to widen the beam.
-
1
