USER MANUAL
Operation Instructions
Rugged design
BROADBEAM area light, LED ashlight
Dual molded rubber design
360° swivel hook
Magnetic base
Adjustable position stand
IPX4 waterproof rating
Batteries included (3 AA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
The LP366 has a Limited 30-Day Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to info@simpleproducts.com
Product Warranty
LED Handheld Worklight
LP366
3
AA
Batteries Magnetic
High
High
ANSI/PLATO FL1 STANDARD
220 lm
115 lm
LUMENSMODES
3h 30m
8h 10m
RUN TIME
20m
10m
BEAM
DISTANCE
Low 90 lm 6h 5m
Flashlight
Area Light
On/O: Press and release the yellow button on the front of the
work light to turn on and o.
Cycle Modes: Press and release the button repeatedly to cycle
through modes (Flashlight High/Area High/Area Low).
The LP366 uses 3 AA batteries.
To replace the batteries, rst locate the battery access door on the
back of the work light (opposite of the on/o button). Gently
push in the tab on the door and lift to remove it. Remove existing
batteries and insert new batteries according to the (+/-) symbols
in the tubes. For best results we recommend using brand new
alkaline batteries that are the same voltage and brand.
Re-attach the access door by inserting the side with small tabs
rst, then push down gently until the door clicks into place.
If you know it will be a while between uses, we suggest removing
the batteries from the work light and storing it in a dry, protected
place.
-
1
