DVS GSR / 31 DVI Firebacks

96100100 Brick/Herringbone (2 Sided) - 96100272 Handmade Brick -- 96100273 Reclaimed Brick

Page 1 of 2 17601430 - 9/22/10 © Travis Industries, Inc.

Packing List

• Rear Fireback

• (2) Side Firebacks

2-Sided Firebacks

On 2-sided firebacks make sure to use the desired pattern and correct orientation.

NOTE: The rear fireback must be

WARNING Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.

1 Remove the glass frame and logs (see the manual for details).

2 Follow the steps below to install the firebacks (see illustrations on the following page).

a) Remove the burner (see the manual for details).

b) For the DVS GSR bend the accent light down (if installed).

c) Install the rear fireback (see illustration on the following page).

d) Install the side firebacks (see illustration on the following page).

e) For the DVS GSR, return the accent light to the correct configuration.

f) Replace the burner.

3 Restore the appliance to the correct configuration.

DVS GSR / 31 DVI Firebacks

96100100 Brick/Herringbone (2 Sided) - 96100272 Handmade Brick -- 96100273 Reclaimed Brick

Page 2 of 2 17601430 - 9/22/10 © Travis Industries, Inc.

slight angle and

Replace the clip

to secure the