Bilco BD450KT Kasutusjuhend

Kaubamärk
Bilco
Mudel
BD450KT
Tüüp
Kasutusjuhend

See juhend sobib ka

Basement Door Weather-stripping Kit
www.bilco.com
Need Part Number
Experience.Innovation.
Installation Instructions:
The BILCO basement door weather-stripping is supplied on rolls so
that the material can be cut to match the exact dimensions of your
basement door. Simply follow the instructions below for gasket
placement and cut the material to suit your door as instructed.
Step 1 – Installation on Header Flange
Starting on one end as shown in Figure 1, firmly place the “U”
shaped weather-stripping on the header flange, feed to the end of
the flange, and trim as shown.
Step 2 – Installation on Side Panel Flange
Starting on one end as shown in Figure 2, firmly place the “U”
shaped weather-stripping on top of a side panel flange, feed to the
end of the flange, and trim as shown. Repeat on second side panel.
Step 3 – Installation on Left Door Center Flange
Starting on one end as shown in Figure 3, firmly place the “U”
shaped weather-stripping on top of a center flange, feed to the end
of the flange, and trim as shown.
Step 4 – Installation on Door Leaf Bottom Flanges
Starting on one end as shown in Figure 4, firmly place the “BULB”
type weather-stripping on a door leaf bottom flange, feed to the
end of the flange, and trim as shown. Repeat on second door leaf
bottom flange.
Step 5 – Right Door Cap seal Installation
Seals are supplied for installation inside the top and bottom of the
right-hand door leaf cap. Peel off the adhesive backing and firming
place each seal into position on top and bottom as shown in
Figure 5.
Tools Required:
• Tin Snips or Large Scissors
Parts List:
• U-Shaped Gasket (1 roll)
• Bulb Trim Gasket (1 roll)
• Cap Seal Gasket Pads (2)
Left
Door
Center Flange
Side
Panel Flange
Right
Door Cap
Door Leaf Bottom Flanges
Header Flange
Figure 1 – Installation on Header Flange
Figure 2 – Installation on Side Panel Flange
Figure 3 – Installation on Left Door Center Flange
Figure 4 – Installation on Door Leaf Bottom Flanges
Figure 5 – Right Door Cap seal Installation
U-Shaped Gasket Cap Seal PadBulb Trim Gasket
Tired of going inside
to unlock your
basement door?
Install a BILCO keyed entry
lock and save that trip into
the basement. The keyed
lock kit can be installed in
just 30 minutes and is
available for purchase on
www.bilco.com
  • Page 1 1

Bilco BD450KT Kasutusjuhend

Kaubamärk
Bilco
Mudel
BD450KT
Tüüp
Kasutusjuhend
See juhend sobib ka
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid