Braun Thermometer IRT4520 Kasutusjuhend

Kategooria
Digitaalsed keretermomeetrid
Tüüp
Kasutusjuhend

See käsiraamat sobib ka

IRT 4520
IRT 4020
Type 6022
Type 6023
IRT 4520/4020 EK KURTZ DESIGN 12.02.03
ThermoScan
1-800-327-7226
Type: 6022
I / O
mem
6022434_IRT_AP_S1 Seite 1 Donnerstag, 21. September 2006 2:29 14
Braun Infolines
0800 783 70 10
1 800 509 448
+7 495 258 62 70
852-25249377
(Audio Supplies Company Ltd.)
GB
IRL
RUS
HK
English 4
Lietuvi˜
13
Latvie‰u
22
Eesti
31
êÛÒÒÍËÈ
40
49
59
Internet:
www.braun.com
Manufactured by:
Braun GmbH
Frankfurter Str. 145
61476 Kronberg / Germany
6-022-434/00/IX-06/M
GB/LT/LV/EST/RUS/China/ChinaHK
Printed in Germany
6022434_IRT_AP_S2 Seite 1 Donnerstag, 21. September 2006 2:28 14
10
6
5
4
2
1
7
8
3
b
a
IRT 4520
IRT 4020
9
11
1-800-327
-
7
226
Ty p e: 6022
E
x
a
c
T
e
m
p
ThermoScan
ThermoScan
x
a
c
T
e
m
p
I / O
mem
5
4
2
1
3
1-800-327
-
7
226
Ty p e: 6022
start
7
8
9
ThermoScan
x
a
c
T
e
m
p
start
6022434_IRT_AP_S3 Seite 1 Donnerstag, 21. September 2006 2:29 14
4
The Braun ThermoScan thermometer has been carefully developed
for accurate, safe and fast temperature measurements in the ear.
The shape of the thermometer prevents it from being inserted too far
into the ear canal to hurt the eardrum.
However, as with any thermometer, proper technique is critical to
obtaining accurate temperatures. Therefore, read the use
instructions carefully and thoroughly.
Important
The operating ambient temperature range for this thermometer
is 1040 °C (50104 °F).
Do not expose the thermometer to temperature extremes
(below –20 °C / –4 °F or over 50 °C / 122 °F) nor excessive humidity
(> 95 % RH).
This thermometer must only be used with genuine Braun
ThermoScan Lens Filters (LF 40). Never use this thermometer
without a new, clean lens filter attached.
Keep lens filters out of reach of children.
This thermometer is intended for household use only.
Use of this thermometer is not intended as a substitute for con-
sultation with your physician.
How does Braun ThermoScan work?
Braun ThermoScan measures the infrared heat generated by the
eardrum and surrounding tissues. To avoid gross temperature dif-
ferences, the sensor itself is brought to a temperature close to that of
the human body. When the Braun ThermoScan is placed in the ear,
it continuously monitors the infrared radiation. The measurement will
be finished and the result is displayed, when an accurate reading can
be assured.
Why measure in the ear?
The goal of thermometry is to measure core body temperature which
is the temperature of the vital organs. Ear temperatures accurately
reflect core body temperature, since the eardrum shares blood supply
with the temperature control center in the brain, the hypothalamus.
Therefore, changes in body temperature are reflected sooner and more
accurately in the ear than at other sites.
Axillary temperatures only measure skin temperature and therefore,
are not a reliable indicator of core body temperature.
Oral temperatures are influenced by drinking, eating and breathing.
Rectal temperatures lag behind changes in core body temperature
and there is a risk of cross-contamination.
English
6022434_IRT_AP_N Seite 4 Donnerstag, 21. September 2006 2:31 14
5
Body temperature
Normal body temperature is a range. The following table shows
that this normal range also varies by site. Therefore, readings from
different sites should not be directly compared.
As well, a person’s normal temperature range tends to decrease
with age. The following table shows normal ThermoScan ranges
by age.
However, the range of normal also varies from person to person
and fluctuates throughout the day. It is therefore important to deter-
mine your normal temperature range. This is easily done using Braun
ThermoScan. Practice taking temperatures on yourself and healthy
family members to determine their normal temperature ranges.
Note: When consulting your physician, communicate that the
ThermoScan temperature is a temperature measured in the ear and
if possible, note the individual’s normal ThermoScan temperature
range as additional reference.
Normal ranges by site:
Axillary: 34.7 – 37.3 °C 94.5 – 99.1 °F
Oral: 35.5 – 37.5 °C 95.9 – 99.5 °F
Rectal: 36.6 – 38.0 °C 97.9 – 100.4 °F
ThermoScan: 35.8 – 38.0 °C 96.4 – 100.4 °F
Normal ThermoScan ranges by age:
0 – 2 years 36.4 – 38.0 °C 97.5 – 100.4 °F
3 – 10 years 36.1 – 37.8 °C 97.0 – 100.0 °F
11 – 65 years 35.9 – 37.6 °C 96.6 – 99.7 °F
> 65 years 35.8 – 37.5 °C 96.4 – 99.5 °F
6022434_IRT_AP_N Seite 5 Donnerstag, 21. September 2006 2:31 14
6
Product description
1. Lens filter
2. Probe
3. Lens filter detector
4. Lens filter ejector
5. Display
6. «I/O» button
(On/memory function – IRT 4520 only)
7. «ExacTemp» light
8. «start» button
9. Battery door
10. Protective cover (IRT 4520)
11. Cap (IRT 4020)
How to use your Braun ThermoScan?
1. To achieve accurate readings, make sure a new,
clean lens filter (1) is in place before each
measurement.
2. IRT 4020:
Push the «start» button (8).
IRT 4520:
Push the «I/O» button (6).
During an internal self-check, the display shows
all segments. Then the last temperature taken will
be displayed together with «MEM».
Wait for the ready signal beep and the ready
symbol in the display.
3. Fit the probe snuggly into the ear canal, then push
the «start» button (8).
start
IRT 4020
T
e
m
p
a
c
IRT 4520
ThermoScan
E
x
a
c
T
e
n
6022434_IRT_AP_N Seite 6 Donnerstag, 21. September 2006 2:31 14
7
If the probe has been fitted securely into the ear
canal during the complete measuring process,
a long beep will signal the end of the measuring
process. You can be assured to have taken an
accurate temperature reading. The result is shown
on the display (5).
If you take the temperature of another person, the
«ExacTemp» light (7) will be of help. It flashes
during the measuring process as long as the
probe is securely positioned, and lights up con-
tinuously when an accurate reading has been
taken.
4. If the probe has not been constantly placed in a
stable position in the ear canal, a sequence of
short beeps will sound, the «ExacTemp» light will
go out and the display will show an error message
(«POS» = position error).
5. For the next measurement, eject the used lens
filter (push ejector (4)) and put on a new, clean lens
filter.
IRT 4020:
Clear the display by pushing the
«start» button once.
IRT 4520: Clear the display by pushing the
«I/O» button once.
Wait for the ready signal. Fit the probe snuggly
into the ear canal, then push the «start» button.
The Braun ThermoScan ear thermometer turns off
automatically after 60 seconds of inactivity.
The IRT 4520 can also be turned off by pressing
the «I/O» button for at least three seconds.
The display will shortly flash «OFF» and after
releasing the button it will go blank.
Temperature taking hints
The right ear reading may differ from the reading
taken at the left ear. Therefore, always take the
temperature in the same ear.
The ear must be free from obstructions or excess
earwax build-up to take an accurate reading.
External factors may influence ear temperatures,
including when an individual has:
been lying on one ear or the other
had their ears covered
been exposed to very hot or very cold tempera-
tures, or
been recently swimming or bathing.
E
x
a
c
T
e
n
6022434_IRT_AP_N Seite 7 Donnerstag, 21. September 2006 2:31 14
8
In these cases, remove the individual from the
situation and wait 20 minutes prior to taking a
temperature.
Use the untreated ear if prescription ear drops or
other ear medications have been placed in the ear
canal.
Memory mode
The last temperature taken is stored in its memory
and will be automatically displayed when it is turned
on again. The display will show «MEM».
IRT 4520:
This model stores the last 8 temperature readings.
To display the stored readings, the thermometer
must be turned on. Then press the «I/O» button for
at least 1 second. The display shows the memory
number (e. g. MEM 1), and when releasing the
«I/O» button, the stored temperature for that memory
number is displayed, together with «MEM».
If «I/O» button is pressed too long, the thermometer
will be switched off. Each further pressing of the
«I/O» button displays the remaining memory numbers
(up to MEM 8).
MEM 1 is the latest reading, MEM 8 would be the
oldest.
The memory mode is left automatically after
displaying the oldest reading, or after pressing the
«I/O» button for at least 1 second.
Changing the temperature scale
Your Braun ThermoScan is shipped with the Celsius
(°C) temperature scale activated. If you whish to
switch to Fahrenheit (°F) and/or back from Fahrenheit
to Celsius, proceed as follows:
(1) Make sure the thermometer is turned off.
(2) Press and hold down the «start» button (IRT 4020)
or the «I/O» button (IRT 4520). After about 3
seconds the display will show this sequence:
«°C» / «SET» / «°F» / «SET» ...
(3) Release the «start» button / «I/O» button when the
desired temperature scale is shown. There will be
a short beep to confirm the new setting, then the
thermometer is turned off automatically.
6022434_IRT_AP_N Seite 8 Donnerstag, 21. September 2006 2:31 14
9
Care and cleaning
The probe tip is the most delicate part of the
thermometer.
It has to be clean and intact to ensure accurate
readings.
If the thermometer is ever accidentally used without
a lens filter, clean the probe tip as follows:
Very gently wipe the surface with a cotton swab or
soft cloth moistened with alcohol. After the alcohol
has completely dried out, you can put a new lens
filter on and measure.
If the probe tip is damaged, contact Braun.
Use a soft, dry cloth to clean the thermometer display
and exterior.
Do not use abrasive cleaners. Never submerge this
thermometer in water or any other liquid.
Store thermometer and lens filters in a dry location
free from dust and contamination and away from
direct sunlight.
Additional lens filters (LF 40) are available at most
stores carrying Braun ThermoScan or at Braun
Service Centers.
6022434_IRT_AP_N Seite 9 Donnerstag, 21. September 2006 2:31 14
10
Trouble-shooting
Error message Situation Solution
No lens filter is attached. Attach new, clean lens filter.
The thermometer cannot identify
a secure position of the probe.
An accurate measurement was
not possible.
POS = position error
IRT 4020:
Clear the display by
pushing the «start» button once.
IRT 4520: Clear the display by
pushing the «I/O» button once.
Take care that the positioning of
the probe is correct and remains
stable.
Ambient temperature is not within
the allowed operating range
(10 40 °C or 50 104 °F).
Allow the thermometer to remain
in a room for 30 minutes where
the temperature is between
10 and 40 °C or 50 and 104 °F.
Temperature taken is not within
typical human temperature range
(34 42.2 °C or 93.2108 °F).
HI = too high
LO = too low
Make sure a new, clean lens filter
is attached and thermometer is
properly inserted. Then, take a
new temperature.
System error – self-check display
flashes continuously and will not
be followed by the ready beep
and the ready symbol.
If error persists,
If error still persists,
Wait 1 minute until the thermo-
meter turns off automatically, then
turn on again.
... reset the thermometer by re-
moving the batteries and putting
them back in.
… have the thermometer checked
at a Braun Customer Service
Center.
6022434_IRT_AP_N Seite 10 Donnerstag, 21. September 2006 2:31 14
11
Trouble-shooting
Error message Situation Solution
Battery is low, but thermometer
will still operate correctly.
Insert new batteries.
Battery is too low to take correct
temperature readings.
Insert new batteries.
Do you have any further
questions?
Call Braun Infoline,
please see page 2.
Replacing the batteries
The thermometer is supplied with two 1.5 V type AA (LR 06). For best
performance, we recommend Duracell
®
alkaline batteries.
Insert new batteries when the battery symbol appears on the display.
Open the battery compartment. Remove the batteries and replace with
new batteries, making sure the poles are in the right direction.
Slide battery door back until it snaps in place.
To protect the environment, dispose of empty batteries at
your retail store or at appropriate collection sites according to
national or local regulations.
Calibration
The thermometer is initially calibrated at the time of manufacture.
If this thermometer is used according to the use instructions, periodic
re-adjustment is not required. If at any time you question the accuracy
of measurement, please contact Braun Infoline, phone (see page 2).
Manufacturing date is given by the LOT number located in the battery
compartment. The first number after LOT represents the last digit of the
year of manufacture.
The next three digits give the day of the year of manufacture.
An example: LOT 0116 xx xx – this product has been manufactured on
the 116th day of the year 2000.
1
2
T
h
e
r
m
o
S
c
a
n
6022434_IRT_AP_N Seite 11 Donnerstag, 21. September 2006 2:31 14
12
Product specifications
Displayed temperature range: 3442.2 °C (93.2108 °F)
Operating ambient temperature range: 1040 °C (50104 °F)
Display resolution: 0.1 °C or °F
Accuracy for displayed temperature range: ± 0.2 °C (35.542 °C / 95.9107.6 °F)
± 0.3 °C (outside this temperature range)
Clinical repeatability: ± 0.14 °C (± 0.26 °F)
Battery life: 2 years / 1000 measurements
Type BF equipment
Subject to change without notice.
This appliance conforms to the following standards:
DIN EN 60601-1: 3/96 «Medical electrical equipment» –
Part 1: General requirements for safety
DIN EN 12470-5: 2003 «Clinical thermometers« –
Part 5: Performance of infrared ear thermometers (with maximum device)
This product conforms to the provisions of the EC directive 93/42/EEC
(Medical Device Directive).
MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC. For
detailed description of EMC requirements please contact the Braun Infoline (see page 2).
Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL
EQUIPMENT.
Please do not dispose of the product in the household waste at the end of its useful life.
Disposal can take place at a Braun Service Centre or at appropriate collection points
provided in your country.
Guarantee
We grant 2 years guarantee on the product commencing on the date of purchase. Within the
guarantee period we will eliminate, free of charge, any defects in the appliance resulting from
faults in materials or workmanship, either by repairing or replacing the complete appliance as we
may choose.
This guarantee extends to every country where this appliance is supplied by Braun or its
appointed distributor.
This guarantee does not cover: damage due to improper use, normal wear or use as well as
defects that have a negligible effect on the value or operation of the appliance. The guarantee
becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are
not used.
To obtain service within the guarantee period, hand in or send the complete appliance with your
sales receipt to an authorised Braun Customer Service Centre.
For UK only:
This guarantee in no way affects your rights under statutory law.
0297
6022434_IRT_AP_N Seite 12 Donnerstag, 21. September 2006 2:31 14
13
Lietuvi˜
«Braun» termometras «ThermoScan» skirtas tiksliam, saugiam ir
greitam temperatros matavimui ausyje. Termometras specialios
formos, todòl jo ne∞manoma ∞ki‰ti pernelyg giliai ∞ ausies kanalà ir
paÏeisti ausies bgnelio.
Naudojantis bet kokiu termometru ir norint gauti tikslius
temperatros rodmenis, btina laikytis reikiam˜ naudojimosi
instrukcij˜. Todòl pirmiausiai atidÏiai perskaitykite pridedamas
instrukcijas.
Dòmesio
Termometrà galima laikyti 10 – 40 °C (50 – 104 °F) temperatroje.
Nelaikykite termometro ten, kur temperatra netinkama (Ïemesnò
negu –20 °C / –4° F arba auk‰tesnò kaip 50 °C / 122 °F) ir pernelyg
didelis drògnis (daugiau kaip 95 proc. santykinio drògnio).
Termometrà galima naudoti tik su originaliais «Braun» l´‰i˜ filtrais
(LF 40). Niekuomet nesinaudokite termometru be naujo ‰varaus
l´‰i˜ filtro.
Neleiskite vaikams Ïaisti su l´‰i˜ filtrais.
Termometras skirtas tik buitiniam naudojimui.
Termometras neatstoja gydytojo konsultacijos.
Kaip veikia «Braun» termometras «ThermoScan»?
«Braun» termometras «ThermoScan» matuoja infraraudonàjà ‰ilumà,
kurià skleidÏia ausies bgnelis ir ‰alia esantys audiniai. Kad
temperatros skirtumai nebt˜ pernelyg dideli, paties jutiklio
temperatra artima Ïmogaus kno temperatrai. «Braun»
termometras «ThermoScan», ∞ki‰tas ∞ aus∞, nuolatos matuoja
infraraudonàj∞ spinduliavimà. Temperatra baigiama matuoti ir
rezultatas parodomas tada, kai jau galima garantuoti tiksl˜ rodmen∞.
Kodòl temperatrà reikòt˜ matuoti ausyje?
Temperatros matavimo tikslas – i‰matuoti viso kno temperatrà,
kuri parodyt˜ gyvybi‰kai svarbi˜ organ˜ temperatrà. Ausyje
i‰matuota temperatra tiksliai parodo kno temperatrà, nes ausies
bgnelis ir pogumburis (smegen˜ dalis, kontroliuojanti kno
temperatrà) yra tos paãios kraujotakos sistemos dalis. Todòl ausyje
i‰matuota temperatra gerokai greiãiau ir tiksliau parodo kno
temperatrà negu tada, kai ji matuojama kitoje kno vietoje.
PaÏastyje matuojama temperatra parodo tik odos temperatrà,
todòl ji negali bti patikimas viso kno temperatros indikatorius.
Oraliniu bdu matuojamà temperatrà veikia gòrimas, valgymas ir
kvòpavimas.
Temperatros matavimas tiesiojoje Ïarnoje ne taip tiksliai atspindi
kno temperatrà, be to, matuojant temperatrà tokiu bdu
egzistuoja tikimybò uÏsikròsti infekcinòmis ligomis.
6022434_IRT_AP_N Seite 13 Donnerstag, 21. September 2006 2:31 14
14
Kno temperatra
Kiekvienam Ïmogui bdinga sava normali jo kno temperatra. ·ioje
lentelòje matyti, kad temperatra skiriasi ir atsiÏvelgiant ∞ tai, kurioje
kno vietoje ji matuojama. Todòl negalima tiesiogiai lyginti tempera-
tros, i‰matuotos skirtingose kno vietose.
Be to, Ïmogui senstant jo kno temperatra krinta. ·ioje lentelòje
pateiktas termometru «ThermoScan» matuojamos temperatros
diapazonas:
Beje, kiekvieno Ïmogaus normali temperatra bna skirtinga, per
dienà ji svyruoja. Todòl svarbu Ïinoti savo normalios tempera-
tros duomenis. Tai lengvai padarysite su «Braun» termometru
«ThermoScan». Pasimatuokite temperatrà sau ir pamatuokite jà
sveikiems ‰eimos nariams – taip suÏinosite savo normalios
temperatros duomenis.
Pastaba: konsultuodamiesi su gydytoju perspòkite j∞, kad su
termometru «ThermoScan» temperatra matuojama ausyje, ir jeigu
Ïinote, pateikite jam normalios temperatros, pamatuotos ausyje,
duomenis.
Øvairiose kno vietose matuojamos normalios temperatros
diapazonas:
PaÏastyje:
34,7 – 37,3 °C 94,5 – 99,1 °F
Burnoje:
35,5 – 37,5 °C 95,9 – 99,5 °F
Tiesiojoje Ïarnoje:
36,6 – 38,0 °C 97,9 – 100,4 °F
ThermoScan:
35,8 – 38,0 °C 96,4 – 100,4 °F
Normalios ausyje pamatuotos temperatros duomenys
pagal amÏi˜:
0 – 2
metai
36,4 – 38,0 °C 97,5 – 100,4 °F
3 – 10
met˜
36,1 – 37,8 °C 97,0 – 100,0 °F
11 – 65
metai
35,9 – 37,6 °C 96,6 – 99,7 °F
vir‰
65
met˜
35,8 – 37,5 °C 96,4 – 99,5 °F
6022434_IRT_AP_N Seite 14 Donnerstag, 21. September 2006 2:31 14
15
Gaminio apra‰ymas
1. L´‰i˜ filtras
2. Zondas
3. L´‰i˜ filtro detektorius
4. L´‰i˜ filtro eÏektorius
5. Ekranòlis
6. Øjungimo/i‰jungimo mygtukas (atminties
funkcijos ∞jungimas – tik IRT 4520 modelyje)
7. «Tikslios temperatros» lemputò
8. Paleidimo mygtukas
9. Element˜ dangtelis
10. Apsauginis dangtelis (IRT 4520)
11. Dangtelis (IRT 4020)
Kaip naudotis «Braun» termometru
«ThermoScan»?
1. Kad rodmenys bt˜ tiksls, prie‰ kiekvienà
matavimà ∞statykite naujà ‰var˜ l´‰i˜ filtrà (1).
2. IRT 4020
: Paspauskite paleidimo mygtukà (8).
IRT 4520
: Paspauskite ∞jungimo/i‰jungimo
mygtukà (6).
Vidinòs savitikros metu ekranòlyje rodomi visi
segmentai. Paskui kartu su «MEM» rodoma
paskutinò i‰matuota temperatros vertò.
Palaukite, kol pasigirs signalas ir ekranòlyje
pasirodys Ïenklas, rodantis, kad prietaisu galima
naudotis.
3. Patogiai ∞statykite zondà ∞ ausies kanalà ir
paspauskite paleidimo mygtukà (8).
start
IRT 4020
T
e
m
p
a
c
IRT 4520
E
x
a
c
T
e
n
ThermoScan
6022434_IRT_AP_N Seite 15 Donnerstag, 21. September 2006 2:31 14
16
Jeigu zondas taisyklingai ∞statytas ∞ ausies
kanalà, i‰matavus temperatrà pasigirsta ilgas
signalas. Tai rei‰kia, kad gautas tikslus tempera-
tros rodmuo, jis rodomas ekranòlyje (5).
Jeigu matuojate temperatrà kitam Ïmogui, jums
padòs «Tikslios temperatros» lemputò (7). Jeigu
zondas tinkamai ∞statytas ∞ ausies kanalà,
matavimo metu lemputò mirkãioja, o nustaãius
tikslià temperatrà dega nuolatos.
4. Jeigu zondas netaisyklingai ∞statytas ∞ ausies
kanalà arba matavimo metu sujudòjo, pasigirsta
trumpi garso signalai, uÏg´sta «Tikslios
temperatros» lemputò, o ekranòlyje pasirodo
prane‰imas apie klaidà («POS» = klaidinga
padòtis).
5. Jeigu matuosite temperatrà kitam Ïmogui,
i‰imkite l´‰i˜ filtrà (spustelkite eÏektori˜ (4)) ir
∞statykite naujà ‰var˜ l´‰i˜ filtrà.
IRT 4020:
vienà kartà paspauskite paleidimo
mygtukà, kad i‰nykt˜ ekranòlyje
rodomas uÏra‰as.
IRT 4520: vienà kartà paspauskite ∞jungimo/
i‰jungimo mygtukà, kad i‰nykt˜
ekranòlyje rodomas uÏra‰as.
Palaukite, kol pasigirs signalas apie prietaiso
pasirengimà matuoti temperatrà. Patogiai
∞statykite zondà ∞ ausies kanalà ir paspauskite
paleidimo mygtukà.
Po 60 sek. «Braun» termometras «ThermoScan»
i‰sijungia automati‰kai, jeigu juo nesinaudojama.
IRT 4520 model∞ galima i‰jungti 3 sek. spaudÏiant
∞jungimo/i‰jungimo mygtukà.
Ekranòlyje trumpam pasirodo uÏra‰as I‰jungtas
(«OFF»), jis uÏg´sta atleidus mygtukà.
Patarimai dòl temperatros matavimo
De‰inòs ausies rodmenys gali skirtis nuo kairòs
ausies rodmen˜. Todòl temperatrà visada
matuokite toje paãioje ausyje.
Ausis turi bti ‰vari, joje neturi bti susikaupusios
sieros.
E
x
a
c
T
e
n
6022434_IRT_AP_N Seite 16 Donnerstag, 21. September 2006 2:31 14
17
Temperatrai ∞takos gali turòti i‰oriniai veiksniai,
∞skaitant ir tai, kad:
Îmogus gulòjo ant vienos ar kitos ausies,
buvo uÏsideng´s ausis,
buvo labai ‰iltoje ar ‰altoje aplinkoje,
neseniai plaukiojo arba maudòsi.
Tokiais atvejais prie‰ matuojant temperatrà
reikia palaukti 20 min.
Jeigu ∞ ausies kanalà buvo la‰inami aus˜ la‰eliai
ar kiti aus˜ vaistai, temperatrà matuokite kitoje
ausyje.
Prietaiso atminties reÏimas
Paskutinio temperatros matavimo duomenys
saugomi prietaiso atmintyje, ∞jungus prietaisà jie
parodomi automati‰kai. Ekranòlyje bna uÏra‰as
«MEM».
IRT 4520
:
·io modelio prietaisas atmintyje saugo 8 paskutini˜
temperatros matavim˜ duomenis.
Jeigu norite pamatyti atmintyje saugomus
duomenis, ∞junkite termometrà. Paskui 1 sek.
spauskite ∞jungimo/i‰jungimo mygtukà. Ekranòlyje
bus parodytas atmintyje saugom˜ duomen˜
skaiãius (pvz., «MEM 1»), o atleid´ ∞jungimo/
i‰jungimo mygtukà pamatysite ir atmintyje saugomà
temperatrà kartu su uÏra‰u «MEM». Jeigu
∞jungimo/i‰jungimo mygtukà spausite pernelyg ilgai,
termometras i‰sijungs.
Taip spaudant ∞jungimo/i‰jungimo mygtukà galima
pamatyti visus 8 atmintyje saugomus temperatros
duomenis. I‰ a‰tuoni˜ saugom˜ atmintyje duomen˜
«MEM 1» yra paskutinis, o «MEM 8» – pats
seniausiais.
Atminties reÏimas duomenis i‰saugo automati‰kai
po to, kai parodomas seniausias atmintyje
saugomas temperatros rodmuo arba 1 sek.
paspaudus ∞jungimo/i‰jungimo mygtukà.
6022434_IRT_AP_N Seite 17 Donnerstag, 21. September 2006 2:31 14
18
Temperatros skalòs keitimas
Jums pristatomas «Braun» termometras
«ThermoScan» veikia pagal Celsijaus (°C)
temperatros skal´. Jeigu noròsite jà pakeisti ∞
Farenheito (°F) skal´ arba vòl gr∞Ïti ∞ Celsijaus skal´,
darykite taip:
(1)
Øjunkite termometrà.
(2)
Paspauskite ir laikykite paspaustà mygtukà
«start» (modelis IRT 4020) arba mygtukà «I/O»
(modelis 4520). MaÏdaug po 3 sek. ekranòlyje
pasirodys uÏra‰ai, kuri˜ seka tokia:
«°C» / «SET» / «°F» / «SET» ...
(3)
Kai pasirodys reikiama temperatros skalò,
paleisties arba dviej˜ padòãi˜ mygtukà atleiskite.
Pasigirs trumpas signalas, patvirtinantis, kad
nustatyta nauja skalò, paskui termometras
automati‰kai i‰sijungs.
PrieÏira ir valymas
Zondo antgalis yra pati jautriausia termometro dalis.
Jis visada turi bti ‰varus ir sveikas – tik taip galima
garantuoti tiksl˜ temperatros matavimà.
Jeigu netyãia pasinaudojote termometru be l´‰i˜
filtro, zondo antgal∞ valykite taip:
Pavir‰i˜ labai atsargiai nuvalykite medvilnine ar kita
mink‰ta ‰luoste, suvilgyta spiritu. I‰garavus spiritui
bus galima dòti naujà l´‰i˜ filtrà ir matuoti tempe-
ratrà.
Jeigu zondo antgalis suged´s, kreipkitòs ∞ «Braun».
Termometro ekranòl∞ ir kitus pavir‰ius valykite
mink‰ta ir sausa ‰luoste. Termometro negalima
merkti ∞ vanden∞ ar kità skyst∞.
Laikykite termometrà ir l´‰i˜ filtrus sausoje ir
‰varioje vietoje, atokiau nuo tiesiogini˜ saulòs
spinduli˜.
Papildom˜ l´‰i˜ filtr˜ galima ∞sigyti beveik visose
parduotuvòse, kuriose prekiaujama «Braun»
termometrais «ThermoScan» arba «Braun» klient˜
aptarnavimo centruose.
6022434_IRT_AP_N Seite 18 Donnerstag, 21. September 2006 2:31 14
19
Gedim˜ paie‰ka ir ‰alinimas
Klaidos
prane‰imas
Kas atsitiko Kà daryti
Ne∞statytas l´‰i˜ filtras. Østatykite naujà ‰var˜ l´‰i˜ filtrà.
Termometras nenustato
tinkamos zondo padòties.
Ne∞manoma tiksliai pamatuoti
temperatros.
POS = padòties klaida
IRT 4020:
vienà kartà spustelkite
paleidimo mygtukà, kad i‰nykt˜
ekranòlyje rodomas uÏra‰as.
IRT 4520: vienà kartà spustelkite
∞jungimo/i‰jungimo mygtukà, kad
i‰nykt˜ ekranòlyje rodomas
uÏra‰as.
Nepamir‰kite, kad zondas turi bti
∞statytas taisyklingai ir nejudòti.
Aplinkos temperatra neatitinka
nustatyto diapazono.
(10–40 °C arba 50–104 °F)
30 min. palaikykite termometrà
kambaryje, kur temperatra yra
10–40 °C arba 50–104 °F.
Pamatuota temperatra
neatitinka ∞prasto Ïmogaus kno
temperatros diapazono
(34–42,2 °C arba 93,2–108 °F)
HI = pernelyg auk‰ta
LO = pernelyg Ïema
Patikrinkite, ar tinkamai ∞statytas
naujas ‰varus l´‰i˜ filtras. Paskui
temperatrà pamatuokite dar
kartà.
Sistemos klaida – nuolat bliksi
savitikros rodmuo, parengties
signalo negirdòti, parengties
simbolis nepasirodo.
Jeigu klaida nei‰nyksta,
Jeigu ir dabar klaida nei‰nyksta,
1 min. palaukite, kol termometras
automati‰kai i‰sijungs ir vòl j∞
∞junkite.
...i‰imkite i‰ termometro
elementus ir vòl ∞statykite.
... termometrà turi patikrinti
«Braun» klient˜ aptarnavimo
centras.
6022434_IRT_AP_N Seite 19 Donnerstag, 21. September 2006 2:31 14
20
Gedim˜ paie‰ka ir ‰alinimas
Klaidos
prane‰imas
Kas atsitiko Kà daryti
Nors elementas ir i‰sikrov´s,
termometras veikia tiksliai.
Østatykite naujus elementus.
Elementas yra pernelyg
i‰sikrov´s, kad galòt˜ tiksliai
i‰matuoti temperatrà.
Østatykite naujus elementus.
Kaip pakeisti elementus
Termometras bna su dviem 1,5 V AA tipo elementais (LR 06).
Rekomenduojame naudoti «Duracell
®
» ‰arminius elementus.
Elementus keiskite tada, kai ekranòlyje pasirodys elemento simbolis.
Atidarykite element˜ skyrel∞. I‰imkite elementus ir pakeiskite juos
naujais – Ïiròkite poli‰kumo. UÏdarykite element˜ skyrelio dangtel∞.
Saugokite aplinkà – tu‰ãius elementus i‰meskite pagal ‰alies
arba vietos nurodymus.
Kalibravimas
Termometras pirmiausia kalibruojamas gamybos metu.
Jei termometras naudojamas pagal naudojimo instrukcijas,
periodi‰kai jo reguliuoti i‰ naujo nereikia. Jei jums kilt˜ abejoni˜ dòl
matavimo tikslumo, pra‰ome kreiptis ∞ «Braun Infoline» informacin´
tarnybà telefonu.
Gamybos datà rodo partijos numeris maitinimo element˜ skyrelyje.
Pirmasis skaitmuo po partijos numerio yra gamybos met˜ paskutinis
skaitmuo.
Kiti trys skaitmenys rodo gamybos met˜ dienà.
Pavyzdys: PARTIJA 0116 xx xx – ‰is gaminys pagamintas 2000-˜j˜
met˜ 116-à dienà.
1
2
T
h
e
r
m
o
S
c
a
n
6022434_IRT_AP_N Seite 20 Donnerstag, 21. September 2006 2:31 14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86

Braun Thermometer IRT4520 Kasutusjuhend

Kategooria
Digitaalsed keretermomeetrid
Tüüp
Kasutusjuhend
See käsiraamat sobib ka

teistes keeltes