Philips MG7770/15 Kasutusjuhend

MG7770

1MM

2MM

3-7MM

BODY 5MM

BODY 3MM

4MM

9MM

12MM

16MM

9 10

7 8

2

3

1

6

5

1312

1817

2119 20

11

161514

4

22

23

25

24

empty page before TOC

English 6

Čeština 24

Eesti 43

Hrvatski 62

Latviešu 81

Lietuviškai 100

Magyar 119

Polski 139

Română 160

Shqip 179

Slovenščina 197

Slovensky 215

Srpski 235

Български 252

Македонски 274

Русский 294

Українська 314

Қазақша

333

English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

General description (Fig. 1)

1 Full-size hair trimmer

2 On/off button

3 Battery status indicator

4 Socket for small plug

5 Body shaver

6 Skin protector

7 Extra-wide hair trimmer

8 Precision trimmer

9 Precision shaver

10 Nose trimmer

11 Hair comb wide 5/32in. (4mm)

12 Hair comb wide 3/8in. (9mm)

13 Fading hair comb 5/32in.-3/8in. (4-9mm)

14 Hair comb wide 15/32in. (12mm)

15 Hair comb wide 21/32in. (16mm)

16 Fading hair comb 5/32in.-3/8in. (4-9mm)

17 Body comb 1/8in. (3mm)

18 Body comb 3/16in. (5mm)

19 Stubble comb 3/64in. (1mm)

20 Stubble comb 5/64in. (2mm)

21 Adjustable comb (3-7mm)

22 Supply unit

23 Small plug

24 Cleaning brush

25 Pouch

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

6

English

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry.

Warning

- To charge the battery, only use the

detachable supply unit (HQ8505) provided

with the appliance.

- The supply unit contains a transformer. Do

not cut off the supply unit to replace it with

another plug, as this causes a hazardous

situation.

7

English

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

the hazards involved. Children shall not play

with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

- Always unplug the appliance before you

clean it under the tap.

- Always check the appliance before you use

it. Do not use the appliance if it is damaged,

as this may cause injury. Always replace a

damaged part with one of the original type.

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the charging

stand in water and do not rinse

it under the tap.

8

English

- Never immerse the appliance in

water. Do not use the appliance

in the bath or shower.

- Never use water hotter than

60°C to rinse the appliance.

- Only use this appliance for its

intended purpose as shown in

the user manual.

- For hygienic reasons, the

appliance should only be used

by one person.

- Do not use the supply unit in or

near wall sockets that contain

an electric air freshener to

prevent irreparable damage to

the supply unit.

- Never use compressed air,

scouring pads, abrasive

cleaning agents or aggressive

liquids such as petrol or

acetone to clean the appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

9

English

General

- This appliance can be safely cleaned under the

tap.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

- Maximum noise level: Lc = 69dB(A)

Charging

Battery status indications

- When the battery is almost empty, the battery

status indicator flashes orange.

- When the appliance is charging, the battery

status indicator flashes white slowly.

- During quick charge, the battery status indicator

flashes white. After approx. 5 minutes of

charging, the appliance contains enough power

for one cordless trimming session.

- When the battery is fully charged, the battery

status indicator lights up white continuously.

Note: After approx. 30 minutes, the light goes out

automatically.

Charging

Charge the appliance before you use it for the first

time and when the display indicates that the

battery is almost empty. When the appliance has

10

English

charged for 3 hours, it has a cordless operating

time of up to 5 hours.

1 Make sure the appliance is switched off.

2

1

2 Insert the small plug into the appliance and put

the supply unit in the wall socket.

3 After charging, remove the supply unit from the

wall outlet and pull the small plug out of the

appliance.

Quick charge

After approx. 5 minutes charging, the appliance

contains enough power for one cordless trimming

session.

Using the appliance

Note: This appliance can only be used without

cord.

Note: Switch off and clean the appliance after each

use.

Detaching and attaching cutting elements

1 To detach a cutting element, push upwards

against the teeth of the cutting element and

take it off the handle.

1

2

2 To attach a cutting element, insert the lug of the

cutting element into the guiding slot at the front

and push the back of the cutting element onto

the appliance ('click').

11

English

Detaching the precision shaver and nose

trimmer

1 Place your finger on the arrow at the back of

the attachment and push it off the handle in the

direction of the arrow.

Attaching and detaching combs

1

2

1 To attach any type of guard onto a cutting

element, slide the front part of the guard onto

the teeth of the cutting element. Then push

down the center of the guard with your fingers

or the palm of your hand ('click').

2 To detach any type of comb from the cutting

element, carefully pull its back part off the

appliance and then slide it off the cutting

element.

Note: When trimming for the first time, start by

using the comb with the maximum trimming

length setting to familiarize yourself with the

appliance.

Switching the appliance on and off

Press the on/off button once to turn the appliance

on or off.

Attachments for use on beard

Full-size hair trimmer

Use the full-size hair trimmer without a comb to

trim hair close to the skin (to a length of 1/32in

12

English

(0.5mm) or to create clean lines around your

beard, neck and sideburns.

1 To trim hair close to the skin, place the flat side

of the cutting element against your skin and

make strokes against the direction of hair

growth.

2 For contouring, hold the cutting element

perpendicular to the skin and move it upwards

or downwards with gentle pressure.

Beard combs

Attach a beard comb to the full-size hair trimmer

to trim your beard and moustache evenly. The

appliance comes with 5 beard combs. The hair

length settings are indicated on the combs. The

settings correspond to the remaining hair length

after trimming.

Comb inch mm

Stubble comb 3/64in. 1mm

Stubble comb 5/64in. 2mm

Adjustable beard

comb

1/8in.- 9/32in. 3mm-7mm

1 Attach the comb to the full-size hair trimmer.

= mm

2 Adjustable comb: Push the length selector to

the left or right to select the desired hair length

setting.

13

English

3 To trim the most effective way, move the comb

against the direction of hair growth. Make sure

the surface of the comb always stays in contact

with the skin.

Attachments for use on body

- Use the green body combs to trim body hair.

- When you trim for the first time, use the

5mm/3/16in. body comb to familiarize yourself

with the appliance.

- Make sure hair is clean and dry as wet hair

tends to stick to the body.

- When trimming sensitive areas, always use a

body comb.

- Since all hairs do not grow in the same

direction, you may want to try different

trimming positions (i.e. upwards, downwards, or

across). Practice is best for optimum results.

- Always make smooth and gentle movements

and be sure the surface of the comb always

stays in contact with your skin.

- When too many hairs have accumulated on the

appliance, blow the hairs out before use, for

best trimming results.

Body combs

Attach a body comb to the full-size hair trimmer to

trim hairs below the neckline. The appliance comes

with 2 body combs. The hair length settings are

indicated on the combs. The settings correspond

to the remaining hair length after trimming.

Comb inch mm

Body comb (green) 1/8in. 3mm

Body comb (green) 3/16in. 5mm

14

English

1 Attach a body comb to the full-size hair

trimmer.

2 To trim in the most effective way, stretch the

skin with your free hand and move the comb

against the direction of hair growth. Make sure

the surface of the comb always stays in contact

with the skin.

Body shaver

Attach the body shaver to the appliance, to shave

hairs below the neckline such as your armpits and

chest. Only use the body shaver with the skin

protector.

1 Attach the body shaver to the appliance.

2 Attach the skin protector to the full-size hair

trimmer.

3 To shave in the most effective way, stretch the

skin with your free hand and move the shaver

against the direction of hair growth. Make sure

the surface of the shaver always stays in full

contact with the skin.

Attachments for use on head

Extra-wide hair trimmer

Use the extra-wide hair trimmer without a comb to

clip the hair on your head very close to the skin

(1/32in (0.5mm) or to contour the neckline and

area around the ears.

1 To contour the hairline around the ears, comb

the hair ends over the ears.

15

English

2 Tilt the appliance in such a way that only one

edge of the cutter blades touches the hair ends

when you shape the contours around the ears.

3 To contour the nape of the neck or sideburns,

turn the appliance and make downward

strokes.

4 Move the appliance slowly and smoothly

following the natural hairline.

Full-size hair trimmer

Use the full-size hair trimmer without a comb to

clip the hair on your head very close to the skin

(1/32in (0.5mm) or to contour the neckline and

area around the ears.

1 To contour the hairline around the ears, comb

the hair ends over the ears.

2 Tilt the appliance in such a way that only one

edge of the cutter blades touches the hair ends

when you shape the contours around the ears.

3 To contour the nape of the neck or sideburns,

turn the appliance and make downward

strokes.

4 Move the appliance slowly and smoothly

following the natural hairline.

Hair combs wide

Attach a wide hair comb to the extra-wide hair

trimmer to evenly trim the hairs on your head. The

appliance comes with 4 wide hair combs. The hair

length settings are indicated on the combs. The

settings correspond to the remaining hair length

after trimming.

Comb inch mm

Hair comb 5/32in. 4mm

16

English

Hair comb 3/8in. 9mm

Hair comb 15/32in. 12mm

Hair comb 21/32in. 16mm

1 Attach a comb to the extra-wide hair trimmer.

2 Move the trimmer slowly over the crown from

different directions to achieve an even result.

Make sure the surface of the comb always stays

in contact with the skin.

-

Always move the trimmer against the

direction of hair growth. Press lightly.

-

Make overlapping passes over the head to

ensure that all hair that should be cut has

been cut.

Fading hair comb

Attach the fading hair combs to the extra-wide hair

trimmer to trim the hair around the ears with a

faded result. The appliance comes with 2 combs.

Use both combs to trim hair around both ears.

Choose a hair comb based on the preferred

trimming direction of back to front or front to back.

Always make sure that you hold the side of the

comb with the short teeth closest to your ear.

Comb inch mm

Fading hair combs 5/32in.-3/8in. 4-9mm

1 Attach the comb to the extra-wide hair trimmer

to trim the hair around the ear. Then attach the

other comb to trim the hair around the other

ear.

17

English

2 Place the appliance on your hair at the back or

front of your ear, depending on the trimming

direction you prefer. Always make sure that the

side of the comb with the short teeth is closest

to your ear.

3 Move the trimmer slowly around the ear, while

holding it steady. For best results, move the

trimmer against the direction of hair growth

(back to front).

Precision attachments for use on face

Precision trimmer

Use the precision trimmer to create fine lines and

contours around your facial style, close to the skin

(to a length of 1/32in./0.5mm).

1 Hold the precision trimming head perpendicular

to the skin and move the trimming head

upwards or downwards with gentle pressure.

Nose trimmer

Use the nose trimmer to trim your nose hair and

ear hair.

- Make sure nasal passages are clean. Make sure

outer ear channels are clean and free from wax.

- Do not insert the tip more than 3/16in./5mm.

- Always clean the attachment after each use.

Trimming nose hair

1 Gently move the tip in and out of nose while

turning it around to remove unwanted hairs.

18

English

Trimming ear hair

1 Slowly move the tip round the ear to remove

hairs that stick out beyond the rim of the ear.

2 Gently move the tip in and out of the outer ear

channel to remove unwanted hairs.

Precision shaver

Use the precision shaver after trimming, to shave

unwanted hairs on cheeks, chin and along the

beard with precision. Make sure to pre-trim your

beard first, with the full-size hair trimmer without

comb, to obtain the best result.

Note: Use the precision shaver to remove

remaining hairs and detailing your beard style. It is

not suitable for a full face shave.

1 Gently press the precision shaver onto the skin

and shave along contoured edges to remove

any unwanted hairs.

Cleaning

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as gasoline or

acetone to clean the product.

Never dry the trimmer teeth with a towel or

tissue, as this may damage the trimmer teeth.

After every use: cleaning under the tap

1 Turn off the appliance and disconnect from the

wall socket.

2 Remove any comb or cutting element from the

appliance.

3 Rinse the hair chamber under a warm tap.

19

English

4 Clean the cutting element and comb under a

warm tap.

5 Carefully shake off excess water and let all parts

air dry completely.

Thorough cleaning

1 Turn off the appliance and disconnect from the

wall socket.

2 Wipe the handle of the appliance with a dry

cloth.

3 Remove any comb or cutting element from the

appliance.

4 Remove any hairs that have accumulated in the

hair chamber with the cleaning brush supplied.

5 Remove any hairs that have accumulated in the

cutting elements and/or combs with the

cleaning brush supplied.

6 Clean the cutting elements under a warm tap.

7 Clean the combs under a warm tap.

8 Carefully shake off excess water and let all parts

air dry completely.

Cleaning the nose trimmer

Clean the nose trimmer immediately after use and

when a lot of hair or dirt has accumulated on the

nose trimmer head.

1 Rinse the nose trimmer head with hot water.

2 Turn on the appliance and rinse the nose

trimmer head once more to remove any

remaining hairs. Then turn off the appliance

again.

For a thorough clean, immerse the nose trimmer

head in a bowl with warm water for a few minutes

20

English

Leht laaditakse ...

Philips MG7770/15 Kasutusjuhend

Philips MG7770/15 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid