SkyLink HU-100 Kasutusjuhend

Tüüp
Kasutusjuhend
Quick Guide
iPhone not included
Internet Hub
Model: HU-100
1. Package Contents
Internet Hub
Power Adapter
Ethernet Cable
NOTE: 4 x AAA-Batteries required in the Internet Hub for backup power.
2. Install the Internet Hub
1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.
2. Plug in the Power Adapter.
3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)
3. Download the SkylinkNet App
2. Tap on Search Icon and
search for “SkylinkNet”
3. Tap on Free Button
to download the App.
1. Tap on App Store
NOTE: Only the “SkylinkNet App will work with
the Internet Hub.
4. When download is
completed, it will show on
your Home Screen.
4. Create a SkylinkNet Account
.
2. Enter your information and
tap on “Sign Up.
1. Open the SkylinkNet App and
tap on “Create Account”.
3. Check your email to activate
your account and tap on
“Continue” to log in.
4. Click on the link from the email to activate your account. 5. Now you are ready to
login to your account
5. Set up the Internet Hub
1. Tap on “Set up Hub”. 2. Tap on “Initialize a
new Hub”.
3. Follow the instruction on
screen to connect the
Internet Hub.
4. Enter your information and
tap on “Continue”.
5. Follow the instruction on screen
to reset the Internet Hub and tap
“Continue”.
6. Hub is added and you will see a
green or red dot indicating if it’s
connected to the Hub.
6. Setup Hub Keypad Password 8. Add Sensors and Keychain Remote (Sold Separately)
NOTE: If motion is detected, a
red led light inside the sensor
will flash. Sensor will not be
triggered by new motion
unless no motion has been
detected for 15 seconds.
1. Go to “More” and tap on
“System settings”.
2. Tap on “Setup Wizard”. 3. Tap on “Add Device”. 4. Tap on “Sensors” or
“Security Remote”.
8. Now trigger the
sensors to test if the
SkylinkNet App is
showing the sensor
status correctly.
5. Select the type of
sensor you want to
add.
6. Name your sensor
and location and tap
“Continue”.
7. Tap the “Learn Now”
button and follow the video
to activate the sensor.
Email
Email
1. Go to “More”. 2. Tap on “System Settings”. 3. Tap on ”Hub Keypad
Password”.
4. Enter Passcode and
tap on “Save”.
7. Setup Time Zone
1. Go to “More”. 2. Tap on “System Settings”. 3. Tap on “Time Settings”. 4. Set your time zone
and tap on “Save.
TC-318-7
9. Add HomeControl Receiver (Sold Separately)
1. Go to “More” and tap on
“System settings”.
2. Tap on “Setup Wizard”. 3. Tap on “Add Device”. 4. Tap on “Lighting” or
Appliances”.
5. Name your “Lighting”
or “Appliances”; then,
location and tap
“Continue”.
6. To add the device now, put the
device into Learn Mode, then
press “Learn Now”. If you are
not certain how to put the
device into Learn Mode, refer to
the manual of the device.
7. Tap the “Learn Now” button
Learning Mode
Settings
Push Notication
Online/Oine
Sensors
Receivers
Menu Bar
Sensor activation
The blue sensor icons will
turn red if its activated.
Receive push notification anytime a
new activity takes place.
Settings for individual sensor,
remote or receiver.
Shows the hub name
and connection.
.
Sensors icons
are blue/red.
10. Home Screen Overview
Choose between
different screens.
Push icons
are black.
11. Sensor Settings
Alarm Settings
Push Notication
Chime
Learn
Rename
Delete
Change the name of this sensor.
Delete this sensor from the hub.
(Learn the sensor if you have selected
“Learn Later” in Step 8 of “Add Sensors
and Keychain Remote).
Tap on the gear
icon to edit the
settings of this
specic sensor.
Select when this sensor
should activate an alarm.
Select if you want to
receive a push notification
during an alarm only or
always when a sensor is
activated.
If enabled, the Internet
hub will sound an alert
chime when this sensor is
activated.
Learn the sensor with the
Internet hub.
12. Alarm Screen Overview
Status of the
Alarm System
Arm Home,
Arm Away / Exit Delay
Slide to activate
the hub siren in
emergency.
13. Arm Home / Arm Away
Arm Home Arm Away / Exit Delay
Select “Arm Home” to protect while
you’re at home. This mode
deactivates motion sensors but
leaves other sensors activated.
Select “Arm Away” to protect your home when you’re away. This mode
activates or triggers the alarm after a default set of time, giving you
enough time to get in and out of your house to arm/disarm the alarm
system.
14. Disarm Alarm System
When an alarm is activated, a push
notication will be sent to all users
and your smartphone will play an
alarm sound.
Tap the “Disarm Button to disarm the
alarm system.
15. Keychain Remote
Arm Away
Arm Home
Disarm
Panic Button
Press and hold the Panic Button
for 5 sec. to activate it.
Arm and disarm
the alarm system
with a keychain
remote.
16. Event Log
3. Tap on “Event Log”2. Tap on “System Settings”1. Go to “More”:
See all the recent
actvities of the
Alarm System on
the Event Log.
One Year Warranty / Customer Service
This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of
purchase. If this product is defective, call 1-800-304-1187 for repair or replacement parts. Guarantee does not
include normal wear and tear or batteries.
If you have any questions, problems or missing parts,
please call Skylink Customer Support:
1-800-304-1187
9:00am – 5:00pm EST, Monday-Friday
Or e-mail us at support@skylinkhome.com
www.skylinkhome.com
P/N:101Y246
  • Page 1 1
  • Page 2 2

SkyLink HU-100 Kasutusjuhend

Tüüp
Kasutusjuhend

teistes keeltes