Etekcity 817915023167 Kasutusjuhend

Tüüp
Kasutusjuhend
HEAVY-DUTY
DIGITAL GAUGE WITH BACKLIGHT
IMPORTANT:Please read this manual carefully before using this
tire gauge and save it for reference.
READ ALL THE FOLLOWING NOTES IN THIS MANUAL. PLEASE HEED ALL
WARNINGS MENTIONED, EVEN IF YOU ARE FAMILIAR WITH HANDLING
ELECTRONIC DEVICES. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE
REFERENCE.
Tire Care And Safety
Product Description
Specifications
Package Contents
A Safer Drive - Properly inflated tires help improve vehicle handling,
steering and braking because they allow more tread to make contact with
the road.
Tire Integrity - Under-inflated tires reduce tire tread life.
Fuel Economy - Under-inflated tires increase fuel consumption, resulting
in greater spending.
Go Green - Properly inflated tires help the wheels turn more easily, which
improves fuel efficiency and even the life of your tires.
Warnings
Know Your Tire Gauge
Operation
Maintenance
Checking Your Tire Pressure
The manufacturer-recommended PSI for the tires is located on the vehicle
placard.
Tire pressure is affected by temperature. Asa result, for accuracy, it is best
to check your tire pressure when the tire is cold or the vehicle has not been
driven for a while.
Building on better living.Building on better living.Building on better living.
Building on better living. Building on better living.
This tire gauge is designed for momentary use only. It is not waterproof,
and prolonged use in the rain or snow should be avoided.
Nozzle
LCD display
Power button
Durable rubber-grip handle
Range: 0 - 230PSI
Operating Temperature:-5 to 50"C (23°F-122°F)
Power: 2 x AAA batteries
1 x Etekcity digital tire gauge
2 x 1.5V AAA batteries
Operating Instructions
Press the "ON/AUTO-OFF" button. Wait for "0.0" PSI or "0.00" Bar or
"0" KPA display and beep sound.
Place the nozzle of the gauge over the tire valve. Press firmly to ensure
good seal and prevent air from escaping. Hold gauge on the valve until the
reading on the LCD display locks.
Remove the gauge quickly from the valve and read pressure.
To retake the reading, simply place the nozzle over the tire valve again
and repeat.
Gauge will automatically shut off 20 or 60 seconds after use. Gauge can
be manually turned off by holding the "ON" button down for more than
three seconds.
Inflate
Cleaning
Storage
Replacing The Battery
Battery Disposal
If the gauge reads a lower pressure than what is recommended on the
placard, you should inflate the tire accordingly
NOTE:
Only use the gauge to measure tire pressure when the vehicle is in park.
Clean the nozzle by wiping it with a soft, clean, dry cloth. Do not expose the
gauge to direct sunlight. Do not use in wet conditions.
Remove the batteries cover " " located on the rear of the gauge handle.
Insert 2x AAA batteries
Place the battery cover back in position.
To protect the environment, the battery should be disposed of properly once
it is no linger of use.
NOTE:
For safety and reliability, do not mix a new battery with an old one.
Store the gauge in a dry, clean area. Avoid high humidity.
Avoid humidity and extreme cold, as prolonged exposure will affect the
accuracy of the gauge.
Environmental Concerns
Should your tire gauge need replacement after extended use, do
not dispose of it with domestic waste. Dispose of it in an
environmentally safe way. Used electronic products should not
be disposed of with household waste. Please recycle where
facilities exist.
1 Year Warranty by Etekcity
Etekcity warrants all products to be of the highest quality in material,
craftsmanship and service for a minimum of 1 year, effective from the date
of purchase. Should you encounter any issues or have any questions
regarding your new product, feel free to contact our helpful Customer
Support
Team. Your satisfaction is ours!
TEL: (855) 686-3835
Email: support@etekcity.com
When checking your tire pressure, you should be mindful of the following:
  • Page 1 1

Etekcity 817915023167 Kasutusjuhend

Tüüp
Kasutusjuhend

teistes keeltes