Poly SoundPoint IP 500 Kasutusjuhend

Bränd: Poly

Mudel: SoundPoint IP 500

Tüüp: Kasutusjuhend

USER GUIDE

VoiceStation™ 500

User Guide

VoiceStation™ 500 - Contents

Contents

Introduction ..................................................................3

Parts List ......................................................................3

For Best Performance ..................................................3

Installing VoiceStation™ 500 .......................................4

Using VoiceStation™ 500 .............................................5

Using Bluetooth Audio .................................................8

Bluetooth Dialing Sequences ......................................13

Wired Audio Mode via 2.5mm Jack.............................14

Maintenance ................................................................17

Troubleshooting ..........................................................17

Polycom Limited Warranty ..........................................18

Limitation of Liability ..................................................18

US and Canada Regulatory

and Compliance Information ...................................19

Exhibit J - Customer Information ...............................21

VoiceStation™ 500 Specications ..............................23

VoiceStation™ 500 - 3

Introduction

Parts List

Thank you for choosing Polycom’s

VoiceStation™ 500. VoiceStation™ 500

uses Polycom’s unique Acoustic Clarity

Technology to provide clear, full-duplex,

two-way voice communication for your

meetings. In addition, VoiceStation™

500 adapts dynamically to the room

environment to eliminate echoes and

clipping. Three built-in microphones pick

up sound all around the room so you can

speak naturally and be easily understood.

Please review this User Guide before

using the phone. Save this User Guide for

future reference.

Please take a moment now to complete

and mail your VoiceStation™ 500

registration card, or register online at

www.polycom.com.

Note: Refer to Quick Start Guide

for additional information.

VoiceStation™ 500 - 4

For Best Performance

► Place VoiceStation™ 500 in the center of a

table or desk.

►Locate VoiceStation™ 500 in a room with

soft furnishings such as carpets, curtains,

and sound-absorbing walls and ceilings.

► Keep papers and other objects away from

your VoiceStation™ 500.

►Speak at normal volume.

►Speak toward your VoiceStation™ 500.

Installing VoiceStation™ 500

1. Connect one end of the long console cable

to the bottom of the phone.

2. Insert the Power Supply plug into a nearby

electrical outlet.

3. Connect the other end of the long console

cable to the bottom of the Power Supply.

VoiceStation™ 500 will run a brief self-

test, and then you will hear a tone. If you

don’t hear the tone, verify that the outlet is

working and the power is switched on.

4. Connect the short telephone cable to the

Power Supply. Your System Administrator

can help you to identify a standard analog

phone line.

VoiceStation™ 500 - 5

5. Connect the other end of the short tele-

phone cable to a jack wired for a standard

analog phone line.

► Do not plug the VoiceStation™ 500 into a

digital telephone network. Doing so may

damage the phone.

6. Place VoiceStation™ 500 in the center of

the room on a at, stable surface and press

the Volume Up and Volume Down buttons

to adjust the Ringer.

► The Ringer has three modes: High, Low,

and Off. The Ringer sounds when you

press the Volume buttons to indicate current

status.

7. Press the On/Off button to obtain a dial

tone.

► If you do not hear a dial tone, you may not

be connected to an analog telephone line.

For assistance, contact your System Admin-

istrator.

►When the On/Off indicator light is on, the Volume

buttons control the sound level of the speaker.

►When the On/Off indicator light is off, the

Volume buttons control the ringer volume.

Using VoiceStation™ 500

The Polycom

VoiceStation™ 500

supports three modes of operation:

• POTS Audio

• Bluetooth Audio (headset and hands-

free prole)

• Wired Audio Mode (2.5mm)

The Link Indicator is off when the phone

is in normal POTS mode. The Link

Indicator will be slowly ashing blue when

the VoiceStation™ 500 is in Bluetooth

mode, and it will be solid amber when

the phone is in Wired Audio mode (with a

cable connected).

When in POTS mode, inserting a 2.5mm

cable enables Wired Audio Mode. To

enter Wired Audio Mode, press the Mode

button. The amber link indicator will

come on. It is possible to make/answer

Bluetooth and POTS calls when in Wired

Audio Mode. For more information, refer

to ‘Changing between calls in Wired Audio

Mode’ on Page 15.

VoiceStation™ 500 - 6

Keypad

Dialing a Number

Example:

POTS Mode

Answer a Call

Press the button when VoiceStation™ 500 rings.

Adjust Speaker Volume

When a call is in progress, press the Volume Up or

Volume Down button to adjust the sound level.

Microphone Mute

Press the Mute button to turn off the microphones

and prevent the other party from hearing your

conversation. The red indicator lights near the

microphones will be on. The speaker is still active

and you can hear the other party. Press the Mute

button again to resume two-way communication. The

red indicator lights will go out.

VoiceStation™ 500 - 7

Pair with Bluetooth Device

Press the Mode button for 3 seconds to initiate pairing

mode. For more information, refer to Using Bluetooth

Audio.

Special Features

Your telephone system may provide special features

such as Call Waiting, Conference, or Transfer which

can be accessed by pressing this key. Ask your

System Administrator for more information on special

features available with your phone system.

End a Call

Press the On/Off button to end the call.

Redial

Press the Redial button.

Record a Conversation

Plug the end of a cable with RCA-type connectors

into the Aux Out jack on the Power Supply. Plug the

other end of the cable into the Aux In jack of your

tape recorder.

Audio cable

(RCA cable)

VoiceStation™ 500 - 8

Fax Machine

Telephone

snoitpo trop ataDeludoM llaW

Fax Machine

Telephone

snoitpo trop ataDeludoM llaW

Private Conversations

Plug a telephone into the data port on the

VoiceStation™ 500 wall module. Press the Hold

button to place the call on hold, then pick up the

receiver of the telephone connected to the data port.

You may also connect a fax machine or computer

modem to the data port.

Using Bluetooth Audio

Bluetooth Mode is an additional new mode

of operation offered by the VoiceStation™

500. This feature enables you to com-

bine the convenience of a mobile phone

or computer calling application with the

acoustics of a conference phone. For ex-

ample, if you were in a call on your mobile

telephone, you could connect your mobile

phone via Bluetooth to the VoiceStation™

500 and use its speaker and microphones

to continue your conversation and include

everyone in the room in the conversation.

Bluetooth Mode on the VoiceStation™ 500

provides increased exibility to conference

anywhere, even in environments where

there are no analog lines or telephony

infrastructure.

Bluetooth mode can be established in one

of three ways:

• Manually establish a Bluetooth

connection with VoiceStation™ 500

from a previously unpaired mobile

phone (see instructions below), or;

• Manually establish a Bluetooth

connection with VoiceStation™ 500

from a previously paired mobile

phone (select “PLCM VS500” from

a list of paired devices on your

mobile phone), or;

• Press the Mode button to go to

Bluetooth Mode. At this point,

pressing the On/Off button on

VoiceStation™ 500 will initiate

a Bluetooth link to the last paired

mobile phone that it was connected

to. Once connected it will establish

the Bluetooth mode without further

user action. During this time,

the Link Indicator will be solid

blue. If a Bluetooth link cannot

Computer

VoiceStation™ 500 - 9

be established within 60 seconds,

VoiceStation™ 500 will revert to

POTS mode.

Initiating Bluetooth Mode:

Conguring the VoiceStation™ 500 for

Bluetooth Mode

1. Press the Mode button to enter Blue-

tooth mode. The blue Mode LED

should be on (either slow blinking or

steady).

2. Press the Mode button again. Hold

for at least 3 seconds and ensure the

blue LED is fast blinking (discover-

ing).

You will hear a series of tones on

VoiceStation™ 500 indicating

that your Bluetooth device has

discovered and paired with the

VoiceStation™ 500.

On your Bluetooth device, select

VS500 as the discovered device and

when prompted for the Password,

enter ‘0000’. Once the Bluetooth-

enabled device is paired and linked

with VoiceStation™ 500, the blue

LED should be steady (On). A con-

rmation tone will also be heard on

the VoiceStation™ 500.

3. Refer to the following sections for

use with either a mobile phone or

computer.

Using VoiceStation™ 500 with

Bluetooth-Enabled Mobile

Phone:

Making and ending a Bluetooth mobile

phone call

1. Press the Mode button to enter Blue-

tooth mode. The blue Mode LED

should be on (steady).

2. Dial the phone number on the Blue-

tooth-enabled mobile phone or press

the On/Off button on VoiceStation™

500 to dial the last dialed number on

the mobile phone.

3. When nished, terminate the call

as you normally would with your

mobile phone, computer or press the

On/Off button on VoiceStation™

500.

Answering a mobile phone call on

VoiceStation™ 500

1. Ensure the mobile phone is paired

and linked with the VoiceStation™

500. See “Initiating Bluetooth

Mode” for more information.

2. When the mobile phone rings, an-

swer the call on your mobile phone

as you normally would or

3. Press the On/Off button on the

VoiceStation™ 500.

Ending the mobile phone call using

VoiceStation™ 500

1. Disconnect the call on your mobile

phone as you normally would, or ;

2. Press the On/Off button on the

VoiceStation™ 500.

Redialing the last dialed number using

VoiceStation™ 500

• Press the On/Off button on

VoiceStation™ 500 to dial the last

dialed number on the mobile phone.

NOTE: If you are in Bluetooth mode

and want to make a POTS call, you

must rst push the Mode button to

exit Bluetooth mode, then press the

On/Off button to initiate the POTS

call.

VoiceStation™ 500 - 10

Transferring audio between VoiceStation™

500 and mobile phone (for privacy)

1. Dial a telephone call according

to the directions in “Making and

ending a Bluetooth mobile phone

call”.

2. To transfer the audio from the

VoiceStation™ 500 to the mobile

phone, press the * button.

3. To transfer the audio from

the mobile phone back to the

VoiceStation™ 500, press the *

button again.

Changing between mobile phone calls us-

ing VoiceStation™ 500

• Use the Flash function on your

mobile phone to change between the

two phone calls.

Muting a call on VoiceStation™ 500

• Press the Mute button on the

VoiceStation™ 500 to mute/unmute

a call as described in the “POTS

Mode” section of this User Guide.

Changing Volume

• Press the Volume Up/Down buttons

on the VoiceStation™ 500 to adjust

the volume to the desired level as

described in the “POTS Mode” sec-

tion of this User Guide.

Recording a Bluetooth audio call

• Please refer to the ‘Record a Con-

versation’ as described in the “POTS

Mode” section of this User Guide.

Making a POTS call while in Bluetooth

mode

1. If you are in a call using your Blue-

tooth device, place the call on hold

by pressing the Mode button on the

VoiceStation™ 500 and ensure that

no LED is lit. If you do not press

the Mode button to exit Bluetooth

mode, the last number dialed will

automatically be dialed again when

you press the On/Off button.

2. Press the On/Off button on the

VoiceStation™ 500 to get the POTS

dial tone.

3. Dial the call using the keypad of the

VoiceStation™ 500.

4. To end the call, press the On/Off

button on the VoiceStation™ 500.

5. To resume the Bluetooth call,

press the Mode button on the

VoiceStation™ 500.

Changing between calls in different modes

(POTS to/from Bluetooth)

1. To make a POTS call while in

Bluetooth mode, press the Mode

button, press the On/Off button,

then dial the phone number. When

complete, press the On/Off button.

Press the Mode button to return to

the call in Bluetooth mode.

2. To answer a POTS call while in

Bluetooth mode, press the On/Off

button.

Disconnecting Bluetooth link using

VoiceStation™ 500

• Press and hold the Mode button for

3 seconds while in Bluetooth mode.

You should see the steady blue

LED turns to slow blinking with an

audible beep.

Using VoiceStation™ 500

with Bluetooth-Enabled

Computer(s):

Conguring the VoiceStation™ 500 for

Bluetooth Mode

1. Press the Mode button to enter

Bluetooth mode. The blue Mode

LED should be on (either slow

blinking or steady).

VoiceStation™ 500 - 11

2. Ensure you have turned on the

Bluetooth mode. Press and hold the

Mode button for at least 3 seconds

and ensure the blue LED is fast

blinking (discovering). You will hear

a series of tones on VoiceStation™

500 indicating that your Bluetooth

device has discovered the

VoiceStation™ 500.

On your Bluetooth device, select

PLCM VS500 as the discovered

device and when prompted for the

Password, enter ‘0000’. (Follow the

prompts on your computer) Once

the Bluetooth-enabled device is

paired with VoiceStation™ 500, the

blue LED should be steady (On). A

conrmation tone will also be heard

on the VoiceStation™ 500.

Making and ending computer calls

1. Press the On/Off button on

VoiceStation™ 500 to link to the

computer.

2. Dial the phone number.

3. When nished, terminate the call

as you normally would with your

computer.

Answering a computer call

1. Ensure the mobile phone is paired

with the VoiceStation™ 500.

2. When the computer call rings,

answer it as you normally would on

the computer.

Ending the mobile phone call using

VoiceStation™ 500

• Disconnect the call on your mobile

phone as you normally would.

Redialing the last dialed number using

VoiceStation™ 500 for computer calls

• Not available.

Transferring audio between VoiceStation™

500 and computer

1. In order to transfer audio from

VoiceStation™ 500 and the

computer (or vice-versa), you must

de-link the two devices. You can do

so in two ways:

• Press and hold the Mode key

for at least 3 seconds on the

VoiceStation™ 500.

• From your computer calling applica-

tion, right-click your mouse and

follow the instructions to de-link the

Bluetooth connection.

Changing between computer calls using

VoiceStation™ 500

• Not available.

Muting a call on VoiceStation™ 500

• Press the Mute button on the

VoiceStation™ 500 to mute/unmute

a call as described in the “POTS

Mode” section of this User Guide.

Changing Volume

• Press the Volume Up and Volume

Down buttons on the VoiceStation™

500 to adjust the volume to the

desired level as described in the

“POTS Mode” section of this User

Guide.

Recording a call

• Please refer to the ‘Record a Con-

versation’ as described in the “POTS

Mode” section of this User Guide.

Making a POTS call while in Bluetooth

mode on computer

1. If you are in a call using your Blue-

tooth device, place the call on hold

by pressing the Hold button on the

VoiceStation™ 500.

2. Press the On/Off button on the

VoiceStation™ 500 to place a POTS

call.

VoiceStation™ 500 - 12

3. Dial the call using the keypad of the

VoiceStation™ 500.

4. To end the call, press the On/Off

button on the VoiceStation™ 500.

5. Press the Hold button on the

VoiceStation™ 500 to resume the

call with the Bluetooth device.

Changing between calls in different modes

(POTS to/from Bluetooth)

1. To make a POTS call while in Blue-

tooth mode, press the Mode button,

press the On/Off button, then dial

the phone number. When complete,

press the On/Off button. Press the

Mode button to return to the call in

Bluetooth mode.

2. To answer a POTS call while in

Bluetooth mode, press the On/Off

button.

Disconnecting Bluetooth link using

VoiceStation™ 500

• Press and hold the Mode button for

three seconds. You should see the

blue LED turn to slow blinking and

hear an audio beep.

VoiceStation™ 500 - 13

Wired Audio Mode via 2.5mm Jack

Use the provided mobile phone connector

cable to connect your mobile phone to the

VoiceStation™ 500’s 2.5mm audio input/

output jack. The mobile phone connec-

tor cable will plug into a standard 2.5mm

headset jack on your mobile phone. A

headset adaptor may be necessary to adapt

your mobile phone to this connector.

Adaptors are widely available at electron-

ics stores and mobile phone outlets for

universal hands-free kits. Polycom

also

offers hands-free adaptor kits for Nokia,

Samsung, Sony Ericsson and Siemens

brand mobile phones. Please contact your

local sales representative for more infor-

mation about these adapter kits.

You can also use the provided Computer

Calling Cable with the VoiceStation™

500’s 2.5mm audio jack. The Computer

Calling Cable allows you to make calls

over the Internet using the VoiceStation™

500. This feature enables you to combine

the convenience of Internet phone calls

via applications such as Skype, AIM,

MSN Messenger, Yahoo! Messenger, and

corporate IP softphones, with the audio

quality of Polycom’s legendary conference

phones. Simply plug the Computer Call-

ing Cable into your VoiceStation™ 500

on one end, and then connect the cable to

the sound card connectors on your desktop

computer or laptop.

When in POTS mode, inserting a 2.5mm

cable enables Wired Audio Mode. To

enter Wired Audio Mode, press the Mode

button. The amber link indicator will

come on. It is possible to make/answer

Bluetooth and POTS calls when in Wired

Audio Mode. For more information, refer

to ‘Changing between calls in Wired Audio

Mode’ on Page 15.

When you are in active Wired Audio Mode

it is possible to receive an incoming POTS

call. To pick up an incoming POTS call

you simply press the On/Off button and the

link indicator will turn off. This indicates

that you are now in POTS mode. As soon

as you are done with your POTS call, you

can press the Mode button again so that the

amber link indicator appears, and you are

now back in Wired Audio mode.

Conguring the Wired Audio

Mode:

1. Insert one end of mobile phone

cable with 2.5 mm connector

into the 2.5mm phone jack on the

VoiceStation™ 500 and the other

into your mobile phone or computer.

2. Press the Mode button to enter

Wired Audio Mode. The Amber

LED should be on.

Using Wired Audio Mode to

make phone calls:

Making and ending a phone call in Wired

Audio Mode

1. Make sure the VoiceStation™ 500 is

set up as described in the “Congur-

ing the Wired Audio Mode” section

above.

2. Dial the phone number from the de-

vice connected to the VoiceStation™

500.

3. When nished, terminate the call

as you normally would with your

mobile phone or computer.

Answering a call in Wired Audio Mode

1. Make sure the VoiceStation™ 500 is

set up as described in the “Congur-

ing the Wired Audio Mode” section

above.

VoiceStation™ 500 - 14

2. When the incoming call ring is

heard, answer it as you normally

would.

Redialing the last dialed number in Wired

Audio Mode

• Redial the last number using

the mobile phone or computer

connected to the VoiceStation™

500.

Transferring audio between devices in

Wired Audio Mode

• The connector cable (mobile phone

or computer) with 2.5 mm connec-

tor needs to be removed from the

mobile phone or computer.

Changing between calls in Wired Audio

Mode

The Mode button can be used to swap be-

tween the POTS, Bluetooth and the Wired

Audio calls:

1. Making/Answering a POTS call

when in Wired Audio Mode: Press

the Mode button, press the On/Off

button, make/answer the phone call.

The Amber LED should not be lit.

When nished, press the On/Off

button, then press the Mode button

again.

2. Making/answering a Bluetooth call

when in Wired Audio Mode: Press

the Mode button, then make/answer

the phone call. The Bluetooth LED

should be on (blue). When nished,

press the Mode button again. The

LED should return to amber.

Muting a call on VoiceStation™ 500

1. Press the Mute button on the

VoiceStation™ 500 to mute/unmute

a call as described in the “POTS

Mode” section of this User Guide or;

2. The mobile phone Mute/Unmute

button can be used.

Changing Volume

1. Press the Volume Up/Down buttons

on the VoiceStation™ 500 to adjust

the volume to the desired level as

described in the “POTS Mode” sec-

tion of this User Guide or;

2. Use the mobile phone to adjust the

volume.

Recording an audio call

• Please refer to the ‘Record a Con-

versation’ section of this User’s

Guide as described in the “POTS

Mode” section of this User Guide.

Disconnecting Wired Audio Mode on

VoiceStation™ 500

1. End the phone call as you normally

would.

2. Unplug the cable from the

2.5mm port on the side of the

VoiceStation™ 500. The amber

LED should turn off, bringing the

VoiceStation™ 500 to POTS mode.

VoiceStation™ 500 - 15

Adjusting Microphone Settings

on Computer (Optional):

Start → Settings → Control Panel →

Sounds and Audio Devices → Audio →

Sound Recording → Volume → Micro-

phone (Advanced) → Mic Boost “ON”

For best audio performance when using the

Computer Calling Cable with VoiceStation™

500, be sure to turn on “Mic Boost” in the

Windows® XP Sounds and Audio Devices

menu as shown below. (Settings may vary

depending on Operating System.)

VoiceStation™ 500 - 16

Maintenance

Troubleshooting

Clean the VoiceStation™ 500 with a soft, dry cloth.

Do not use alcohol- or petroleum-based cleaners.

Mufed or “In a Well”

Reception

► Speak closer to the phone so that

the microphones pick up your

speech more accurately.

► Add more sound absorbency to the

room.

Excessive Noise

► Noisy equipment such as a com-

puter or fan may make it difcult to

hear the other party. Both parties

should turn off noisy equipment.

► Try calling again to see if a differ-

ent line provides a better connec-

tion.

Physical Damage

► If physical damage is severe

enough that the internal parts

become visible, disconnect the

VoiceStation™ 500 immediately.

► Do not reconnect to the network

until the VoiceStation™ 500 has

been repaired.

No Dial Tone

► Check that all connections are cor-

rect and tight.

► Make sure the short cable is con-

nected to a standard analog phone

line.

► Try a different telephone line.

Phone Does Not Ring

► Adjust the Ringer with the Volume

up button.

Short Silences, Echoes, or

Clipped Speech

► Do not move VoiceStation™ 500

while it is in use.

► Keep your hands away from the

phone during calls.

► Keep papers, cups, coffee pots, and

other objects away from the phone.

► At the beginning of a call, allow

each speaker present to speak in

turn for a few moments to enable

the phone’s electronics to adjust to

the acoustic environment.

► The other party may be using low

quality equipment or a half-duplex

conference bridge, in which case

there is no solution.

VoiceStation™ 500 - 17

Polycom Limited Warranty

Polycom warrants to the end user that

the system will be in good working order

on the date Polycom or its authorized

reseller delivers or installs the system,

whichever is later (Warranty Date). If you

notify Polycom or its Authorized Dealer

within one year of the Warranty Date that

the system is not in good working order,

Polycom will, without charge , repair or

replace, at its option, the system compo-

nents that are not in good working order.

Repair or replacement parts may be new

or refurbished and will be provided on an

exchange basis. If Polycom determines

that your system cannot be repaired or

replaced, Polycom will remove the system

and, at your option, refund the purchase

price of your system or apply the purchase

price towards the purchase of another

Polycom system. A summary of Polycom

maintenance coverage may be obtained

from Polycom by calling 1.800.451.0995

(in the continental U.S. only). If you

purchased your system from a Polycom

Authorized Dealer, contact your reseller

for the details of the maintenance plan

applicable to your system. This Polycom

limited warranty covers damage to the

system caused by power surges. Polycom

will not be responsible under this limited

warranty for damages resulting from:

► Failure to follow Polycom’s installa-

tion, operation, or maintenance instruc-

tions.

► Unauthorized system modication,

movement, or alteration..

► Unauthorized use of common carrier

communication services accessed

through the system.

► Abuse, misuse, negligent acts or

omissions of the customer and persons

under the customer’s control; or

► Acts of third parties and acts of God.

Polycom’s obligation to repair, replace,

or refund, as set forth above, is your

exclusive remedy. Except as specically

set forth above, Polycom, its afliates,

suppliers, and dealers make no warran-

ties, express or implied, and specically

disclaim any warranties of merchantability

or tness for a particular purpose.

Limitations of Liability

The liability of Polycom and its afliates

and suppliers for any claims, losses, dam-

ages, or expenses from any cause whatso-

ever (including acts or omissions of third

parties), regardless of the form of action,

whether in contract, tort, or otherwise,

shall not exceed the lesser of: (1) the direct

damages proven; or (2) the repair cost,

replacement cost, license fee, annual rental

charge, or purchase price, as the case may

be, of the equipment that gives rise to the

claim. In no event shall Polycom and its

afliates and suppliers be liable for any

incidental, special, reliance, consequential,

or indirect loss or damage arising out of or

in anyway in connection with the use of

the equipment. As used in this paragraph,

consequential damages include, but are

not limited to, the following: lost prots,

lost revenues, and losses arising out of

unauthorized use (or charges for such use)

of common carrier telecommunications

services or facilities accessed through or

connected to the equipment. For personal

injury caused by Polycom’s negligence,

Polycom’s liability shall be limited to

proven damages. No action or proceed-

ing against Polycom or its afliates or

VoiceStation™ 500 - 18

suppliers may be commenced more than

twenty-four (24) months after the cause of

action accrues.

THIS PARAGRAPH SETS FORTH THE

EXCLUSIVE REMEDY FOR ANY

CLAIMS, LOSSES, DAMAGES OR

EXPENSES ASSOCIATED WITH THE

EQUIPMENT AND REGARDLESS OF A

FAILURE OF ESSENTIAL PURPOSE.

Pan-American Copyright Conventions. No

part of the contents of this manual may be

copied, reproduced, or transmitted in any

form or by any means, or translated into

another language or format, in whole or

part, without written consent of Polycom,

Inc. The software contained within this

product is protected by United States copy-

right laws and international treaty provi-

sions. Polycom, Inc., retains title and own-

ership of all property rights with respect to

the software within this product. You shall

not (and shall not allow any third party

to) decompile, disassemble, or otherwise

reverse engineer or attempt to reconstruct

or discover any source code or underlying

ideas or algorithms of the software by any

means whatsoever. Do not remove (or al-

low any third party to remove) any product

identication, copyright or other notices.

Polycom® and the logo design are regis-

tered trademarks and VoiceStation™ 500

and Acoustic Clarity Technology™ are

trademark of Polycom, Inc. in the United

States, and various countries.

This device complies with part 15 of the

FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful

interference, and

(2) This device must accept any interfer-

ence received, including interference

that may cause undesired operation.

NOTE: This equipment has been tested

and found to comply with the limits for

a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits

are designed to provide reasonable

protection against harmful interference in

a residential installation. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed and

used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is

no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can

be determined by turning the equipment

off and on, the user is encouraged to try to

correct the interference by one or more of

the following measures:

 Reorient or relocate the receiving

antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet

on a circuit different from that to

which the receiver is connected.

 Consult the dealer or an experienced

radio/TV technician for help.

In accordance with part 15 of the FCC

rules, the user is cautioned that any

changes or modifications not expressly

approved by Polycom Inc. could void the

user’s authority to operate the equipment.

FCC Rules

VoiceStation™ 500 - 19

This Class [B] digital apparatus complies

with Canadian ICES-003.

Cet appareil numérique de la classe [B]

est conforme à la norme N M B-003 du

Canada.

Canadian Department of Communications Notice

A FCC compliant telephone cord and

modular plug is provided with this

equipment. This equipment is designed

to be connected to the telephone network

or premises wiring using a compatible

modular jack that is Part 68 complaint.

See the rest of these installation

instructions for details.

The REN is used to determine the quantity

of devices that may be connected to the

telephone line. Excessive RENs on the

telephone line may result in the devices

not ringing in response to an incoming

call. Typically the sum of RENs should

not exceed five (5.0). To be certain of the

number of devices that may be connected

to a line (as determined by the total RENs)

contact the local telephone company.

WHEN PROGRAMMING EMERGENCY

NUMBERS AND/OR MAKING TEST

CALLS TO EMERGENCY NUMBERS:

1. Remain on the line and briefly ex-

plain to the dispatcher the reason for

the call.

2. Perform such activities in the off-

peak hours, such as early morning or

late evening.

Ring Equivalency Number (REN)

Automatic Dialing

Telephone Company Connector

Canadian Telephone Company Requirements

NOTICE: The Industry Canada label

identifies certified equipment. This

certification means that the equipment

meets telecommunications protective,

operational and safety requirements as

prescribed in the appropriate Terminal

Equipment Technical Requirements

document(s). The Department does not

guarantee the equipment will operate to the

user’s satisfaction.

Before installing this equipment, users

should ensure that it is permissible to be

connected to the facilities of the local

telecommunications company. The

equipment must also be installed using

an acceptable method of connection. The

customer should be aware that compliance

with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be

coordinated by a representative designated

by the supplier. Any repairs or alterations

made by the user to this equipment, or

equipment malfunctions, may give the

telecommunications company cause

to request the user to disconnect the

equipment.

Users should ensure for their own

protection that the electrical ground

connections of the power utility, telephone

lines and internal metallic water pipe

system, if present, are connected together.

VoiceStation™ 500 - 20

This precaution may be particularly

important in rural areas.

Caution: Users should not attempt to make

such connections themselves, but should

contact the appropriate electric inspection

authority, or electrician, as appropriate.’’

“NOTICE: The Ringer Equivalence

Number (REN) assigned to each relevant

terminal device provides an indication

of the maximum number of terminals

allowed to be connected to a telephone

interface. The termination on an interface

may consist of any combination of devices

subject only to the requirement that the

sum of the Ringer Equivalence Numbers

of all the devices does not exceed 5.’’

The term “IC:” before the certification/

registration number dignifies only that the

Industry Canada technical specifications

were met.

Exhibit J - Customer Information

This equipment complies with Part 68

of the FCC rules and the requirements

adopted by the ACTA. On the exterior

of the cabinet of this equipment is a label

that contains, among other information,

a product identier in the format US:

2HWTE09BVOICEST. If requested, this

number must be provided to the telephone

company.

• FCC Registration Number: US: 2HWTE09BVOICEST

• Ringer Equivalence Number (REN): 0.9B

• Facility Interface Code (FIC): 02LS2

• Service Order Code (SOC): 6.0Y

• USOC Jack Type: RJ11C

If this equipment VoiceStation™ 500

causes harm to the telephone network,

the telephone company will notify you in

advance that temporary discontinuance of

service may be required. But if advance

notice isn’t practical, the telephone

company will notify the customer as soon

as possible. Also, you will be advised of

your right to file a complaint with the FCC

if you believe it is necessary.

The telephone company may make

changes to its facilities, equipment,

operations or procedures that could affect

the operation of the equipment. If this

happens, the telephone company will

provide advance notice so you can make

the necessary modifications to maintain

uninterrupted service.

If trouble is experienced with this

equipment VoiceStation™ 500, for

repair or warranty information, please

contact Polycom Inc.: 1-888-248-4143;

1-408-474-2067 Option 1; 4750 Willow

Road, Pleasanton, CA 94588-2708,

USA; or http://www.polycom.com. If

the equipment is causing harm to the

telephone network, the telephone company

may request that you disconnect the

equipment until the problem is resolved.

Connection to party line service is

subject to state tariffs. (Contact the state

public utility commission, public service

commission or corporate commission for

information.)

Portions of the software contained in this

SPIRIT.

Leht laadib ...

Poly SoundPoint IP 500 Kasutusjuhend

Bränd: Poly

Mudel: SoundPoint IP 500

Tüüp: Kasutusjuhend

Laadige alla PDF

aruanne

teistes keeltes

italiano: Poly SoundPoint IP 500 Manuale utente
English: Poly SoundPoint IP 500 User manual

Poly SoundPoint IP 500 Kasutusjuhend

Poly SoundPoint IP 500 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid