Alcatel-Lucent 5620 Kasutusjuhend

Alcatel-Lucent 5620

SERVICE AWARE MANAGER | RELEASE 11.0 R5

MPR USER GUIDE

3HE 08459 AAAA TQZZA Edition 01

Alcatel-Lucent Proprietary

This document contains proprietary information of Alcatel-Lucent and is not to be disclosed

or used except in accordance with applicable agreements.

MPR USER GUIDE

When printed by Alcatel-Lucent, this document is printed on recycled paper.

Alcatel-Lucent assumes no responsibility for the accuracy of the information presented, which is

subject to change without notice.

Alcatel, Lucent, Alcatel-Lucent, the Alcatel-Lucent logo, lightRadio, and TiMetra are registered

trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners.

Disclaimers

Alcatel-Lucent products are intended for commercial uses. Without the appropriate network design

engineering, they must not be sold, licensed or otherwise distributed for use in any hazardous

environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft

navigation or communication systems, air traffic control, direct life-support machines, or weapons

systems, in which the failure of products could lead directly to death, personal injury, or severe physical

or environmental damage. The customer hereby agrees that the use, sale, license or other distribution

of the products for any such application without the prior written consent of Alcatel-Lucent, shall be at

the customer's sole risk. The customer hereby agrees to defend and hold Alcatel-Lucent harmless from

any claims for loss, cost, damage, expense or liability that may arise out of or in connection with the

use, sale, license or other distribution of the products in such applications.

This document may contain information regarding the use and installation of non-Alcatel-Lucent

products. Please note that this information is provided as a courtesy to assist you. While Alcatel-Lucent

tries to ensure that this information accurately reflects information provided by the supplier, please refer

to the materials provided with any non-Alcatel-Lucent product and contact the supplier for

confirmation. Alcatel-Lucent assumes no responsibility or liability for incorrect or incomplete

information provided about non-Alcatel-Lucent products.

However, this does not constitute a representation or warranty. The warranties provided for

Alcatel-Lucent products, if any, are set forth in contractual documentation entered into by

Alcatel-Lucent and its customers.

This document was originally written in English. If there is any conflict or inconsistency between the

English version and any other version of a document, the English version shall prevail.

iii

Alcatel-Lucent License Agreement

SAMPLE END USER LICENSE AGREEMENT

1. LICENSE

1.1 Subject to the terms and conditions of this Agreement, Alcatel-Lucent grants

to Customer and Customer accepts a nonexclusive, nontransferable license to

use any software and related documentation provided by Alcatel-Lucent

pursuant to this Agreement ("Licensed Program") for Customer's own internal

use, solely in conjunction with hardware supplied or approved by

Alcatel-Lucent. In case of equipment failure, Customer may use the Licensed

Program on a backup system, but only for such limited time as is required to

rectify the failure.

1.2 Customer acknowledges that Alcatel-Lucent may have encoded within the

Licensed Program optional functionality and capacity (including, but not

limited to, the number of equivalent nodes, delegate workstations, paths and

partitions), which may be increased upon the purchase of the applicable license

extensions.

1.3 Use of the Licensed Program may be subject to the issuance of an application

key, which shall be conveyed to the Customer in the form of a Supplement to

this End User License Agreement. The purchase of a license extension may

require the issuance of a new application key.

2. PROTECTION AND SECURITY OF LICENSED PROGRAMS

2.1 Customer acknowledges and agrees that the Licensed Program contains

proprietary and confidential information of Alcatel-Lucent and its third party

suppliers, and agrees to keep such information confidential. Customer shall not

disclose the Licensed Program except to its employees having a need to know,

and only after they have been advised of its confidential and proprietary nature

and have agreed to protect same.

2.2 All rights, title and interest in and to the Licensed Program, other than those

expressly granted to Customer herein, shall remain vested in Alcatel-Lucent or

its third party suppliers. Customer shall not, and shall prevent others from

copying, translating, modifying, creating derivative works, reverse

engineering, decompiling, encumbering or otherwise using the Licensed

Program except as specifically authorized under this Agreement.

Notwithstanding the foregoing, Customer is authorized to make one copy for

its archival purposes only. All appropriate copyright and other proprietary

notices and legends shall be placed on all Licensed Programs supplied by

Alcatel-Lucent, and Customer shall maintain and reproduce such notices on

any full or partial copies made by it.

3. TERM

3.1 This Agreement shall become effective for each Licensed Program upon

delivery of the Licensed Program to Customer.

iv

3.2 Alcatel-Lucent may terminate this Agreement: (a) upon notice to Customer if

any amount payable to Alcatel-Lucent is not paid within thirty (30) days of the

date on which payment is due; (b) if Customer becomes bankrupt, makes an

assignment for the benefit of its creditors, or if its assets vest or become subject

to the rights of any trustee, receiver or other administrator; (c) if bankruptcy,

reorganization or insolvency proceedings are instituted against Customer and

not dismissed within 15 days; or (d) if Customer breaches a material provision

of this Agreement and such breach is not rectified within 15 days of receipt of

notice of the breach from Alcatel-Lucent.

3.3 Upon termination of this Agreement, Customer shall return or destroy all

copies of the Licensed Program. All obligations of Customer arising prior to

termination, and those obligations relating to confidentiality and nonuse, shall

survive termination.

4. CHARGES

4.1 Upon shipment of the Licensed Program, Alcatel-Lucent will invoice

Customer for all fees, and any taxes, duties and other charges. Customer will

be invoiced for any license extensions upon delivery of the new software

application key or, if a new application key is not required, upon delivery of

the extension. All amounts shall be due and payable within thirty (30) days of

receipt of invoice, and interest will be charged on any overdue amounts at the

rate of 1 1/2% per month (19.6% per annum).

5. SUPPORT AND UPGRADES

5.1 Customer shall receive software support and upgrades for the Licensed

Program only to the extent provided for in the applicable Alcatel-Lucent

software support policy in effect from time to time, and upon payment of any

applicable fees. Unless expressly excluded, this Agreement shall be deemed to

apply to all updates, upgrades, revisions, enhancements and other software

which may be supplied by Alcatel-Lucent to Customer from time to time.

6. WARRANTIES AND INDEMNIFICATION

6.1 Alcatel-Lucent warrants that the Licensed Program as originally delivered to

Customer will function substantially in accordance with the functional

description set out in the associated user documentation for a period of 90 days

from the date of shipment, when used in accordance with the user

documentation. Alcatel-Lucent's sole liability and Customer's sole remedy for

a breach of this warranty shall be Alcatel-Lucent's good faith efforts to rectify

the nonconformity or, if after repeated efforts Alcatel-Lucent is unable to

rectify the nonconformity, Alcatel-Lucent shall accept return of the Licensed

Program and shall refund to Customer all amounts paid in respect thereof. This

warranty is available only once in respect of each Licensed Program, and is not

renewed by the payment of an extension charge or upgrade fee.

v

6.2 ALCATEL-LUCENT EXPRESSLY DISCLAIMS ALL OTHER

WARRANTIES, REPRESENTATIONS, COVENANTS OR CONDITIONS

OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF

WORKMANSHIP, MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, DURABILITY, OR THAT THE OPERATION

OF THE LICENSED PROGRAM WILL BE ERROR FREE OR THAT THE

LICENSED PROGRAMS WILL NOT INFRINGE UPON ANY THIRD

PARTY RIGHTS.

6.3 Alcatel-Lucent shall defend and indemnify Customer in any action to the

extent that it is based on a claim that the Licensed Program furnished by

Alcatel-Lucent infringes any patent, copyright, trade secret or other intellectual

property right, provided that Customer notifies Alcatel-Lucent within ten (10)

days of the existence of the claim, gives Alcatel-Lucent sole control of the

litigation or settlement of the claim, and provides all such assistance as

Alcatel-Lucent may reasonably require. Notwithstanding the foregoing,

Alcatel-Lucent shall have no liability if the claim results from any modification

or unauthorized use of the Licensed Program by Customer, and Customer shall

defend and indemnify Alcatel-Lucent against any such claim.

6.4 Alcatel-Lucent Products are intended for standard commercial uses. Without

the appropriate network design engineering, they must not be sold, licensed or

otherwise distributed for use in any hazardous environments requiring fail safe

performance, such as in the operation of nuclear facilities, aircraft navigation

or communication systems, air traffic control, direct life-support machines, or

weapons systems, in which the failure of products could lead directly to death,

personal injury, or severe physical or environmental damage. The Customer

hereby agrees that the use, sale, license or other distribution of the Products for

any such application without the prior written consent of Alcatel-Lucent, shall

be at the Customer's sole risk. The Customer also agrees to defend and hold

Alcatel-Lucent harmless from any claims for loss, cost, damage, expense or

liability that may arise out of or in connection with the use, sale, license or

other distribution of the Products in such applications.

7. LIMITATION OF LIABILITY

7.1 IN NO EVENT SHALL THE TOTAL COLLECTIVE LIABILITY OF

ALCATEL-LUCENT, ITS EMPLOYEES, DIRECTORS, OFFICERS OR

AGENTS FOR ANY CLAIM, REGARDLESS OF VALUE OR NATURE,

EXCEED THE AMOUNT PAID UNDER THIS AGREEMENT FOR THE

LICENSED PROGRAM THAT IS THE SUBJECT MATTER OF THE

CLAIM. IN NO EVENT SHALL THE TOTAL COLLECTIVE LIABILITY

OF ALCATEL-LUCENT, ITS EMPLOYEES, DIRECTORS, OFFICERS OR

AGENTS FOR ALL CLAIMS EXCEED THE TOTAL AMOUNT PAID BY

CUSTOMER TO ALCATEL-LUCENT HEREUNDER. NO PARTY SHALL

BE LIABLE FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL

DAMAGES, WHETHER OR NOT SUCH DAMAGES ARE

FORESEEABLE, AND/OR THE PARTY HAD BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

7.2 The foregoing provision limiting the liability of Alcatel-Lucent's employees,

agents, officers and directors shall be deemed to be a trust provision, and shall

be enforceable by such employees, agents, officers and directors as trust

beneficiaries.

vi

8. GENERAL

8.1 Under no circumstances shall either party be liable to the other for any failure

to perform its obligations (other than the payment of any monies owing) where

such failure results from causes beyond that party's reasonable control.

8.2 This Agreement constitutes the entire agreement between Alcatel-Lucent and

Customer and supersedes all prior oral and written communications. All

amendments shall be in writing and signed by authorized representatives of

both parties.

8.3 If any provision of this Agreement is held to be invalid, illegal or

unenforceable, it shall be severed and the remaining provisions shall continue

in full force and effect.

8.4 The Licensed Program may contain freeware or shareware obtained by

Alcatel-Lucent from a third party source. No license fee has been paid by

Alcatel-Lucent for the inclusion of any such freeware or shareware, and no

license fee is charged to Customer for its use. The Customer agrees to be

bound by any license agreement for such freeware or shareware. CUSTOMER

ACKNOWLEDGES AND AGREES THAT THE THIRD PARTY SOURCE

PROVIDES NO WARRANTIES AND SHALL HAVE NO LIABILITY

WHATSOEVER IN RESPECT OF CUSTOMER'S POSSESSION AND/OR

USE OF THE FREEWARE OR SHAREWARE.

8.5 Alcatel-Lucent shall have the right, at its own expense and upon reasonable

written notice to Customer, to periodically inspect Customer's premises and

such documents as it may reasonably require, for the exclusive purpose of

verifying Customer's compliance with its obligations under this Agreement.

8.6 All notices shall be sent to the parties at the addresses listed above, or to any

such address as may be specified from time to time. Notices shall be deemed

to have been received five days after deposit with a post office when sent by

registered or certified mail, postage prepaid and receipt requested.

8.7 If the Licensed Program is being acquired by or on behalf of any unit or agency

of the United States Government, the following provision shall apply: If the

Licensed Program is supplied to the Department of Defense, it shall be

classified as "Commercial Computer Software" and the United States

Government is acquiring only "restricted rights" in the Licensed Program as

defined in DFARS 227-7202-1(a) and 227.7202-3(a), or equivalent. If the

Licensed Program is supplied to any other unit or agency of the United States

Government, rights will be defined in Clause 52.227-19 or 52.227-14 of the

FAR, or if acquired by NASA, Clause 18-52.227-86(d) of the NASA

Supplement to the FAR, or equivalent. If the software was acquired under a

contract subject to the October 1988 Rights in Technical Data and Computer

Software regulations, use, duplication and disclosure by the Government is

subject to the restrictions set forth in DFARS 252-227.7013(c)(1)(ii) 1988, or

equivalent.

8.8 Customer shall comply with all export regulations pertaining to the Licensed

Program in effect from time to time. Without limiting the generality of the

foregoing, Customer expressly warrants that it will not directly or indirectly

export, reexport, or transship the Licensed Program in violation of any export

laws, rules or regulations of Canada, the United States or the United Kingdom.

vii

8.9 No term or provision of this Agreement shall be deemed waived and no breach

excused unless such waiver or consent is in writing and signed by the party

claimed to have waived or consented. The waiver by either party of any right

hereunder, or of the failure to perform or of a breach by the other party, shall

not be deemed to be a waiver of any other right hereunder or of any other

breach or failure by such other party, whether of a similar nature or otherwise.

8.10 This Agreement shall be governed by and construed in accordance with the

laws of the Province of Ontario. The application of the United Nations

Convention on Contracts for the International Sale of Goods is hereby

expressly excluded.

viii

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 ix

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

Preface

The Preface provides general information about the 5620 Service Aware Manager

documentation suite, including this guide.

Prerequisites

Readers of the 5620 SAM documentation suite are assumed to be familiar with the

following:

• 5620 SAM software structure and components

• 5620 SAM GUI operations and tools

• typical 5620 SAM management tasks and procedures

• device and network management concepts

5620 SAM documentation suite

The 5620 SAM documentation suite describes the 5620 SAM and the associated

network management of its supported devices. Contact your Alcatel-Lucent support

representative for information about specific network or facility considerations.

Table 1 lists the documents in the 5620 SAM customer documentation suite.

Table 1 5620 SAM customer documentation suite

Guide Description

5620 SAM core documentation

5620 SAM Release

Description

The 5620 SAM Release Description provides information about the new features

associated with a 5620 SAM software release.

(1 of 5)

Preface

x September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

5620 SAM Release Notice The 5620 SAM Release Notice provides important information about the software

release, including outstanding issues and restrictions. This document is not shipped with

the on-product customer documentation and must be obtained from OLCS

as described

in Documentation and resources on the web.

5620 SAM Planning Guide The 5620 SAM Planning Guide provides information about 5620 SAM scalability and

recommended hardware configurations.

5620 SAM System

Architecture Guide

The 5620 SAM System Architecture Guide is intended for technology officers, network

planners, and system administrators to increase their knowledge of the 5620 SAM

software structure and components. It describes the system structure, software

components, and interfaces of the 5620 SAM. In addition, 5620 SAM fault tolerance,

security, and network management capabilities are discussed from an architectural

perspective.

5620 SAM | 5650 CPAM

Installation and Upgrade

Guide

The 5620 SAM | 5650 CPAM Installation and Upgrade Guide provides OS considerations,

configuration information, and procedures for the following:

• installing, upgrading, and uninstalling 5620 SAM and 5650 CPAM software in

standalone and redundant deployments

• 5620 SAM system migration to a different system

• conversion from a standalone to a redundant 5620 SAM system

5620 SAM User Guide The 5620 SAM User Guide provides information about using the 5620 SAM to manage the

service-aware IP/MPLS network, including GUI basics, service configuration, and policy

management.

The 5620 SAM User Guide uses a task-based format that employs both high-level

workflows and detailed procedures.

5620 SAM management information specific to LTE network elements is covered in the

5620 SAM LTE ePC User Guide and 5620 SAM LTE RAN User Guide.

5620 SAM management information specific to 1830 PSS network elements is covered in

the 5620 SAM Optical User Guide.

5620 SAM System

Administrator Guide

The 5620 SAM System Administrator Guide provides information about the tasks

performed by a user with a 5620 SAM admin role, including:

• 5620 SAM security management tasks such as setting up all required user accounts

and user groups

• advanced configuration tasks such as configuring, maintaining, and administering

the 5620 SAM operational environment

• routine maintenance tasks to maintain the 5620 SAM hardware and system integrity

and efficiencies

5620 SAM Integration

Guide

The 5620 SAM Integration Guide provides procedures to allow the 5620 SAM to integrate

with other Alcatel-Lucent products and third-party products.

5620 SAM Supervision

Module User Guide

The 5620 SAM Supervision Module User Guide provides information about how to

configure and use the web-based 5620 SAM Supervision Module for fault management

and at-a-glance network element monitoring.

5620 SAM Scripts and

Templates Developer

Guide

The 5620 SAM Scripts and Templates Developer Guide provides information that allows

users to develop, manage, and run CLI-based or XML-based scripts or templates.

The guide is intended for developers, skilled administrators, and operators who are

expected to be familiar with the following:

• CLI scripting, XML, and the Velocity engine

• basic scripting or programming

• 5620 SAM functions

Guide Description

(2 of 5)

Preface

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xi

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

5620 SAM Parameter

Guide

The 5620 SAM Parameter Guide provides:

• parameter descriptions that include value ranges and default values

• parameter options and option descriptions

• parameter and option dependencies

• parameter mappings to the 5620 SAM-O XML equivalent property names

Parameters specific to LTE network elements are covered in the 5620 SAM LTE

Parameter Reference.

Parameters specific to 1830 PSS network elements are covered in the 5620 SAM Optical

Parameter Reference.

The 5620 SAM online help system includes a Parameter Search Tool that allows you to

look up parameters or 5620 SAM and 5650 CPAM forms. See the 5620 SAM User Guide for

more information about using the Parameter Search Tool.

5620 SAM Statistics

Management Guide

The 5620 SAM Statistics Management Guide provides information about how to

configure performance and accounting statistics collection and how to view counters

using the 5620 SAM. Network examples are included.

5620 SAM Troubleshooting

Guide

The 5620 SAM Troubleshooting Guide provides task-based procedures and user

documentation to:

• help resolve issues in the managed and management networks

• identify the root cause and plan corrective action for:

• alarm conditions on a network object or customer service

• problems on customer services with no associated alarms

• list problem scenarios, possible solutions, and tools to help check:

• network management LANs

• network management platforms and operating systems

• 5620 SAM client GUIs and client OSS applications

• 5620 SAM servers

• 5620 SAM databases

5620 SAM Alarm Reference The 5620 SAM Alarm Reference provides a description of all alarms supported on the

5620 SAM, including LTE and optical alarms, the raising and clearing conditions of each

alarm, and the remedial action to fix the problem. The reference is organized by

network element type.

5620 SAM Glossary The 5620 SAM Glossary defines terms and acronyms used in all of the 5620 SAM

documentation, including 5620 SAM LTE documentation.

5620 SAM Network

Element Compatibility

Guide

The 5620 SAM Network Element Compatibility Guide provides release-specific

information about the compatibility of managed devices in 5620 SAM releases. This

document is updated regularly; always consult the latest version on OLCS

as described

in Documentation and resources on the web.

5620 SAM MPR documentation

5620 SAM MPR User Guide The 5620 SAM MPR User Guide describes how to discover, configure, and manage

9500 MPR and 9500 MPRe devices using the 5620 SAM. The guide is intended for network

planners, administrators, and operators and is to be used in conjunction with other

guides in the 5620 SAM documentation suite where management of 9500 MPR and

9500 MPRe devices does not differ from other network elements.

Alcatel-Lucent recommends that you review the entire 5620 SAM MPR User Guide

before you attempt to use the 5620 SAM in your MPR network.

5620 SAM LTE documentation

5620 SAM LTE Release

Description

The 5620 SAM LTE Release Description provides information about the LTE features

associated with the release.

Guide Description

(3 of 5)

Preface

xii September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

5620 SAM LTE ePC User

Guide

The 5620 SAM LTE ePC User Guide describes how to discover, configure, and manage

LTE ePC devices using the 5620 SAM. The guide is intended for LTE ePC network

planners, administrators, and operators and is to be used in conjunction with other

guides in the 5620 SAM documentation suite where management of ePC devices does not

differ from other network elements.

Alcatel-Lucent recommends that you review the entire 5620 SAM LTE ePC User Guide

before you attempt to use the 5620 SAM in your LTE network.

5620 SAM LTE RAN User

Guide

The 5620 SAM LTE RAN User Guide describes how to discover, configure, and manage

the Evolved NodeB, or eNodeB, using the 5620 SAM. The guide is intended for LTE RAN

network planners, administrators, and operators and is to be used in conjunction with

other guides in the 5620 SAM documentation suite where management of RAN devices

does not differ from other network elements.

Alcatel-Lucent recommends that you review the entire 5620 SAM LTE RAN User Guide

before you attempt to use the 5620 SAM in your LTE network.

5620 SAM LTE Parameter

Reference

The 5620 SAM LTE Parameter Reference provides a list of all LTE ePC and LTE RAN

parameters supported in the 5620 SAM.

5620 SAM LTE OSS

Interface Developer Guide

The 5620 SAM LTE OSS Interface Developer Guide provides information about

developing LTE OSS applications, including information about the 3GPP OSS interface

components and architecture, understanding the 5620 SAM-O schema in the context of

LTE, compliance with 3GPP standards, and typical operational scenarios.

5620 SAM optical documentation

5620 SAM Optical User

Guide

The 5620 SAM Optical User Guide describes how to discover, configure, and manage

optical devices using the 5620 SAM. The guide is intended for optical network planners,

administrators, and operators and is to be used in conjunction with other guides in the

5620 SAM documentation suite where management of optical devices does not differ

from other network elements.

Alcatel-Lucent recommends that you review the entire 5620 SAM Optical User Guide

before you attempt to use the 5620 SAM in your optical network.

5620 SAM Optical

Parameter Reference

The 5620 SAM Optical Parameter Reference provides a list of all optical device

parameters supported in the 5620 SAM.

5620 SAM-O documentation

5620 SAM XML OSS

Interface Developer Guide

The 5620 SAM XML OSS Interface Developer Guide provides information that allows you

to:

• use the 5620 SAM XML OSS interface to access network management information

• learn about the information model associated with the managed network

• develop OSS applications using the packaged methods, classes, data types, and

objects necessary to manage 5620 SAM functions

5650 CPAM documentation

5650 CPAM Release

Description

The 5650 CPAM Release Description provides information about the new features

associated with a 5650 CPAM software release.

5650 CPAM Release Notice The 5650 CPAM Release Notice provides important information about the 5650 CPAM

software release and corresponding 7701 CPAA software release, including outstanding

issues and restrictions. This document is not shipped with the on-product

documentation and must be obtained from OLCS

as described in Documentation and

resources on the web.

5650 CPAM User Guide The 5650 CPAM User Guide describes how to capture, inspect, visualize, and

troubleshoot IGP and BGP topologies using the 5650 CPAM.

7701 CPAA Hardware

Revision 1 Setup and

Software Installation

Instructions

The 7701 CPAA Hardware Revision 1 Setup and Software Installation Instructions

describes the hardware setup and software installation for the 7701 CPAA Hardware

Revision 1, the route analyzer component of the 5650 CPAM.

Guide Description

(4 of 5)

Preface

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xiii

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

Obtaining customer documentation

You can obtain 5620 SAM customer documentation:

• from the product

• on the web

On-product documentation

The 5620 SAM on-product customer documentation is delivered in HTML and PDF.

Choose Help→User Documentation from the 5620 SAM client GUI to open the help

system in a web browser. For best results, use Internet Explorer or Firefox.

The help system opens to the User Documentation Index, which provides a summary

of and links to all 5620 SAM customer documents.

Click on the Using the help system tab on the User Documentation Index page to find

usage tips for navigating and searching within the on-product customer

documentation.

You can return to the User Documentation Index at any time by clicking on the Home

icon, shown in Figure 1.

Figure 1 Home icon

Documentation and resources on the web

The 5620 SAM customer documentation is available for download in PDF format

from the Alcatel-Lucent Customer Support Center:

http://www.alcatel-lucent.com/myaccess

. If you are a new user and require access to

this service, please contact your Alcatel-Lucent support representative.

Release Notices and any other documents not delivered on-product are posted to this

site.

5620 SAM product alerts

Product technical alerts are used to communicate important information to customers

about released loads. You can view and subscribe to product alerts for the 5620 SAM

from the Alcatel-Lucent Customer Support Center.

7701 CPAA Hardware

Revision 2 Setup and

Software Installation

Instructions

The 7701 CPAA Hardware Revision 2 Setup and Software Installation Instructions

describes the hardware setup and software installation for the 7701 CPAA Hardware

Revision 2, the route analyzer component of the 5650 CPAM.

Guide Description

(5 of 5)

Preface

xiv September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

Working with PDFs

You can download PDFs of individual guides from the Alcatel-Lucent Customer

Support Center, or you can choose to download a zip of all PDFs for a particular

release.

You can use the Search function of Acrobat Reader (File→Search) to find a term in

a PDF of any 5620 SAM document. To refine your search, use appropriate search

options (for example, search for whole words only or enable case-sensitive

searching). You can also search for a term in multiple PDFs at once, provided that

they are located in the same directory. For more information, see the Help for

Acrobat Reader.

Documentation conventions

Table 2 lists the conventions that are used throughout the documentation.

Table 2 Documentation conventions

Procedures with options or substeps

When there are options in a procedure, they are identified by letters. When there are

substeps in a procedure, they are identified by Roman numerals.

Note — Users of Mozilla browsers may receive an error message

when opening the PDF files in the 5620 SAM documentation suite.

The offline storage and default cache values used by the browsers are

the cause of the error message.

Alcatel-Lucent recommends changing the Mozilla Firefox offline

storage or Mozilla 1.7 cache value to 100 Mbytes to eliminate the

error message.

Convention Description Example

Key name Press a keyboard key Delete

Italics Identifies a variable hostname

Key+Key Type the appropriate consecutive keystroke sequence CTRL+G

Key–Key Type the appropriate simultaneous keystroke sequence CTRL–G

* An asterisk is a wildcard character, which means “any

character” in a search argument.

log_file*.txt

↵ Press the Return key ↵

— An em dash indicates there is no information. —

→ Indicates that a cascading submenu results from selecting a

menu item

Policies→Alarm

Policies

Preface

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xv

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

Example of options in a procedure

At step 1, you can choose option a or b. At step 2, you must do what the step

indicates.

1 This step offers two options. You must choose one of the following.

a This is one option.

b This is another option.

2 You must perform this step.

Example of substeps in a procedure

At step 1, you must perform a series of substeps within a step. At step 2, you must

do what the step indicates.

1 This step has a series of substeps that you must perform to complete the step. You

must perform the following substeps.

i This is the first substep.

ii This is the second substep.

iii This is the third substep.

2 You must perform this step.

Measurement conventions

Measurements in this document are expressed in metric units and follow the Système

international d’unités (SI) standard for abbreviation of metric units. If imperial

measurements are included, they appear in brackets following the metric unit.

Table 3 lists the measurement symbols used in this document.

Table 3 Bits and bytes conventions

Measurement Symbol

bit b

byte byte

kilobits per second kb/s

Preface

xvi September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

Important information

The following conventions are used to indicate important information:

Warning — Warning indicates that the described activity or situation

may, or will, cause equipment damage or serious performance

problems.

Caution — Caution indicates that the described activity or situation

may, or will, cause service interruption.

Note — Notes provide information that is, or may be, of special

interest.

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xvii

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

Contents

Preface ix

Prerequisites............................................................................................ ix

5620 SAM documentation suite ...................................................................... ix

Obtaining customer documentation .............................................................. xiii

On-product documentation ......................................................... xiii

Documentation and resources on the web ....................................... xiii

Documentation conventions.........................................................................xiv

Procedures with options or substeps ...............................................xiv

Measurement conventions ........................................................... xv

Important information................................................................xvi

Getting started

1 — What’s new? 1-1

1.1 New 5620 SAM features for 9500 MPR/9500 MPRe devices ....................... 1-2

1.2 What’s new in 5620 SAM Release 11.0 .............................................. 1-2

2 — 9500 MPR/9500 MPRe overview 2-1

2.1 5620 SAM management of 9500 MPR/9500 MPRe devices......................... 2-2

MSS-1 shelf ............................................................................ 2-2

MSS-4 and MSS-8 shelves ............................................................ 2-3

9500 MPR/9500 MPRe card support................................................ 2-3

Fan tray................................................................................ 2-3

ODU..................................................................................... 2-3

XPIC .................................................................................... 2-3

Contents

xviii September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

9500 MPR LAG objects ............................................................... 2-3

9500 MPR services and service tunnel support .................................. 2-3

9500 MPR/9500 MPRe NEtO support ............................................... 2-4

9500 MPRe support................................................................... 2-5

2.2 Workflow to manage 9500 MPR/9500 MPRe devices ............................... 2-6

9500 MPR/9500 MPRe management

3 — 9500 MPR/9500 MPRe device commissioning and

management 3-1

3.1 9500 MPR/9500 MPRe device commissioning and management overview ...... 3-2

9500 MPR/9500 MPRe management ............................................... 3-2

9500 MPR radio link discovery and management ................................ 3-3

3.2 Workflow to commission 9500 MPR/9500 MPRe devices .......................... 3-5

3.3 9500 MPR/9500 MPRe device commissioning and management

procedures ........................................................................ 3-5

Procedure 3-1 To commission a 9500 MPR/9500 MPRe for 5620 SAM

management .................................................................... 3-6

Procedure 3-2 To configure polling for 9500 MPR/9500 MPRe

devices ........................................................................... 3-9

Procedure 3-3 To enable 5620 SAM management of

9500 MPR/9500 MPRe devices ................................................ 3-9

4 — 9500 MPR/9500 MPRe object configuration 4-1

4.1 9500 MPR/9500 MPRe object configuration overview ............................. 4-2

4.2 Workflow to configure and manage 9500 MPR/9500 MPRe device

objects ............................................................................. 4-2

4.3 9500 MPR/9500 MPRe device object configuration procedures .................. 4-2

Procedure 4-1 To configure system settings on a 9500 MPR .................. 4-2

Procedure 4-2 To resolve 9500 MPR MIB inconsistencies ...................... 4-3

Procedure 4-3 To start the 9500 MPR/9500 MPRe external element

manager from the 5620 SAM GUI............................................. 4-4

Procedure 4-4 To configure a scope of command role for NEtO

access ............................................................................ 4-5

5 — 9500 MPR LAG object configuration 5-1

5.1 Working with 9500 MPR device LAG objects ........................................ 5-2

9500 MPR device LAG objects ...................................................... 5-2

5.2 Workflow to configure and manage 9500 MPR device LAG objects ............. 5-3

5.3 9500 MPR device LAG configuration procedures ................................... 5-3

Procedure 5-1 To create a radio L1 or L2 LAG or Ethernet LAG on the

9500 MPR ........................................................................ 5-3

Procedure 5-2 To delete a 9500 MPR LAG ....................................... 5-5

Contents

Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5 September 2013 xix

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

6 — 9500 MPR/9500 MPRe shelf object configuration 6-1

6.1 9500 MPR/9500 MPRe shelf object configuration overview ...................... 6-2

6.2 Working with shelf objects on 9500 MPR/9500 MPRe devices.................... 6-2

6.3 Working with card and card slot objects on 9500 MPR/9500 MPRe

devices ............................................................................. 6-2

9500 MPR card support .............................................................. 6-3

6.4 Workflow to manage shelf objects on 9500 MPR/9500 MPRe devices........... 6-7

6.5 9500 MPR/9500 MPRe shelf object configuration procedures .................... 6-8

Procedure 6-1 To migrate the 9500 MPRe connected to a 7705 SAR

from standalone mode to single NE mode.................................. 6-8

Procedure 6-2 To manage the 9500 MPR/9500 MPRe running

software ........................................................................ 6-10

Procedure 6-3 To configure a 9500 MPR basic or advanced fan tray ....... 6-11

Procedure 6-4 To configure 9500 MPR card protection....................... 6-12

Procedure 6-5 To remove 9500 MPR card protection ......................... 6-13

Procedure 6-6 To switch between a 9500 MPR in-service protected

radio link and a standby protected radio link ............................ 6-13

7 — 9500 MPR/9500 MPRe port object configuration 7-1

7.1 9500 MPR/9500 MPRe port configuration overview ................................ 7-2

IMA support ........................................................................... 7-2

9500 MPR Ethernet port QoS schemes ............................................ 7-2

7.2 Workflow to manage port objects on 9500 MPR/9500 MPRe devices ........... 7-3

7.3 Port configuration procedures ........................................................ 7-4

Procedure 7-1 To configure 9500 MPR/9500 MPRe Ethernet ports .......... 7-4

Procedure 7-2 To configure 9500 MPR 2 × STM ports .......................... 7-6

Procedure 7-3 To configure 9500 MPR 1 × STM (Channelized) ports ........ 7-7

Procedure 7-4 To configure 9500 MPR E1 and DS1 ports ...................... 7-9

Procedure 7-5 To configure 9500 MPR DS3 ports ............................... 7-9

Procedure 7-6 To configure 9500 MPR AUX alarm ports...................... 7-10

Procedure 7-7 To configure a 9500 MPRe port................................. 7-11

Procedure 7-8 To configure analog performance management on

9500 MPR 1x radio modem ports ............................................ 7-12

Procedure 7-9 To configure power level performance management

on 9500 MPR 1x radio modem ports ........................................ 7-12

Procedure 7-10 To configure 9500 MPR port segregation .................... 7-13

Procedure 7-11 To configure 9500 MPR 2+2 × Ethernet (EAS) card

slot power source type ....................................................... 7-14

Procedure 7-12 To add 9500 MPR port protection ............................ 7-15

Procedure 7-13 To remove 9500 MPR port protection ........................ 7-16

Procedure 7-14 To configure a loopback test on a 9500 MPR DS1,

ES1, or 1 x radio modem port ............................................... 7-16

Contents

xx September 2013 Alcatel-Lucent 5620 Service Aware Manager, Release 11.0 R5

3HE 08459 AAAA TQZZA Edition 01

MPR User Guide

9500 MPR/9500 MPRe policy and service

management

8 — 9500 MPR/9500 MPRe QoS policies 8-1

8.1 9500 MPR/9500 MPRe QoS policies overview ....................................... 8-2

ATM QoS policies ..................................................................... 8-2

8.2 Workflow to configure 9500 MPR/9500 MPRe QoS policies ....................... 8-2

8.3 9500 MPR/9500 MPRe QoS policies procedures ..................................... 8-2

Procedure 8-1 To configure and distribute a 9500 MPR ATM QoS

policy............................................................................. 8-3

Procedure 8-2 To configure and distribute a 9500 Radio Interface

Queue Map policy .............................................................. 8-4

Procedure 8-3 To configure and distribute a 9500 NE QoS policy ........... 8-5

9 — 9500 MPR service management and service tunnels 9-1

9.1 9500 MPR service management overview ........................................... 9-2

Supported service types............................................................. 9-2

9500 MPR services support.......................................................... 9-3

9500 MPR/9500 MPRe service provisioning considerations and

constraints....................................................................... 9-5

9.2 9500 MPR service tunnel overview ................................................... 9-6

9500 MPR service tunnel (ERPS) support ......................................... 9-7

9.3 Ethernet (G.8032) rings ................................................................ 9-8

ERP topology .......................................................................... 9-8

9500 MPR ERPS tail node support on Ethernet (G.8032) rings................. 9-9

Supported ERP service types ...................................................... 9-10

9.4 Configuring service tunnels on 9500 MPR devices................................. 9-10

Procedure 9-1 To create an Ethernet radio ring element on a

9500 MPR ....................................................................... 9-10

10 — 9500 MPR VLAN service management 10-1

10.1 9500 MPR VLAN service management overview ................................... 10-2

Supported VLAN services types for 9500 MPR devices......................... 10-2

VLAN groups and paths ............................................................. 10-2

10.2 Workflow to create VLAN services on 9500 MPR devices ........................ 10-3

10.3 VLAN service management procedures for 9500 MPR devices .................. 10-4

Procedure 10-1 To create a VLAN group ........................................ 10-4

Procedure 10-2 To create a 9500 MPR VLAN path............................. 10-5

Procedure 10-3 To create a 9500 MPR (dot1q) VLAN service ................ 10-9

Procedure 10-4 To create a CoS rate limiter per VLAN on a

9500 MPR ..................................................................... 10-12

Procedure 10-5 To discover 9500 MPR VLAN services....................... 10-13

Procedure 10-6 To delete a VLAN group or group member ................ 10-13

Procedure 10-7 To delete a 9500 MPR VLAN path ........................... 10-14

Leht laaditakse ...

Alcatel-Lucent 5620 Kasutusjuhend

Alcatel-Lucent 5620 Kasutusjuhend

teistes keeltes

Muud dokumendid