1
GV-VPN
With the application of GV-VPN empowered by P2P VPN technology and the cloud-based
platform, GV-Cloud, users are allowed to create a virtual private network environment
enclosed for GeoVision Software running on separate PCs that are not under the same LAN.
It saves the trouble of separate router configurations and links the GeoVision Software to the
same virtual private network.
Note:
1. GV-VPN supports all GeoVision Software equipped with DDNS.
2. GV-VPN does not support the symmetric network environment or the network
environment with the UDP Broadcast disabled.
3. GV-VPN does not support for different GV-Software under the same LAN.
Contents
License ............................................................................................................................................ 2
Getting Started ............................................................................................................................... 3
1. Signing up on GV-Cloud ........................................................................................................ 3
2. Creating a VPN on GV-Cloud ................................................................................................ 4
3. Configuring GV-VPN ............................................................................................................. 6
4. Testing the Connection .......................................................................................................... 9
Demonstration: Connecting GV-Recording Server on GV-Edge Recording Manager Using
GV-VPN ........................................................................................................................................... 11
2
License
Free License
10 hosts
License Option
128 hosts, 256 hosts
Note:
1. For over 256 hosts, the increment for each license is 128 hosts.
2. Contact our sales representatives directly to purchase the license.
3
Getting Started
1. Signing up on GV-Cloud
It is required to create a VPN on GV-Cloud first for the configurations on GV-VPN later. To
create a VPN on GV-Cloud, follow the instructions below to sign up on GV-Cloud first.
1. On the Web browser (Microsoft Edge / Chrome / FireFox), visit the GV-Cloud webpage at
https://www.gvaicloud.com/.
2. Click Sign Up. This page appears.
3. Type the user’s Name, E-mail, Password, type the password again, and click Sign up.
You will receive a confirmation e-mail.
4. To confirm the e-mail account, click the activation link in the confirmation e-mail. You will
receive an additional e-mail confirming the success of GV-Cloud registration, along with
an account ID number. Keep the information for logging in GV-Cloud later.
4
2. Creating a VPN on GV-Cloud
After successfully signing up on GV-Cloud, follow the instructions below to log into GV-Cloud
and create a VPN.
1. On the Web browser (Microsoft Edge / Chrome / Firefox), visit the GV-Cloud webpage at
https://www.gvaicloud.com/.
2. Fill in the ID, E-mail, and password created at Step 3, 1. Signing up on GV-Cloud.
3. This page appears. Select VPN to access the VPN setup page.
4. On the VPN setup page, click the Add icon on the upper right corner to create a
VPN.
5
5. Type the ID, Password, Confirmation Password, optionally the Note for the VPN, and
verify the VPN ID in case it’s already in use. Keep the information for the configurations
on GV-VPN later.
6. Click Send.
The VPNs created will be display on the home page as shown below.
Name
Description
ID
The VPN ID created at Step 5.
Quantity
Available number of hosts for the connection.
Created Date
The date the specified VPN is created.
Expired Date
The expiration date for the license.
Note
The note added at Step 5.
Note:
1. You can optionally click the VPN on the list to modify its note and password.
2. For details on the license options, see the License section.
6
3. Configuring GV-VPN
After VPNs are created on GV-Cloud, run GV-VPN .exe on the same PC where GV-Software
is installed. On the GV-VPN setup page, fill in the information created and acquired at the
previous steps.
1
2
3
4
5
6
7
No.
Name
Description
1
LAN ID
The VPN ID created on GV-Cloud at Step 5, 2. Creating a VPN on
GV-Cloud.
2
Host Name
The desired host name for your GV-Software.
3
Password
The VPN password created on GV-Cloud at Step 5, 2. Creating a
VPN on GV-Cloud.
4
LAN IP
The desired IP address (198.18.x.x) for your GV-Software.
198.18.0.1 ~ 198.18.255.254 is available.
Note: Make sure your GV-Software is running when setting up the connection on GV-VPN.
7
After filling in the information above, click Connect. The following information will be
displayed for No.5 ~ No.7.
No.
Name
Description
5
Status
One of the following word strings will be displayed for different
connection statuses:
◼ Disconnect: The connection is not yet set up.
◼ Connecting: The connection is in process.
◼ Connected: The connection is set up.
◼ Login failed: You typed the incorrect LAN ID / Password.
◼ IP address is already in use: The IP address is already
occupied. Change the last two digits of LAN IP and try again.
6
Note
The message of “No GV Software Running” appears when no
GV-Software is detected running in the background.
7
NAT Type
One of the following word strings will be displayed for different
connection NAT types:
◼ Moderate: The network environment is applicable for
running GV-VPN.
◼ Restrict: The network environment is not applicable for
running GV-VPN and may lead to unstable connection.
◼ Exceed limit: The number of hosts exceeds the system
threshold.
◼ Unknown: The connection is undetectable. Make sure to
click Connect or check if the network environment is
detectable.
8
Note:
1. Different NAT types across separate PCs may affect the connection. See the table
below:
2. When encountering connection issues, check the router settings first.
9
4. Testing the Connection
When GV-VPN is configured and running on different PCs for different GV-Software, verify if
GV-Software can connect to each other via the created VPN on GV-Cloud. You can use
Command Prompt or Web browsers to ping and search for the presence of another
GV-Software in the created VPN.
[Command Port]
1. On the search bar of your PC, type cmd. Run the Command Prompt application.
2. Use one of the following 2 methods for the testing:
◼ LAN IP: On Command Prompt, type “ping <LAN IP>” using the IP address set for
GV-Software on the GV-VPN running on another PC and click Enter.
◼ Host Name: On Command Prompt, type “ping <Host Name>” using the Host Name
set for GV-Software on the GV-VPN running on another PC, and click Enter.
10
Ping results appear below the command if the connection is successful.
[Web Browsers]
On the Web browser (Internet Explorer / Microsoft Edge / Chrome / FireFox), type the LAN IP
(No. 1, 3. Configuring GV-VPN) in the URL bar.
The GV-Software login page appears if the connection is successful.
11
Demonstration: Connecting GV-Recording Server on
GV-Edge Recording Manager Using GV-VPN
To better demonstrate how to connect one GV-Software to another using GV-VPN, the
following steps illustrate detailed information involved in the setup process. Before proceeding,
make sure you have signed up on GV-Cloud and created a VPN on it. For details, see 1.
Signing up on GV-Cloud and 2. Creating a VPN on GV-Cloud.
1. On the GV-VPN installed on the PC that runs GV-Recording Server, fill in the following
information:
LAN ID
gv-test (The VPN ID created on GV-Cloud)
Host Name
RS1
Password
The VPN password created on GV-Cloud
LAN IP
198.18.1.1
2. Click Save, and the Status field will display Connected.
12
3. On the GV-VPN installed on the PC that runs GV-Edge Recording Manager, fill in the
following information:
LAN ID
gv-test (The VPN ID created on GV-Cloud)
Host Name
ERM
Password
The VPN password created on GV-Cloud
LAN IP
198.18.1.2
4. Click Save, and the Status field will display Connected.
5. On GV-Edge Recording Manager, click Add > Add Host > Add Recording Server
to add GV-Recording Server on the host list.
13
6. On the Host Settings dialog box, fill in the LAN IP / Host Name set for GV-Recording
Server (198.18.1.1 / RS1) at Step 1 in the Address field.
7. Click OK. The live view images of GV-Recording Server will appear on GV-Edge
Recording Manager.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Muud dokumendid
-
Technicolor TG650S Setup And User Manual
-
Telewell TW-EA514 Kasutusjuhend
-
Asus ROG Rapture GT-AX6000 EVA Edition Kasutusjuhend
-
Asus ROG STRIX GS-AX5400 Kasutusjuhend
-
-
Alcatel-Lucent 5620 Kasutusjuhend
-
HARVIA SENTIO pronet Instructions For Installation And Use Manual
-
-
Juniper JSA7800 Kasutusjuhend
-
Adobe 65021566 - Creative Suite 4 Design Premium Deployment Manual