Philips GC9940/05 Kasutusjuhend

Register your product and get support at

www.philips.com/welcome

GC9955, GC9950, GC9945, GC9940

1

GC9955, GC9950, GC9945, GC9940

EnGlish 6

 21

 37

 53

 69

 85

 101

 117

 132

 148

 164

 180

 197

 213

 229

 245

6



Introduction 6

General description 6

Important 7

Ironing 9

Steaming (GC9955 only) 12

Refreshing (GC9955 only) 14

Dual Protect Anti-calc system 15

Automatic shut-off 17

Storage 18

Environment 18

Guarantee 18

Premium service 19

Frequently asked questions 19



Congratulations on your purchase of the Wardrobe Care System and

welcome to Philips! We hope you will enjoy the use of this system.

Register your purchase now at www.philips.com/welcome and enjoy a range of

benets, including full support regarding your product (including maintenance

reminders), privileged access to information about new products, exclusive

offers and discounts, and participation in special surveys about new releases.



1 Package with new anti-calc cartridges

2 Steamer (GC9955 only)

3 Steamer storage compartment (GC9955 only) / Anti-calc cartridge

storage compartment (GC9950/GC9945/GC9940 only)

4 System power-on light

5 AUTO CALC CLEAN light

6 REPLACE CARTRIDGE light

7 Water tank release button

8 Water tank

9 Anti-calc cartridge

10 Rinse tray

11 Hanger hook (GC9955 only)

12 Refreshing button (GC9955 only)

13 Ironing board cover

14 Fan

15 Board handle

16 Board tilting button

17 Height adjustment lever

18 Locking strap

19 Iron compartment

20 Iron

21 Iron power-on button

22 Blowing button

23 Suction button

24 Soleplate

25 Steam trigger

26 ’Iron ready’ light

27 Mains plug

EnGlish



Read this user manual carefully before you use the appliance and save it for

future reference.

Tip: You can save the user manual in the iron compartment.



- Never immerse the iron, the steamer or the appliance in water.



- Check if the voltage indicated on the appliance corresponds to the

local mains voltage before you connect the appliance.

- Do not use the appliance if the plug, the mains cord, one of the supply

hoses or the appliance itself shows visible damage, or if the appliance

has been dropped or is leaking.

- If the mains cord or one of the supply hoses of this appliance is

damaged, you must have it replaced by Philips, a service centre

authorised by Philips or similarly qualied persons in order to avoid a

hazard.

- Never leave the appliance unattended when it is connected to the

mains.

- This appliance can be used by children aged 8 or above and by

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given instructions in

safe use of the appliance or supervision to establish safe use and if they

have been made aware of the hazards involved.

- Do not allow children to play with the appliance.

- Keep the iron, the steamer, the mains cord and the supply hoses out of

the reach of children aged 8 or under when the appliance is switched

on or cooling down.

- Never let the mains cord and supply hoses come into contact with the

hot soleplate of the iron.

- If steam escapes from the rinse tray during use, switch off the appliance

and contact a service centre authorised by Philips.



- Only connect the appliance to an earthed wall socket.

- Check the cord and the supply hoses regularly for possible damage.

- Never remove the ironing board cover while ironing or immediately

after use. Always let the appliance cool down sufciently before you

remove the cover.

- The soleplate of the iron can become extremely hot and may cause

burns if touched.

- When you have nished ironing or steaming, when you clean the

appliance and also when you leave the appliance even for a short while,

remove the mains plug from the wall socket.

- Do not move the appliance while it is in use.

- Do not use the appliance with very wet fabrics.

- Always place and use the appliance on a stable, level and horizontal

surface.

EnGlish 7

- Do not put a cloth, sheet or any other cover over the appliance

immediately after use.

- Always transport the appliance in storage position with the ironing

board folded and the locking strap properly secured.

- This appliance is intended for household use only. Do not expose the

appliance to atmospheric agents (e.g. rain, sun, cold).



- The uid in the anti-calc cartridge is not intended for drinking.

- Keep the anti-calc cartridge out of the reach of children

- Do not use the anti-calc cartridge if it is damaged.

- Throw away the used anti-calc cartridge with the normal household

waste at the end of its life.



- You can use normal tap water or de-mineralised water for your

Wardrobe Care system.

- Do not put perfume, vinegar, starch, descaling agents, ironing aids or

other chemicals in the water tank.



This Philips appliance complies with all standards regarding electromagnetic

elds (EMF). If handled properly and according to the instructions in this

user manual, the appliance is safe to use based on scientic evidence

available today.



This product has been tested and approved by independent textile experts

Woolmark, IWTO and DWI.

- The Woolmark logo is the most recognised textile symbol in the world.

It represents a long-term commitment to quality in wool and wool

apparel care products spanning more than 45 years.

The iron has been approved by The Woolmark Company Pty Ltd for the

ironing of wool-only products, provided that the garments are ironed

according to the instructions on the garment label and those issued by the

manufacturer of this iron. R1101

EnGlish8

In the United Kingdom, Eire, Hong Kong and India, the Woolmark

trademark is a certication trademark.

- The International Wool Textile Organisation (IWTO) is a World-leading

association specialising in animal fabrics like sheep wool, cashmere,

mohair, alpaca and angora.

“The Philips Wardrobe Care system is the ideal all in one ironing solution

for perfectionists. It is tted with the OptimalTemp technology which

delivers excellent ironing results, no risk of burns and it is so easy to use. It

is an amazing breakthrough, an ironing revolution.”’ - IWTO

- DWI is one of the world’s leading independent research institutes on

textiles and is afliated to RWTH Aachen University.



The steam generator of the Philips Wardrobe Care System is equipped

with the OptimalTemp technology which enables you to iron all types of

ironable fabrics without adjusting the iron temperature or steam setting.

- Fabrics with these symbols are ironable, for example linen, cotton,

polyester, silk, wool, viscose, rayon.

- Fabrics with this symbol are not ironable. These fabrics include synthetic

fabrics such as Spandex or elastane, Spandex-mixed fabrics and

polyolens (e.g. polypropylene), but also prints on garments.

1 Put the mains plug in an earthed wall socket.

EnGlish 9

, The system power-on light goes on.

2 Press the water tank release button (1) and remove the water tank

(2).

3 Fill the water tank with normal tap water and place the water tank

back into the appliance.

4 Undo the locking strap and unfold the ironing board to vertical

position.

5 Push the board tilting button and tilt the board to horizontal

position.

EnGlish10

6 Set the ironing board to the appropriate height with the height

adjustment lever.

7 Take the iron out of the iron compartment, either from the left or

the right side.

8 Press the iron power-on button to activate the steam generator.

, The ‘iron ready’ light starts to ash.

, After approx. 2 minutes the ‘iron ready’ light stops ashing and lights

up continuously to indicate that the steam generator is ready for use.

9 Press the steam trigger to start steam ironing.

Never direct the steam at people.

10 If you want to iron in the board blowing mode, press the blowing

button on the iron.

- The blowing mode provides a cushion of air that prevents shine and

seam imprints.

- The blowing mode cannot be switched off.

- The large ironing board is equipped with heating elements that heat

up in the ironing board. This allows easier, faster and more convenient

ironing.

EnGlish 11

11 If you want to iron in the board suction mode, press the suction

button on the iron.

- The suction mode cannot be switched off.

- The suction mode holds the garment at and neat on the board, and

makes perfect pleats on trousers.

- The large ironing board is equipped with heating elements that heat

up in the ironing board. This allows easier, faster and more convenient

ironing.

12 For the best result, you can use the shoulder-shaped end of the

ironing board when you iron a shirt. This special feature enables easy

ironing with less rearranging.

13 You can store the hot iron in the heat-resistant storage

compartment immediately after you have switched off the iron.



The steamer enables you to remove creases with only a few strokes. It is

easy to use, safe for all garments and is a great solution to delicate fabrics

like silk.

1 Put the mains plug in an earthed wall socket.

, The system power-on light goes on.

EnGlish12

2 Press the water tank release button (1) and remove the water tank

(2).

3 Fill the water tank with normal tap water and place the water tank

back into the appliance.

4 Undo the locking strap and unfold the ironing board to vertical

position.

5 Hang your garment for steaming on the hanger hook at the top of

your ironing board.

6 Take the steamer out of the steamer compartment.

7 Switch on the steamer by pressing the steamer power-on button.

The power-on light goes on.

8 Position the steamer head close and facing your garment, then press

the steam activator.

Never direct the steam at people.

Note: Move the steamer head up and down quickly for the best result.

9 If you want to steam in the blowing mode, press the rounded side

of the blowing/suction button. If you want to steam in the suction

mode, press the hollow side of the blowing/suction button.

EnGlish 13

10 You can easily hang the steamer on the board handle when

necessary.

11 You can store the hot steamer in the heat-resistant storage

compartment immediately after you have switched off the steamer.



1 Put the mains plug in an earthed wall socket.

, The system power-on light goes on.

2 Undo the locking strap and unfold the ironing board to vertical

position.

3 Press the refreshing button on the back of the ironing board.

, The appliance starts refreshing your garment.

EnGlish14

Note: This process takes 10 minutes and automatically stops.



The Philips Wardrobe Care System is equipped with a Dual Protect Anti-

Calc system that on the one hand prevents any possible scale from building

up inside the system and on the other hand removes scale particles from

the system. The Dual Protect Anti-Calc system consists of an anti-calc

cartridge and an automatic Auto Calc Clean process.



The anti-calc cartridge prevents scale from accumulating in the steam

generator.

During use, the granules of the anti-calc cartridge change colour. When the

granules have completely changed colour, you have to replace the anti-calc

cartridge.

The red REPLACE CARTRIDGE light starts ashing and you hear beeps to

indicate that the anti-calc cartridge needs to be replaced.

The Dual Protect Anti-Calc system automatically switches off the appliance

after 15 minutes and it cannot be switched on again until the anti-calc

cartridge has been replaced.



1 Press the water tank release button and remove the water tank.

Open the lid of the water tank (1) and remove the water tank cover (2).

2 Take the anti-calc cartridge out of the water tank and discard it.

EnGlish 15

3 Open the lid of the steamer storage compartment (1) and take out

the new anti-calc cartridge (2).

Note: The steamer compartment is designed to store one new anti-calc

cartridge.

Note: To maximise the lifetime of the anti-calc cartridge, leave it packed until

you use it.

4 Remove the packaging and place the new anti-calc cartridge in the

water tank.

Note: To purchase more anti-calc cartridges, go to the Philips online shop at

, or visit Philips online support and search for

GC019.



Note: The Auto Calc Clean process is automatically activated the rst time you

use the iron after you replaced the anti-calc cartridge.

The appliance cannot be used during the Auto Calc Clean process.

Do not interrupt the Auto Calc Clean process, otherwise the process

restarts.

1 When the Auto Calc Clean process is in progress, the blue AUTO

CALC CLEAN light ashes and the appliance beeps.

, This process lasts approximately 3 minutes.

, During this process it is normal for the system to produce pumping

and clicking sounds.

2 After approximately 3 minutes, rinsing water ows into the rinse tray

below. The beeping becomes faster and the red light on the rinse tray

ashes.

3 Pull out the rinse tray.

EnGlish16

4 Empty the water into the sink.

The rinse tray overows if you do not empty it before the next Auto

Calc Clean session.

5 Slide the rinse tray back into the appliance.

, The appliance stops beeping and the red light goes out.

6 The ‘iron ready’ light starts ashing to indicate that the appliance is

heating up.

, After approximately 2 minutes, the ‘iron ready’ light stops ashing to

indicate that the appliance is ready for use again.



- This appliance is equipped with an automatic shut-off function. When

the steam trigger is not used for more than 10 minutes, the appliance

automatically shuts off and goes into the standby mode. You hear a few

beeps and the light on the iron or steamer goes out.

1 To deactivate the automatic shut-off function, press the iron or

steamer power-on button once.

, The light on the iron or steamer ashes to indicate that the appliance

is heating up.

2 Wait for the light to stop ashing. When the light lights up

continuously, the appliance is ready for use again.

EnGlish 17



1 Fold the ironing board to storage position and lock the board with

the locking strap.

2 To store the cord, briey pull it towards you and then let it go. The

cord is wound up automatically.

3 You can now easily move the appliance by pulling it along by the

board handle.

Tip: After a long ironing session, it is advised to keep the ironing board folded

out to let it dry before you store it.



- Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an ofcial collection point for

recycling. By doing this, you help to preserve the environment.



Philips Consumer Lifestyle guarantees the Philips Wardrobe Care System

for a period of two years after the date of purchase. If any defect due to

faulty materials and workmanship occurs within this two-year guarantee

period, Philips Consumer Lifestyle repairs or replaces the product at its

expense. Philips Consumer Lifestyle will only pay for repair or replacement if

convincing proof is provided, for instance by means of a receipt that shows

that the day on which service is claimed is within the guarantee period.

EnGlish18



- The guarantee does not cover products and/or product parts that are

subject to wear or that can be considered consumable parts by their nature,

such as anti-calc cartridges and ironing board covers.

- If the appliance is used improperly or for professional or semi-professional

purposes or if it is not used according to the instructions in this user manual,

the guarantee becomes invalid and Philips refuses liability for any damage caused.

- The guarantee is not valid if a defect is due to damage caused by incorrect

use, poor maintenance or if alterations or repairs have been carried out by

persons not authorised by Philips Consumer Lifestyle.

Note: These guarantee restrictions do not affect your statutory rights.



We want to ensure that you remain satised with your Philips WardrobeCare

System. We would like to remind you to register your purchase on

www.philips.com/welcome so that we can stay in contact with you and

send you maintenance reminders.

If you have questions about your Wardrobe Care system, e.g. about its use,

maintenance or descaling, or if you need new anti-calc cartridges, please go to

www.philips.com/support or call the free local Philips hotline. You nd its phone

number in the separate guarantee leaet.

We have put maximum effort in designing, developing and testing this high-

quality product. In the unfortunate case that your Wardrobe Care system needs

repair, please contact the nearest authorised Philips service centre or call the free

local Philips hotline. They will help you arrange the repair in minimum time.



This chapter lists the questions most frequently asked about the appliance. If you

cannot nd the answer to your question, contact the Consumer Care Centre in

your country.

Question Answer

Why does the system

keep beeping and

ashing?

When the red REPLACE CARTRIDGE light ashes, the anti-calc cartridge has lost

its effectiveness and needs to be replaced. If you do not replace the used anti-calc

cartridge, the red REPLACE CARTRIDGE light stops ashing and the appliance stops

beeping. The Dual Protect Anti-Calc system automatically switches off the appliance

and it cannot be switched on again until the anti-calc cartridge has been replaced.

When the blue AUTO CALC CLEAN light ashes, the system is performing the Auto

Calc Clean process.

When the red light on the water tank ashes, there is not enough water or the water

tank is not placed in the water tank compartment properly. Fill the water tank and put

it back into the water tank compartment properly.

If the red light on the rinse tray ashes, the Auto Calc Clean process is nished. Empty

the rinse tray and place it back before you switch on the iron again.

Why does the iron or

steamer remain cold?

The iron or steamer is not switched on. Press the iron or steamer power-on button.

The Auto Calc Clean process may be in progress. Wait for the Auto Calc Clean process

to nish and then switch on the appliance again.

EnGlish 19

Question Answer

The automatic shut-off function may have been activated. The appliance is switched off

automatically when the steam generator has not been used for 10 minutes. Press the

iron or steamer power-on switch once to restart the appliance. It is ready for use when

the light on the iron or steamer stops ashing and lights up continuously.

Why doesn’t the iron

or steamer produce any

steam?

There may not be enough water in the water tank or the water tank is not placed in the

water tank compartment properly. Fill the water tank and put it back into the water tank

compartment properly.

The appliance may not be hot enough to produce steam. Heating up takes two minutes.

Wait until the light on the iron or steamer stops ashing and lights up continuously.

Then press the steam trigger to start steam ironing or press the steam activator to start

steaming.

You may not have pressed the steam trigger on the iron or the steam activator on the

steamer. Press the steam trigger to start steam ironing or press the steam activator to

start steaming.

The automatic shut-off function may have been activated. The appliance is switched off

automatically when the steam generator has not been used for 10 minutes. Press the

power-on light of the iron or steamer. It is ready for use when the light on the iron or

steamer stops ashing and lights up continuously.

Why does the appliance

produce noise?

It is normal to hear a pumping sound. When you hear an intermittent noise, water is

intermittently pumped from the water tank into the boiler.

When you hear a long pumping noise, the Auto Calc Clean process is in progress. This

is normal.

The noise you hear may be the sound of the fan. The appliance is equipped with a fan

that runs continuously during use.This fan optimises the performance of the appliance

and cannot be switched off.

If the pumping noises do not stop, rst check if the water tank is placed in the water

tank compartment properly. If this is the case but the noises still persist, switch off the

appliance and contact the Philips Consumer Care Centre or your Philips dealer.

Why are there water

droplets/wet spots on

the ironing board?

After a long ironing session, steam condenses inside the ironing board, causing wet spots

on the cover. After use, leave the ironing board folded out for some time to let it dry.

Why do water droplets

come out of the iron?

Water collects inside the supply hose of the iron or steamer and this water comes out

of the iron or steamer as water droplets during the rst few seconds of steaming at the

start of an ironing or steaming session and after an interruption during the session.

How do I know that I

have to replace the anti-

calc cartridge?

The anti-calc cartridge contains granules that gradually change colour during use. When

the colour has changed completely, the anti-calc cartridge is no longer effective and you

have to replace it. When the anti-calc cartridge needs to be replaced, the red REPLACE

CARTRIDGE light starts ashing and the system beeps.

Where can I buy new

anti-calc cartridges?

To purchase new anti-calc cartridges, go to the Philips online shop at

, or visit Philips online support and search for GC019.

Can I wash the ironing

board cover and the felt

underlay?

You can wash the ironing board cover in a washing machine, using the delicate cycle. Do

not wash the felt underlay in a washing machine. You can hand wash the underlay gently.

EnGlish20

Leht laadib ...

Philips GC9940/05 Kasutusjuhend

Philips GC9940/05 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid