SMART TV Quick Setup Guide
ENGLISH
P/NO : MBM63822503 (1302-REV00)
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the Operating System (OS).
Wireless Network Connection
wireless AP (Router)
LG wireless dongle
or
Wired Network Connection
Internet connection
Wired router
Please call LG Customer Service if you experience any problems.
ENGLISH
NETWORK SETTING
1
Press the SMART
REC
button to access the Smart
Home menu. Select Settings and press Wheel (OK).
Settings
More
More
Settings
2
Select the NETWORK
→
Network Connection
menu.
Network Connection
Network Status
Wi-Fi Direct
Miracast
TM
/Intel's WiDi
NETWORK
My TV Name : 42LA6400-DA
3
Select the Start Connection.
To use network, prepare the following items.
Network Connection
To connect to a wired network:
Connect a LAN cable to the back of TV.
To connect to a wireless network:
Requires a wireless router or access point.
Start Connection
or
4
The device automatically tries to connect to the
network available (wired network first).
Cancel
Connecting to the network.
Network Connection
If you select Cancel or it fails to connect to the
network, the network list available is displayed.
Choose the network you wish to use.
Choose the network you want.
Wired Network
Wireless : AAA
Wireless : BBB
Wireless : CCC
Wireless : 11111
Wireless : 22222
Manual Setup
Refresh Lis
t
Network Connection
For wireless AP (Router) that have the
ꔒ
symbol, you
need to enter the security key.
Network Connection
Wireless : AAA
Forgot your password? Contact your AP manufacturer.
Enter security key of network.
5 The connected network is displayed.
Select Complete to confirm the network connection.
If you select the Other Network List, the available
network list is displayed again.
Network is connected.
Wireless:AAA
Select [Other Network List] to connect to another network.
Complete
Other Network List
Network Connection
Troubleshooting Network Problems
1
Press the SMART button to access the Smart
Home menu. Select Settings and press Wheel (OK).
2
Select the NETWORK
→
Network Status menu.
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When an
appears on TV, but an X on Gateway.
1
Check the connection status of the TV, AP (Router)
and cable modem.
2
Power off and power on the TV, AP (Router) and
cable modem.
3
If you are using a static IP, enter the IP directly.
4
Contact internet companies or AP (Router)
companies.
Additional points to check when using a wireless
connection
1
Check the password for the wireless
connection in the AP (Router) settings window.
2
Change the AP (Router) SSID (network name)
or the wireless channel.
ENGLISH
NETWORK SETTING
4
The device automatically tries to connect to the
network available (wired network first).
If you select Cancel or it fails to connect to the
network, the network list available is displayed.
Choose the network you wish to use.
For wireless AP (Router) that have the
ꔒ
symbol, you
need to enter the security key.
Wireless : AAA
5 The connected network is displayed.
Select Complete to confirm the network connection.
If you select the Other Network List, the available
network list is displayed again.
Troubleshooting Network Problems
1
Press the SMART
REC
button to access the Smart
Home menu. Select Settings and press Wheel (OK).
Settings
More
More
Settings
2
Select the NETWORK
→
Network Status menu.
My TV Name : 42LA6400-DA
Network Connection
Network Status
Wi-Fi Direct
Miracast
TM
/Intel's WiDi
NETWORK
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
TV Gateway DNS Internet
Network Status
When an
appears on TV, but an X on Gateway.
1
Check the connection status of the TV, AP (Router)
and cable modem.
2
Power off and power on the TV, AP (Router) and
cable modem.
3
If you are using a static IP, enter the IP directly.
4
Contact internet companies or AP (Router)
companies.
Additional points to check when using a wireless
connection
1
Check the password for the wireless
connection in the AP (Router) settings window.
2
Change the AP (Router) SSID (network name)
or the wireless channel.
Check the AP (Router) or consult your Internet
service provider.
TV Gateway DNS Internet
Network Status
When an appears on TV and Gateway, but an
X on DNS.
1
Unplug the power cord of the AP (Router), cable
modem and try to connect after 5 seconds.
2
Initialize (Reset) the AP (Router) or cable modem.
3
Con
tact internet companies or AP
(Router)
companies.
TV Gateway DNS Internet
Network Status
When an appears on TV, Gateway and DNS,
but an X on Internet.
1
Unplug the power cord of the AP (Router), cable
modem and try to connect after 5 seconds.
2
Initialize (Reset) the AP (Router) or cable modem.
3
Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider. (The
MAC address displayed on the right pane of the
network status window should be registered with
your Internet service provider.)
4
Check the AP (Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.
Please call LG Customer Service if you experience any problems.
ENGLISH
Installation & Setting
Install the SmartShare PC SW (DLNA) and SmartShare PC SW (MediaLink) program on your PC.
1
Go to www.lg.com. Then, select your region.
2
Select SUPPORT. Then, search for your model.
3
Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW (DLNA)
4
You can run the program when installation is complete.
DLNA service is only available if TV and other devices are connected via a single AP (Router).
NOTE
Updating the TV Firmware
HOME
→
Settings
→
SUPPORT
→
Software Update
By default, the TV will notify you of new software updates. You can use the Software Update menu to manually
check for available updates.
Software Update Set it to On.
When an updated file is detected, the file is downloaded automatically.
Automatic Update Mode If an update is available, the update automatically starts without prompting.
Check Update Version Checks the latest update version installed. When a new update is available, the
download process can be performed manually.
DLNA Connection to Smartphone
1
Check that Wi-Fi is enabled on your smartphone. To use DLNA, both devices must on the same local network.
2
Install/run the app for sharing content on your smartphone (It's called SmartShare on LG phones).
3
Enable your smartphone to share content files with other devices.
4
Select the file type you want to play (movie, audio or photo).
5
Select a movie, music or photo file to play on the TV.
6
Add the selected file to the playlist.
7
Select a TV model name on which to play the files. (The TV model name is on a label on the side of the TV and
in the customer support menu.)
8
Play the media file to view and enjoy it on your TV.
Tag On
Tag On is a data transmission technology that can be used on smartphones with NFC
(Near Field Communication). Simply by tapping your smartphone to a Tag On sticker,
you can share content between your smartphone and TV.
• To connect your smartphone to the TV using Tag On, they must be connected on the
same Wi-Fi network or Miracast™/Intel’s WiDi of the smart TV is set to On.
- Do not attach the sticker to a metal part of the TV. Otherwise, your smartphone
cannot recognize the Tag On sticker.
-Do not crumple or fold the Tag On sticker. Otherwise, the Tag On is not recognized.
-To purchase a Tag On sticker, please contact the LG Electronics Service Center.
-This function is supported only on a smartphone with Android 4.0 (ICS) or later.
(Depending on model)
ENGLISH
Installation & Setting
Install the SmartShare PC SW (DLNA) and SmartShare PC SW (MediaLink) program on your PC.
1
Go to www.lg.com. Then, select your region.
2
Select SUPPORT. Then, search for your model.
3
Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW (DLNA)
4
You can run the program when installation is complete.
Updating the TV Firmware
HOME
→
Settings
→
SUPPORT
→
Software Update
By default, the TV will notify you of new software updates. You can use the Software Update menu to manually
check for available updates.
Software Update Set it to On.
When an updated file is detected, the file is downloaded automatically.
Automatic Update Mode If an update is available, the update automatically starts without prompting.
Check Update Version Checks the latest update version installed. When a new update is available, the
download process can be performed manually.
DLNA Connection to Smartphone
1
Check that Wi-Fi is enabled on your smartphone. To use DLNA, both devices must on the same local network.
2
Install/run the app for sharing content on your smartphone (It's called SmartShare on LG phones).
3
Enable your smartphone to share content files with other devices.
4
Select the file type you want to play (movie, audio or photo).
5
Select a movie, music or photo file to play on the TV.
6
Add the selected file to the playlist.
7
Select a TV model name on which to play the files. (The TV model name is on a label on the side of the TV and
in the customer support menu.)
8
Play the media file to view and enjoy it on your TV.
Tag On
Tag On
Tag On is a data transmission technology that can be used on smartphones with NFC
(Near Field Communication). Simply by tapping your smartphone to a Tag On sticker,
you can share content between your smartphone and TV.
• To connect your smartphone to the TV using Tag On, they must be connected on the
same Wi-Fi network or Miracast™/Intel’s WiDi of the smart TV is set to On.
- Do not attach the sticker to a metal part of the TV. Otherwise, your smartphone
cannot recognize the Tag On sticker.
-Do not crumple or fold the Tag On sticker. Otherwise, the Tag On is not recognized.
-To purchase a Tag On sticker, please contact the LG Electronics Service Center.
-This function is supported only on a smartphone with Android 4.0 (ICS) or later.
(Depending on model)
Please call LG Customer Service if you experience any problems.
ENGLISH
Wi-Fi Direct Setting
Miracast
TM
Setting
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
[Device Screen]
Connection
Miracast
TM
/ Intel's WiDi
Device Name
Connection
TAAAA
The device which is applied Miracast
TM
and intel's WiDi
technology can be shown on the TV.
MiracastTM / Intel's WiDi
a
On
1
Miracast should be set to 'ON' on your mobile device And TV.
Go to the Network settings to set the Miracast.
2
When your TV or portable device is detected, select the device.
HOME
→
Settings
→
NETWORK
→
Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct.
With Smart Share, you can share files or screens of devices connected to Wi-Fi
Direct
.
[TAAAA]
Do you want to request a connection?
Yes
No
Connection
Wi-Fi Direct
Device Name
Connection
TAAAA
BBBB
Wi-Fi Direct
a
On
Automatically connect without asking
1
If Wi-Fi
Direct
is set to On, a list of available devices
appears.
»
To use
Wi-Fi
Direct
, go to
Settings
→
NETWORK and
set Wi-Fi Direct (
a
) to
On
.
2
When you are prompted to request connection, select Yes.
Wi-Fi
Direct
is now connected to your TV.
*
If you are not using
Wi-Fi Direct
to minimize the interference between Wi-Fi devices, it is recommended to set
Wi-Fi Direct (
a
)
to Off. You can only use devices that support Wi-Fi
Direct
.
[Device Screen]
[TV Screen]
WiDi (Wireless Display) Setting
Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet network for
mirrored and dual monitor display on your TV. You can sit back and experience your favorite movies, videos, photos,
online shows and more in full HD on your TV with great image clarity and sound.
When you connect the TV and laptop, you should set up TV mode for “Live TV” and “ external input”.
If not, your computer cannot detect LG Smart TV.
1
Intel's WiDi is set to On. Connect your laptop to AP (Router). (Without AP, it is possible to use this function; it is
recommended to connect to AP.) Your laptop runs the Intel WiDi ( ) program.
2
It detects LG Smart TVs available, which supports WiDi. In the list, select the TV you want and click Connect.
Enter the number ( ) shown on the screen into the input field ( ) on your laptop and then click Continue.
(4-digit number: under WiDi 3.1.29, 8-digit number: above WiDi 3.5)
[TV Screen] [Notebook Screen]
3
The TV screen appears on the laptop screen. The wireless environment may affect the screen display. If the
connection is poor, the Intel WiDi connection may be lost.
* LG TVs do not need to register.
* TV sound setting for Digital Sound Out is set to PCM.
* For more information on Intel WiDi, visit 'http://intel.com/go/widi'.
* On the Intel's WiDi, WiDi device is not searched. Close the Intel's WiDi, then search WiDi.
* You can control your PC using the Magic Remote Control.
* Intel's WiDi laptop is not appeared in the Miracast /WiDi menu in TV network menu.
ENGLISH
Wi-Fi Direct Setting
Miracast
TM
Setting
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
1
Miracast should be set to 'ON' on your mobile device And TV.
Go to the Network settings to set the Miracast.
2
When your TV or portable device is detected, select the device.
HOME
→
Settings
→
NETWORK
→
Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct.
With Smart Share, you can share files or screens of devices connected to Wi-Fi
Direct
.
1
If Wi-Fi
Direct
is set to On, a list of available devices
appears.
»
To use
Wi-Fi
Direct
, go to
Settings
→
NETWORK and
set Wi-Fi Direct ( ) to
On
.
2
When you are prompted to request connection, select Yes.
Wi-Fi
Direct
is now connected to your TV.
*
If you are not using
Wi-Fi Direct
to minimize the interference between Wi-Fi devices, it is recommended to set
Wi-Fi Direct ( )
to Off. You can only use devices that support Wi-Fi
Direct
.
WiDi (Wireless Display) Setting
Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet network for
mirrored and dual monitor display on your TV. You can sit back and experience your favorite movies, videos, photos,
online shows and more in full HD on your TV with great image clarity and sound.
When you connect the TV and laptop, you should set up TV mode for “Live TV” and “ external input”.
If not, your computer cannot detect LG Smart TV.
NOTE
1
Intel's WiDi is set to On. Connect your laptop to AP (Router). (Without AP, it is possible to use this function; it is
recommended to connect to AP.) Your laptop runs the Intel WiDi (
Intel's WiDi is set to On. Connect your laptop to AP (Router). (Without AP, it is possible to use this function; it is
) program.
2
It detects LG Smart TVs available, which supports WiDi. In the list, select the TV you want and click Connect.
Enter the number (
a
) shown on the screen into the input field (
b
) on your laptop and then click Continue.
(4-digit number: under WiDi 3.1.29, 8-digit number: above WiDi 3.5)
[Intel Notebook] Request connection
Enter the following Security keys.
PIN****
Cancel
Remain: 92 second(s)
a
b
[TV Screen] [Notebook Screen]
3
The TV screen appears on the laptop screen. The wireless environment may affect the screen display. If the
connection is poor, the Intel WiDi connection may be lost.
* LG TVs do not need to register.
* TV sound setting for Digital Sound Out is set to PCM.
* For more information on Intel WiDi, visit 'http://intel.com/go/widi'.
* On the Intel's WiDi, WiDi device is not searched. Close the Intel's WiDi, then search WiDi.
* You can control your PC using the Magic Remote Control.
* Intel's WiDi laptop is not appeared in the Miracast /WiDi menu in TV network menu.
Please call LG Customer Service if you experience any problems.
ENGLISH
On-Screen Remote
To use the Universal Control function (It may not be available depending on the country/model.)
With the Magic Remote Control, you can easily control your set-top box, Blu-ray player, home theater system, and
Sound Bar.
1
Check if the device is connected to the TV.
2
After pressing the ' ' button on the Magic Remote Control, select the device you want to control in the
Change Device tab. The Screen Remote that can control the device appears.
3
You can control external devices using the Screen Remote on the screen.
(This may not work with the ' ' button for some models.)
»
a
:
Change Device tab
»
b
:
Device control buttons
»
c
:
Expand the ScreenRemote
»
d
:
Exits the Screen Remote
»
e
:
Moves the position of the
ScreenRemote to left or right
a
b
d
e
c
4
Control external devices using the navigation keys, wheel (OK) or BACK button on the Magic Remote Control.
External Device Menu
External Device Menu
Connexion à un réseau sans fil
Connexion à un réseau filaire
*Les illustrations peuvent différer légèrement de la réalité.
*L'image affichée sur un ordinateur ou un téléphone cellulaire peut varier selon le système d'exploitation.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
LG 55LA9650 Lühike juhend
- Tüüp
- Lühike juhend
- See käsiraamat sobib ka
teistes keeltes
- English: LG 55LA9650 Quick start guide
