Ubiquiti UFP-VIEWPORT Lühike juhend

Tüüp
Lühike juhend

See käsiraamat sobib ka

UniFi Protect ViewPort
Model: UFP-VIEWPORT
Package Contents
UniFi Protect
ViewPort
Mounting
Bracket
Double-Sided
Tape
HDMI Cable
M6 Screw M8 Screw Drywall Screws
(Qty. 2)
Screw Anchors
(Qty. 2)
System Requirements
UniFi Protect software TBD v1.X or above, available at
ui.com/downloads/unifi
Installation Requirements
Phillips screwdriver
Drill and 6 mm (1/4") bit for drywall anchors
Drill and 6 mm (1/4") bit or 8 mm bit (5/16") for screws
Shielded Category 5 (or above) cabling with drain wire
should be used for all wired Ethernet connections and
should be grounded through the AC ground of the PoE.
Hardware Overview
2
1
1
Power/Status LED
Color Status
Solid White Ready for conguration.
Blue
The device has been adopted by the UniFi
Protect Controller.
Alternating Blue/White The device is booting up.
2
Main Port
This 10/100/1000 RJ45 port connects to an 802.3af switch for PoE power
and data.
4
3
5
3
HDMI Port
This HDMI port connects to a TV or monitor with an HDMI cable. It
supports 1080p and 4K displays.
4
Secondary Port
This 10/100/1000 RJ45 port functions as a data pass-through port.
5
Reset Button
Restore to Factory Defaults Press and hold the Reset button for
5seconds while the device is powered on. Release the Reset button
when the LED turns off.
Hardware Installation
Mounting the UniFi Protect ViewPort is optional; it allows the
device to be installed in an inconspicuous and safe location.
You have three options for mounting:
Wall Mount Mount the ViewPort onto a drywall surface.
TV VESA Mount Mount the ViewPort to the back of your
TV/monitor using the available VESA mounting hole(s).
TV Surface Mount Attach the ViewPort to the TV/monitor
or other surface using the included double-sided tape.
Wall Mount
1.
2.
3.
4.
5.
TV VESA Mount
You can use this option if your TV or monitor is equipped with
a VESA mount that uses M6 or M8 screws.
1. Optional (for permanent mounting)
OR
M8 Screw M6 Screw
2.
OR
M8 Screw M6 Screw
3.
TV Surface Mount
1.
2.
3.
4.
Connecting the ViewPort
1.
2.
WARNING: The switch port must comply with the
power specifications listed in “Specifications.
Note: The PoE s
witch must be connected to the
same LAN or VLAN as the UniFi Protect controller
.
3.
4. Follow the instructions on the TV or monitor. (If nothing is
displayed, check the power source to the device.)
5. Log in to UniFi Protect. Enter the UniFi Protect username
and password. Then click Submit.
6. When UniFi Protect detects the ViewPort, click Add Device.
Specifications
UFP-VIEWPORT
Dimensions (With TV
Mount)
156.9 x 52 x 37.35 mm (6.18 x 2.0 x 1.47")
Weight
Without TV Mount
With TV Mount
230 g (8.11oz)
252 g (8.89 oz)
Enclosure Polycarbonate
Networking Interface 10/100/1000 Ethernet Port
Management Interface UniFi Protect Controller
Max. Power Consumption 9.5W
Power Method 802.3af PoE
Button Reset/Factory Reset
LED Power/Status
ESD/EMP Protection Air: ± 8kV, Contact: ± 4kV
Operating Temperature 0 to 40° C (32 to 104° F)
Operating Humidity 20 to 80% Noncondensing
Certications CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in a location that can
be submerged by water.
WARNING: Avoid using this product during an electrical
storm. There may be a remote risk of electric shock from
lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer’s label. Connection to a
different power source than those specified may result in improper
operation, damage to the equipment or pose a fire hazard if the
limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service
should be provided only by a qualified service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on
an individual basis, and, where applicable, specify arbitration instead of
jury trials or class actions.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This radio transmitter (FCC ID: SWX-UFPVP) has been approved by FCC.
ISED Canada
CAN ICES-3(B)/NMB-3(B)
This device complies with ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
This radio transmitter (IC: 6545A-UFPVP) has been approved by ISED
Canada.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Le présent émetteur radio (IC : 6545A-UFPVP) a été approuvé par ISDE
Canada.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum
distance 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
AVIS IMPORTANT :
Déclaration sur l’exposition aux rayonnements :
Cet équipement est conforme aux limites prévues pour l’exposition aux
rayonnements dans un environnement non contrôlé.
Lors de l’installation et de la mise en fonctionnement de l’équipement,
assurez-vous qu’il y ait une distance minimale de 20 cm entre l’élément
rayonnant et vous.
Cet émetteur ne doit être installé à proximité d’aucune autre antenne
ni d’aucun autre émetteur, et ne doit être utilisé conjointement à aucun
autre de ces appareils.
CE Marking
CE marking on this product represents the product is in compliance with
all directives that are applicable to it.
Country List
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
IE IT LV LT LU MT NL PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access) members noted in blue
Note: This device meets Max. TX power limit per ETSI regulations.
WEEE Compliance Statement
English
European Directive 2012/19/EU requires that the equipment bearing
this symbol on the product and/or its packaging must not be disposed
of with unsorted municipal waste. The symbol indicates that this
product should be disposed of separately from regular household waste
streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old
equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
Deutsch
Die Europäische Richtlinie 2012/19/EU verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem
Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall
entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt
von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es
liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische
und elektronische Geräte über die dafür zuständigen und von der
Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu
entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche Gesundheit
zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer
Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder
städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das
Produkt erworben haben.
Español
La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en
el propio aparato y/o en su embalaje no deben eliminarse junto con otros
residuos urbanos no seleccionados. El símbolo indica que el producto
en cuestión debe separarse de los residuos domésticos convencionales
con vistas a su eliminación. Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos
de recogida que ponen a su disposición el gobierno y las autoridades
locales. Al desechar y reciclar correctamente estos aparatos estará
contribuyendo a evitar posibles consecuencias negativas para el medio
ambiente y la salud de las personas. Si desea obtener información más
detallada sobre la eliminación segura de su aparato usado, consulte a las
autoridades locales, al servicio de recogida y eliminación de residuos de su
zona o pregunte en la tienda donde adquirió el producto.
Français
La directive européenne 2012/19/UE exige que l’équipement sur lequel
est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté
avec les autres ordures ménagères. Ce symbole indique que le produit
doit être éliminé dans un circuit distinct de celui pour les déchets des
ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout
autre matériel électrique ou électronique par les moyens de collecte
indiqués par le gouvernement et les pouvoirs publics des collectivités
territoriales. L’élimination et le recyclage en bonne et due forme ont pour
but de lutter contre l’impact néfaste potentiel de ce type de produits
sur l’environnement et la santé publique. Pour plus d’informations sur le
mode d’élimination de votre ancien équipement, veuillez prendre contact
avec les pouvoirs publics locaux, le service de traitement des déchets, ou
l’endroit où vous avez acheté le produit.
Italiano
La direttiva europea 2012/19/UE richiede che le apparecchiature
contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non
siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica
che questo prodotto non deve essere smaltito insieme ai normali rifiuti
domestici. È responsabilità del proprietario smaltire sia questi prodotti sia
le altre apparecchiature elettriche ed elettroniche mediante le specifiche
strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il
corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze
potenzialmente negative per l’ambiente e per la salute dell’essere umano.
Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti
pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel
quale avete acquistato il prodotto.
Declaration of Conformity
български [Bulgarian] С настоящото UBIQUITI декларира, че това устройство UFP-VIEWPORT е
в съответствие със съществените изисквания и други приложими разпоредби на Директиви
2014/53/EC, 2014/30/ЕС, 2014/35/ЕС. Цялостният текст на ЕС декларацията за съответствие
може да се намери на следния интернет адрес:
ui.com/compliance
Hrvatski [Croatian] UBIQUITI ovim putem izjavljuje da je ovaj uređaj UFP-VIEWPORT sukladan
osnovnim zahtjevima i ostalim bitnim odredbama Direktiva 2014/53/EU, 2014/30/EU,
2014/35/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi:
ui.com/compliance
Čeština [Czech] UBIQUITI tímto prohlašuje, že toto UFP-VIEWPORT zařízení, je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnic 2014/53/EU, 2014/30/EU,
2014/35/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese:
ui.com/compliance
Dansk [Danish] Hermed, UBIQUITI, erklærer at denne UFP-VIEWPORT enhed, er
i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiver
2014/53/EU, 2014/30/EU, 2014/35/EU. EU-overensstemmelseserklæringens fulde tekst kan findes
på følgende internetadresse:
ui.com/compliance
Nederlands [Dutch] Hierbij verklaart UBIQUITI, dat deze UFP-VIEWPORT apparaat, in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijnen
2014/53/EU, 2014/30/EU, 2014/35/EU. De volledige tekst van de EU-conformiteitsverklaring kan
worden geraadpleegd op het volgende internetadres:
ui.com/compliance
English
Hereby, UBIQUITI, declares that this UFP-VIEWPORT device, is in compliance with the
essential requirements and other relevant provisions of Directives
2014/53/EU, 2014/30/EU,
2014/35/EU
. The full text of the EU declaration of conformity is available at the following internet
address: ui.com/compliance
Eesti keel [Estonian] Käesolevaga UBIQUITI kinnitab, et antud UFP-VIEWPORT seade, on
vastavus olulistele nõuetele ja teistele asjakohastele sätetele direktiivide 2014/53/EL, 2014/30/EL,
2014/35/EL. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil:
ui.com/compliance
Suomi [Finnish] Täten UBIQUITI vakuuttaa, että tämä UFP-VIEWPORT laite, on yhdenmukainen
olennaisten vaatimusten ja muiden sitä koskevien direktiivien 2014/53/EU, 2014/30/EU,
2014/35/EU. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla
seuraavassa internetosoitteessa:
ui.com/compliance
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Ubiquiti UFP-VIEWPORT Lühike juhend

Tüüp
Lühike juhend
See käsiraamat sobib ka