ECG EDF 6023 WA Series Kasutusjuhend

EDF 6023 WA++

English

Deutsch

Čeština

Eesti keel

Latviešu valoda

Lietuvių kalba

Slovenčina

 Always read the safety&use instructions carefully before using your appliance for the rst time. The user´smanual must be always included.  Bitte lesen Sie vor der Inbetriebnahme des Produktes diese Anleitung und

die darin enthaltenen Sicherheitshinweise aufmerksam durch. Die Bedienungsanleitung muss dem Gerät immer beigelegt sein.  Před uvedením výrobku do provozu si důkladně pročtěte tento návod abezpečnostní

pokyny, které jsou vtomto návodu obsaženy. Návod musí být vždy přiložen kpřístroji.  Enne seadme esmakordset kasutamist lugege ohutus- ja kasutusjuhised alati hoolikalt läbi. Kasutusjuhend peab alati kaasas

olema.  Pirms ierīces pirmās lietošanas reizes vienmēr rūpīgi izlasiet drošības un lietošanas norādījumus. Rokasgrāmata vienmēr jāpievieno ierīcei.  Prieš naudodamiesi prietaisu pirmąjį kartą, visuomet atidžiai

perskaitykite saugos ir naudojimo instrukcijas. Kartu su gaminiu visada privalo būti jo naudotojo vadovas.  Pred uvedením výrobku do prevádzky si dôkladne prečítajte tento návod abezpečnostné pokyny, ktoré sú

vtomto návode obsiahnuté. Návod musí byť vždy priložený kprístroju.

DISHWASHER

INSTRUCTION MANUAL

TRAUKU MAZGĀJAMĀ MAŠĪNA

ROKASGRĀMATA

GESCHIRRSPÜLMASCHINE

BEDIENUNGSANLEITUNG

INDAPLOVĖ

INSTRUKCIJŲ VADOVAS

MYČKA NA NÁDOBÍ

NÁVOD KOBSLUZE

UMÝVAČKA RIADU

NÁVOD NA OBSLUHU

NÕUDEPESUMASIN

KASUTUSJUHEND

English

3

Dishwasher

CONTENTS

DESCRIPTION ........................................................................................................................................................................................45

Control panel ...................................................................................................................................................................................... 45

Dishwasher interior ..........................................................................................................................................................................46

INSTALLATION INSTRUCTIONS

......................................................................................................................................................46

Placement of the dishwasher

.......................................................................................................................................................46

Connecting the water supply hose

............................................................................................................................................46

Connecting the drain hose ............................................................................................................................................................ 47

Installation of the dishwasher under the kitchen worktop ...............................................................................................47

Power connection .............................................................................................................................................................................47

USER’S INSTRUCTIONS

...................................................................................................................................................................... 48

Prior to rst start of the operation

..............................................................................................................................................48

Water softener ....................................................................................................................................................................................48

Using detergent.................................................................................................................................................................................50

Rinse aid ...............................................................................................................................................................................................51

Filing the dishwasher baskets

......................................................................................................................................................52

STARTING THE DISHWASHER AND THE SELECTION OF THE WASH PROGRAM

.........................................................54

Turning on the dishwasher............................................................................................................................................................54

Changing program ...........................................................................................................................................................................54

Cancelling program .........................................................................................................................................................................55

Turning o the dishwasher

...........................................................................................................................................................55

Removing the dishes from the dishwasher

............................................................................................................................. 55

DESCRIPTION OF WASHING PROGRAMS

................................................................................................................................... 56

MAINTENANCE AND CLEANING

....................................................................................................................................................57

Filtration system ................................................................................................................................................................................57

Cleaning the spray arms ................................................................................................................................................................. 57

Water inlet hose lter ......................................................................................................................................................................57

TROUBLESHOOTING

..........................................................................................................................................................................58

Error codes...........................................................................................................................................................................................58

TECHNICAL SPECIFICATIONS..........................................................................................................................................................60

Dishwasher

English

4

SAFETY INSTRUCTIONS

Please read carefully and keep for future reference.

Warning: The safety measures and instructions contained in this manual do not include all potential conditions

and scenarios. The user must understand that common sense, caution and care are factors that cannot be

integrated into aproduct. Therefore, the user is responsible for these factors when using and operating this

appliance. We are not liable for any damages caused during shipping, by incorrect use, voltage uctuation or

the modication or adjustment of any part of the appliance.

Always, when using electrical appliances, you should follow basic precautions including the following

measures to prevent the risk of re or electric shock:

• This appliance can be used by children ages 8 and older and by the physically and

mentally impaired or by individuals with insucient experience and knowledge, if

supervised or trained to use the appliance in asafe manner and understand the risks

involved with the improper use of the appliance. Children must not play with the

appliance. Cleaning and maintenance operations performed by the user shall not

be carried out by children, if they are not older than 8 years and under supervision.

• Do not force open the door or the baskets for dishes, do not sit on the door and do not step on it.

• Do not touch the heating element after nishing the washing.

• Do not start the dishwasher until it is properly seated. If the dishwasher is running, open the door very carefully because

of the risk of scalding.

• Do not place heavy objects on the open door, the dishwasher could tip over.

• When you put in the dishes for washing:

1. Place sharp-edged objects so that they do not damage the door seal.

2. Attention: Knives and similar sharp objects must be put into baskets horizontally or with sharp edges downward.

• When using the dishwasher, make sure that the plastic items cannot come into direct contact with heating elements.

• After the end of the washing cycle, check, if the detergent dispenser is empty.

• Do not wash plastic dishes in the dishwasher that are not identied as suitable for adishwasher. .

• Use only detergents and rinse aids designed for dishwashers.

• Use only detergents and rinse aids designed for automatic dishwashers. Never use soaps, laundry detergents or

detergents for manual washing.

• Protect your appliance from children.

• Prevent children from coming into contact with washing detergent. Do not let them come close to the open door, inside

may still be residues of detergent.

• The detergents are strongly alkaline and their ingestion can be extremely dangerous! Prevent contact with skin and eyes.

When the door is open, prevent children to come close to the dishwasher.

• Do not leave the door open, you can easily trip over it.

• If the power cable is damaged, it may be replaced only by the manufacturer, service technician or other qualied person,

to avoid the risk of electric shock.

• Ensure ecological liquidation of the packaging material.

• Use the dishwasher only for the purpose for which it was designed.

• The power cable may not be pulled, bent or overloaded during installation. Do not touch the controls before installation.

• When installing connect anew set of hoses, old hoses should not be used again.

• If there are ventilation openings on the bottom of the appliance, they must not be covered by acarpet.

• The appliance is intended for household use. Commercial use will void the warranty.

GROUNDING OF THE APPLIANCE

• This appliance must be grounded. In the event of afailure or accident, grounding reduces the risk of electric shock. The

appliance is equipped with athree core power cable with aplug with grounding contact. In accordance with local laws

and directives, the power cord must be connected to aproperly grounded power outlet. Improper connection of the

grounding conductor may increase the risk of electric shock.

• If you are not convinced about proper grounding of the appliance, contact aqualied technician. If the power cord plug

of the device does not match your wall outlet, ask aqualied technician for replacement.

English

5

DESCRIPTION

Control panel

1234

765

1. Door handle

The handle is for opening and closing the door of the dishwasher.

2. Delay start button and half loads

Press the button repeatedly to delay the start of washing by 3, 6 or 9 hours. You can activate the half load

function when you press and hold the button (2) for 3 seconds.

3. Start/Pause button

Press Start/Pause to start a program selected using the program selector (4). The status indicator for

washing lights up. If the program stops when the washing light indicator is on, the indicator button Start/

Pause ashes.

4. Switch / Program selector

Using the selector you can choose the best program for your dishes. The dishwasher is turned o in the

O position.

5. Program progress indicator

Using the indicators “Washing/Drying/End” you can follow the progress of the program.

• Wash

• Drying

• Exit

6. Low salt indicator

If the amount of softening salt in the dishwasher is low, the indicator lights up. In that case, add salt.

7. Low rinse aid indicator

If the rinse aid in the dishwasher is low the indicator lights up. In that case, add the rinse aid.

English

6

Dishwasher interior

1. Top plate

2. Upper basket with compartments

3. Upper spray arm

4. Bottom basket

5. Bottom spray arm

6. Filters

7. Rating plate

8. Control panel

9. Detergent and rinse aid dispenser

10. Cutlery basket

11. Water softener

12. The running rail of the upper basket

INSTALLATION

INSTRUCTIONS

WARNING!

• Entrust the dishwasher connections for power supply and water supply to qualied professionals.

• The appliance must not stand on the supply or drain hose or on the electrical power cable.

• The dishwasher must be connected to awater supply with anew set of hoses. Do not use an old supply

hose.

Placement of the dishwasher

• Before installation, unpack the dishwasher and dispose of all packaging according to label instructions,

and make sure that there is no damage caused by transportation. If you nd any damage, stop the

installation and contact the vendor.

• Do not install the dishwasher in places, where the temperature may dip below 0 °C.

• When choosing aplace for the dishwasher, make sure that you can load and unload dishes easily.

• Place the dishwasher close to water supply and drain.

• When moving the dishwasher, do not lift it holding the door or the front panel.

• The dishwasher can also be inserted under your kitchen counter. Be careful when inserting the dishwasher

in place that you do not squeeze the supply and drain hoses. Make sure that the dishwasher is not standing

on the power cable.

• Place the dishwasher on aat hard oor. Use the adjustable feet to align the dishwasher into ahorizontal

position. The level horizontal position ensures greater stability, prevents movement of the appliance and

limits vibration and noise. Correct positioning of the dishwasher will also make the opening and closing

of the door easier.

• If the dishwasher door does not close correctly, make sure the dishwasher is stable and level and if

necessary adjust the level using the adjustable levelling feet.

Connecting the water supply hose

1. The water pressure must be in the range of 0,03 to 1,0 MPa. If the

water pressure is lower, contact atechnician.

2. Make sure that the supply hose is not bent or twisted.

3. If the water pipes are new or have not been used for along time,

have at rst ow out enough water until completely clean water

comes out.

4. Attach the hose to the water supply and tighten ttings.

5. Check the tightness of the connection.

6. Open the water supply tap fully before using the dishwasher.

1

2

3

5

6

7

8

9

10

11

12

4

English

7

Note: Some models use a safety hose with Aquastop system, which in case of failure of the appliance or

damage to the hose interrupt the water supply. Never adjust the hose and prevent it being pinched or

broken.

Connecting the drain hose

Connect the drain hose to the drain pipe and make sure that the

hose does not bend or twist. If the drain hose is too short, contact

an authorized service center to request a longer hose of the

same material. Keep in mind that the hose must not be even

with an extension longer than 4 meters. A longer drain hose

would prevent proper functioning of the dishwasher. Attach the

hose rmly to the drain pipe so that it will not loosen during the

operation of the dishwasher.

Connecting to the sink siphon

The waste connection must be placed at a height of between

50 cm (minimum) and 100 cm (maximum) above the bottom of the dishwasher. The drain hose should be

attached by aclamp. The free end of the hose must not be submerged in water.

Installation of the dishwasher under the kitchen worktop

If you want to put your dishwasher under the worktop, make sure that there is

enough space under the worktop and the layout of the electrical and water lines

permits this installation. If you consider the space under the kitchen worktop

suitable for installation of the dishwasher (see g. 1), remove the top plate of

the dishwasher, see g 2.

Attention: The space into which you place the dishwasher with top plate

removed should be stable, so that it does not adversely aect the

stability of the dishwasher.

To remove the top plate of the dishwasher, remove the screws with which the

plate is attached to the rear wall of the dishwasher. Then push the top plate 1 cm to the back and remove it.

Use the adjustable feet to align the tilt of the oor (see g. 3). Insert the dishwasher in the prepared space in

the kitchen worktop. Be careful not to pinch the hose or the power cord.

Attention: When you remove the top plate, you can place the dishwasher in the space with dimensions

marked in the gure 4.

Power connection

Before connecting the plug of the power cord into an electrical outlet, check the following:

• The outlet is grounded and complies with current standards.

• The outlet is suitable for the maximum power of the appliance, which is indicated on the rating plate.

max1100mm

min500mm

min120mm

min 40mm

English

8

• The outlet voltage corresponds to the one on rating plate of the appliance.

• The type of outlet matches the type of plug of the power cord of the appliance. Otherwise, ask an

authorized technician to replace the improper outlet. Do not use extension cords or power strips to

connect the dishwasher.

WARNING

• After installation keep the instruction manual.

• The manual contains important information.

USER’S INSTRUCTIONS

Prior to rst start of the operation

1. Before starting the dishwasher, you need to check the following items.

• The dishwasher stands straight and rm.

• The intake valve is open.

• Hose connections do not leak water.

• The power cable is properly connected.

• The outlet is powered.

• The supply and drain hoses are not pinched or twisted.

• All packaging and labels are removed from the dishwasher.

2. Set the water softener.

3. Pour 1 kg of salt in the salt dispenser and ll it to the brim with water.

4. Fill the rinse aid dispenser.

5. Fill the detergent dispenser.

Water softener

The dishwasher requires soft water for proper functioning, that means water with

minimum calcium content. Otherwise, limescale deposits may remain on the dishes

and on the inner surfaces of the appliance. Hard water aects negatively the eciency

of washing, drying and rinsing. The water owing through the softener is deprived of

ions causing hardness and is softened to alevel needed to achieve optimal results. The

hardness of your water depends on the speed with which these ions accumulate in the

water softener system. It is therefore necessary to regenerate the softener system so that

it always keeps maximum eciency. Salt added to the softener dispenser serves this

purpose.

• Use only the salt, which is intended for dishwashers. Other types of salts, which

are not intended for dishwashers, for example kitchen salt would damage the water

softener. In case of damage caused by the use of the wrong salt, the manufacturer is

not liable for the damages.

• Top up the salt, if possible, immediately before starting one of the complete washing

programs. You will prevent corrosion due to left over salt crystals or overowed

solution on the bottom of the dishwasher.

Addition of salt to water softener

The salt dispenser is located under the bottom basket. Fill according to the following

description:

1. Remove the bottom basked and then unscrew and remove the lid of the salt dispenser

1.

2. If you ll the dispenser for the rst time, put in 1 kg of salt 2 and ll it to the brim with

water 3. Use afunnel 4 to make adding salt easier. Put back the lid and tighten it.

3. Fill the salt dispenser after about 20 to 30 washing cycles (about 1,5 kg). Fill it with

water only before rst use.

English

9

4. We recommend that you use nely ground or powdery salt. Do not use salt tablets in the appliance, the

function of the softener could in such a case deteriorate over time.

5. When the dishwasher is running, the space lls with water, therefore add salt before starting the dishwasher.

The overowed saline solution is immediately rinsed away under the wash program. If immediately after

adding salt you are not going to wash the dishes, run a short program with an empty dishwasher to

prevent corrosion caused by spilled saline solution.

6. You can verify if there is enough salt in the dispenser by looking through the viewing window in the lid

of the dispenser. The amount of salt is sucient, if the window is green. Otherwise, you have to add salt.

Setup of the softener

The eciency of the dishwasher depends on the water hardness. Therefore the dishwasher is equipped with

asystem which reduces the hardness of the tap water. Proper setup of the system increases the eciency of

washing. You can obtain the information about the local water hardness from your supplier or you can nd the

hardness using testing paper (if included).

1. Open the testing paper package.

2. Leave the tap water running (for about 1 minute).

3. Dip the testing paper in the water for 1 second.

4. After you take out the test paper, shake it in the air and wait for 1 minute.

5. Set the softener according to the values measured by the test paper.

Level 1

Without calcium

Level 2 Very low calcium content

Level 3 Low calcium content

Level 4 Medium calcium content

Level 5 Higher calcium content

Level 6 High calcium content

Setting water hardness table

Harness

degree

German

scale (dH)

French scale

(dH)

British scale

(dH)

Hardness indicator

1 0-5 0-9 0-6 The wash indicator is on.

2 6-11 10-20 7-14 The end of program indicator is on.

3 12-17 21-30 15-21 The Start/Pause indicator is on.

4 18-22 31-40 22-28 The wash and end of program indicators are on.

5 23-31 41-55 29-39 The wash and Start/Pause button indicators

are on.

6 32-50 56-90 40-63 The end of program and the Start/Pause button

indicators are on.

Notes:

• If the water hardness is above 90 dF (French hardness scale) or when using spring water, we recommend

using alter or water treatment devices.

• The factory water hardness level is 3.

English

10

The procedure to set the water hardness

Based on water hardness test, set the softener according to the hardness of tap water as follows.

• Set the program selector/switch (4) in the position 1.

• Press and hold the button Start/Pause (3).

• By turning one step clockwise set the program selector/switch (4) to position 2.

• Keep the Start/Pause button (3) pressed until all indicators start ashing. After that the hardness indicator

appears, which shows apredened state (see chart on previous page).

• Now you can repeatedly press the Start/Pause button (3) to change the settings according to the water

hardness setting table.

• Once you set your desired hardness, switch o the appliance by turning the program selecto /o switch (4)

to position 1. The last selected water hardness setting will be saved.

Attention:

In case that you move house, adjust after moving again the water hardness according to the water

quality in your new home. This is necessary for optimum dishwashing.

Using detergent

The detergent contains chemicals necessary to dissolve and remove dirt from dishes and wash them out of the

dishwasher. For these purposes are suitable most of the quality generally available detergents.

Proper use of detergent

Use only detergents designed for use in dishwashers. Store detergents in adry and clean place. Add detergent

in the dispenser only immediately before you start to wash dishes. Fill the dispenser with the necessary

amount of detergent only. Excessive amount of detergent can cause scratching of glasses and may lead to

poor dissolution of the detergent. Contact the detergent manufacturer for more information.

Filling the detergent dispenser

1. If the dispenser lid is closed, push on the latch to open it, see gure 1.

2. The dispenser compartment is provided with marks, which allow to measure

the amount of the detergent. You can ll in the dispenser at maximum 40 cm

3

of

detergent.

3. When you open the dispenser pour in the larger compartment B25 cm

3

of the

detergent (in case of heavily soiled dishes) or 15 cm

3

(in case of less soiled dishes),

see gure 2.

4. When the dishes were left for along time without being washed and the residue

of food dried or if the dishwasher is lled to the maximum, pour 5 cm

3

of the

detergent in the prewash compartment Aand start the dishwasher.

• Depending on the degree of soiling and the water hardness you may have to

add more detergent.

5. Close the lid of the dispenser and press it to close.

Using combination tablets “3 in 1”

General recommendations

These products are detergents with integrated rinse aid and softener (salt). In case of tablets 2in1 you have to

watch what ingredients the tablets contain (if detergent + rinse aid or detergent + salt).

Generally, combination products are suciently eective only under certain conditions, because they contain

apredetermined amount of detergent and rinse aid / salt.

English

11

What is necessary to consider:

1. You should make sure prior to using these products that the hardness of your water allows the use of the

tablets (see the recommendation of the manufacturer on the product package).

2. These products should be used exactly according to the manufacturer’s instructions.

3. If these combination products are in tablet form, never place them freely into the dishwasher or the cutlery

basket. Put them always in the detergent dispenser.

4. If you encounter problems when using the product “3 v1” contact the customer support of the tablets

manufacturer.

Notes:

• If you want to achieve better results when using combined detergent products ll the dishwasher with salt

and rinse aid and set the water hardness and rinse aid dosage to lowest values.

• The solubility of the detergent tablets from dierent manufacturers can vary depending on temperature

and time, therefore we do not recommend using these detergents in short programs. Powder detergents

are preferable for shorter programs.

When you decide not to use the detergent tables any more

1. Fill the salt and rinse aid dispensers.

2. Set the water hardness to the highest level and run awashing program on empty.

3. Set the correct water hardness value.

4. Set the matching rinse aid dosage.

Rinse aid

The rinse aid function

Rinse aid is automatically dispensed for the nal polishing process and prevents spotting and streaking

upon drying. Contrary to widespread opinion, it is used not only to achieve more polished dishes, but it also

increases the eciency of drying. Therefore you should take care that in the dispenser is sucient amount of

the rinse aid.

Fill and set the rinse aid dispenser

1. Open the dispenser by turning the lid and then remove the lid 1.

2. Pour carefully the rinse aid in the dispenser, until the rinse aid level indicator 2 darkens.

3. Insert the lid back and turn it to tighten it in place.

4. If after washing are on the dishes drops of water or chalky stains, increase the rinse aid

dosage. If there appears on the dishes white, sticky spots or on the knives and glass

bluish coating, reduce the rinse aid dosage. You can set the dispenser 3 in the range

1 to 6. The dispenser is set by the manufacturer to level 3.

When to add the rinse aid

Dark indicator B means that there is enough rinse aid in the dispenser, while light

indicator Awarns about the necessity to add rinse aid in the dispenser.

Notice

• Wipe with absorbent cloth the rinse aid spilled during replenishing, to prevent excessive

foaming during the next wash. Use only brand name rinse aids for the dishwasher. Do

not ll the rinse aid dispenser with other substances. The dishwasher could be damaged.

1

3

English

12

Filing the dishwasher baskets

You will achieve the best cleaning results if you follow these instructions. The function and the appearance of

the baskets can vary according to the model of the dishwasher.

Inserting and removing dishes from the baskets

• Remove larger food leftovers from the dishes. Let the pans with burnt leftovers soak. It is not necessary to

pre -rinse the dishes under running water.

• Load the objects in the dishwasher as follows:

– Objects such as cups, glasses, pots, bowls, etc. put in bottom up.

– Lay diagonally the dishes curved or arched portions to allow water to run

out.

– Arrange all the object so that they cannot be overturned.

– Arrange all objects so that the spray arms can move freely.

– You can distribute tablespoons and teaspoons among the cutlery to

prevent them from sticking together.

• Place the glasses with long stems so that they lean on the edge of the basket

or glass holder, not the on other items in the dishwasher. Do not let the tall

glasses lean against each other, such aposition is not stable and they could

be damaged.

• You should not put very small objects in the dishwasher; they could fall through

the basket.

• To avoid the risk of injury, keep sharp objects with a long handle (e.g. serving

fork or bread knives) edge downwards or horizontal.

• When loading the dishwasher, the bottom and the upper basket should not be

pulled out simultaneously to prevent overturning.

Filling the upper basket

The upper basket is designed for smaller and more fragile items such as glasses,

mugs, cups and saucers, plates, bowls and shallow bowls (if they are not too dirty).

Load the dishes and the cutlery in such away that they cannot be overturned by

streaming water.

You can see an example of asuitable arrangement of dishes in the upper basked

in the gure 1.

Filling the bottom basket

Larger objects and objects that are dicult to clean, i.e. pots, pans, lids, plates and

bowls, should be placed in the bottom basket. We recommend to put the plates

and the lids on the sides of the basket so as not to impede the rotation of the upper

spray arm. Pots, bowls, etc. must always be placed upside down. Deep pots are

loaded on slant to allow water to run out of them. You can see examples of suitable

arrangement of dishes in the bottom basket in the gures 2 and 3.

Collapsible dish holders

The upper basket is equipped with dish holders (A and B), which you can use in

the open or closed position. You can place cups on them in the open position A. You

place tall glasses on the in the closed position B. You can also use them for placing

long forks, knives or spoons lengthwise.

Figure 2

Figure 1

Figure 3

English

13

Examples of unsuitable arrangement of dishes

Dishes unsuitable for washing in the dishwasher

Entirely unsuitable Not recommended

Cutlery with handles of wood, porcelain, horn or

mother of pearl.

Plastic dishes which are not heat resistant.

Cutlery with glued parts that are not heat resistant.

Glued dishes and cutlery.

Tin and copper objects.

Crystal glass.

Steel objects, which corrode.

Wooden boards.

Objects made of synthetic bres.

Certain types of glass, which may be tarnished after

repeated washing.

Silver and aluminium parts which tend to lose color

during washing.

Glazed patterns may fade when frequently washed

in adishwasher.

NOTES

• Do not insert objects soiled by cigarette ash, wax or paint. When buying anew kitchen equipment, make

sure that it is suitable for dishwasher.

• Never overload the dishwasher. Do not use dishes that are not suitable for use in dishwashers. Only in this

way you will get good results and save energy.

WARNING

• Make sure that no object can pass through the basket bottom.

• Always load sharp objects with blades downward!

Damage to glasses and other dishes

Possible causes:

• Unsuitable type of glass or product. Chemical composition of the detergent.

• Unsuitable water temperature and length of the program.

Recommended solutions:

• Use glass and china marked by the manufacturer as dishwasher safe.

• Use ne detergents designed for the appropriate dishes. If necessary, ask the detergent manufacturer for

more information.

• Select program with lower temperature.

• Remove glass and cutlery out of the dishwasher as soon as possible after washing to prevent possible

damage.

English

14

STARTING THE DISHWASHER AND THE SELECTION OF THE WASH PROGRAM

Turning on the dishwasher

1. Using the selector, choose

aprogram suitable for your dishes.

2. Press Start/Pause to start the

program.

When you turn the program selector,

the Start/Pause indicator button

turns on.

Following the program

You can follow the running of the program using the indicators on the control panel.

During washing and drying

the indicator Washing/

Polishing/ Drying is lit. The

dishwasher remains at rest for

40–50 minutes during drying.

When the program ends, the

indicator End lights up.

Do not open the door of the

dishwasher until the indicator End

lights up.

Changing program

If you want to change the program while the washing cycle is running, proceed as follows:

When the currently running program

stops, the indicator Start/Pause starts

ashing. Using the program selector

choose anew program.

Selecting anew program ends

the running of the original

program.

Start the new program by pressing

the Start/Pause button.

Press Start/Pause

After the program starts, the

indicator Start/Pause turns o and

the Washing indicator lights up.

English

15

Cancelling program

If you want to cancel the program currently running, proceed as follows:

Hold the button Start/Pause for

3 seconds.

The process of cancelling the

program starts and after 30

seconds the water drains from

the dishwasher.

When the indicator End lights

up, the program is cancelled.

Turning o the dishwasher

When the indicator End is lit, switch o

the dishwasher by turning the selector

to the O position.

Turn o the water supply and

disconnect the dishwasher from the

power supply.

NOTES

• After completion of the wash program you can slightly open the door of the dishwasher to speed up the

drying process.

• Open the door carefully, the steam coming from the open door is hot!

• When you open the door or there is apower failure while the washing program is running, the dishwasher

will continue in the program when you close the door or when power is restored.

• It is dangerous to open the door during operation, there is arisk of scalding by the hot water.

• If you open the door or the there is apower failure in the drying stage, the program ends. The dishwasher

is ready for aselection of anew program.

Removing the dishes from the dishwasher

• Before removing the dishes from the dishwasher, wait afew minutes before handling the dishes while they

are still hot and there is agreater risk of breakage. Also, the dishes dry better.

• Unload rst the bottom basket and then the upper one. Thus you will avoid water dripping from the upper

into the bottom basket.

English

16

DESCRIPTION OF WASHING PROGRAMS

Program designation Reference

Name of the program and temperature

Eco

50°C

Fast

50 min / 65°C

Intensive

65 °C

Type of soiling

coee, milk,

tea, cold meals,

vegetables, short-

time

quick soups,

sauces, pasta,

eggs, pilaf,

potatoes, baked

and fried foods

quick soups, sauces,

pasta, eggs, pilaf,

potatoes, baked

and fried foods

Degree of soiling medium medium strong

Amount of the detergent B: 25/15 cm

3

,

A: 5 cm

3

A+B A+B A+B

Length of program (min) 165

50

117

Power consumption (kWh) 1.00

1.35

1.61

Water consumption (l) 12.0

12.7

17.2

The following values are applicable for half load

Length of program (min) 145

46

96

Power consumption (kWh) 0.97

1.22

1.40

Water consumption (l) 12.0

12.7

12.2

Attention:

• Short programs do not include the drying stage.

• The above stated values were obtained under laboratory conditions in accordance with the relevant

standards. Real values can dier depending on the conditions of use and on the environmental conditions

(water pressure, voltage, water temperature at the input and ambient temperature).

Pre-wash

Washing 50 °C

Hot rinse

Drying

Exit

Washing 65 °C

Preliminary rinse

Hot rinse

Exit

Washing 45 °C

Washing 65 °C

Cold rinse

Hot rinse

Drying

Exit

English

17

MAINTENANCE AND CLEANING

Regular cleaning of the dishwasher prolongs the life of the appliance.

Cleaning the external surface

• Clean the control panel using slightly wet cloth. Dry thoroughly after cleaning.

• Never use sharp tools, abrasive powders or aggressive cleaners to clean the dishwasher.

Cleaning the door

• Use only acloth dampened with warm water to clean around the rim of the door. Do not use spray cleaners

to prevent water from penetrating the door lock or electrical components. Also do not use any abrasive

cleaners or abrasive powders that could scratch the surface of the appliance. Even some paper towels can

leave traces on the surface or scratches.

Cleaning the interior of the dishwasher

• Accumulation of grease and limescale can occur inside the dishwasher. In this case,

clean the dishwasher as follows: Fill the detergent dispenser, select awashing program

with high temperature and start the program without putting in any dishes. If this

procedure is ineective, use special detergents for cleaning dishwashers.

Filtration system

The lter protects the pump against penetration of larger pieces of food and other objects.

Remains of food may clog the lter. Therefore it is necessary to remove and clean the lter

from time to time.

The ltration system consists of ane microlter A, acoarse lter Band aat (main) lter. C.

1. If you want to remove and clean the ltering system, turn it counterclockwise and pull it

upward 1.

2. Pull out and remove the at lter 3.

3. The remove from the microlter the coarse lter 2 and rinse the microlter under

running water.

4. Return the at lter back in place.

5. Insert the coarse lter in the microlter and align them according to the markings.

6. Insert the microlter in the at lter and turn it in the direction of the arrow so that it is

secured in its place 4.

WARNING

• Regular lter cleaning ensures optimum performance and washing results. The lter

eectively captures particles from the wash water and allows the recycling of water

during the cycle.

• The dishwasher must never be used without alter! Improper insertion of the lter

may reduce the performance of the appliance and damage dishes and utensils.

• Do not tap on the lter when cleaning it. Deformed lter negatively aects the functionality of the

appliance.

Cleaning the spray arms

Regular cleaning of the spray arms of chemicals from hard water is important

because emerging limescale clogs jets and bearings. You can remove the

upper spray arm by unscrewing the nut at the top of the arm. Remove the

bottom arm by pulling it upward. Rinse the spray arms in warm water and

clean the jets with ane brush. After thorough rinsing put the arms back.

Water inlet hose lter

Inlet lter prevents damage to the dishwasher caused by dirt that could

get into the appliance from the water pipes. Check the lter and hose from

time to time and clean if necessary. To clean the lter, turn o the water and

English

18

remove the hose from the tap. Remove the lter and rinse it under running water. Put the clean lter in its place

and screw the hose back onto the tap.

How to keep your dishwasher in good condition

After each washing

After each wash, close the water supply to the

appliance and leave the door slightly open so that the

moisture and odors can vent from the interior.

Disconnect the power supply

Before any cleaning and maintenance disconnect the

power supply. Do not take arisk.

Do not use solvents or abrasive cleaners

Never use solvents or abrasive cleaners to clean the

exterior and rubber parts of the dishwasher. Use

only cloth dipped into warm, soapy water. Remove

stains and residue from the interior surfaces of the

dishwasher with a cloth soaked in a mild vinegar

solution or a special agent intended for dishwashers.

During vacations

If the appliance will not be in use for longer time,

perform awash cycle without dishes, disconnect the

power supply, close the water supply and leave the

door of the dishwasher ajar. This will prevent forming

odors inside the appliance and you will save the door

seal.

Moving the dishwasher

If the machine must be moved, try to transport it in an

upright position. If it is absolutely necessary, it can be

placed on its back.

Seal

Remains of food that gets stuck in the door seals are

one of the factors creating the odor in the dishwasher.

Prevent the formation of odor by regularly cleaning

the seal with adamp sponge.

TROUBLESHOOTING

Error codes

Individual error codes are displayed using the front panel indicators. The commendations in the following

table may help you solve the problem. If the problem persists, contact an authorized service center.

Error code

Error description Solution

Wash Exit Start/Pause

Insucient water supply. • Make sure that the water tap is completely open.

• Turn o the tap, disconnect the hose from the inlet and

clean the inlet hose lter.

• Restart the dishwasher and if the problem persists, contact

the service.

Error in the continuous supply

of water.

• Close the water supply.

• Contact the service.

Can not drain the waste water. • The drain hose is clogged.

• The dishwasher lters might be clogged.

• Turn the dishwasher on and o and cancel the washing

program.

• If problems persist, contact the service.

The required water temperature

cannot be reached. Faulty

heating element or temperature

sensor.

• Contact the service.

The overow alarm was

activated.

• Switch o the dishwasher and close the water supply.

• Contact the service.

Faulty electronic card. • Contact the service.

English

19

If one of the program indicators is on and the

button Start/Pause ashes:

• The dishwasher door is open. Close it.

If the program does not start

• Check if the power cord is plugged in the outlet

• Check the house fuses/circuit breakers.

• Make sure that the water supply is open.

• Make sure that the dishwasher door is closed.

• Make sure that you pressed the power button.

• Check if the dishwasher lters and the water inlet

lter are not clogged.

If the indicators “Washing/Drying” and “End” are

ashing

• The water overow alarm is active.

• Close the water supply and contact an authorized

service centre.

When the indicators do not turn o after the

washing process ends

• The power button is still on.

If there is detergent residue in the detergent

dispenser

• You poured the detergent into wet detergent

dispenser.

If water remains in the dishwasher when the

program ends

• The drain hose is clogged or kinked.

• The lters are clogged.

• The program did not end yet.

If the dishwasher stops in the middle of the

program

• Power outage

• Water supply malfunction.

• The program was switched to apause mode.

If you can hear during the washing process the

sounds of jolts and impacts

• Incorrectly distributed dishes.

• The spray arms hit the dishes.

If remnants of foods remained on the dishes

• The dishes in the dishwasher were badly arranged,

water from the spray arms did not get to all the

plates.

• The basket is overlled.

• The plates lean on each other.

• Too small amount of the detergent.

• Wrong washing program was selected.

• The spray arms are clogged with food residue.

• Clogged lters.

• Incorrectly installed lters.

• Clogged drain pump.

If there are white spots on the dishes

• You used too small amo9unt of the detergent.

• The rinse aid dispenser is set to an insucient

level.

• Despite the high degree of water hardness the

special salt in the softener was not used.

• The water softener is set to an insucient level.

• The lid of the salt dispenser is not properly closed.

If the dishes are not properly dried

• A program without drying was selected.

• The rinse aid dispenser is set to an insucient

level.

• You removed the dishes too early.

If there are rust stains on the dishes

• Low quality of the stainless steel dishes.

• High concentration of salt in the water.

• The lid of the salt dispenser is not properly closed.

• When lling the dispenser with salt contamination

of the inside of the dishwasher and dishes

occurred.

• Poor grounding of the dishwasher.

If the problems persist even after following the

recommended measures or other defects appear,

contact an authorized service center.

WARNING

• If there is awater leak, close the water inlet valve and contact an authorized service center. If there is on the

oor of the dishwasher water due to overow or leak, remove it before restarting the dishwasher.

English

20

TECHNICAL SPECIFICATIONS

Specications for the household dishwasher according to EU regulations no. 1059/2010:

Manufacturer ECG

Model EDF 6023 WA++

EAN 8592131505612

Number of dish sets 12

Energy eciency class

1

A++

Annual energy consumption

2

258 kWh

Energy consumption per standard wash cycle 0,9 kWh

Energy consumption in o mode 0,5 W

Energy consumption in standby mode 1,0 W

Annual water consumption

3

3360 l

Drying eciency class

4

A

Standard wash cycle

5

Eco

The length of program of the standard wash cycle 165 min

Noise level 54 dB(A)

Assembly Freestanding

Height 850 mm

Height (without top plate) 820 mm

Width 596 mm

Depth 598 mm

Weight 46 kg

Power input 2200 W

Rated voltage / frequency 220–240 Vac / 50 Hz

Power 10 A

Water pressure (hydrodynamic pressure) 0,3–10,0 bar = 0,03–1,0 MPa

Note:

1 A + + + (highest eectiveness) up to D(lowest eectiveness)

2 The annual consumption of energy 285 kWh is calculated on the basis of 280 standard wash cycles using cold water and

programs with lower energy consumption. Actual energy consumption will depend on how the appliance is used.

3 The annual consumption of water 3360 litres is calculated on the basis of 280 standard wash cycles. Actual water

consumption will depend on how the appliance is used.

4 A (highest eectiveness) up to G(lowest eectiveness)

5 Program Eco 50°C is areference program to which are related the data provided on the energy label. It is suitable for

washing normally soiled dishes and it is an ecient program in terms of energy and water consumption for this category

of dishes.

The appliance meets European standards and regulations in their current version:

– LVD – EU directive 2014/35/EU

– EMC – EU directive 2014/30/EU

– EUP 1016/2010

The above values were measured under specic conditions, in accordance with the relevant standards. Results may vary

signicantly depending on the amount and degree of soiling of the dishes, water hardness, amount of detergent, etc.

This instruction manual is written according to the standards and regulations of the European Union.

Leht laaditakse ...

ECG EDF 6023 WA Series Kasutusjuhend

ECG EDF 6023 WA Series Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid