AEG F78420VI1P Kasutusjuhend

EN User Manual 2

Dishwasher

FI Käyttöohje 22

Astianpesukone

FR Notice d'utilisation 42

Lave-vaisselle

F78420VI1P

CONTENTS

1. SAFETY INFORMATION...........................................................................................3

2. SAFETY INSTRUCTIONS.......................................................................................... 4

3. PRODUCT DESCRIPTION........................................................................................ 6

4. CONTROL PANEL.....................................................................................................7

5. PROGRAMMES......................................................................................................... 7

6. SETTINGS.................................................................................................................. 9

7. OPTIONS................................................................................................................. 11

8. BEFORE FIRST USE.................................................................................................12

9. DAILY USE................................................................................................................13

10. HINTS AND TIPS...................................................................................................15

11. CARE AND CLEANING........................................................................................ 16

12. TROUBLESHOOTING...........................................................................................18

13. TECHNICAL INFORMATION...............................................................................21

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

2

1. SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible if an incorrect

installation and use causes injuries and damages. Always

keep the instructions with the appliance for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all detergents away from children.

•

Keep children and pets away from the appliance door

when it is open.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2

General Safety

•

This appliance is intended to be used in household

and similar applications such as:

– farm houses; staff kitchen areas in shops, offices

and other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 8 (0.8) bar

(Mpa)

• Obey the maximum number of 9 place settings.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

ENGLISH

3

• Put knives and cutlery with sharp points in the cutlery

basket with the points down or in a horizontal

position.

• Do not keep the appliance door open without

supervision to prevent to fall on it.

• Before maintenance, deactivate the appliance and

disconnect the mains plug from the mains socket.

• Do not use water spray and steam to clean the

appliance.

• The ventilation openings in the base (if applicable)

must not be obstructed by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Obey the installation instruction

supplied with the appliance.

• Make sure that the appliance is

installed below and adjacent to safe

structures.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the

E.E.C. Directives.

• Only for UK and Ireland. The

appliance has a 13 amp mains plug. If

it is necessary to change the fuse in

the mains plug, use fuse: 13 amp

ASTA (BS 1362).

2.3 Water connection

• Make sure not to cause damage to

the water hoses.

• Before you connect the appliance to

new pipes or pipes not used for a

long time, let the water flow until it is

clean.

• The first time you use the appliance,

make sure that there is no leakage.

• The water inlet hose has a safety valve

and a sheath with an inner mains

cable.

www.aeg.com

4

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately disconnect the mains

plug from the mains socket. Contact

the Authorised Service Centre to

replace the water inlet hose.

2.4 Use

• Do not sit or stand on the open door.

• Dishwasher detergents are

dangerous. Obey the safety

instructions on the detergent

packaging.

• Do not drink and play with the water

in the appliance.

• Do not remove the dishes from the

appliance until the programme is

completed. There can be detergent

on the dishes.

• The appliance can release hot steam

if you open the door while a

programme operates.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

2.5 Service

• Contact the Authorised Service

Centre to repair the appliance. We

recommend only the use of original

spare parts.

• When you contact the Authorised

Service Centre, ensure that you have

the following information that is

available on the rating plate.

Model :

PNC :

Serial Number :

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

ENGLISH

5

3. PRODUCT DESCRIPTION

4

3

7

9

8

10

56

11

1

2

1

Upper spray arm

2

Lower spray arm

3

Filters

4

Rating plate

5

Salt container

6

Air vent

7

Rinse aid dispenser

8

Detergent dispenser

9

Cutlery basket

10

Lower basket

11

Upper basket

3.1 Beam-on-Floor

The Beam-on-Floor is a light that shows

on the kitchen floor below the appliance

door.

• When the programme starts, a red

light comes on and stays on for all the

duration of the programme.

• When the programme is completed, a

green light comes on.

• When the appliance has a

malfunction, the red light flashes.

The Beam-on-Floor goes off

when the appliance is

deactivated.

www.aeg.com6

4. CONTROL PANEL

1

2

3

4

5

6

7

8

9

1

On/off button

2

Display

3

Delay button

4

Program button

5

ExtraHygiene button

6

Multitab button

7

TimeSaver button

8

Reset button

9

Indicators

4.1 Indicators

Indicator Description

Salt indicator. It is always off while the programme operates.

Rinse aid indicator. It is always off while the programme operates.

5. PROGRAMMES

Programme Degree of soil

Type of load

Programme phases Options

P1

ECO

1)

• Normal soil

• Crockery and

cutlery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• ExtraHygiene

• TimeSaver

• Multitab

P2

AUTOSENSE

2)

• All

• Crockery, cut-

lery, pots and

pans

• Prewash

• Wash from 45 °C to 70

°C

• Rinses

• Dry

• ExtraHygiene

• Multitab

P3

PROZONE

3)

• Mixed soil

• Crockery, cut-

lery, pots and

pans

• Prewash

• Wash 50 °C and 65 °C

• Rinses

• Dry

• TimeSaver

• Multitab

P4

PRO

4)

• Heavy soil

• Crockery, cut-

lery, pots and

pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

• TimeSaver

• Multitab

ENGLISH 7

Programme Degree of soil

Type of load

Programme phases Options

P7

GLASS

• Normal or light

soil

• Delicate crock-

ery and glass-

ware

• Wash 45 °C

• Rinses

• Dry

• Multitab

P5

30MIN

5)

• Fresh soil

• Crockery and

cutlery

• Wash 60 °C

• Rinses

• ExtraHygiene

• Multitab

P8

PREWASH

6)

• All • Prewash

P6

EXTRA SILENT

7)

• Normal soil

• Crockery and

cutlery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• Multitab

1)

With this programme you have the most efficient use of water and energy consumption for crockery

and cutlery with normal soil. (This is the standard programme for test institutes).

2)

The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-

justs the temperature and the quantity of water, the energy consumption and the programme duration.

3)

With this programme you can wash a load with mixed soil. Very heavy soil in the lower basket and

normal soil in the upper basket. The pressure and the temperature of the water in the lower basket are

higher than in the upper basket.

4)

This programme has a high temperature rinsing phase for better hygiene results. During the rinsing

phase, the temperature stays at 70 °C for at least 10 minutes.

5)

With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

6)

With this programme you can quickly rinse dishes to prevent remains of food to bond on dishes and

odours to form in the appliance. Do not use detergent with this programme.

7)

This is the most silent programme. The pump works at a very low speed to decrease the level of noise.

Because of the low speed, the programme duration is long.

5.1 Consumption values

Programme

1)

Water

(l)

Energy

(kWh)

Duration

(min)

P1

ECO

9.9 0.7 218

P2

AUTOSENSE

6 - 11 0.5 - 1.2 40 - 140

P3

PROZONE

11 - 13 0.9 - 1.1 120 - 140

P4

PRO

11 - 13 1.3 - 1.4 140 - 160

www.aeg.com8

Programme

1)

Water

(l)

Energy

(kWh)

Duration

(min)

P7

GLASS

11 - 12 0.7 - 0.8 70 - 80

P5

30MIN

8 0.8 30

P8

PREWASH

4 0.1 14

P6

EXTRA SILENT

10 - 11 0.9 - 1.0 200 - 220

1)

The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

5.2 Information for test

institutes

For all the necessary information for test

performance, send an email to:

[email protected]

Write down the product number (PNC)

that is on the rating plate.

6. SETTINGS

6.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The level of the water softener

according to the water hardness.

• The activation or the deactivation of

the acoustic signal for end of

programme.

• The activation or deactivation of the

rinse aid dispenser when you want to

use the Multitab option without rinse

aid.

These settings will be saved until you

change them again.

How to set the programme

selection mode

The appliance is in programme selection

mode when the display shows the

programme number P1.

When you activate the appliance, usually

it is in programme selection mode.

However, if this does not happen, you

can set the programme selection mode

in the following way:

Press and hold Reset until the appliance

is in programme selection mode.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a detrimental effect on the washing

results and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

ENGLISH

9

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

el

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

If you use multi-tablets containing salt

and the hardness of your water is lower

than 21°dH, you can set the lowest water

softener level. It deactivates the salt refill

indicator.

If you use standard detergent or multi-

tablets without salt, set the proper

water hardness level to keep the salt

refill indicator active.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously

and until

the indicators , and start to

flash and the display is blank.

2. Press

.

• The indicators and go off.

• The indicator

continues to

flash.

• The display shows the current

setting: e.g.

= level 5.

3. Press

again and again to change

the setting.

4. Press the on/off button to confirm

the setting.

6.3 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

Use of rinse aid and multi-

tablets

When you activate the option Multitab,

the rinse aid dispenser continues to

release rinse aid. However you can

deactivate the rinse aid dispenser. In this

case the drying results may not be

satisfactory.

With the rinse aid dispenser deactivated,

the rinse aid indicator is always off.

How to deactivate the rinse

aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

www.aeg.com

10

the indicators , and start to

flash and the display is blank.

2. Press .

• The indicators and go off.

• The indicator continues to

flash.

• The display shows the current

setting.

– = rinse aid dispenser

activated.

– = rinse aid dispenser

deactivated.

3. Press to change the setting.

4. Press the on/off button to confirm

the setting.

6.4 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

The appliance must be in programme

selection mode.

1. To enter the user mode press and

hold simultaneously and until

the indicators

, and start to

flash and the display is blank.

2. Press

• The indicators and go off.

• The indicator

continues to

flash.

• The display shows the current

setting:

– = Acoustic signal off.

–

= Acoustic signal on.

3. Press to change the setting.

4. Press the on/off button to confirm

the setting.

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you have selected non

compatible options, the

appliance will automatically

deactivate one or more of

them. Only the indicators of

the options still active will

stay on.

7.1 Multitab

Activate this option when you use multi-

tablets that integrate the salt, rinse aid

and detergent functions. They can also

contain other cleaning or rinsing agents.

This option deactivates the release of

salt. The salt indicator does not come on.

With the use of this option the

programme duration is prolonged to

increase the cleaning and drying results

with the use of multi-tablets.

Multitab is not a permanent option and

must be selected at every cycle.

How to activate Multitab

Press .

The related indicator comes on.

The display shows the updated

programme duration.

7.2 TimeSaver

This option increases the pressure and

the temperature of the water. The

washing and the drying phases are

shorter.

The total programme duration decreases

by approximately 50%.

ENGLISH

11

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

How to activate TimeSaver

Press TimeSaver, the related indicator

comes on.

If the option is not applicable to the

programme, the related indicator does

not come on or it flashes quickly for a

few seconds and then goes off.

The display shows the updated

programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure will be repeated periodically.

8.1 The salt container

CAUTION!

Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (Only for the first time).

3. Fill the salt container with dishwasher

salt.

4. Remove the salt around the opening

of the salt container.

5. Turn the cap of the salt container

clockwise to close the salt container.

Water and salt can come out

from the salt container when

you fill it. Risk of corrosion.

To prevent it, after you fill

the salt container, start a

programme.

www.aeg.com12

8.2 How to fill the rinse aid

dispenser

A

B

D

C

M

A

X

1

2

3

4

+

-

A

B

D

C

CAUTION!

Only use rinse aid

specifically designed for

dishwashers.

1. Press the release button (D) to open

the lid (C).

2. Pour the rinse aid in the dispenser (A)

until the liquid reaches the fill level

'max'.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4. Close the lid. Make sure that the

release button locks into position.

You can turn the selector of

the released quantity (B)

between position 1 (lowest

quantity) and position 4 or 6

(highest quantity).

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent. If you use multi-

tablets, activate the option Multitab.

5. Set and start the correct programme

for the type of load and the degree

of soil.

9.1 Using the detergent

30

20

A BD

C

ENGLISH 13

20

30

B

A D

C

1. Press the release button (B) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (A).

3. If the programme has a prewash

phase, put a small quantity of

detergent in the compartment (D).

4. Close the lid. Make sure that the

release button locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3. Press repeatedly

until the display

shows the number of the programme

you want to start. The display will

show the programme number for

approximately 3 seconds and then

show the programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with

delay start

1. Set a programme.

2. Press again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

The delay indicator comes on.

3. Close the appliance door to start the

countdown.

While a countdown is running it is

possible to increase the delay time but

not to change the selection of the

programme and options.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

If you open the door while a programme

is running, the appliance stops. It may

affect the energy consumption and the

programme duration. When you close

the door, the appliance continues from

the point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme will end.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.

Press and hold Reset until the appliance

is in programme selection mode.

Cancelling the programme

Press and hold Reset until the appliance

is in programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed the

display shows 0:00 .

www.aeg.com

14

1. Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance.

2. Close the water tap.

10. HINTS AND TIPS

10.1 General

The following hints will ensure optimal

cleaning and drying results in daily use

and also help to protect the

environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, use the prewash

programme (if available) or select a

programme with a prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make

sure that the dishes can be

completely reached and washed by

the water released from the spray arm

nozzles. Make sure that items do not

touch or cover each other.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''3in1'',

''4in1'', ''All in 1''). Follow the

instructions written on the packaging.

• Select the programme according to

the type of load and degree of soil.

With the ECO programme you have

the most efficient use of water and

energy consumption for crockery and

cutlery with normal soil.

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• Multi-tablets are usually suitable in

areas with a water hardness up to 21

°dH. In areas exceeding this limit,

rinse aid and salt must be used in

addition to the multi-tablets.

However, in areas with hard and very

hard water we recommend to use

solo-detergent (powder, gel, tablets

without additional functions), rinse aid

and salt separately for optimal

cleaning and drying results.

• If you use multi-tablets you can select

the Multitab option (if available). This

option increases the cleaning and

drying results with the use of multi-

tablets.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use the

tablets with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid do the

following procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

6. Activate the rinse aid dispenser.

10.4 Loading the baskets

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items

made of wood, horn, aluminium,

pewter and copper.

• Do not put in the appliance items that

can absorb water (sponges,

household cloths).

ENGLISH

15

• Remove remaining food from the

items.

• Make soft the remaining burned food

on the items.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that cutlery and dishes do

not bond together. Mix spoons with

other cutlery.

• Make sure that glasses do not touch

other glasses.

• Put small items in the cutlery basket.

• Put light items in the upper basket.

Make sure that the items do not

move.

• Make sure that the spray arm can

move freely before you start a

programme.

10.5 Before starting a

programme

Make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid

(unless you use multi- tablets).

• The position of the items in the

baskets is correct.

• The programme is applicable for the

type of load and for the degree of

soil.

• The correct quantity of detergent is

used.

10.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance.

Hot items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

At the end of the program

water can still remain on the

sides and on the door of the

appliance.

11. CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms decrease the

washing results. Make a

check regularly and, if

necessary, clean them.

11.1 Cleaning the filters

The filter system is made of 3 parts.

C

B

A

1. Turn the filter (B) counterclockwise

and remove it.

www.aeg.com

16

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

5. Make sure that there are no residues

of food or soil in or around the edge

of the sump.

6. Put back in place the flat filter (A).

Make sure that it is correctly

positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8.

Put back the filter (B) in the flat filter

(A). Turn it clockwise until it locks.

CAUTION!

An incorrect position of the

filters can cause bad

washing results and damage

to the appliance.

11.2 Cleaning the spray arms

Do not remove the spray arms. If the

holes in the spray arms are clogged,

remove remaining parts of soil with a thin

pointed object.

11.3 External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.4 Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• If you regularly use short duration

programmes, these can leave

deposits of grease and limescale

inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per

month.

• To maintain the performance of your

appliance at its best, we recommend

to use monthly a specific cleaning

product for dishwashers. Follow

carefully the instructions on the

packaging of the product.

ENGLISH

17

12. TROUBLESHOOTING

If the appliance does not start or it stops

during operation. Before you contact an

Authorised Service Centre, check if you

can solve the problem by yourself with

the help of the information in the table.

WARNING!

Repairs not properly done

may result in serious risk to

the safety of the user. Any

repairs must be performed

by qualified personnel.

With some problems, the display

shows an alarm code.

The majority of problems that can

occur can be solved without the need

to contact an Authorised Service

Centre.

Problem and alarm code Possible cause and solution

You cannot activate the ap-

pliance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

The program does not start. • Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or wait for the

end of the countdown.

• The appliance has started the procedure to recharge

the resin inside the water softener. The duration of the

procedure is approximately 5 minutes.

The appliance does not fill

with water.

The display shows .

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clogged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not

drain the water.

The display shows .

• Make sure that the sink spigot is not clogged.

• Make sure that the filter in the outlet hose is not clog-

ged.

• Make sure that the interior filter system is not clogged.

• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.

The display shows .

• Close the water tap and contact an Authorised Service

Centre.

The appliance stops and

starts more times during op-

eration.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

www.aeg.com18

Problem and alarm code Possible cause and solution

The program lasts too long. • Select the TimeSaver option to shorten the program

time.

• If the delayed start option is set, cancel the delay setting

or wait for the end of the countdown.

The remaining time in the

display increases and skips

nearly to the end of program

time.

• This is not a defect. The appliance is working correctly.

Small leak from the appli-

ance door.

• The appliance is not level. Loosen or tighten the adjust-

able feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

The appliance door is diffi-

cult to close.

• The appliance is not level. Loosen or tighten the adjust-

able feet (if applicable).

• Parts of the tableware are protruding from the baskets.

Rattling/knocking sounds

from inside the appliance.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

The appliance trips the cir-

cuit-beaker.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

Refer to "Before first use",

"Daily use", or "Hints and

tips" for other possible

causes.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

12.1 The washing and drying results are not satisfactory

Problem Possible cause and solution

Poor washing results. • Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• If you use multi-tablets, always switch on the option

Multitab.

ENGLISH 19

Problem Possible cause and solution

Poor drying results. • Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.

• We recommend to always use rinse aid, even in com-

bination with multi-tablets.

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too much.

There are stains and dry water

drops on glasses and dishes.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

The dishes are wet. • The programme does not have a drying phase or has

a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser and

use rinse aid and multi-tablets together.

• Keep the dishwasher door ajar for some time before

removing tableware.

The interior of the appliance is

wet.

• This is not a defect of the appliance. it is caused by

the humidity in the air that condenses on the walls.

Unusual foam during washing. • Use the detergent for dishwashers only.

• There is a leak in the rinse aid dispenser. Contact an

Authorised Service Centre.

Traces of rust on cutlery. • There is too much salt in the water used for washing.

Refer to "The water softener".

• Silver and stainless steel cutlery were placed together.

Avoid to put silver and stainless steel items close to-

gether.

There are residues of deter-

gent in the dispenser at the

end of the programme.

• The detergent tablet got stuck in the dispenser and

therefore was not completely washed away by water.

• Water cannot wash away the detergent from the dis-

penser. Make sure that the spray arm is not blocked or

clogged.

• Make sure that items in the baskets do not impede the

lid of the detergent dispenser from opening.

Odours inside the appliance. • Refer to "Internal cleaning".

Limescale deposits on the ta-

bleware, on the tub and on

the inside of the door.

• Refer to "The water softener".

www.aeg.com20

Leht laadib ...

AEG F78420VI1P Kasutusjuhend

AEG F78420VI1P Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid