Aeg-Electrolux F45010W0 Kasutusjuhend

FAVORIT45010

EN

DISHWASHER USER MANUAL

2

FI

ASTIANPESUKONE KÄYTTÖOHJE

28

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have

created it to give you impeccable performance for many

years, with innovative technologies that help make life

simpler – features you might not find on ordinary

appliances. Please spend a few minutes reading to get the

very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to

keep all your AEG appliances looking spotless and

working perfectly. Along with a wide range of accessories

designed and built to the high quality standards you

would expect, from specialist cookware to cutlery baskets,

from bottle holders to delicate laundry bags…

Visit the webshop at:

www.aeg.com/shop

2

CONTENTS

4 Safety information

7 Product description

8 Control panel

10 Use of the appliance

10 Setting the water softener

12 Use of dishwasher salt

12 Use of detergent and rinse aid

13 Multitab function

14 Loading cutlery and dishes

17 Washing programmes

18 Select and start a washing

programme

20 Care and cleaning

21 What to do if…

24 Technical data

24 Environment concerns

25 Installation

The following symbols are used in this user

manual:

Important information concerning your

personal safety and information on how to

avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice

Contents

3

SAFETY INFORMATION

Before the installation and use, read this manual carefully:

• For your safety and the safety of your property.

• To help the environment.

• For the correct operation of the appliance.

Always keep these instructions with the appliance also if you move or give it to a different

person.

The manufacturer is not responsible if an incorrect installation and use causes damage.

Children and vulnerable persons safety

• Do not let persons, children included, with reduced physical sensory, reduced mental

functions or lack of experience and knowledge to use the appliance. They must have su-

pervision or instruction for the operation of the appliance by a person who is responsible

for their safety.

• Children must get supervision to make sure that they do not play with the appliance.

• Keep all packaging away from children. There is the risk of suffocation or injury.

• Keep all detergents in a safe area. Do not let the children touch the detergents.

• Keep children and pets away from the appliance when the door is open.

General safety

• Do not change the specifications of this appliance. There is the risk of injury and damage

to the appliance.

• Obey the safety instructions from the detergent manufacturer to prevent burns to eyes,

mouth and throat.

• Do not drink the water from the appliance. Particles of detergent can stay in your appli-

ance.

• Do not keep the appliance door open without supervision. This to prevent injury and to

fall on an open door.

• Do not sit or stand on the open door.

Use

• The appliance is only for domestic use. Do not use the appliance for other uses to pre-

vent injury to persons and damage to property.

• Only use the appliance to clean accessories that are applicable for dishwashers.

• Do not put flammable products or items that are wet with flammable products in, near

or on the appliance. Risk of explosion or fire.

• Put the knives and all items with sharp points in the cutlery basket with their points

down. If not, put in a horizontal position in the upper basket or in the knife basket. (Not

all models have the knife basket).

• Use only specified products for dishwashers (detergent, salt, rinse aid).

• Types of salt that are not specified for dishwashers can cause damage to the water soft-

ener.

4 Safety information

• Fill the appliance with salt before you start a washing programme. Remaining salt in the

appliance can cause corrosion or make a hole in the bottom of the appliance.

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher

cleaning agent, liquid detergent). This can cause damage to the appliance.

• Make sure that the spray arms can move freely before you start a washing programme.

• The appliance can release hot steam if you open the door while a washing programme

operates. There is a risk of skin burns.

• Do not remove the dishes from the appliance until the washing programme is comple-

ted.

Care and cleaning

• Before you clean the appliance, deactivate it and disconnect the mains plug from the

mains socket.

• Do not use flammable products or products that can cause corrosion.

• Do not use the appliance without the filters. Make sure that the installation of the filters

is correct. An incorrect installation causes unsatisfactory washing results and damage to

the appliance.

• Do not use spray water or steam to clean the appliance. Risk of electrical shock and

damage to the appliance.

Installation

• Make sure that the appliance is not damaged. Do not install or connect a damaged appli-

ance, contact the supplier.

• Remove all packaging before you install and use the appliance.

• Only a qualified person must do the electrical connection, the plumbing and the installa-

tion of the appliance. This to prevent the risks of structural damage or injury.

• Make sure that the mains plug is disconnected from the mains socket during installation.

• Do not drill into the sides of the appliance to prevent damage to hydraulic components

and electrical components.

• Make sure that the appliance is installed below and adjacent to safe structures.

Frost precautions

• Do not install the appliance where the temperature is less than 0 °C.

• The manufacturer is not responsible for frost damage.

Water connection

• Use new hoses to connect the appliance to the water supply. Do not use used hoses.

• Do not connect the appliance to new pipes or pipes not used for a long time. Let the

water flow for some minutes, then connect the inlet hose.

• Make sure not to squash or cause damage to the water hoses when you install the appli-

ance.

• Make sure that the water couplings are tight to prevent a water leakage.

• The first time you use the appliance, make sure that the hoses do not have water leaks.

Safety information

5

• The water inlet hose has a safety valve and a double sheath with an inner mains cable.

There is pressure in the water inlet hose only when the water flows. If there is a leak in

the water inlet hose, the safety valve interrupts the flow of water.

– Be careful when you connect the water inlet hose:

– Do not put the water inlet hose or the safety valve in water.

– If the water inlet hose or the safety valve are damaged, immediately disconnect the

mains plug from the mains socket.

– Contact the service centre to replace the water inlet hose with safety valve.

WARNING!

Dangerous voltage.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information on the rating plate agrees with the power sup-

ply.

• Always use a correctly installed shockproof socket.

• Do not use multiple plugs and extension cables. There is a risk of fire.

• Do not replace or change the mains cable. Contact the service centre.

• Make sure not to squash or cause damage to the mains plug and cable behind the appli-

ance.

• Make sure that there is access to the mains plug after the installation.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Service centre

• Only a qualified person can repair or work on the appliance. Contact the service centre.

• Use only original spare parts.

To discard the appliance

• To prevent the risk of injury or damage:

– Disconnect the mains plug from the mains socket.

– Cut off the mains cable and discard it.

6 Safety information

– Remove the door catch. This prevents children or pets to be closed in the appliance.

There is a risk of suffocation.

– Discard the appliance at the local waste disposal centre.

WARNING!

The dishwasher detergents are dangerous and can cause corrosion !

• If an accident occurs with these detergents, contact immediately a physician.

• If the detergent gets into the mouth, contact immediately a physician.

• If the detergent gets into the eyes, contact immediately a physician and clean the eyes

with water.

• Keep dishwasher detergents in a safe area and out of children touch.

• Do not keep the appliance door open when there is detergent in the detergent dispenser.

• Fill the detergent dispenser only before you start a washing programme.

PRODUCT DESCRIPTION

1 Upper basket

2 Water hardness dial

3 Salt container

4 Detergent dispenser

5 Rinse aid dispenser

6 Rating plate

7 Filters

8 Lower spray arm

9 Upper spray arm

Product description

7

CONTROL PANEL

1 2 3 4

7 568

1 Off position

2 Programme marker

3 Indicators

4 Display

5 Start button

6 Delay button

7 Multitab button

8 Programme knob

Indicators

The indicator comes on when the washing and rinsing phases operate.

The indicator comes on when the dry phase operates.

The indicator comes on when it is necessary to fill the rinse aid dispenser.

1)

The indicator comes on when it is necessary to fill the salt container.

1)

After you fill the container, the salt indicator can stay on for some hours. This does

not have an unwanted effect on the operation of the appliance.

The indicator comes on when you activate the multitab function.

1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a

washing programme operates.

Display

The display shows:

• The electronic adjustment of the level of the water softener

• The activation and deactivation of the rinse aid dispenser (only with the multitab func-

tion on)

• The time of the washing programme

• The remaining time to the end of the washing programme

• The end of a washing programme (the display shows a zero)

• The time of the delay start

• The alarm codes.

8 Control panel

Start button

Press this button to start:

• The washing programme

• The countdown of the delay start.

Delay button

Press this button again and again to delay the start of the washing programme from 1 to

19 hours.

Multitab button

Press this button to activate or deactivate the multitab function (refer to 'Multitab func-

tion').

Programme knob

With the programme knob you can:

• Activate and deactivate the appliance

• Set a washing programme

• Adjust electronically the level of the water softener (refer to 'Setting the water softener')

• Activate or deactivate the rinse aid dispenser (only with the multitab function on).

To activate the appliance and set a washing programme

Turn the programme knob until the programme marker is aligned with one of the washing

programmes on the control panel.

• If the programme marker is aligned with a washing programme, the digital display shows

the programme time.

• If the programme marker is not aligned with a washing programme, the display shows

two horizontal status bar.

To deactivate the appliance

Turn the programme knob until the programme marker is aligned with the off position.

Setting mode

The appliance must be in setting mode for these operations:

• To set and start a washing programme

• To set and start a delay start

• To adjust electronically the level of the water softener

• To deactivate or activate the rinse aid dispenser (only with the multitab function on).

Activate the appliance. The appliance is in setting mode when:

• The programme time flashes in the display

• One or more phase indicator lights come on.

Activate the appliance. The appliance is not in setting mode when:

• The washing programme time or the delay start time do not flash in the display

• One or more phase indicator lights come on.

Control panel

9

– It is necessary to cancel the programme or the delay start to go back to the setting

mode (refer to 'Select and start a washing programme').

USE OF THE APPLIANCE

1. Be sure that the set level of the water softener agrees with the water hardness in your

area. If not, adjust the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appliance.

5. Set the correct washing programme for the type of load and soil.

6. Fill the detergent dispenser with the correct quantity of detergent.

7. Start the washing programme.

If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function

(refer to 'Multitab function').

SETTING THE WATER SOFTENER

The water softener removes minerals and salts from the water supply. These minerals and

salts can cause damage to the appliance.

Adjust the level of the water softener if this does not agree with the water hardness in your

area.

Contact your local water authority to know the water hardness in your area.

Water hardness

Water hardness ad-

justment

German degrees

(°dH)

French degrees

(TH°)

mmol/l Clarke de-

grees

manually elec-

tronical-

ly

51 - 70 91 - 125 9,1 - 12,5 64 - 88

2

1)

10

43 - 50 76 - 90 7,6 - 9,0 53 - 63

2

1)

9

37 - 42 65 - 75 6,5 - 7,5 46 - 52

2

1)

8

29 - 36 51 - 64 5,1 - 6,4 36 - 45

2

1)

7

23 - 28 40 - 50 4,0 - 5,0 28 - 35

2

1)

6

19 - 22 33 - 39 3,3 - 3,9 23 - 27

2

1)

5

1)

15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

10 Use of the appliance

Water hardness

Water hardness ad-

justment

German degrees

(°dH)

French degrees

(TH°)

mmol/l Clarke de-

grees

manually elec-

tronical-

ly

< 4 < 7 < 0,7 < 5

1

2)

1

2)

1) Factory position.

2) Do not use salt at this level.

You must adjust the water softener manually and electronically.

Manual adjustment

Turn the water hardness dial to the position 1 or 2

(refer to the table).

Electronic adjustment

Make sure that the appliance is deactivated.

1. Press and hold the Multitab button .

2. Turn the programme knob counterclockwise until the programme marker is aligned

with the first washing programme on the control panel.

3. Release the Multitab button when the display shows the set level of the water softener

(example: the display shows

= level 5.

4. Press the Multitab button again and again until the display shows the new level.

5. Deactivate the appliance to confirm the adjustment.

If the water softener is set electronically to the level 1, the salt indicator light stays off.

Setting the water softener 11

USE OF DISHWASHER SALT

How to fill the salt container

1. Turn the cap counterclockwise and open

the salt container.

2. Fill the salt container with 1 litre of water

(only for the first time you fill with salt).

3. Use the funnel to fill the salt container

with salt.

4. Remove the salt around the opening of

the salt container.

5. Turn the cap clockwise to close the salt

container.

It is correct that water comes out from the

salt container when you fill it with salt.

USE OF DETERGENT AND RINSE AID

8

2

4

5

6

1

7

3

Use of detergent

To help the environment, do not use more than the correct quantity of detergent.

Follow the detergent manufacturer recommendations on the detergent packaging.

Do these steps to fill the detergent dispenser:

1.

Press the release button

2

to open the lid

8

of the detergent dispenser.

2.

Put the detergent in the dispenser

3

.

3. If the washing programme has a prewash phase, put a small quantity of detergent in

the prewash detergent compartment

1

.

4.

If you use the detergent tablets, put the tablet in the detergent dispenser

3

.

12 Use of dishwasher salt

5. Close the detergent dispenser. Press the lid until it locks into position.

Different brands of detergent dissolve in different times. Some detergent tablets do not

have the best cleaning results during short washing programmes. Use long washing pro-

grammes when you use the detergent tablets to fully remove the detergent.

Use of rinse aid

Rinse aid makes it possible to dry the dishes without streaks and stains.

The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.

Do these steps to fill the rinse aid dispenser:

1.

Press the release button

5

to open the lid

7

of the rinse aid dispenser.

2.

Fill the rinse aid dispenser

4

with rinse aid. The mark 'max' shows the maximum level.

3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during

the washing programme.

4. Close the rinse aid dispenser. Press the lid until it locks into position.

Adjust the rinse aid dosage

Factory set: position 4.

You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest

dosage).

Turn the rinse aid selector

6

to increase or decrease the dosage.

MULTITAB FUNCTION

The multitab function is for combi detergent tablets.

These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tab-

lets can contain other agents.

Be sure that these tablets are applicable for the water hardness in your area (refer to the

instructions on the packaging of the products).

The multitab function deactivates the flow of rinse aid and salt.

The multitab function deactivates the indicators of salt and rinse aid.

The programme duration can increase if you use the multitab function.

Activate the multitab function before the start of a washing programme. You cannot acti-

vate the function when a washing programme operates.

To activate the multitab function

• Press the Multitab button, the multitab indicator comes on. The function is activated.

– When you set the multitab function, it stays on until you deactivate it.

To deactivate the multitab function and use separately detergent, salt and rinse aid

1. Press the Multitab button, the multitab indicator goes off. The function is deactivated.

2. Fill the salt container and the rinse aid dispenser.

3. Adjust the water hardness to the highest level.

4. Start a washing programme without dishes.

Multitab function

13

5. Adjust the water softener to the water hardness in your area.

6. Adjust the quantity of rinse aid.

LOADING CUTLERY AND DISHES

Hints and tips

• Do not put in the appliance items that can absorb water (sponges, household cloths).

• Remove the remaining food from the items.

• Make soft the remaining burned food on the items.

• Put hollow items (cups, glasses and pans) with the opening down.

• Make sure that water does not collect in containers or in bowls.

• Make sure that cutlery and dishes do not bond together.

• Make sure that the glasses do not touch other glasses.

• Put small items in the cutlery basket.

• Mix the spoons with other cutlery to prevent them to bond together.

• When you put the items in the baskets, make sure that the water can touch all surfaces.

• Put light items in the upper basket. Make sure that the items do not move.

• Water droplets can collect on plastic items and non-stick pans.

Lower basket

Put the saucepans, lids, plates, salad bowls and

cutlery in the lower basket. Put the service dishes

and large lids around the edge of the basket.

14 Loading cutlery and dishes

The rows of prongs in the lower basket can be flat

to load pots, pans and bowls.

The cutlery basket

Put the forks and spoons with the handles down.

Put the knives with the handles up.

Mix the spoons with other cutlery to prevent them

to bond together.

Use the cutlery grid. If the dimensions of the cut-

lery prevent use of the cutlery grid, you can easily

remove it.

Loading cutlery and dishes 15

Upper basket

The upper basket is for plates (maximum 24 cm in

diameter), saucers, salad bowls, cups, glasses, pots

and lids. Arrange the items to let water touch all

surfaces.

Prevent to put plates in the first three sectors in

the front part of the basket. Make sure the plates

tilt forward.

Put the glasses with long stems in the cup racks

with the stems up. For longer items, fold the cup

racks up.

Adjustment of the height of the upper basket

You can put the upper basket in two positions to increase the load flexibility.

Maximum height of the dishes in:

the upper basket the lower basket

Higher position 20 cm 31 cm

Lower position 24 cm 27 cm

Do these steps to move the upper basket to the higher position:

16 Loading cutlery and dishes

1. Pull the basket out until it stops.

2. Carefully lift the two sides until the

mechanism is engaged and the basket is

stable.

Do these steps to move the upper basket to

the lower position:

1. Pull the basket out until it stops.

2. Carefully lift up the two sides.

3. Hold the mechanism and let it fall back

down slowly.

CAUTION!

• Do not lift or lower the basket on one side

only.

• If the basket is in the upper position, do not put cups on the cup racks.

WASHING PROGRAMMES

Programme Type of soil Type of load Programme description

Heavy soil Crockery, cutlery, pots

and pans

Prewash

Wash 70 °C

Rinses

Dry

1)

All Crockery, cutlery, pots

and pans

Prewash

Wash 45 °C or 70 °C

Rinses

Dry

2)

Fresh soil Crockery and cutlery Wash 60°C

Rinse

Use this programme to quickly rinse the

dishes. This prevents the remaining food

to bond on the dishes and bad odours to

come out from the appliance.

Do not use detergent with this pro-

gramme

Rinse

3)

Normal soil Crockery and cutlery Prewash

Wash 50 °C

Rinses

Dry

1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the

temperature and quantity of the water, the energy consumption and the programme time.

2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

3) This is the standard programme for test institutes. With this programme you have the most efficient use of

water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test

information.

Washing programmes 17

Consumption values

Programme

1)

Energy (kWh) Water (litre)

1,5-1,7 15-17

1,1-1,7 11-22

0,9 9

0,1 4

1,0-1,1 13-15

1) The display shows the programme time.

The water pressure and temperature, the variations of the mains supply and the quantity of

dishes can change the consumption values.

SELECT AND START A WASHING PROGRAMME

Start the washing programme without delay start

1. Close the appliance door.

2. Set the washing programme (make sure that the appliance is in setting mode).

• The programme time flashes in the display

• The phase indicators of the set washing programme come on.

3. Press the Start button, the washing programme starts automatically.

• The phase indicators go off but the indicator of the phase in operation stays on.

Start the washing programme with delay start

1. Close the appliance door.

2. Set the washing programme (make sure that the appliance is in setting mode).

3. Press the Delay button again and again until the display shows the time of the delay

start.

• The time of the delay start flashes in the display.

4. Press the Start button, the countdown starts automatically.

• The delay start time flashes no more in the display

• The phase indicators of the set washing programme go off.

5. When the countdown is completed, the washing programme starts automatically.

• The indicator of the phase in operation comes on.

The opening of the appliance door stops the countdown. When you close the door, the

countdown continues from the point of interruption.

Interruption of a washing programme

• Open the appliance door.

18 Select and start a washing programme

– The washing programme stops.

• Close the appliance door.

– The washing programme continues from the point of interruption.

Cancel the delay start

If you did not press the Start button, and the countdown is not in operation

1. Press the Delay button again and again until:

• The display shows the time of the set washing programme

• The phase indicators come on.

2. Press the Start button to start the washing programme.

If you did press the Start button, and the countdown is in operation

1. Press the Delay button again and again until:

• The display shows the time of the set washing programme

• The phase indicators come on.

The washing programme starts automatically.

Cancel the washing programme

If the washing programme has not started, you can change the selection.

To change the selection when the washing programme operates, it is necessary to cancel

the programme.

• At the same time press and hold the buttons Multitab and Delay until:

– The time of the last set washing programme flashes in the display

– The indicators of the phases of the washing programme come on.

Make sure that there is detergent in the detergent dispenser before you start a new wash-

ing programme.

End of the washing programme

The display shows a zero and the phase indicators are off when the washing programme is

completed.

1. Deactivate the appliance.

2. Open the appliance door.

3. For better drying results, keep the door ajar for some minutes.

If you do not deactivate the appliance at the end of the washing programme, the appliance

stays on standby.

• To decrease energy consumption during the standby, after three minutes from the end of

the washing programme:

– All indicators go off

– The display shows one horizontal bar.

Press one of the buttons, the display and the indicators come on again.

Select and start a washing programme

19

Remove the items from the baskets

• Let the dishes become cold before you remove them from the appliance. Hot dishes can

be easily damaged.

• First remove the items from the lower basket, then from the upper basket.

• There can be water on the sides and on the door of the appliance. Stainless steel be-

comes cool more quickly than the dishes.

CARE AND CLEANING

To remove and clean the filters

Dirty filters decrease the washing results. Make a check at intervals and if necessary, clean

them.

The appliance has three filters:

• Coarse filter (A)

• Microfilter (B)

• Flat filter (C).

1. To unlock the filters (A) and (B), turn the

handle on the microfilter (B) approxi-

mately 1/4 counterclockwise and remove.

2. Hold the coarse filter (A) by the handle

and remove it from the microfilter (B).

A

B

C

A

B

C

20 Care and cleaning

Leht laadib ...

Aeg-Electrolux F45010W0 Kasutusjuhend

See käsiraamat sobib ka

Aeg-Electrolux F45010W0 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid