JVC GZ-RX515 Kasutusjuhend

CAMCORDER

C5B7_RX515_EU_EN

Detailed User Guide

GZ-RX515

GZ-RX510

Table of Contents

Getting Started

Verifying the Accessories ........................................................ 4

Turning on this Unit ..................................................................

5

Opening the Terminal Cover (SD Card Cover) ........................ 5

Charging .................................................................................. 6

Resetting this Unit .................................................................... 6

Quad Proof .............................................................................. 7

Before Using Underwater or under Low Temperature .......... 7

Grip Adjustment ....................................................................... 9

Attaching the Core Filter .......................................................... 9

Inserting an SD Card ............................................................. 10

Types of Usable SD Card ................................................... 10

Using the Touch Screen ........................................................ 12

Locking the Screen (when Shooting Underwater) .............. 12

Adjusting the Touch Panel ................................................. 13

Names of Buttons and Functions on the LCD Monitor ....... 14

Clock Setting ......................................................................... 17

Resetting the Clock ............................................................ 17

Changing the Display Language ............................................ 18

Holding this Unit .................................................................... 19

Tripod Mounting .................................................................... 19

Using this Unit Overseas ....................................................... 20

Charging the Battery Pack Overseas ................................. 20

Setting the Clock to Local Time when Traveling ................. 20

Setting Daylight Saving Time ............................................. 21

Optional Accessories ............................................................. 21

Recording

Taking Videos in Auto Mode .................................................. 22

Capturing Still Images During Video Recording

................. 25

Taking Still Images in Auto Mode ........................................... 26

Zooming ................................................................................ 28

Manual Recording ................................................................. 29

Adjusting Focus Manually (FOCUS) .................................. 30

Adjusting Brightness .......................................................... 31

Setting Backlight Compensation ........................................ 32

Setting White Balance ........................................................ 33

Taking Close-up Shots (TELE MACRO) ............................ 34

Shooting under Water ............................................................ 35

Recording with Effects ........................................................... 36

Recording Images Like an Old Black and White Photo

(GRAINY MONOCHROME) ........................................... 37

Recording Food Images (FOOD) ....................................... 38

Recording Images of a Baby (BABY) ................................. 39

Recording with Animation Effects (ANIMATION EFFECT) .... 40

Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) ....... 42

Reducing Camera Shake ....................................................... 43

Recording at Intervals (TIME-LAPSE RECORDING) ............. 44

Recording with a Part of the Screen Enlarged in Sub Screen

(CLOSE-UP SUB-WINDOW) ............................................. 46

Taking Group Shots (Self-timer) ............................................ 47

Recording Videos with Date and Time ................................... 48

Checking the Remaining Recording Time ............................. 49

Playback

Playing Back Videos .............................................................. 51

Normal Playback

................................................................ 52

Checking the Recording Date and Other Information ......... 54

MARKING PLAYBACK ...................................................... 55

DIGEST PLAYBACK .......................................................... 59

PLAYBACK OTHER FILE .................................................. 60

Playing Back Still Images ....................................................... 61

Slideshow Playback ........................................................... 62

Connecting to and Viewing on TV .......................................... 63

Connecting via the HDMI Mini Connector .......................... 63

Connecting via the AV Connector ...................................... 65

Editing

Deleting Unwanted Files ........................................................ 66

Deleting the Currently Displayed File

................................. 66

Deleting Selected Files ...................................................... 66

Protecting Files ...................................................................... 67

Protecting/Releasing Protection of the Currently Displayed

File .................................................................................. 67

Protecting/Releasing Protection of Selected Files .............. 68

Capturing a Still Image in the Video During Playback ............ 69

Combining Videos Recorded by Seamless Recording .......... 70

Capturing a Required Part in the Video (TRIMMING) ............ 71

Copying

Dubbing Files to a Disc by Connecting to a Blu-ray Recorder 72

Copying Files to an SD Card

.................................................. 73

Copying to Windows PC ........................................................ 74

Verifying System Requirements (Guideline) ....................... 74

Installing the Provided Software (Built-in) ........................... 77

Backing Up All Files ........................................................... 79

Organizing Files ................................................................. 80

Recording Videos to Discs ................................................. 81

Backing Up Files Without Using Provided Software ........... 83

List of Files and Folders ..................................................... 84

Copying to Mac Computer ..................................................... 85

Using Wi-Fi

Wi-Fi Capabilities ................................................................... 86

Operating Environment

.......................................................... 87

Precautions on Using Wi-Fi ................................................... 87

Image Monitoring via Direct Connection (DIRECT

MONITORING) .................................................................. 88

Image Monitoring via an Access Point at Home (INDOOR

MONITORING) .................................................................. 91

Recording the Location Information ....................................... 94

Changing the Settings ........................................................... 98

Registering Access Point Using Wi-Fi Protected Setup (WPS)

........................................................................................ 99

Registering Access Point Using WPS PIN ....................... 100

Checking the MAC Address of this Camera ..................... 101

Initializing the Wi-Fi Settings ............................................ 101

Using Smartphone Applications ........................................... 102

Indications on the screen ................................................. 102

Using the Markings .......................................................... 103

Using the Game Score ..................................................... 104

Transferring Videos (AVCHD format) ............................... 106

Transferring Still Images .................................................. 109

Smartphone Application Settings ..................................... 111

Troubleshooting ................................................................... 113

Wi-Fi Specifications ............................................................. 117

Using Wi-Fi by Creating a QR Code

DIRECT MONITORING ....................................................... 119

INDOOR MONITORING ...................................................... 122

OUTDOOR MONITORING .................................................. 125

Registering Access Point Manually ...................................... 129

Settings Menu

Operating the Menu ............................................................. 130

Operating the Top Menu

.................................................. 130

RECORD SETTING Menu (video) ....................................... 131

RECORD SETTING Menu (still image) ................................ 136

PLAYBACK SETTING Menu (video) ................................... 138

EDIT Menu (video) ............................................................... 139

PLAYBACK SETTING Menu (still image) ............................ 140

EDIT Menu (still image) ....................................................... 141

SETUP (video/still image) .................................................... 142

CONNECTION SETTINGS (video/still image) ..................... 145

USB CONNECTION MENU ................................................. 146

2

Names of Parts ........................................................... 147

Indications on the LCD monitor ............................... 150

Troubleshooting ......................................................... 153

When the unit is not working properly .................................. 153

Charging

.............................................................................. 153

Power supply ....................................................................... 154

Recording ............................................................................ 154

SD Card ............................................................................... 155

Playback .............................................................................. 155

Editing/Copying ................................................................... 156

Computer ............................................................................. 156

Screen/Image ...................................................................... 157

Other Problems ................................................................... 157

Error Message? ................................................................... 158

Maintenance ............................................................... 160

Specifications ............................................................. 161

Trademarks ................................................................. 163

3

Verifying the Accessories

If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.

Illustration Description

.

AC Adapter

AC-V10E

0

Charges this unit. Attach the charging adapter cable to the tip of the cord.

It can also be used when recording or playing back videos indoors.

.

Charging Adapter Cable

QAM1580-001

0

Attach to the tip of the cord of the AC adapter and connect to the USB connector of this unit to charge.

.

USB Cable

(Type A - Micro Type B)

0

Connects this unit to a computer.

.

AV Cable

E3A-0085-00

0

Connects this unit to a TV to play back recorded images on the TV.

0

Please consult your JVC dealer or the nearest JVC service center when purchasing a new AV cable.

.

Small Core Filter (for AC Adapter)

.

Large Core Filter (AV Cable)

.

Basic User Guide

0

Read well and keep in a safe place where it can be accessed easily when necessary.

Memo :

0

The provided software (application software) is built into this unit.

“Verifying System Requirements (Guideline)” (A p. 74

)

0

The large core filter is for use with an AV cable. Do not use it with any cable other than the AV cable.

The small core filter is for use with the AC adapter. Do not use it with anything other than the AC adapter.

“Attaching the Core Filter” (A p. 9)

0

SD cards are sold separately.

“Types of Usable SD Card” (A p. 10)

0

When using the AC adapter overseas, please prepare a commercially available converter plug for the country or region of visit.

“Charging the Battery Pack Overseas” (A p. 20)

Getting Started

4

Turning on this Unit

Open the LCD monitor to turn on this unit.

To turn off the power, close the LCD monitor.

o

To turn on the power

Open the LCD monitor.

.

o

To turn off the power

Close the LCD monitor.

.

The POWER/ACCESS lamp goes off and the power is turned off.

“POWER/ACCESS (Power/Access) Lamp” (A p. 148

)

Opening the Terminal Cover (SD Card Cover)

o

To open

.

A

Open the LCD monitor.

B

Slide down the cover lock and slide the cover aside.

C

Lift the cover slowly.

o

To close

.

Leave the LCD monitor open first.

A

Flip

down the cover slowly while making sure the gray waterproof seal

fits into the opening at the terminals.

B

Press the entire cover against the camcorder with equal force and firmly

attach the cover completely.

C

Slide the cover until it clicks into place.

The cover is not properly closed if the red mark on the cover lock is visible.

Caution :

0

Ensure that the terminal cover and the gray waterproof seal are not

damaged and that there are no foreign materials (such as hair, lint, sand

or dust) adhered on the cover.

0

Stop using the unit underwater if there are damages to the cover, etc. and

consult your JVC dealer or the nearest JVC service center.

0

Do not apply excessive force when opening/closing the terminal cover.

0

Read the “Cautions on Using Underwater” (A p. 7) before using the

camera underwater or in places exposed to water droplets.

Getting Started

5

Charging

This unit is equipped with a built-in battery.

Open the connector cover, and connect the AC adapter for charging as

shown in the figure.

.

Caution :

0

The built-in battery is not charged at the time of purchase.

0

At

the time of purchase or in case of the battery is not used for a long period

of time, the charging time will be longer than usual. The camera does not

turn on if the remaining battery power is low. In this case, charge the battery

for more than 40 minutes before turning on the power.

0

Charging time: Approx. 6 h 10 m (when charging at 25 ℃)

0

The battery cannot be charged outside the room temperature range of

10°C to 35°C. The CHARGE lamp does not light up when the battery is

not being charged. If the temperature increases or decreases during

charging, the CHARGE lamp will blink slowly and charging will stop. In this

case, remove the AC adapter, press the Reset button and wait until the

room temperature is within the above stated range before charging again.

0

You can record or play back videos during charging. (However, the

charging time will be longer than usual. In addition, the remaining battery

power may decrease according to conditions.) If the internal temperature

rises when using the unit, stop the charging temporarily. (The CHARGE

lamp goes off.)

0

If malfunctions (such as overvoltage) occur, charging will stop. In these

cases, CHARGE lamp blinks quickly as a notification.

0

During charging, the P icon on the screen changes to O to indicate that

charging is in progress. (when the provided AC adapter is used)

0

When the recording time becomes extremely short even when the battery

is fully charged, the battery needs to be replaced. For details on replacing

the built-in battery (subject to a fee), consult the nearest JVC service

center.

Caution :

0

There are certain specifications for a USB rechargeable device. To

charge, use a device with the output voltage of 5 V/1 A or more.

0

Depending

on the specification of your charging device and the thickness

and length of an USB cable used to connect to this unit, the charging time

may be longer than usual, or it may not even start.

0

We shall not be held liable for malfunctions that are due to using non-

standard device or a device with poor quality.

Resetting this Unit

When a malfunction occurs on this unit, reset the unit in the following way.

(Resetting the unit does not erase the recorded data.)

1

Open the terminal cover.

0

Remove the power cord and all connecting cables.

2

Close the LCD monitor to turn off this unit.

3

Press the Reset button gently using an object with pointed tip.

Caution :

0

Press the Reset button just once gently.

0

Do

not use sharp pointed objects. It may damage the unit or cause electric

shock.

Memo :

0

If malfunction persists even after pressing the Reset button, consult the

nearest JVC service center.

Getting Started

6

Quad Proof

This unit is equipped with Waterproof, Dust-proof, Drop-proof and Freeze-

proof features.

.

Waterproof:

Equivalent to IEC

Standard publication

529 IPX8 and IPX6 (30

minutes

at depths up to

5 m)

.

Dust-proof: Equivalent

to IEC Standard

publication 529 IP5X

.

Drop-proof: This

camera clears

company testing

compliant with MIL-

STD-810F Method;

516.5

Shock: Dropping onto

plywood 3 cm thick

from a height of 1.5 m

.

Freeze-proof:

Allowable operating

temperatures: −10°C

to +40°C

Note: Temperatures

between −10°C and

0°C temporarily lower

battery performance,

reducing the time

available for

recording.

Caution :

0

There

is no guarantee that there will be no damages when the unit is used

within the above-mentioned limits.

Scratches and dent caused by the impact if the unit is dropped, or other

changes in appearance are not included in the warranty.

0

Malfunction due to mishandling will void the warranty.

0

Before use in water, be sure to read and understand the “Before Using

Underwater or under Low Temperature” (A p. 7) .

0

Close the terminal cover firmly until it clicks and confirm that the red sign

completely goes off.

0

Make sure that there is no damage to and no foreign material adhered to

the packing inside the cover.

0

Use within a water depth of 5 m and a duration of 30 minutes.

0

The waterproof performance cannot be guaranteed if the camcorder is

subject to impact such as dropping.

0

Do not jump or dive into water holding the camcorder.

0

Do not use the camcorder in strong water flows such as in rapids or under

waterfalls. The strong water pressure may impair the waterproof

performance.

0

Do not immerse into hot spring, or hot water above 40°C.

Before Using Underwater or under Low Temperature

“Cautions on Using Underwater” (A p. 7)

“Maintenance after Use” (A p. 8)

“Cautions on Using under Low Temperature” (A p. 8)

Cautions on Using Underwater

Please take note of the followings when using this unit near water or

underwater.

0

Ensure that the cover is closed tightly.

“Opening the Terminal Cover (SD Card Cover)” (A p.

5)

0

Ensure that the terminal cover and the gray waterproof seal are not

damaged and that there are no foreign materials (such as hair, lint, sand

or dust) adhered on the cover.

0

Stop using the unit underwater if there are damages to the cover, etc.

and consult your JVC dealer or the nearest service center.

0

Use within a water depth of 5 m and a duration of 30 minutes.

.

0

Do not open/close the cover or insert/remove an SD card or any cables

while using underwater or on the beach, or if your hands contain water

droplets or sands. Doing so may cause water to enter into the camera or

malfunction.

0

Do

not subject the camera to high pressure or vibration resulted from swift

current, waterfall or diving into water.

0

The waterproof performance is not guaranteed if the camera is dropped

or subjected to other impact shock. If the camera has been subjected to

impact shock, consult your nearest service center.

0

While shooting underwater, noise generated inside of the camera

(zooming sounds, etc) may be picked up. This is not a malfunction.

0

Do not immerse into hot spring, or hot water above 40°C. Doing so

deteriorates waterproof performance.

0

Keep away from hands with sun oil or sun screen. Doing so may cause

discoloration or deterioration of material.

0

This unit sinks underwater. Fasten the grip belt firmly to prevent losing the

camera underwater.

0

The accessories are not waterproof.

0

Wi-Fi function is not available underwater.

Getting Started

7

Maintenance after Use

After using underwater or in dusty places, rinse the camera with water

immediately and dry it completely.

1

Ensure that the terminal cover is closed.

2

Rinse with clean water.

Soak

the camera in a container filled with enough water to immerse the

camera completely, and rinse it gently.

.

0

After using the camera under the sea or on the beach, immerse the

camera in fresh water for about 10 minutes to remove salt particles,

replace the water and rinse the camera.

0

Open and close the LCD screen, and operate the buttons or zoom

operations to get rid of sands or dusts in the gap.

3

Dry the camera.

Wipe

the camera completely with a soft dry cloth and allow it to dry in a

well-ventilated and shady location.

0

Place the camera with the lens facing downward while the LCD

monitor is closed, and leave it for approximately 10 minutes. (By doing

so, microphone and LDC part are dried out easily.) Place the camera

in a up right position on a dry cloth afterward Close the terminal cover

after the camera is dried out completely.

0

Wipe off any foreign materials or water droplets inside the cover.

* If you leave the camera immersed in salt water or allow water droplets from

the salt water to remain on the camera, this may cause corrosion,

discoloration or deterioration of waterproof performance.

* If you wipe or dry the camera with sand particles adhered, this may cause

scratches on the camera.

* Do not wash with chemicals, soap, neutral detergents, or alcohol.

* Do not dry the camera with a hair dryer or other heat sources. This could

impair its waterproof performance.

Cautions on Using under Low Temperature

0

The

performance of the battery will drop temporarily when the temperature

is -10°C to 0°C, this will cause the remaining recording time to shorten.

0

Charging cannot be performed when the surrounding temperature is

below 10 °C.

0

Turning on the camera while it is still cold will deteriorate the performance

of the LCD monitor. Problems such as the screen becoming dark

momentarily or residual image can occur.

0

If snow or water droplets adhere to the camera under sub-zero

temperature environment, ice can formed between the gaps around the

buttons, speaker or microphone. This will cause difficulty in operating the

buttons as well as decrease in the volume level.

0

Direct contact with exposed metal part under cold temperature can cause

the skin to stick on the metal part resulting in injuries such as frostbite. Do

not touch with bare hands.

Other Precautions

0

Do

not leave the camera under low temperature in cold climates or under

high temperature above 40 °C (such as under direct sunlight, inside a

vehicle in the hot sun, or near a heater). This will cause deterioration of

the waterproof performance.

0

Malfunction due to mishandling will void the warranty.

0

We are not responsible for any loss of data due to water entering into inside

of the camera. Please be forewarned.

0

It is recommended to replace the waterproof packing once a year to

maintain the waterproof performance. Consult your nearest service

center. (Subject to a fee)

Getting Started

8

Grip Adjustment

.

A

Open the pad

B

Adjust the length of the belt

C

Close the pad

Caution :

0

Be sure to fasten the grip belt properly.

If the belt is loose, this unit may drop and result in injuries or damages.

Attaching the Core Filter

Attaching

core filter to the cable of the AC adapter and the AV cable (on the

end connected to this unit) can reduce the interference generated when this

unit is connected to an external device.

0

Use the small core filter with the power cable, and the large core filter with

the AV cable.

0

Do not attach the core filter to the provided adapter cable.

.

Getting Started

9

Inserting an SD Card

When a commercially available SD card is inserted, recordings can still be

made

to the card without stopping when the remaining recording time on the

built-in memory runs out.

“Types of Usable SD Card” (A p. 10)

“Approximate Video Recording Time” (A p. 50)

1

Open the terminal cover.

.

2

Close the LCD monitor to turn off this unit.

3

Insert an SD card.

.

Warning

0

Make sure not to insert the SD card in the wrong direction.

It may cause damage to the unit and SD card.

0

Before inserting or removing the SD card, close the LCD monitor and

ensure that the POWER/ACCESS lamp goes off.

0

Do not touch the metal contact area when inserting the SD card.

Memo :

0

When “SEAMLESS RECORDING” is set to “ON”, recordings can still be

made

to the SD card without stopping when the remaining recording time

on the built-in memory runs out.

“ SEAMLESS RECORDING ” (A p. 133)

0

Both videos and still images can be recorded on one SD card. It is

recommended to confirm the video operation of the SD card before usage.

0

To record to an SD card, it is necessary to set the recording media to “SD

CARD”.

“ REC MEDIA FOR VIDEO ” (A p. 143)

“ REC MEDIA FOR IMAGE ” (A p. 144)

0

To use a new SD card, or SD card used on other devices, it is necessary

to format (initialize) the SD card using “FORMAT SD CARD” from the

“SETUP” menu.

“ FORMAT SD CARD ” (A p. 144)

Removing the Card

Push the SD card inward once, then pull it out straight.

.

Types of Usable SD Card

The following SD cards can be used on this unit.

Operations

are confirmed on the SD cards from the following manufacturers.

0

Panasonic

0

TOSHIBA

0

SanDisk

SD Card

.

0

This unit supports 256 MB to 2 GB SD cards.

0

Use a Class 4 or higher compatible SD card (2 GB) for video recording.

SDHC Card

.

0

Use

a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video

recording.

SDXC Card

.

0

Use a Class 4 or higher compatible SDXC card (Max. 128 GB) for video

recording.

Getting Started

10

Memo :

0

Using

SD cards (including SDHC/SDXC cards) other than those specified

above may result in recording failure or data loss.

0

This unit is not guaranteed to operate with all SD cards. Some SD cards

may not work due to specification changes, etc.

0

Do not use a miniSD card or microSD card (even if the card is inserted in

an adapter). It may cause malfunction.

0

To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6 or

higher compliant SDHC/SDXC card is recommended.

0

To select “50p” in “SYSTEM SELECT”, use a Class 6 or higher compliant

SDHC/SDXC card.

0

Class 4 and Class 6 are guaranteed to have a minimum transfer rate of 4

MB/s and 6 MB/s respectively during reading or writing of data.

0

You can also use a Class 10 compliant SDHC/SDXC card.

0

Both videos and still images can be recorded on one SD card. It is

recommended to confirm the video operation of the SD card before usage.

0

To protect the data, do not touch the terminals of the SD card.

0

UHS-I SDHC/SDXC cards can be used in the same manner as standard

SDHC/SDXC cards.

UHS Speed Class is not supported.

0

An SD card which is used for recording and/or editing on other devices

may not be played back or edited on this unit.

0

An SD card which is used for recording on this unit may not be used for

playing back and/or editing on other devices.

When your computer cannot recognize the SDXC card

Confirm and update the OS of your computer.

Windows

Vista

0

Make sure that the operating system version is SP1 or

higher.

0

Download

and install the updating program (KB975823)

from the following URL.

32 bit version

http://www.microsoft.com/downloads/details.aspx?

displaylang=ja&FamilyID=2d1abe01-0942-4f8a-

abb2-2ad529de00a1

http://www.microsoft.com/downloads/en/details.aspx?

FamilyID=2d1abe01-0942-4f8a-abb2-2ad529de00a1

64 bit version

http://www.microsoft.com/downloads/details.aspx?

displaylang=ja&FamilyID=7d54c53f-017c-4ea5-

ae08-34c3452ba315

http://www.microsoft.com/downloads/en/details.aspx?

FamilyID=7d54c53f-017c-4ea5-ae08-34c3452ba315

Windows 7 Download and install the updating program (KB976422)

from the following URL.

32 bit version

http://www.microsoft.com/downloads/details.aspx?

displaylang=ja&FamilyID=3ee91fc2-a9bc-4ee1-

aca3-2a9aff5915ea

http://www.microsoft.com/downloads/en/details.aspx?

FamilyID=3ee91fc2-a9bc-4ee1-aca3-2a9aff5915ea

64 bit version

http://www.microsoft.com/downloads/details.aspx?

displaylang=ja&FamilyID=73f766dd-7127-4445-

b860-47084587155f

http://www.microsoft.com/downloads/en/details.aspx?

FamilyID=73f766dd-7127-4445-b860-47084587155f

Mac OS X

10.4

Tiger /

Mac OS X

10.5

Leopard

Not compatible.

Mac OS X

10.6 Snow

Leopard

Update the OS version to 10.6.5 or later.

Getting Started

11

Using the Touch Screen

The LCD monitor of this unit is a touch panel which enables operations by

touching the screen.

Icon operation buttons, thumbnails, and menu items are displayed on the

touch screen according to the mode in use.

0

There

are two ways to operate the touch screen, namely “tap” and “drag”.

The following are some examples.

A Tap the displayed button (icon) or thumbnail (file) on the touch screen

to make selection.

B Drag the thumbnails on the touch screen to search for the desired file.

.

Memo :

0

The touch screen of this unit is pressure-sensitive. When the touch screen

does not respond smoothly, apply slightly more force to your fingertip.

0

Tap the buttons (icons) on the touch screen accurately. The buttons may

not respond if they are not tapped on the right area.

0

Do not press or rub with excessive force.

0

Do not operate the touch screen using an object with a sharp tip.

0

Pressing two or more places at a time may cause a malfunction.

0

Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is

misaligned with the touched area. (Adjust by lightly tapping with a corner

of an SD card, etc. Do not press with an object with a sharp tip or do not

press hard.)

“Adjusting the Touch Panel” (A p. 13)

0

You cannot operate the touch screen under water. Lock the screen to

prevent operation errors.

“Shooting under Water” (A p. 35)

Locking the Screen (when Shooting Underwater)

Lock the screen before using this unit underwater to prevent operation errors

on the touch screen.

0

Once the screen is locked, operations on the touch screen are disabled.

0

The START/STOP (recording) button and the zoom lever can be used

while the screen is locked.

0

You can set for both video and still image modes.

0

If “SCREEN LOCK” has been set, it will take a longer time for the unit to

power off after closing the LCD monitor.

o

Setting the “SCREEN LOCK”

A

Check that the unit is in the recording mode.

B

Tap “MENU”.

C

Tap “RECORD SETTING”.

D

Tap “SCREEN LOCK”.

0

The L button appears on the screen.

.

o

To cancel “SCREEN LOCK”

Tap the L

button.

Memo :

0

Once

“SCREEN LOCK” is set, only the L button on the touch screen can

be operated.

0

“SCREEN LOCK” cannot be set for the following cases:

- during recording

- when “TIME-LAPSE RECORDING” or “DATE/TIME RECORDING” has

been set

Getting Started

12

Adjusting the Touch Panel

Adjusts the response position of the buttons on the touch screen.

1

Tap “MENU”.

.

2

Tap “SETUP”.

.

3

Tap “TOUCH SCREEN ADJUST”.

.

0

The touch screen adjustment screen appears.

4

Tap “+”. (3 times in total)

.

0

Keep tapping “+” as its position changes with every tap.

0

If areas other than the “+” mark are tapped, errors will occur. Make

sure to tap the “+” mark.

5

Tap “+” again to confirm the adjusted positions. (3 times in total)

.

0

Keep tapping “+” as its position changes with every tap.

6

Tap “OK”.

.

0

Setting ends and returns to the menu screen.

Caution :

0

Do not tap areas other than the “+” mark during touch screen adjustment

(steps 4 - 5). Doing so may cause the touch screen to malfunction.

Memo :

0

Adjust by lightly tapping with a corner of an SD card, etc.

0

Do not press with an object with a sharp tip or do not press hard.

Getting Started

13

Names of Buttons and Functions on the LCD Monitor

The following screens are displayed during the A video and B still image

modes, and operate as touch screens.

Recording Screen (Video/Still Image)

.

1

A/B (Video/Still Image) Mode Button

0

Switches between A video and B still image modes.

2

Zoom Button

“Zooming” (A p. 28)

3

Still Image Recording Button

0

Records still images during video recording.

“Capturing Still Images During Video Recording” (A p. 25

)

4

Playback Mode Button

0

Switches to the playback mode.

5

Recording Start/Stop Button

0

6: Video Recording Start Button

0

7: Video Recording Stop Button

6

Menu Button

“Operating the Menu” (A p. 130)

7

Display Button

Switches the display between full (m) and simple (n) with every tap of

the button.

0

Simple display: Some displays disappear automatically when the

screen is not operated.

0

Full display: Displays everything. The display button changes from n

to m.

0

When the power is turned off, the display setting will revert to simple

display (n).

8

Recording Mode Button

Switches the recording mode (P Intelligent Auto/H Manual).

Playback Screen (Video)

.

0

When

this unit is not operated, the operation buttons on the LCD monitor

disappear automatically. Tap on the screen to display the operation

buttons again.

1

A/B

(Video/Still Image) Mode Button

0

Switches between A video and B still image modes.

2

Video Scene Capture Button

0

Displayed when playback is paused.

0

Saves one scene of the video being played back as a still image.

3

Recording Mode Button

0

Switches to the recording mode.

4

Index Screen (Thumbnail Display) Button

0

Returns to the index screen (thumbnail display).

“Operation Buttons for Video Playback” (A p. 52)

5

Delete Button

“Deleting the Currently Displayed File” (A p. 66)

6

Playback Zoom Button

0

Enlarges the video image that is played back.

“During Video Playback” (A p. 53)

7

Menu Button

“Operating the Menu” (A p. 130)

8

Operation Buttons

“Operation Buttons for Video Playback” (A p. 52)

9

Display Button

Switches the display between full (m) and simple (n) with every tap of

the button.

0

Simple display: Some displays disappear automatically when the

screen is not operated.

0

Full display: Displays everything. The display button changes from n

to m.

0

When the power is turned off, the display setting will revert to simple

display (n).

Getting Started

14

Playback Screen (Still Image)

.

0

When

this unit is not operated, the operation buttons on the LCD monitor

disappear automatically. Tap on the screen to display the operation

buttons again.

1

A/B

(Video/Still Image) Mode Button

0

Switches between A video and B still image modes.

2

Recording Mode Button

0

Switches to the recording mode.

3

Index Screen (Thumbnail Display) Button

0

Returns to the index screen (thumbnail display).

“Operation Buttons for Still Image Playback” (A p. 61)

4

Delete Button

“Deleting the Currently Displayed File” (A p. 66)

5

Playback Zoom Button

0

Enlarges the still image that is being played back.

“Playing Back Still Images” (A p. 62)

6

Menu Button

“Operating the Menu” (A p. 130)

7

Operation Buttons

“Operation Buttons for Still Image Playback” (A p. 61)

8

Display Button

Switches the display between full (m) and simple (n) with every tap of

the button.

0

Simple display: Some displays disappear automatically when the

screen is not operated.

0

Full display: Displays everything. The display button changes from n

to m.

0

When the power is turned off, the display setting will revert to simple

display (n).

Index Screen (Thumbnail Display) Display

.

1

A/B (Video/Still Image) Mode Button

0

Switches between A video and B still image modes.

2

Page Forward/Back Button

“Operation Buttons for Video Playback” (A p. 52

)

“Operation Buttons for Still Image Playback” (A p. 61)

3

Recording Mode Button

0

Switches to the recording mode.

4

Mark Playback button (video only)

0

Allows scenes that are marked to be played back easily.

“ MARKING PLAYBACK ” (A p. 55)

5

Delete Button

“Deleting Selected Files” (A p. 66)

“Deleting the Currently Displayed File” (A p. 66)

6

Playback Media Button

0

Switches between SD card and built-in memory.

7

Menu Button

“Operating the Menu” (A p. 130)

8

Date Button

“Operation Buttons for Video Playback” (A p. 52)

“Operation Buttons for Still Image Playback” (A p. 61)

Getting Started

15

Menu screen (recording mode)

.

1

SILENT Button

“Using the Silent Mode” (A p. 24)

2

INFO. Button

“Checking the Remaining Recording Time” (A p. 49)

3

Wi-Fi Button

“Using Wi-Fi” (A p. 86)

4

SETUP Menu

“SETUP (video/still image)” (A p. 142)

5

CONNECTION SETTINGS Menu

“CONNECTION SETTINGS (video/still image)” (A p. 145)

6

RECORD SETTING Menu

“RECORD SETTING Menu (video)” (A p. 131)

“RECORD SETTING Menu (still image)” (A p. 136)

7

Close Button

Exit the menu.

Menu screen (playback mode)

.

1

SILENT Button

“Using the Silent Mode” (A p. 24)

2

INFO. Button (Displayed only after playback)

“Checking the Recording Date and Other Information” (A p. 54

)

3

PLAYBACK SETTING Menu

“PLAYBACK SETTING Menu (video)” (A p. 138)

“PLAYBACK SETTING Menu (still image)” (A p. 140)

4

SETUP Menu

“SETUP (video/still image)” (A p. 142)

5

CONNECTION SETTINGS Menu

“CONNECTION SETTINGS (video/still image)” (A p. 145)

6

EDIT Menu

“EDIT Menu (video)” (A p. 139)

“EDIT Menu (still image)” (A p. 141)

7

Close Button

Exit the menu.

Getting Started

16

Clock Setting

The “SET DATE/TIME!” screen appears when you turn on this unit for the

first

time after purchase, when it has not been used for a long time, or when

the clock is not set yet.

Set the clock before recording.

1

Open the LCD monitor.

.

0

The unit turns on.

0

When the LCD monitor is closed, the unit turns off.

2

Tap “OK” when “SET DATE/TIME!” is displayed.

.

3

Set the date and time.

.

0

When the year, month, day, hour, or minute item is tapped, “3” and

“2” will be displayed.

0

Tap 3 or 2 to adjust the year, month, day, hour, and minute.

4

After setting the date and time, tap “SAVE”.

5

Select the region where you live and tap “SAVE”.

.

0

Time difference between the selected city and the GMT (Greenwich

Mean Time) is displayed.

0

Tap 0 or 1 to select the city name.

Memo :

0

The clock can be reset again later.

“Resetting the Clock” (A p. 17)

0

When using this unit overseas, you can set it to the local time for recording.

“Setting the Clock to Local Time when Traveling” (A p. 20)

0

The clock is reset about one month after the battery is depleted. “SET

DATE/TIME!” is displayed the next time you turn on this unit. Set the clock

again after charging the battery.

Resetting the Clock

Set the clock with “DATE & TIME” from the menu.

1

Tap “MENU”.

.

2

Tap “SETUP”.

.

3

Tap “DATE & TIME”.

.

0

Tap 3 or 2 to scroll the screen.

4

Tap “CLOCK SETTING”.

.

5

Set the date and time.

.

0

When the year, month, day, hour, or minute item is tapped, “3” and

“2” will be displayed.

0

Tap 3 or 2 to adjust the year, month, day, hour, and minute.

6

After setting the date and time, tap “SAVE”.

Getting Started

17

7

Select the region where you live and tap “SAVE”.

.

0

Time difference between the selected city and the GMT (Greenwich

Mean Time) is displayed.

0

Tap 0 or 1 to select the city name.

Changing the Display Language

The language on the display can be changed.

1

Tap “MENU”.

.

2

Tap “SETUP”.

.

3

Tap “LANGUAGE”.

.

0

Tap 3 or 2 to scroll the screen.

4

Tap to the desired language.

.

0

Tap 3 or 2 to scroll the screen.

Getting Started

18

Holding this Unit

When holding this unit, keep your elbows close to your sides to prevent

camera shake.

.

0

Hold

the LCD monitor with your left hand and adjust the angle accordingly.

Holding the LCD monitor with your left hand helps to stabilize the camera

for recording.

Caution :

0

Be careful not to drop this unit during transportation.

0

Guardians should pay close attention when this unit is used by children.

Memo :

0

If camera shake is excessive, use the image stabilizer.

“Reducing Camera Shake” (A p. 43

)

Tripod Mounting

This unit can be mounted on a tripod (or monopod). This is useful for

preventing camera shake and recording from the fixed position.

.

0

To

prevent this unit from falling off, check the tripod mounting screw holes

and positioning holes on the unit carefully before mounting, and turn the

screws until they are fastened firmly.

Caution :

0

To prevent injuries or damages which may result if this unit falls off, read

the instruction manual of the tripod (or monopod) to be used and make

sure that it is securely attached.

Memo :

0

It is recommended to use a tripod or monopod when recording in

conditions

prone to camera shake (such as in dark places or when zoomed

to the telephoto end).

0

Set the image stabilizer to b (OFF) when using a tripod for recording.

Getting Started

19

Using this Unit Overseas

The shape of the power outlet varies according to countries and regions.

To charge the battery pack, you need a converter plug that matches the

shape of the outlet.

“Charging the Battery Pack Overseas” (A p. 20)

Change the date and time display to the local time by selecting your travel

destination in “AREA SETTING” of “DATE & TIME”.

“Setting the Clock to Local Time when Traveling” (A p. 20)

When

“ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set

1 hour ahead.

“Setting Daylight Saving Time” (A p. 21)

Charging the Battery Pack Overseas

The shape of the power outlet varies according to countries and regions.

To charge the battery pack, you need a converter plug that matches the

shape of the outlet.

.

Setting the Clock to Local Time when Traveling

Change the date and time display to the local time by selecting your travel

destination in “AREA SETTING” of “DATE & TIME”.

Restore the region settings after you returned from the trip.

1

Tap “MENU”.

.

2

Tap “SETUP”.

.

3

Tap “DATE & TIME”.

.

0

Tap 3 or 2 to scroll the screen.

4

Tap “AREA SETTING”.

.

5

Select the area you are traveling to and tap “SAVE”.

.

0

Time difference between the selected city and the GMT (Greenwich

Mean Time) is displayed.

0

Tap 0 or 1 to select the city name.

Memo :

0

Setting

“AREA SETTING” changes the clock time such that time difference

is accounted for.

After returning to your country, re-select the region that was set initially to

restore the original clock settings.

Getting Started

20

Leht laadib ...

JVC GZ-RX515 Kasutusjuhend

See käsiraamat sobib ka

JVC GZ-RX515 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid