Monster Power Nomad Lühike juhend

Kaubamärk
Monster Power
Mudel
Nomad
Tüüp
Lühike juhend

See juhend sobib ka

Quick Start Guide
For complete operational guidelines,
please refer to your user manual.
Basic Set upBluetooth® Connection
Charge the Unit FM / USB Charging
on the Nomad
2 3
Connect Microphone
5
Manual Bluetooth Pairing
Pairing Using NFC
- By connecting the AC power, the battery will
begin to charge. Switch the Power switch (ON/OFF)
to ON position to power on Speaker
- If Red LED indicator is flashing, this means that
battery levels are low and need charging.
- If Red LED indicator is on, this means the battery
level is full
n
Place the speaker and your Bluetooth device so they are
no more than 3 feet apart.
Press the source button until “BT” Mode is displayed on screen.
Press and hold “Bbutton on Speaker for 2 seconds to enter
into Bluetooth pairing mode. BT Blue LED will flash.
Monster Nomad
Bluetooth LED turns solid once a
Bluetooth device has been paired.
the
4
A. Listening to FM radio
- Press the "Source" button to select FM source, the radio
station frequency is displayed on screen.
- Press and hold ( t or u) to search a station with strong
reception automatically.
B. Store your favorite four radio stations manually
- Tune to a radio station.
- Press and hold a number key (1-4) to enter programming
mode; the corresponding number blinks on the screen;
and your station is saved
- Repeat above step 1-2 to store additional presets
• Turn on NFC function on your Bluetooth enabled device.
• Place your Bluetooth device on the “NFC” on
the right side of the Monster Nomad handle
• Confirm Bluetooth connection on your Bluetooth device.
Note: 1. Ensure the unit is compatible with Bluetooth before pairing via NFC
2. The Blue LED indicator will become when NFC pairing is successful.
• Once paired you can play audio from your Bluetooth
device.
Bluetooth Pairing
NOMAD
A. Connect Microphone
- Plug your microphone to the input labeled “MIC/Guitar”
above the Volume knob
- Once the microphone is plugged in through the supplied
Mic/Guitar converting the header (6.5mm to 3.5mm) select
the “MIC/Guitar” button
- Now control your microphone volume on the smaller knob
on the far left of the dashboard of the speaker
*Make sure your microphone is also switched to “On”
Connect the AC Power
1
• Connect the included AC Cable to the speaker
• Plug cord into a wall outlet.
• Charge battery for approximately 6 hours in power o
mode before you start using the unit for the rst time
  • Page 1 1

Monster Power Nomad Lühike juhend

Kaubamärk
Monster Power
Mudel
Nomad
Tüüp
Lühike juhend
See juhend sobib ka
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid