Hach HQ440d Basic User Manual

DOC022.98.80116

HQ440d, HQ430d, HQ411d

05/2017, Edition 4

Basic User Manual

Basis-Bedienungsanleitung

Manuale utente di base

Manuel d'utilisation de base

Manual básico del usuario

Manual de operações básicas

Základní uživatelská příručka

Grundlæggende brugervejledning

Basisgebruikershandleiding

Podstawowa instrukcja obsługi

Grundläggande bruksanvisning

Peruskäyttöohje

Основно ръководство за потребителя

Alap felhasználói kézikönyv

Manual de bază al utilizatorului

Bendroji naudotojo instrukcija

Основное руководство пользователя

Temel Kullanıcı Kılavuzu

Základný návod na použitie

Osnovni uporabniški priročnik

Osnovni korisnički priručnik

Βασικό εγχειρίδιο χρήστη

Kokkuvõtlik kasutusjuhend

English..............................................................................................................................3

Deutsch.......................................................................................................................... 18

Italiano............................................................................................................................ 36

Français......................................................................................................................... 54

Español.......................................................................................................................... 72

Português...................................................................................................................... 90

Čeština......................................................................................................................... 108

Dansk............................................................................................................................125

Nederlands................................................................................................................. 142

Polski............................................................................................................................ 160

Svenska....................................................................................................................... 178

Suomi............................................................................................................................196

български................................................................................................................... 213

Magyar......................................................................................................................... 232

Română....................................................................................................................... 250

lietuvių kalba...............................................................................................................268

Русский........................................................................................................................285

Türkçe...........................................................................................................................303

Slovenský jazyk......................................................................................................... 320

Slovenski..................................................................................................................... 338

Hrvatski........................................................................................................................ 356

Ελληνικά...................................................................................................................... 374

eesti keel..................................................................................................................... 393

2

Table of contents

Specifications on page 3

General information on page 3

Installation on page 6

User interface and navigation on page 8

Startup on page 10

Standard operation on page 11

Data management on page 12

Maintenance on page 15

Troubleshooting on page 16

Specifications

Specifications are subject to change without notice.

Specification Details

Dimensions 17.48 x 8.59 x 23.5 cm (6.88 x 3.38 x 9.25 in.)

Weight 750 g (1.65 lb) without batteries

Meter enclosure IP54 with battery cover in place (resistant to intrusion of dust and water spray)

Power requirements (internal) AA Alkaline or rechargeable Nickel Metal Hydride (NiMH) batteries (4); battery

life: up to 200 hours

Power requirements (external) Class II, external power adapter: 100–240 VAC, 50/60 Hz input; 4.5 to 7.5 VDC

(7 VA) output

Meter protection class Class I

Storage temperature –20 to +60 °C (–4 to +140 °F)

Operating temperature 5 to 45 °C (41 to 113 °F)

Operating humidity 90% (non-condensing)

5-pin input connector M12 connector for IntelliCAL

™

probes

Data memory (internal) 500 results

Data storage Automatic in Press to Read mode and Interval Mode. Manual in Continuous

Read Mode.

Data export USB connection to PC or USB storage device (limited to the storage device

capacity). Transfer entire data log or as readings are taken.

Connections Integrated USB type A (for USB 2.0 flash memory device, printer, keyboard) and

Integrated USB type B (for PC)

Temperature correction Off, automatic and manual (parameter dependent)

Measurement display lock Continuous measurement, Interval or Press to Read mode. Averaging function

for LDO probes.

Keyboard External PC keyboard connector with USB/DC adapter

Additional information

Additional information is available on the manufacturer's website.

General information

In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential

damages resulting from any defect or omission in this manual. The manufacturer reserves the right to

make changes in this manual and the products it describes at any time, without notice or obligation.

Revised editions are found on the manufacturer’s website.

English

3

Safety information

N O T I C E

The manufacturer is not responsible for any damages due to misapplication or misuse of this product including,

without limitation, direct, incidental and consequential damages, and disclaims such damages to the full extent

permitted under applicable law. The user is solely responsible to identify critical application risks and install

appropriate mechanisms to protect processes during a possible equipment malfunction.

Please read this entire manual before unpacking, setting up or operating this equipment. Pay

attention to all danger and caution statements. Failure to do so could result in serious injury to the

operator or damage to the equipment.

Make sure that the protection provided by this equipment is not impaired. Do not use or install this

equipment in any manner other than that specified in this manual.

Use of hazard information

D A N G E R

Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or serious injury.

W A R N I N G

Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death or serious

injury.

C A U T I O N

Indicates a potentially hazardous situation that may result in minor or moderate injury.

N O T I C E

Indicates a situation which, if not avoided, may cause damage to the instrument. Information that requires special

emphasis.

Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or damage to the instrument

could occur if not observed. A symbol on the instrument is referenced in the manual with a

precautionary statement.

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety

information.

This symbol indicates that the marked item can be hot and should not be touched without care.

Electrical equipment marked with this symbol may not be disposed of in European domestic or public

disposal systems. Return old or end-of-life equipment to the manufacturer for disposal at no charge to

the user.

Product overview

The HQd series laboratory meters are used with digital IntelliCAL

™

probes to measure various

parameters in water. The meter automatically recognizes the type of probe that is connected to the

meter. Measurement data can be stored and transferred to a printer, PC or USB storage device

(Refer to Figure 1).

The HQd series meters are available in 3 models:

• HQ411d—pH/mV/ORP (Redox)

4

English

• HQ430d—Multi-parameter, single probe input

• HQ440d—Multi-parameter, dual probe inputs

Features common to all models:

• Automatic probe and parameter recognition

• Instrument guided calibration procedures

• Calibration data stored in the probe

• Probe specific method settings for regulatory compliance and Good Laboratory Practice (GLP)

• Security Options

• Real-time data logging with a USB connection

• USB connectivity to PC/printer/USB storage device/keyboard

• Bi-directional communication with PC-based systems with a virtual serial port connection

• Sample ID and Operator ID for data traceability

• Adjustable automatic shut-off

Figure 1 Product overview

1 ON/OFF: turn on or turn off the meter 4 DC power connector

2 Probe connection port (HQ440d model) 5 USB connector type A (for USB storage device,

printer and keyboard)

3 USB connector type B (for PC connections) 6 Probe connection port

English 5

Product components

Refer to Figure 2 to make sure that all components have been received. If any items are missing or

damaged, contact the manufacturer or a sales representative immediately.

Figure 2 Meter components

1 HQ440d, HQ430d or HQ411d meter 3 AC/DC power supply with cable

2 AA batteries (pk/4) 4 USB cable (HQ440d, HQ430d models only)

Installation

C A U T I O N

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the

document.

Connect to AC power

D A N G E R

Electrocution Hazard. AC power outlets in wet or potentially wet locations MUST ALWAYS be provided

with a Ground Fault Circuit Interrupting (GFCI/GFI) circuit breaker. The AC-DC power adapter for this

product is not sealed and must not be used on wet benches or in wet locations without GFCI protection.

The meter can be powered by AC power with the universal power adapter.

1. Set the meter to OFF.

2. Connect the AC/DC power supply to the meter. Refer to Figure 3.

3. Connect the AC/DC power supply to an AC receptacle.

4. Set the meter to ON.

Figure 3 AC power connection

6 English

Install the batteries

W A R N I N G

Explosion hazard. Incorrect battery installation can cause the release of explosive gases. Be sure that the

batteries are of the same approved chemical type and are inserted in the correct orientation. Do not mix new and

used batteries.

N O T I C E

The battery compartment is not waterproof. If the battery compartment becomes wet, remove and dry the

batteries and dry the interior of the compartment. Check the battery contacts for corrosion and clean them if

necessary.

N O T I C E

When using nickel metal hydride (NiMH) batteries, the battery icon will not indicate a full charge after freshly

charged batteries have been inserted (NiMH batteries are 1.2 V versus 1.5 V for alkaline batteries). Even though

the icon does not indicate complete charge, 2300 mAH NiMH batteries will achieve 90% of instrument operation

lifetime (before recharge) versus new alkaline batteries.

N O T I C E

To avoid potential damage to the meter from battery leakage, remove the meter batteries prior to extended

periods of non-use.

The meter can be powered with AA alkaline or rechargeable NiMH batteries. To conserve battery life,

the meter will power off after 5 minutes of inactivity. This time can be changed in the Display Options

menu.

For battery installation refer to Figure 4.

1. Loosen the three battery cover screws and remove the battery cover.

Note: Do not remove the screws from the battery cover.

2. Install 4 AA alkaline or 4 AA nickel metal hydride (NiMH) batteries. Make sure that the batteries

are installed in the correct polarity.

3. Replace the battery cover.

Note: Do not over-tighten the screws.

English

7

Figure 4 Battery installation

User interface and navigation

User interface

Figure 5 Keypad description

1 LEFT key: calibrates, cancels or exits the current

menu

6 BACKLIGHT: turn off display illumination

2 RIGHT key: reads, selects, confirms or stores data 7 OPERATOR ID: associate data with an individual

3 DOWN key: scroll through menus, enter

numbers/letters or change the reading screen view

8 SAMPLE ID: associate data with a sample location

4 DATA LOG: recall or transfer stored data 9 UP key: scroll through menus, enter numbers and

letters or change the reading screen view

5 METER OPTIONS: change settings, run check

standards, view meter information

Display description

Measurement screen

The meter display shows the concentration, units, temperature, calibration status, operator ID,

sample ID, date and time (Figure 6).

8

English

Figure 6 Single screen display

1 Calibration status indicator 9 Time

2 Main measurement value and unit 10 Date

3 IntelliCAL probe type and port indicator 11 Read (OK, Select)

4 Battery status 12 Display size icon

5 Power source 13 Calibrate (Cancel, Exit)

6 Sample temperature (ºC or ºF) 14 Sample and operator identification

7 Secondary measurement unit 15 Stability or display lock indicator

8 Tertiary units (for some probes)

Dual-screen mode (HQ440d model only)

When two probes are connected to the HQ440d meter, the display can show the reading from both

probes simultaneously or show just one probe (Figure 7).

Note: For probe calibration, change the screen mode to the single screen mode.

To change the screen mode to single or dual screen, use the and keys. In dual screen mode,

the key will select the probe on the left and the key will select the probe on the right.

Figure 7 Dual-screen display

1 Probe that is connected to port on left 3 Measurement information for probe on left

2 Probe that is connected to port on right 4 Measurement information for probe on right

Navigation

The meter contains menus to change various options. Use the

and keys to highlight different

options. Push the RIGHT key to select an option. There are two ways to change options:

English

9

1. Select an option from a list: Use the and keys to select an option. If check boxes are

shown, more than one option can be selected. Push the LEFT key under Select.

Note: To deselect check boxes, push the LEFT key under Deselect.

2. Enter an option value using the arrow keys:

Push the and keys to enter or change a value.

3. Push the RIGHT key to advance to the next space.

4. Push the RIGHT key under OK to accept the value.

Startup

Turn the meter on and off

Push the key to turn on or turn off the meter. If the meter does not turn on, make sure that the AC

power supply is properly connected to an electrical outlet or that the batteries are properly installed.

Change the language

The display language is selected when the meter is powered on for the first time. The language can

also be changed from the Meter Options menu.

Access to the language menu can be restricted with the Security Options.

Additional information is available on the manufacturer's website.

1. Push the key and select Language.

2. Select a language from the list.

Note: While turning the meter on, the language can also be changed when the power key is pushed and held.

Change the date and time

The date and time can be changed from the Date & Time menu.

1. Push the key and select Date & Time.

2. Update the time and date information:

Option Description

Format Select one of the formats below for the date and time. Use the and keys to select from the

format options.

dd-mm-yyyy 24h

dd-mm-yyyy 12h

mm/dd/yyyy 24h

mm/dd/yyyy 12h

dd-mmm-yyyy 24h

dd-mmm-yyyy 12h

yyyy-mm-dd 24h

yyyy-mm-dd 12h

Date Use the and keys to enter the current date.

Time Use the and keys to enter the current time.

The current date and time will be shown on the display.

Connect a probe after the date and time setup, so that the meter is ready to take a measurement.

10

English

Connect a probe

1. Make sure that the display shows the current time and date.

Note: The time stamp for a probe is set when the probe is first connected to the meter. This time stamp makes

it possible to record the probe history and record the time when measurements are made.

2. Plug the probe into the meter (Figure 8).

3. Push and turn the locking nut to tighten.

Figure 8 Probe connection

Standard operation

About calibration

Each probe uses a different type of calibration solution. Make sure to calibrate the probes frequently

to maintain the highest level of accuracy.

Note: For step-by-step instructions, refer to the documents that are included with each probe.

The calibration icon

can indicate that:

• the calibration timer has expired

• the LDO sensor cap should be replaced

• the calibration is out of range

• the calibration results are outside acceptance criteria settings

About sample measurements

Each probe has specific preparation steps and procedures for taking sample measurements. For

step-by-step instructions, refer to the documents that are included with the probe.

About check standards

Run Check Standards verifies equipment accuracy by measuring a solution of a known value. The

meter will indicate if the Check Standard passed or failed. If the Check Standard fails, the calibration

icon

is shown until the probe is calibrated.

The meter can be set to automatically show a reminder for check standard measurement at a

specified interval with a specified acceptance criteria. The reminder, value of the check standard, and

acceptance criteria can be changed. For step-by-step instructions, refer to the documents that are

included with the probe.

English

11

Use a sample ID

The sample ID tag is used to associate measurements with a particular sample location. If assigned,

stored data will include the sample ID.

1. Push the key.

2. Select, create or delete a sample ID:

Option Description

Current ID Select an ID from a list. The current ID will be associated with sample data until a

different ID is selected.

Create a New Sample ID Enter a name for a new sample ID.

Delete Sample ID Delete an existing sample ID.

Use an operator ID

The operator ID tag associates measurements with an individual operator. All stored data will include

the operator ID.

1. Push the key.

2. Select, create or delete an operator ID:

Option Description

Current ID Select an ID from a list. The current ID will be associated with sample data until

a different ID is selected.

Create a New Operator ID Enter a name for a new operator ID (maximum 10 names can be entered).

Delete Operator ID Delete an existing operator ID.

Data management

About stored data

The following types of data are stored in the data log:

• Sample measurements: stored automatically each time a sample is measured in the Press to

Read or Interval Mode. When the continuous measurement mode is used, data is stored only

when Store is selected.

• Calibrations: stored only when Store is selected at the end of a calibration. Calibration data is also

stored in the IntelliCAL (R) probe.

• Check standard measurements: stored automatically each time a check standard is measured (in

the Press to Read or Interval Mode).

When the data log becomes full (500 data points), the oldest data point is deleted when a new data

point is added. The entire data log can be deleted to remove data that has already been sent to a

printer or PC (

key > Delete Data Log). To prevent deletion of the data log by a user, use the

Security Options menu.

12

English

View stored data

The data log contains sample, calibration and check standard data. The most recent data point in the

data log is tagged as Data Point 001.

1. Push the key.

2. Select View Data Log to view the stored data. The most recent data point is shown. The top of

the screen shows whether the data is from a sample reading, a calibration or a check standard.

Push the key to view the next most recent data point.

Option Description

Reading Log Reading Log—shows sample measurements including the time, date, operator and

sample ID. Select Details to view the associated calibration data.

Calibration Log Calibration Log—shows calibration data. Select Details to view additional information

about the calibration.

Check Standard Log Check Standard Log—shows check standard measurements. Select Details to view

the calibration data that was associated with the measurement.

View stored probe data

Make sure that a probe is connected to the meter. If two probes are connected, select the

appropriate probe when prompted.

1. To view the calibration data that is stored in a probe, push the key and select View Probe

Data. The current calibration and calibration history for the probe can be viewed.

Option Description

View Current

Calibration

The current calibration information shows the calibration details for the most recent

calibration. If the probe has not been calibrated by the user, the factory calibration

data is shown.

View Calibration

History

The calibration history shows a list of the times when the probe was calibrated.

Select a date and time to view a summary of the calibration data.

Print stored data

The meter must connect to AC power to start the USB connection. Make sure that the connection to

AC power is made before the meter is powered on.

All data can be sent to a printer. Compatible printers should support a minimum of 72 columns of

data, be capable of printing up to 500 continuous data-stream events in 1, 2 and 3 lines of text and

fully support code page 437 and code page 850.

1. Turn off the meter. Make sure that the meter is connected to AC power. Refer to Connect to AC

power on page 6.

2. Connect the printer to the meter with a USB cable type A. Refer to Figure 9.

3. Turn on the meter.

4. Push the key.

5. Select Send Data Log. Wait for the display to show “Transfer Complete” and wait for the printer to

stop printing. Disconnect the printer.

English

13

Figure 9 Connection to the printer

1 USB cable 3 AC-DC power supply for printer (optional)

2 Printer, FCC Part 15B, Class B compliant

Change the report options

Printed reports for sample data can contain 1, 2 or 3 lines of information.

Additional information is available on the manufacturer's website.

1. Push the key. Select Report Options.

2. Select Report Type and select one of the options.

Option Description

Basic report One line of data.

Advanced report Two lines of data. The first line contains the same information as in the basic report.

Total report Three lines of data. The first two lines contain the same information as in the advanced

report.

Send data to a USB storage device

N O T I C E

The transfer of a large number of data points will take some time. DO NOT disconnect the USB storage device

until the transfer is complete.

Data can be transferred to a USB storage device for storage or transfer to a computer.

1. Turn off the meter. Make sure that the meter is connected to AC power.

2. Plug the USB storage device into the meter before the meter is powered on.

14

English

3. Turn on the meter.

4. Push the key.

5. Select Send Data Log. Wait for the display to show “Transfer Complete” and for any lights on the

USB storage device to stop flashing. Then remove the USB device.

Note: If the data transfer is slow, reformat the USB storage device to use the file allocation table (FAT) format

for the next use.

Send data directly to a computer

Data can be transferred from any HQd series meter directly to a computer when the HQ40d PC

Application is installed. The data can be sent in real time during data collection, or the entire data log

can be transferred.

To download the most current version of the software, refer to the applicable product page on the

manufacturer's website.

1. Install the HQ40d PC Application on the computer.

2. Turn off the meter. Make sure that the meter is connected to AC power.

3. Connect the PC to the meter with a USB type B cable.

4. Turn on the meter.

5. Open the HQ40d PC Application on the computer. Click on the green triangle in the menu bar to

start a connection.

6. Collect the data in real time or transfer the data from the data log:

• Real time—when a data point is stored in the meter, the result is sent simultaneously to the PC

Application.

Additional information is available on the manufacturer's website.

• Data log—push the key and select Send Data Log. Wait for the display to show “Transfer

Complete.” The data is sent as a comma separated values (.csv) file.

The data is shown in the HQ40d PC Application window.

Maintenance

C A U T I O N

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the

document.

Clean the meter

The meter is designed to be maintenance-free and does not require regular cleaning for normal

operation. Exterior surfaces of the meter may be cleaned as necessary.

1. Wipe the surface of the meter with a damp cloth.

2. Use a cotton-tipped applicator to clean or dry the connectors.

Replace the batteries

W A R N I N G

Explosion hazard. Incorrect battery installation can cause the release of explosive gases. Be sure that the

batteries are of the same approved chemical type and are inserted in the correct orientation. Do not mix new and

used batteries.

For battery replacement, refer to Figure 10.

English

15

1. Loosen the three battery cover screws and remove the battery cover (Figure 10).

Note: Do not remove the screws from the battery cover.

2. Remove the batteries.

3. Install 4 AA alkaline or 4 AA nickel metal hydride (NiMH) batteries. Make sure that the batteries

are installed in the correct polarity.

4. Replace the battery cover.

Note: Do not over-tighten the screws.

Figure 10 Battery replacement

Troubleshooting

Refer to the following table for common problem messages or symptoms, possible causes and

corrective actions.

Error/Warning Description Solution

Connect a Probe Probe disconnected or

connected improperly

Tighten the locking nut on the probe connector.

Disconnect the probe and then connect the probe

again

Software not updated to

most current version

To download the most current version of the

software, refer to the applicable product page on

the manufacturer's website.

Problem with probe Connect a different IntelliCAL probe to verify if

problem is with probe or meter

16 English

Error/Warning Description Solution

Probe Not Supported Probe disconnected or

connected improperly

Tighten the locking nut on the probe connector.

Disconnect the probe and then connect the probe

again.

Software not updated to

most current version

To download the most current version of the

software, refer to the applicable product page on

the manufacturer's website.

Problem with probe Connect a different IntelliCAL probe to the meter

to verify if problem is with the meter or the probe.

HQd meter does not

support IntelliCAL probe

Contact Technical Support.

Bootloader X.X.XX.XX error Software not updated to

most current version.

To download the most current version of the

software, refer to the applicable product page on

the manufacturer's website.

0 days remaining message

(For LDO and LBOD only)

LDO or LBOD sensor cap

used for 365 days

Replace the LDO or LBOD sensor cap and

iButton

®

.

There are 0 days remaining

in the life of the LDO sensor

cap.

Replace the LDO sensor cap. Calibration will be

allowed. However, the calibration icon and

question mark will appear on the measurement

screen even if the calibration has passed.

Meter set to incorrect date

and time

1. Disconnect the probe from the meter.

2. Remove the meter batteries.

3. Install the meter batteries properly. Follow the

polarity makings.

4. Set correct date and time in the meter.

5. Connect the probe and verify that message

has been removed.

Software not updated to

most current version

To download the most current version of the

software, refer to the applicable product page on

the manufacturer's website.

Meter not configured Software error(s) If the meter starts up correctly, back up the Data

Log and Method files.

To download the most current version of the

software, refer to the applicable product page on

the manufacturer's website.

Meter will not power on or

powers on intermittently

Batteries are not installed

correctly

Examine battery orientation to make sure the

batteries follow the polarity markings. Test again.

Clean the battery terminals, then install new

batteries.

Connect AC power adapter and test again.

Software not updated to

most current version

To download the most current version of the

software, refer to the applicable product page on

the manufacturer's website.

Damaged meter Contact Technical Support.

Unable to access Full

Access Options screen

Correct password has not

been entered

Contact Technical Support.

Unable to access Full or

Operator Access Options

screen

Software not updated to

most current version

To download the most current version of the

software, refer to the applicable product page on

the manufacturer's website.

English 17

Inhaltsverzeichnis

Technische Daten auf Seite 18

Allgemeine Informationen auf Seite 18

Installation auf Seite 22

Benutzeroberfläche und Navigation auf Seite 24

Inbetriebnahme auf Seite 26

Standardbetrieb auf Seite 28

Datenmanagement auf Seite 29

Wartung auf Seite 32

Fehlersuche und -behebung auf Seite 33

Technische Daten

Änderungen vorbehalten.

Technische Daten Details

Abmessungen 17,48 x 8,59 x 23,5 cm (6.88 x 3.38 x 9.25 Zoll)

Gewicht 750 g (1.65 lb) ohne Batterien

Gerätegehäuse IP54 mit angebrachter Batteriefachabdeckung (staub- und

spritzwassergeschützt)

Spannungsversorgung (intern) Alkalibatterien oder aufladbare Nickelmetallhydrid-Akkus (NiMH) (4 St.);

Batteriestandzeit: bis 200 Stunden

Spannungsversorgung (extern) Externer Netzadapter gemäß Klasse II: 100 bis 240 VAC, Eingang: 50/60 Hz,

Ausgang: 4,5 bis 7,5 VDC (7 VA)

Schutzklasse des Messgerätes Klasse I

Lagertemperatur – 20 bis +60°C

Betriebstemperatur 5 bis 45 °C (41 bis 113 °F)

Luftfeuchtigkeit bei Betrieb maximal 90% (nicht-kondensierend)

5-poliger Eingangsstecker M12-Steckverbinder für IntelliCAL

™

-Sonden

Datenspeicher (intern) 500 Ergebnisse

Datenspeicher Automatisch bei manueller Messung und bei Intervallmessung, manuell bei

kontinuierlicher Messung.

Datenexport USB-Anschluss zum PC bzw. zu einem USB-Speichergerät (beschränkt auf die

Kapazität des Speichergerätes). Übertragen wird der gesamte Datenspeicher

oder die aktuellen Daten bei der Messung.

Anschlüsse Integrierter USB-Anschluss A (für USB 2.0-Flash-Speichergerät, Drucker,

Tastatur) und integrierter USB-Anschluss B (für PC)

Temperaturkorrektur Aus, automatisch und manuell (parameterabhängig)

Sperren der Messanzeige Kontinuierliche Messung, Intervallmessung oder manuelle Messung.

Mittelwertfunktion für LDO-Sonden.

Tastatur Anschluss einer externen PC-Tastatur über USB/DC-Adapter

Zusätzliche Informationen

Zusätzliche Informationen finden Sie auf der Website des Herstellers.

Allgemeine Informationen

Der Hersteller ist nicht verantwortlich für direkte, indirekte, versehentliche oder Folgeschäden, die

aus Fehlern oder Unterlassungen in diesem Handbuch entstanden. Der Hersteller behält sich

jederzeit und ohne vorherige Ankündigung oder Verpflichtung das Recht auf Verbesserungen an

18

Deutsch

diesem Handbuch und den hierin beschriebenen Produkten vor. Überarbeitete Ausgaben der

Bedienungsanleitung sind auf der Hersteller-Webseite erhältlich.

Sicherheitshinweise

H I N W E I S

Der Hersteller ist nicht für Schäden verantwortlich, die durch Fehlanwendung oder Missbrauch dieses Produkts

entstehen, einschließlich, aber ohne Beschränkung auf direkte, zufällige oder Folgeschäden, und lehnt jegliche

Haftung im gesetzlich zulässigen Umfang ab. Der Benutzer ist selbst dafür verantwortlich, schwerwiegende

Anwendungsrisiken zu erkennen und erforderliche Maßnahmen durchzuführen, um die Prozesse im Fall von

möglichen Gerätefehlern zu schützen.

Bitte lesen Sie dieses Handbuch komplett durch, bevor Sie dieses Gerät auspacken, aufstellen oder

bedienen. Beachten Sie alle Gefahren- und Warnhinweise. Nichtbeachtung kann zu schweren

Verletzungen des Bedieners oder Schäden am Gerät führen.

Stellen Sie sicher, dass die durch dieses Messgerät bereitgestellte Sicherheit nicht beeinträchtigt

wird. Verwenden bzw. installieren Sie das Messsystem nur wie in diesem Handbuch beschrieben.

Bedeutung von Gefahrenhinweisen

G E F A H R

Kennzeichnet eine mögliche oder drohende Gefahrensituation, die, wenn sie nicht vermieden wird, zum Tod oder

zu schweren Verletzungen führt.

W A R N U N G

Kennzeichnet eine mögliche oder drohende Gefahrensituation, die, wenn sie nicht vermieden wird, zum Tod oder

zu schweren Verletzungen führen kann.

V O R S I C H T

Kennzeichnet eine mögliche Gefahrensituation, die zu geringeren oder moderaten Verletzungen führen kann.

H I N W E I S

Kennzeichnet eine Situation, die, wenn sie nicht vermieden wird, das Gerät beschädigen kann. Informationen, die

besonders beachtet werden müssen.

Warnhinweise

Lesen Sie alle am Gerät angebrachten Aufkleber und Hinweise. Nichtbeachtung kann Verletzungen

oder Beschädigungen des Geräts zur Folge haben. Im Handbuch werden auf die am Gerät

angebrachten Symbole in Form von Warnhinweisen verwiesen.

Dieses Symbol am Gerät weist auf Betriebs- und/oder Sicherheitsinformationen im Handbuch hin.

Dieses Symbol gibt an, dass die bezeichnete Stelle heiß werden kann und deswegen ohne

entsprechende Schutzvorkehrungen nicht berührt werden sollte.

Elektrogeräte, die mit diesem Symbol gekennzeichnet sind, dürfen nicht im normalen öffentlichen

Abfallsystem entsorgt werden. Senden Sie Altgeräte an den Hersteller zurück. Dieser entsorgt die

Geräte ohne Kosten für den Benutzer.

Produktübersicht

Die Labormessgeräte der Baureihe HQd werden in Verbindung mit den IntelliCAL

™

-Digitalsonden

zur Messung verschiedener Parameter im Wasser eingesetzt. Das Messgerät erkennt automatisch

Deutsch

19

die Art der angeschlossenen Sonde. Messwertdaten können gespeichert und an einen Drucker,

einen PC oder ein USB-Speichergerät übertragen werden (siehe Abbildung 1).

Die Baureihe HQd besteht aus drei Gerätemodellen:

• HQ411d – pH/mV/ORP (Redox)

• HQ430d – mehrere Parameter, ein Sondereingang

• HQ440d – mehrere Parameter, zwei Sondeneingänge

Gemeinsame Merkmale aller Modelle

• Automatische Sonden- und Parametererkennung

• Menügesteuerte Kalibrierung

• In der Sonde gespeicherte Kalibrierungsdaten

• Sondenspezifische Verfahrenseinstellungen zur Einhaltung gesetzlicher Vorschriften und

allgemein anerkannter Arbeitsabläufe im Labor

• Sicherheitsoptionen

• Echtzeit-Datenprotokollierung über eine USB-Verbindung

• USB-Anschluss für PC/Drucker/USB-Speichergerät/Tastatur

• Bidirektionale Kommunikation mit PC-Systemen über eine virtuelle serielle Verbindung

• Proben-ID und Bediener-ID sorgen zur Rückführbarkeit der Daten

• Einstellbare automatische Abschaltung

20 Deutsch

Leht laadib ...

Hach HQ440d Basic User Manual

See käsiraamat sobib ka

Hach HQ440d Basic User Manual

teistes keeltes

Seotud paberid

Muud dokumendid