GLEDOPTO TUINSPOT Kasutusjuhend

TUINSPOT
Kaubamärk
GLEDOPTO
Mudel
TUINSPOT
Kategooria
Väravad / kontrollerid
Tüüp
Kasutusjuhend
Outdoor light
Thanks for buying our products.
In this manual we will explain the connection of wires and the connection with a ZigBee Light
Link Gateway.
These devices works with many ZigBee Light Link Gateways* like Philips Hue, Amazon Echo
Plus.
Installation:
1.Turn off the Power.
2.Plug in the Light.
3.Now you can connect it with the gateway.
Connection with Gateway:
1.Start the device searching on the ZigBee Light Link Gateway, switch on the led light,
it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset and swich
off/on the hue bridge once.
2.The Gateway found your device and you can assign it to the different
rooms/zones/groups.
3.Now you can use the device.
Reset:
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after
blinking 4 times.
within 2s
on
on
off
4 times
blink
the 5th on1sth on/off
Power 10W
166x116x32
450 850 1500 2500
550 1000 1800 2800
226.5x167x40 310.47x220x47.5 354.32x245x49.5
30W 60W 100W
Remote range 15 meters (Mesh Enabled）
AC100-240V
Aluminum,toughened glass
RGB+CCT
50,000h
-20°c ~ 60°c
Input voltage:
Material
LED color
Working temp
Life span
Size(mm)
NW(g)
GW(g)
Picture
Driver
Protection
Warranty
Mean Well Mean Well Mean Well
IP65 IP65 IP65 IP65
3years 3years 3years 3years
Customized
LED Flood Light Technical data
LED Garden lamp Technical data
Picture Power Color Size mm
Input
voltage GW(g) Protection Warranty
AC100-240V
AC100-240V
9W
12W
RGB+CCT
RGB+CCT
IP65
IP65
3years
3years
105*400 1250
120*300 1000
  • Page 1 1
  • Page 2 2

GLEDOPTO TUINSPOT Kasutusjuhend

TUINSPOT
Kaubamärk
GLEDOPTO
Mudel
TUINSPOT
Kategooria
Väravad / kontrollerid
Tüüp
Kasutusjuhend
Laadige alla PDF
aruanne

teistes keeltes

Muud dokumendid