Husqvarna 215iHD45 Kasutusjuhend

215iHD45

EN Operator's manual 4-18

SV Bruksanvisning 19-32

DA Brugsanvisning 33-46

NO Bruksanvisning 47-60

FI Käyttöohje 61-74

DE Bedienungsanweisung 75-90

FR Manuel d'utilisation 91-105

NL Gebruiksaanwĳzing 106-120

IT Manuale dell'operatore 121-135

ES Manual de usuario 136-150

PT Manual do utilizador 151-165

ET Kasutusjuhend 166-179

LT Operatoriaus vadovas 180-193

LV Lietošanas pamācība 194-207

CS Návod k použití 208-221

SK Návod na obsluhu 222-235

PL Instrukcja obsługi 236-250

HU Használati utasítás 251-265

HR Priručnik za korištenje 266-279

SL Navodila za uporabo 280-293

RO Instrucţiuni de utilizare 294-308

SR Priručnik za rukovaoca 309-322

RU Руководство по эксплуатации 323-339

BG Ръководство за експлоатация 340-355

UK Посібник користувача 356-372

EL Οδηγίες χρήσης 373-388

TR Kullanım kılavuzu 389-402

JA 取扱説明書 403-416

KO 사용자 설명서 417-429

ZH 操作手册 430-441

6

10

19

4

5

93

2

7

815

18

1

1617

12

11

20

21

18

14

15

13

14

15

13

1

2 3 4 5 6 7

8 9 10 11 12 13

14

15

16

17

18

19

20

21

22

A

B

C

23

24

25

A

26

27

D

A

B

C

28

29

30

31

32

33

34

35

36

Contents

Introduction..................................................................... 4

Safety..............................................................................5

Assembly...................................................................... 10

Operation...................................................................... 11

Maintenance................................................................. 12

Troubleshooting............................................................ 13

Transportation, storage and disposal........................... 14

Technical data.............................................................. 15

Declaration of Conformity............................................. 17

Introduction

Product description

Husqvarna 215iHD45 is a battery hedge trimmer with an

electrical motor.

Work is constantly in progress to increase your safety

and efficiency during operation. Speak to your servicing

dealer for more information.

Intended use

Use the product to cut branches and twigs. Do not use

the product for other tasks.

Product overview

(Fig. 1)

1. Operator's manual

2. Rear handle

3. Front handle trigger

4. Front handle

5. Cutter

6. Transport guard

7. Power trigger

8. Control panel

9. Handguard

10. Battery

11. Battery charger 40-C80

12. Connector

13. Battery indicator button

14. Battery status

15. Warning indicator

16. SavE button

17. Start/stop button

18. Power on and warning indicator

19. Battery release buttons

20. Battery Charger QC80

21. Power cord

Symbols on the product

(Fig. 2) WARNING: This product can be

dangerous and cause serious injury or

death to the operator or others. Be careful

and use the product correctly.

(Fig. 3) Read the operator’s manual carefully

and make sure that you understand the

instructions before you use the product.

(Fig. 4) Wear eye protection.

(Fig. 5) The product agrees with the applicable

EC directives.

(Fig. 6) The product or package of the product

is not domestic waste. Recycle it at

a recycling station for electrical and

electronic equipment.

(Fig. 7) Do not expose to rain.

(Fig. 8) Direct current.

(Fig. 9) Noise emission to the environment label

as per EU (also including New South

Wales legislation) and UK directives and

regulations. Noise emission data can be

found on the machine label and in the

Technical data chapter.

(Fig. 10) This product conforms to the applicable

UK regulations.

(Fig. 11) Warning: Keep hands away from the

blade.

yyyywwxxxxx The rating plate shows the serial num-

ber. yyyy is the production year, ww is

the production week.

Note: Other symbols/decals on the product refer to

special certification requirements for certain markets.

41710 - 006 - 11.11.2022

Symbols on the battery and/or on the

battery charger

(Fig. 15)

Recycle this product at a recy-

cling station for electrical and

electronic equipment. (Applies

to Europe only)

(Fig. 12) Fail-safe transformer.

(Fig. 13) Use and keep the battery charger indoors

only.

(Fig. 14) Double insulation.

Safety

Safety definitions

Warnings, cautions and notes are used to point out

specially important parts of the manual.

WARNING: Used if there is a risk of

injury or death for the operator or bystanders

if the instructions in the manual are not

obeyed.

CAUTION: Used if there is a risk of

damage to the product, other materials or

the adjacent area if the instructions in the

manual are not obeyed.

Note: Used to give more information that is necessary

in a given situation.

General power tool safety warnings

WARNING: Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

Note: Save all warnings and instructions for future

reference. The term "power tool" in the warnings refers

to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

Work area safety

•Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

•Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

•Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

Electrical safety

•Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce

risk of electric shock.

•Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

•Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

•Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk

of electric shock.

•When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

•If operating a power tool in a damp location is

unavoidable, use a residual circuit interrupter (RCD)

protected supply. Use of a RCD reduces the risk of

electric shock

WARNING: Do not pressure wash the

machine, as water can enter the electrical

system or the motor and cause damage to

the machine or short circuit.

Personal safety

•Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result

in serious personal injury.

•Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

•Prevent unintentional starting. Ensure the switch is

in the OFF-position before connecting to a power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

•Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached

1710 - 006 - 11.11.2022 5

to a rotating part of the power tool may result in

personal injury.

•Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

•Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

•If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

•Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

• The vibration emission during actual use of the

power tool can differ from the declared total value

depending on the ways in which the tool is used.

Operators should identify safety measures to protect

themselves that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger).

Power tool use and care

•Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it

was designed.

•Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

•Disconnect the plug from the power source and/or

remove the battery pack, if detachable, from the

power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the

power tool accidentally.

•Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

•Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool´s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

•Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

•Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

•Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

Battery tool use and care

•Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

•Use products only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

•When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

•Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritations or burns.

•Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behavior resulting in fire, explosion or

risk of injury.

•Do not expose a battery pack or tool to fire

or excessive temperature. Exposure to fire or

temperature above 130 °C / 265 °F may cause

explosion.

•Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

Service

•Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is

maintained.

•Never service damaged battery packs. Service of

battery packs should only be performed by the

manufacturer or authorized service providers.

Hedge trimmer safety warnings - Personal

safety

•Use both hands when operating the hedge trimmer.

Using one hand could cause loss of control and

result in serious personal injury.

•Keep all parts of the body away from the blade. Do

not remove cut material or hold material to be cut

when blades are moving. Blades continue to move

after the switch is turned off. A moment of inattention

61710 - 006 - 11.11.2022

while operating the hedge trimmer may result in

serious personal injury.

•Carry the hedge trimmer by the handle with the

blade stopped and taking care not to operate any

power switch. Proper carrying of the hedge trimmer

will decrease the risk of inadvertent starting and

resultant personal injury from the blades.

•When transporting or storing the hedge trimmer,

always fit the blade cover. Proper handling of the

hedge trimmer will decrease the risk of personal

injury from the blades.

•When clearing jammed material or servicing the

unit, make sure all power switches are off and

the battery pack is removed or disconnected.

Unexpected actuation of the hedge trimmer while

clearing jammed material or servicing may result in

serious personal injury.

•Hold the hedge trimmer by insulated gripping

surfaces only, because the blade may contact

hidden wiring. Blades contacting a "live" wire may

make exposed metal parts of the hedge trimmer

"live" and could give the operator an electric shock.

•Keep all power cords and cables away from cutting

area. Power cords or cables may be hidden in

hedges or bushes and can be accidentally cut by the

blade.

•Do not use the hedge trimmer in bad weather

conditions, especially when there is a risk of

lightning. This decreases the risk of being struck by

lightning.

•DANGER -Keep hands away from blade. Contact

with blade will result in serious personal injury.

General safety instructions

WARNING: Read the warning

instructions that follow before you use the

product.

• Remove the battery to prevent the product from

being started by accident.

• This product is a dangerous tool if you are not

careful or if you use the product incorrectly. This

product can cause serious injury or death to the

operator or others.

• Do not use the product if it is changed from its initial

specification. Do not change a part of the product

without approval from the manufacturer. Only use

parts that are approved by the manufacturer.

Injury or death is a possible result of incorrect

maintenance.

• Do a check of the product before use. See

To

do before you start the product on page 11

. Do

not use a defective product. Do the safety checks,

maintenance and service instructions described in

this manual.

• Children should be supervised to ensure that they

do not play with the product. Never allow children or

other persons not trained in the use of the product

and/or the battery to use or service it. Local laws

may regulate the age of the user.

• Keep the product in a locked area to prevent access

for children or persons that are not approved.

• Store the product out of reach of children.

• Under no circumstances may the design of the

product be modified without the permission of the

manufacturer. Always use original accessories. Non-

authorized modifications and/or accessories can

result in serious personal injury or the death of the

operator and others.

Note: National or Local laws can regulate the use.

Comply to given regulations.

Safety instructions for operation

WARNING: Read the warning

instructions that follow before you use the

product.

• If you encounter a situation where you are uncertain

how to proceed you should ask an expert. Contact

your dealer or your service workshop. Avoid all

usage which you consider to be beyond your

capability.

• Never use the product if you are fatigued, while

under the influence of alcohol or drugs, medication

or anything that could affect your vision, alertness,

coordination or judgment.

• Working in bad weather is tiring and often brings

added risk. Due to the added risk, it is not

recommended to use the machine in very bad

weather, for instance in dense fog, heavy rain,

strong winds, intense cold, risk of lightning, etc.

• Faulty blades can increase the risk of accidents.

• Do not allow children to use or be in the vicinity

of the product. Since the product is easy to start,

children may be able to start it if they are not kept

under full surveillance. This can mean a risk of

serious personal injury. Disconnect the battery when

the product is not under close supervision.

• Ensure that no people or animals come closer than

15 metres while you work. When several operators

are working in the same area the safety distance

should be at least 15 metres. Otherwise there is

a risk of serious personal injury. Stop the product

immediately if anyone approaches. Never swing the

product around without first checking behind you to

make sure that no one is within the safety zone.

• Ensure that people, animals or other things can

not affect your control of the product or that they

do not come in contact with the cutting attachment

or loose objects that are thrown out by the cutting

attachment. However, do not use the product unless

you are able to call for help in the event of an

accident.

• Always inspect the working area. Remove all loose

objects such as stones, broken glass, nails, steel

1710 - 006 - 11.11.2022 7

wire, string, etc., that could be thrown out or become

wrapped around the cutting attachment.

• Make sure that you can move and stand safely.

Check the area around you for possible obstacles

(roots, rocks, branches, ditches, etcetera) in case

you have to move suddenly. Take great care when

you work on sloping ground.

• Keep a good balance and a firm foothold at all times.

Do not overreach.

• Deactivate the product before you move to another

area. Attach the transport guard when the product is

not in use.

• Never put the product down unless you have

deactivated it and removed the battery. Do not leave

the product unsupervised when it is switched on.

• Make sure that no clothes or parts of the body

come in contact with the cutting attachment when

the product is activated.

• If anything jams in the blades while you operate

the product, stop and deactivate the product. Make

sure that the cutting attachment stops completely.

Remove the battery before you clean, inspect or

repair the product and/or the blades.

• Keep your hands and feet away from the cutting

attachment until it has stopped completely when the

product is deactivated.

• Watch out for stumps of branches that can be thrown

out when you cut. Do not cut to close to the ground

where stones and other objects can be thrown out.

• Watch out for thrown objects. Always wear

approved eye protection. Never lean over the cutting

attachment guard. Stones, rubbish, etcetera, can be

thrown up into the eyes which can cause blindness

or serious injury.

• Listen out for warning signals or shouts when

you wear hearing protection. Always remove your

hearing protection as soon as the product stops.

• Never work from a ladder, stool or any other raised

position that is not fully secured.

• Use both hands when you hold the product. Hold the

product at the side of your body.

(Fig. 16)

Personal protective equipment

WARNING: Read the warning

instructions that follow before you use the

product.

• Use approved personal protective equipment when

you use the product. Personal protective equipment

cannot fully prevent injury but it can decrease the

degree of injury. Speak to your dealer for more

information.

• Use a protective helmet where there is a risk of

falling objects.

(Fig. 17)

• Use approved hearing protection. Long-term

exposure to noise can result in permanent damage

to the hearing.

(Fig. 18)

• Use approved eye protection. If you use a visor,

you must also use approved protective goggles.

Approved protective goggles must comply with the

ANSI Z87.1 standard in the USA or EN 166 in EU

countries.

(Fig. 19)

• Use protective gloves during operation and

maintenance.

(Fig. 20)

• Use protective boots or shoes with non-slip soles.

(Fig. 21)

• Use clothing made of a strong fabric. Your clothing

must be close-fitting but not limit your movements.

Use long pants and put your hair behind your

shoulders. Do not use jewelry and open shoes.

• Keep first aid equipment near.

(Fig. 22)

Safety devices on the product

WARNING: Read the warning

instructions that follow before you use the

product.

In this section the product’s safety features, its purpose

and how checks and maintenance should be carried

out to ensure that it operates correctly. See instructions

under the heading

Product overview on page 4

to find

where these parts are located on your product.

The life span of the product can be reduced and the risk

of accidents can increase if product maintenance is not

carried out correctly and if service and/or repairs are not

carried out professionally. If you need further information

please contact your nearest servicing dealer.

WARNING: Never use a product with

defective safety components. The product's

safety equipment must be inspected and

maintained as described in this section.

If your product fails any of these checks,

contact your service agent to get it repaired.

CAUTION: All servicing and repair work

on the machine requires special training.

This is especially true of the machine′s

safety equipment. If your machine fails

any of the checks described below you

must contact your service agent. When

you buy any of our products we guarantee

the availability of professional repairs and

service. If the retailer who sells your

machine is not a servicing dealer, ask him

81710 - 006 - 11.11.2022

for the address of your nearest service

agent.

To do a check of the keypad

1. Press and hold the start/stop button (A). (Fig. 23)

a) The product is on when the LED (B) is on.

b) The product is off when the LED (B) is off.

2. Refer to

Keypad on page 13

if the warning indicator

(C) comes on or flashes.

To do a check of the front handle trigger

The front handle trigger prevents accidental start. When

you push the front handle trigger, it releases the power

trigger. When you release the handle, the power trigger

and the front handle trigger move back to their initial

positions.

1. Make sure that the power trigger and the front

handle trigger moves freely and that the return

spring works correctly.

2. Start the product.

3. Push the front handle trigger.



(Fig. 24)



4. Push the power trigger. (Fig. 25)

5. Release the front handle trigger and make sure that

the cutting attachment stops fully.

To do a check of the hand guard

The hand guard prevents hands from accidental contact

with the blades.

1. Stop the product.

2. Remove the battery.

3. Check that the hand guard is attached correctly.

4. Examine the hand guard for damages.

To do a check of the blades and blade guards

The longer parts of the blades (A) operate as blade

guards.

1. Stop the product.

2. Remove the battery.

3. Put on gloves.

4. Make sure that the blades and blade guards are

not damaged or bent. Replace the blades and blade

guards if they are damaged or bent. (Fig. 26)

Battery safety

WARNING: Read the warning

instructions that follow before you use the

product.

• Only use the BLi series and 40-B series battery. For

details, refer to

Technical data on page 15

. The

battery is software encrypted.

• Use the BLi series and 40-B series battery that

is rechargable as a power supply for the related

Husqvarna products only. To prevent injury, do not

use the battery as a power supply for other devices.

• Risk of electrical shock. Do not connect the battery

terminals to keys, coins, screws or other metal. This

can cause a short circuit of the battery.

• Do not use non-rechargeable batteries.

• Do not put objects into the air slots of the battery.

• Keep the battery away from sunlight, heat or open

flame. The battery can cause burns and/or chemical

burns.

• Keep the battery away from rain and wet conditions.

• Keep the battery away from microwaves and high

pressure.

• Do not try to disassemble or break the battery.

• If the battery leaks, do not let the liquid touch your

body or eyes. If you have touched the liquid, clean

the area with a large quantity of water and soap, and

get medical aid. If you get liquid in your eyes, do not

rub but flush with water for a minimum of 15 minutes

and get medical aid.

• Use the battery in temperatures between -10 °C (14

°F) and 40 °C (114 °F).

• Do not clean the battery or the battery charger with

water. Refer to

To clean the product, the battery and

the battery charger on page 13

.

• Do not use a defective or damaged battery.

• Keep batteries in storage away from metal objects

such as nails, screws or jewelry.

• Keep the battery away from children.

Battery charger safety

WARNING: Read the warning

instructions that follow before you use the

product.

• Risk of electrical shock or short circuit if the safety

instructions are not obeyed.

• Do not use other battery chargers than the one

supplied for your product. Only use QC80 and 40-

C80 chargers when you charge BLi series and 40-B

series replacement batteries.

• Do not try to disassemble the battery charger.

• Do not use a defective or damaged battery charger.

• Do not lift the battery charger by the power cord. To

disconnect the battery charger from a mains socket,

pull out the plug. Do not pull the power cord.

• Keep all cables and extension leads away from

water, oil and sharp edges. Make sure that the cable

is not caught between objects, for example, doors,

fences or equivalent.

• Do not use the battery charger near flammable

materials or materials that can cause corrosion.

1710 - 006 - 11.11.2022 9

Make sure that the battery charger is not covered.

Pull out the plug to the battery charger if there is

smoke or fire.

• Only charge the battery indoors in a location with

good airflow and away from sunlight. Do not charge

the battery outdoors. Do not charge the battery in

wet conditions.

• Only use the battery charger where the temperature

is between 5 °C (41 °F) and 40 °C (104 °F). Use the

charger in an environment which has a good airflow,

dry and free from dust.

• Do not put objects into the cooling slots of the

battery charger.

• Do not connect the battery charger terminals to

metal objects as this can short circuit the battery

charger.

• Use approved mains sockets that are not damaged.

Make sure that the cord of the battery charger is not

damaged. If extension cables are used, make sure

that the extension cables are not damaged.

• Do not charge non-rechargeable batteries in the

battery chargers.

Safety instructions for maintenance

WARNING: Read the warning

instructions that follow before you do

maintenance on the product.

• Remove the battery before you do maintenance,

other checks or assemble the product.

• The operator must only do the maintenance and

servicing shown in this operator's manual. Turn to

your servicing dealer for maintenance and servicing

of a larger extension.

• Do not clean the battery or the battery charger with

water. Strong detergent can cause damage to the

plastic.

• If you do not do maintenance, it decreases the

life cycle of the product and increases the risk of

accidents.

• Special training is necessary for all servicing and

repair work, especially for the safety devices on the

product. If not all checks in this operator's manual

are approved after you have done maintenance, turn

to your servicing dealer. We guarantee that there are

professional repairs and servicing available for your

product.

• Only use original spare parts.

Assembly

Introduction

This section describes how to assemble and adjust the

product.

WARNING: Before you assemble the

product, read the safety chapter and the

assembly instructions.

To connect the battery to the product

WARNING: Only use Husqvarna

original batteries in the product.

1. Fully charge the battery.

2. Push the battery into the battery holder of the

product. The battery locks into position when you

hear a click. (Fig. 27)

CAUTION: If the battery does not

move easily into the battery holder, the

battery is not installed correctly. This can

cause damage to the product.

To install the battery charger (40-C80)

on the wall

CAUTION: Do not use an electric

screwdriver to install the battery charger to

the wall. An electric screwdriver can cause

damage to the battery charger.

1. Install the battery charger on the wall with the 2

screws (B). Use wall plugs (A) if it is necessary. (Fig.

28)

2. Install the 2 screw hole plugs (C).

3. Connect the power cord to the battery charger and a

mains socket.

10 1710 - 006 - 11.11.2022

Operation

Introduction

WARNING: Read and understand the

safety chapter before you use the product.

Battery

WARNING: Read and understand the

safety chapter before you use the battery.

Read and understand the operator's manual

for the battery and the battery charger.

Keep the battery and the battery charger in the correct

ambient temperatures.

Ambient temperature

Operation of the battery 5 °C-40 °C / 41 °F-104 °F

Charging of the battery 5 °C-40 °C / 41 °F-104 °F

Battery status

The display shows the state of charge and if there are

problems with the battery.

(Fig. 29)

LED indicator Battery status (state of charge)

BLi10 40-B70

4 LED lights are on N/A The battery is 76% - 100% charg-

ed.

3 LED lights are on The battery is 76% - 100% charged. The battery is 51% - 75% charged.

2 LED lights are on The battery is 51% - 75% charged. The battery is 26% - 50% charged.

1 LED light is on The battery is 26% - 50% charged. The battery is 6% - 25% charged.

1 LED light flashes The battery is 0% - 25% charged. The battery is 0% - 5% charged.

To charge the battery

Charge the battery if it is the first time that you use it. A

new battery is only 30% charged.

CAUTION: Connect the battery charger

to a power outlet with the voltage and

frequency that is specified on the rating

plate.

The battery does not charge if the battery temperature is

more than 50 °C/122 °F.

1. Connect the power cord to the battery charger.

2. Connect the battery charger to a grounded power

outlet. The charging LED flashes one time. (Fig. 30)

3. Connect the battery to the battery charger. The

charging LED comes on. Charge the battery for

maximum 24 hours. (Fig. 31)

4. Push the battery indicator button, if all the LED

indicators come on, the battery is fully charged.

5. Pull the power plug to disconnect the battery charger

from the power outlet. Do not pull the power cord.

6. Remove the battery from the battery charger.

To do before you start the product

1. Examine the work area. Remove objects that can be

thrown out.

2. Examine the cutting attachment. Make sure that the

blades are sharp, and have no cracks and damages.

3. Make sure that the product works correctly. Examine

that all nuts and screws are tight.

4. Make sure that the handle and safety devices are

not damaged and are attached correctly. Do not

operate a product with missing parts or is changed

from its initial specification. Use protective gloves

when it is necessary.

5. Make sure that the covers are not damaged and are

attached correctly, before you operate the product.

To start the product

1. Push the start/stop button until the green LED comes

on. (Fig. 32)

2. Push the front handle trigger on the front handle.

(Fig. 33)

3. Push the power trigger. (Fig. 25)

1710 - 006 - 11.11.2022 11

To operate the product

1. Start near the ground and move the product up

along the hedge when you cut the sides. Make sure

that the body of the product does not touch the

hedge. (Fig. 34)

WARNING: Make sure that the

front of the cutting equipment does not

touch the ground.

2. Hold the product near your body for a stable work

position.

3. Be careful and operate the product slowly.

To use the SavE function

This product has a power saving function, SavE.

Note: The SavE function does not decrease the

cutting power of the product.

1. Push the SavE button on the keypad.

2. Make sure that the green LED comes on.

3. Push the SavE button again to disconnect the

function. The green LED goes off. (Fig. 35)

Automatic shutdown function

The product has a shutdown function that stops the

product if the product is not used. The green LED for

start/stop indication goes off and the product stops after

180 seconds.

To stop the product

1. Release the power trigger and the front handle

trigger.

2. Push the start/stop button until the green LED goes

off.

3. Push the release buttons on the battery and remove

the battery. (Fig. 36)

Maintenance

Introduction

WARNING: Read and understand the

safety chapter before you do maintenance

work on the product.

WARNING: Remove the battery before

you do maintenance on the product.

Maintenance schedule

The following is a list of the maintenance steps that you

must do on the product.

Maintenance Before

use Weekly Monthly

Clean the external parts of the product. X

Examine that the start and stop switch works correctly and is not damaged. X

Make sure that the power trigger and the front handle trigger function correctly

from a safety point of view. X

Make sure that all controls work and are not damaged. X

Make sure that the cutter blade and cutter guard have no cracks and that they

are not damaged. Replace the cutter blade or the cutter guard if they have

cracks or if they have been exposed to impact.

X

Replace the cutter blade if it is bent or damaged. X

Make sure that the hand guard is not damaged. Replace the guard if it is dam-

aged. X

Make sure that the screws and nuts are tight. X

Make sure that the battery is not damaged. X

Make sure that the battery is charged. X

12 1710 - 006 - 11.11.2022

Maintenance Before

use Weekly Monthly

Make sure that the battery charger is not damaged. X

Make sure that the screws that hold the cutter blades together are correctly

tightened. X

Do a check of the connections between the battery and the product. Do a check

of the connection between the battery and the battery charger. X

To examine the battery and the battery

charger

1. Examine the battery for damages, for example

cracks.

2. Examine the battery charger for damages, for

example cracks.

3. Make sure that the connection cord of the battery

charger is not damaged and that there are no cracks

in it.

To clean the product, the battery and

the battery charger

1. Clean the product with a dry cloth after use.

2. Clean the battery and battery charger with a dry

cloth. Keep the battery guide tracks clean.

3. Make sure that the terminals on the battery and the

battery charger are clean before the battery is put in

the battery charger or the product.

To examine the blade

1. Clean the blade from unwanted materials with an

anti corrosion cleaning agent before and after you

use the product.

2. Examine the edges of the blade for damages and

deformation.

3. Use a file to remove burrs on the blade.

4. Make sure that the blades move freely.

To clean and lubricate the blades

1. Clean the blades from unwanted materials before

and after you use the product.

2. Lubricate the blades before long periods of storage.

Note: Speak to your servicing dealer for more

information about recommended cleaning agents and

lubricants.

To lubricate the gear

Apply grease to the gear housing if the gear has been

disassembled by an approved servicing dealer.

• Use Husqvarna special grease. Speak to your

servicing dealer for more information about

recommended grease.

• Only use a small quantity of a special high quality

grease.

CAUTION: Do not fill the gear

housing fully.

Troubleshooting

Keypad

LED screen Possible faults Possible solutions

The error LED flashes. Overload The cutting attachment cannot move

freely. Release the cutting attach-

ment.

Temperature deviation Let the product cool down.

The product does not start. Push the power trigger and press the

start button at the same time.

Release the power trigger and stop

the product.

The error LED comes on with red

light.

It is necessary to do servicing on the

product

Speak to your service dealer.

1710 - 006 - 11.11.2022 13

Battery

LED display Possible faults Possible action

The green LED flashes. Low battery voltage. Charge the battery.

The error LED flashes. Temperature deviation. Use the battery in temperatures between

-10°C (14°F) and 40°C (104°F).

Too much voltage. Make sure that the mains voltage aligns with

the voltage stated on the rating plate of the

product.

Remove the battery from the battery charger.

The error LED is on. Cell difference is too much (1V). Speak to your servicing dealer.

Battery charger

Problem Possible faults Possible solution

The charging LED is red. Permanent battery charger error. Speak to your dealer.

The charging LED flashes green. Temperature deviation, the battery is

too cold or too hot to use or charge.

Let the battery cool down or warm it

up. When the battery has the correct

temperature, it can be used or charg-

ed again. Use the battery charger in

ambient temperatures between 5 °C

(41 °F) and 40 °C (104 °F).

The charging LED flashes red. Faulty battery. Speak to your dealer.

Transportation, storage and disposal

Transportation and storage

• The supplied Li-ion batteries obey the Dangerous

Goods Legislation requirements.

• Obey the special requirement on package and labels

for commercial transportation, including by third

parties and forwarding agents.

• Speak to a person with special training in dangerous

material before you send the product. Obey all

applicable national regulations.

• Use tape on open contacts when you put the battery

in a package. Put the battery in the package tightly

to prevent movement.

• Remove the battery for storage or transportation.

• Put the battery and the battery charger in a space

that is dry and free from moisture and frost.

• Do not keep the battery in an area where static

electricity can occur. Do not keep the battery in a

metal box.

• Put the battery in storage where the temperature is

between 5°C/41°F and 25°C/77°F and away from

open sunlight.

• Put the battery charger in storage where the

temperature is between 5 °C/41 °F and 45°C/113°F

and away from open sunlight.

• Use the battery charger only when the surrounding

temperature is between 5°C/41°F and 40°C/104°F.

• Charge the battery 30% to 50% before you put it in

storage for long periods.

• Put the battery charger in storage in a space that is

closed and dry.

• Keep the battery away from the battery charger

during storage. Do not let children and other not

approved persons to touch the equipment. Keep the

equipment in a space that you can lock.

• Clean the product and do a full servicing before you

put the product in storage for a long time.

14 1710 - 006 - 11.11.2022

• Use the transportation guard on the product to

prevent injuries or damage on the product during

transportation and storage.

• Attach the product safely during transportation.

Disposal of the battery, battery charger

and product

Symbols on the product or the package of the product

means that the product is not domestic waste. Recycle

it at a recycling station for electrical and electronic

equipment. This helps to prevent damage to the

environment and to persons.

Get in touch with your local authorities, domestic waste

service or your dealer for more information about how to

recycle your product.

Technical data

215iHD45

Motor

Motor type BLDC

Weight

Weight without battery, kg 3.2

Cutter

Type Double sided

Blade length, mm 450

Blade speed, cuts/min (with SavE mode) 2400

Blade speed, cuts/min (without SavE mode) 3000

Noise emissions 1

Sound power level, measured dB(A) 87

Sound power level, guaranteed LWA 90

Sound levels

Sound pressure level at the operator's ear, measured according to EN 62841-4-2,

dB(A)

79

Vibration levels 2

Vibration levels (ah), front/rear, m/s22.1/1.7

1Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive

2000/14/EC. The difference between guaranteed and measured sound power is that guaranteed sound power

also includes dispersion in the measurement result and the variations between different products of the same

model refer to Directive 2000/14/EC.

2Reported date for vibration level has a typical statistical dispersion (standard deviation) of 1.5 m/s2.

The declared vibration total value has been measured in accordance with a standrad test method and may be

used for comparing on tool with another.

The declared vibration total value may also be used in a preliminary assesment of exposure.

1710 - 006 - 11.11.2022 15

Approved batteries for the product

Battery BLi10 40-B70

Type Lithium-ion Lithium-ion

Battery capacity, Ah Refer to battery rating decal Refer to battery rating decal

Nominal voltage, V 36 36.5 36

Weight, kg 0.7 0.7 0.8

Approved battery chargers for the product

Battery charger QC80 40-C80

Mains voltage, V 100-240 100-240

Frequency, Hz 50-60 50-60

Power, W 100 72

Output Voltage, V d.c./ Amps, A 36/2 43/1.6

16 1710 - 006 - 11.11.2022

Declaration of Conformity

EU Declaration of conformity

We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:

+46-36-146500, declare on our sole responsibility that

the product:

Description Battery hedge trimmer

Brand Husqvarna

Type / Model 215iHD45

Identification Serial numbers dating from 2022 and onwards

complies fully with the following EU directives and

regulations:

Directive/ Regulation Description

2006/42/EC "relating to machinery"

2014/30/EU ”relating to electromagnetic compability”

2000/14/EC "relating to the noise emissions in the environment"

2011/65/EU “on the restriction of the use of certain hazardous substances in electrical and electronic

equipment ”

and that the following standards and/or technical

specifications are applied: EN 62841-4-2:2019,

EN 62841-1:2015, EN 55014-1:2017+A11, EN

55014-2:2015, EN IEC63000:2018.

For information relating to noise emission, refer to

Technical data on page 15

.

Huskvarna, 2022-10-31

Claes Losdal, R&D Manager, Husqvarna AB

Responsible for technical documentation

1710 - 006 - 11.11.2022 17

UK Declaration of Conformity

We, Husqvarna AB, SE-561 82 Huskvarna, Sweden,

declare on our sole responsibility that the represented

product:

Description Hedge Trimmer

Brand Husqvarna

Model 215iHD45

Batch Serial numbers dating from 2022 and onwards

complies fully with the following UK regulations:

Description

"The Supply of Machinery (Safety) Regulations 2008"

"Electromagnetic Compatibility Regulations 2016"

The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, Schedule 8

"The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations

2012”

and that the following standards and/or technical

specifications are applied: EN 62841-4-2:2019,

EN 62841-1:2015, EN 55014-1:2017+A11, EN

55014-2:2015, EN IEC63000:2018.

For information relating to noise emissions, refer to

Technical data on page 15

.

Huskvarna, 2022-10-31

Claes Losdal, R&D Manager, Husqvarna AB

Responsible for technical documentation

UK Importer:

Husqvarna UK Ltd

Preston Road, Co. Durham

DL5 6UP

18 1710 - 006 - 11.11.2022

Innehåll

Introduktion................................................................... 19

Säkerhet....................................................................... 20

Montering......................................................................25

Drift............................................................................... 26

Underhåll...................................................................... 27

Felsökning.................................................................... 28

Transport, förvaring och kassering............................... 29

Tekniska data............................................................... 30

Försäkran om överensstämmelse................................ 32

Introduktion

Produktbeskrivning

Husqvarna 215iHD45 är en batteridriven häcksax med

elmotor.

Arbetet med att öka din säkerhet och effektivitet

under användning pågår ständigt. Prata med en

serviceverkstad för mer information.

Avsedd användning

Använd produkten för att klippa grenar och kvistar.

Använd inte produkten till annat.

Produktöversikt

(Fig. 1)

1. Bruksanvisning

2. Bakre handtag

3. Brytaren på främre handtaget

4. Främre handtag

5. Kniv

6. Transportskydd

7. Gasreglage

8. Styrkonsol

9. Handskydd

10. Batteri

11. Batteriladdare 40-C80

12. Kopplingsstycke

13. Knappen Batterinivåindikator

14. Batteristatus

15. Varningsindikator

16. Knappen SavE

17. Start-/stoppknapp

18. Ström- och varningsindikator

19. Frigöringsknappar för batteri

20. Batteriladdare QC80

21. Strömkabel

Symboler på produkten

(Fig. 2) VARNING! Den här produkten kan vara

farlig och kan orsaka allvarlig eller

livshotande skada för användaren och

andra. Var försiktig och använd produkten

på rätt sätt.

(Fig. 3) Läs igenom bruksanvisningen noggrant

och se till att du förstår instruktionerna

innan du använder produkten.

(Fig. 4) Använd ögonskydd.

(Fig. 5) Produkten överensstämmer med gällande

EG-direktiv.

(Fig. 6) Produkten eller dess förpackning är

inte hushållsavfall. Återvinn den vid

en återvinningsstation för elektrisk och

elektronisk utrustning.

(Fig. 7) Utsätt inte för regn.

(Fig. 8) Likström.

(Fig. 9) Miljömärkning för emission av buller

enligt EU- (inklusive lagstiftning för

New South Wales) och brittiska direktiv

och bestämmelser. Information om

bulleremission finns på maskinens etikett

och i avsnittet Tekniska data.

(Fig. 10) Denna produkt överensstämmer med

gällande brittiska direktiv.

(Fig. 11) Varning: Håll händerna borta från klingan.

ååååvvxxxxx Typskylten visar serienumret. yyyy

är produktionsåret och ww är produk-

tionsveckan.

Notera: Övriga på produkten angivna symboler/

dekaler avser specifika krav för certifieringar på vissa

marknader.

1710 - 006 - 11.11.2022 19

Symboler på batteriet och/eller på

batteriladdaren

(Fig. 15)

Återvinn produkten vid en åter-

vinningsstation för elektrisk och

elektronisk utrustning. (Gäller

endast Europa)

(Fig. 12) Transformator med automatisk

säkerhetsanordning.

(Fig. 13) Använd och förvara endast

batteriladdaren inomhus.

(Fig. 14) Dubbelisolerad.

Säkerhet

Säkerhetsdefinitioner

Varningar, försiktighetsåtgärder och anmärkningar

används för att betona speciellt viktiga delar i

bruksanvisningen.

VARNING: Används om det finns risk

för skador eller dödsfall för användaren

eller kringstående om anvisningarna i

bruksanvisningen inte följs.

OBSERVERA: Används om det

finns risk för skada på produkten, annat

material eller det angränsande området om

anvisningarna i bruksanvisningen inte följs.

Notera: Används för att ge mer information som är

nödvändig i en viss situation.

Allmänna säkerhetsvarningar för

elverktyg

VARNING: Läs igenom alla

säkerhetsinstruktioner och varningar. Om du

inte följer varningarna och instruktionerna

kan det leda till elektriska stötar, brand och/

eller allvarliga skador.

Notera: Spara alla varningar och instruktioner som

referens. I varningarna syftar termen ”elverktyg” på ett

verktyg som antingen är anslutet till nätspänningen (med

sladd) eller drivs av batteri (sladdlöst).

Säkerhet i arbetsområdet

•Arbetsområdet ska hållas välordnat och välbelyst.

I röriga eller mörka arbetsområden händer det lätt

olyckor.

•Använd inte elverktyg i explosiva miljöer, t.ex. i

närvaro av brandfarliga vätskor, gaser eller damm.

Gnistor från elverktyget kan antända damm eller

ångor.

•Håll barn och åskådare på avstånd när du använder

elverktyg. Om du blir distraherad kan du tappa

kontrollen.

Elsäkerhet

•Elverktygets stickkontakt måste passa i vägguttaget.

Förändra aldrig stickkontakten på något sätt.

Använd inte adapterkontakter tillsammans med

jordade elverktyg. Oförändrade stickkontakter och

motsvarande vägguttag minskar riskerna för

elektriska stötar.

•Undvik kroppskontakt med jordade ytor, t.ex.

rörledningar, värmeelement, spisar och kylskåp. Om

din kropp är jordad ökar risken för elektrisk stöt.

•Utsätt inte elverktyg för regn eller väta. Om vatten

tränger in i elverktyget ökar risken för elektrisk stöt.

•Använd inte sladden på fel sätt. Använd inte sladden

för att bära eller dra elverktyget, eller för att koppla

ur elverktyget från uttaget. Håll sladden borta från

värme, olja, vassa kanter och rörliga delar. Skadade

eller trassliga sladdar ökar risken för elektriska

stötar.

•När du använder ett elverktyg utomhus ska du även

använda en förlängningssladd för utomhusbruk. Om

du använder en sladd för utomhusbruk minskar

risken för elektriska stötar.

•Om det är oundvikligt att köra elverktyget i en

fuktig miljö ska du använda en jordfelsbrytare. Med

jordfelsbrytare minskar risken för elektriska stötar.

VARNING: Rengör inte maskinen med

högtryckstvätt, eftersom vatten kan tränga

in i elsystemet eller motorn och orsaka

maskinskador eller kortslutning.

Personligt skydd

•Var på din vakt, var uppmärksam på vad du gör och

använd sunt förnuft när du använder ett elverktyg.

Använd inte elverktyg om du är trött, har druckit

alkohol eller om du har tagit droger eller mediciner.

Ett ögonblick av ouppmärksamhet när du använder

ett elverktyg kan leda till allvarlig personskada.

•Använd personlig skyddsutrustning. Bär alltid

skyddsglasögon. Lämplig skyddsutrustning som

ansiktsmask, halkfria skyddsskor, hjälm eller

hörselskydd minskar risken för personskador.

•Förebygg att maskinen startar oavsiktligt. Se till

att strömbrytaren är frånslagen innan du ansluter

elverktyget till en strömkälla och/eller ett batteri samt

innan du tar upp eller bär verktyget. Risken för

olyckor är stor om du bär elverktyg med fingret

20 1710 - 006 - 11.11.2022

Leht laadib ...

Husqvarna 215iHD45 Kasutusjuhend

Husqvarna 215iHD45 Kasutusjuhend

teistes keeltes

Seotud paberid

Muud dokumendid