Dell Latitude XT2 Lühike juhend

Dell™ Latitude™ XT2 Media Base

Dell™ Latitude™ XT2 mediebase

Dell™ Latitude™ XT2 Media Base

Dell™ Latitude™ XT2 -liitäntäalusta

Station d'accueil de Dell™ Latitude™ XT2

Dell™ Latitude™ XT2 Media Base

Base per supporti multimediali Dell™ Latitude™ XT2

Dell™ Latitude™ XT2 Mediabase

Base de média Dell™ Latitude™ XT2

Dell™ Latitude™ XT2 Base para medios

Dell™ Latitude™ XT2 Media Base

book.book Page 1 Wednesday, December 3, 2008 2:23 PM

book.book Page 2 Wednesday, December 3, 2008 2:23 PM

Dell™ Latitude™ XT2 Media Base

Model PR12S

book.book Page 1 Wednesday, December 3, 2008 2:23 PM

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your

computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.; Microsoft and

Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

Model PR12S

November 2008 P/N G387N Rev. A00

book.book Page 2 Wednesday, December 3, 2008 2:23 PM

Media Base 3

Media Base

Back and Left View Features

1 Tablet-PC release lever 2 AC adapter connector

3 audio connector 4 IEEE 1394

5 VGA video connector 6 digital video interface (DVI) connector

7 serial connector 8 USB connector

9 powered USB connector 10 network connector

11 USB connector 12 optical drive in media bay

1

2

3

4

5

6

9

7

10

8

11

12

book.book Page 3 Wednesday, December 3, 2008 2:23 PM

4 Media Base

Top and Right View Features

Before Docking or Undocking Your Tablet-PC to

the Media Base

WARNING: If you are using a multiple-outlet power strip, use caution when you

plug the AC adapter power cable into the power strip. Some power strips may

allow you to insert the connector incorrectly. Incorrect insertion of the power

connector could result in permanent damage to your media base as well as

electric shock and/or fire. Ensure that you insert the ground prong of the power

plug into the mating ground contact of the power strip.

CAUTION: Always use the Dell AC adapter that came with the media base. If you

use any other commercially available AC adapter—or the AC adapter from earlier

models of Dell computers—you may damage the media base or the Tablet-PC.

1 docking connector 2 security cable slot

3 Tablet-PC release lever 4 USB connector

4

3

2

1

book.book Page 4 Wednesday, December 3, 2008 2:23 PM

Media Base 5

CAUTION: When you disconnect the Dell AC adapter cable from the Tablet-PC or

media base, hold the connector, not the cable itself, and pull firmly but gently to

avoid damaging the cable. When you wrap the AC adapter cable, ensure that you

follow the angle of the connector on the AC adapter to avoid damaging the cable.

CAUTION: Use the Latitude™ XT2 media base with your Latitude XT2 only. If you

use a media base from earlier models of Dell computers you may damage the

media base or the Tablet-PC.

Before Docking Your Tablet-PC

1

Save and close any open files, and exit any open programs.

2

Connect the AC adapter to the AC adapter connector on the media base

and to an electrical outlet.

3

Before you dock your Tablet-PC to the media base for the

first time

,

the Tablet-PC operating system must have completed its setup process:

a

Ensure that the Tablet-PC is

not

connected (docked) to the media

base or to the battery slice.

b

Turn on the Tablet-PC.

c

Verify that the Microsoft

®

Windows

®

desktop appears.

d

Shut down the Tablet-PC

.

book.book Page 5 Wednesday, December 3, 2008 2:23 PM

6 Media Base

Before Undocking Your Tablet-PC

1

Save and close any open files, and exit any open programs.

2

Set your Tablet-PC power management settings to ensure that the

Tablet-PC does not enter sleep, standby, or hibernate mode when you

close (lower) the display:

a

Click the Windows

Power

icon

in the Notification area to display

the

Power

icon pop-up window.

b

Click

More power options

.

c

Under the

When I close the lid

drop-down menu, select

Do nothing.

Securing the Media Base

NOTE: If the Tablet-PC is docked to the media base and the media base is secured,

you cannot undock the Tablet-PC without first removing the antitheft device.

Attach a commercially available antitheft device to the security cable slot on

the media base.

Antitheft devices usually include a segment of metal-stranded cable with an

attached locking device and associated key. For instructions on installing this

kind of antitheft device, see the documentation that accompanied the device.

Docking Your Tablet-PC to the Media Base

CAUTION: If you are docking your Tablet-PC for the first time, complete the steps

in "Before Docking or Undocking Your Tablet-PC to the Media Base" on page 4,

before your proceed.

NOTE: After docking the Tablet-PC for the first time, the Tablet-PC battery or the

Tablet-PC AC adapter connection can power the media base if the media base is

not connected to an AC adapter.

1

Follow the procedures in "Before Docking or Undocking Your Tablet-PC to

the Media Base" on page 4.

2

If this is the first time it is being docked to the media base, ensure that

your Tablet-PC is turned off .

3

Align the back of the Tablet-PC with the back of the media base, and lower

the Tablet-PC onto the media base.

book.book Page 6 Wednesday, December 3, 2008 2:23 PM

Media Base 7

4

Press the Tablet-PC onto the media base until it clicks and the Tablet-PC

is firmly seated.

5

Turn on the Tablet-PC.

The operating system recognizes the media base.

1 Tablet-PC 2 media base

1

2

book.book Page 7 Wednesday, December 3, 2008 2:23 PM

8 Media Base

Undocking Your Tablet-PC From the Media Base

CAUTION: Never undock the Tablet-PC without first preparing the Tablet-PC for

undocking. If you undock before preparing the Tablet-PC, you will lose data and

the Tablet-PC may not recover normal operation for several minutes, if at all.

CAUTION: If the Tablet-PC does not have a charged battery in the battery bay, you

must shut down the Tablet-PC through the Windows Start menu and then undock

the Tablet-PC. If you undock the Tablet-PC without a battery before shutting it

down, you will lose data and the Tablet-PC may not recover normal operation for

several minutes, if at all.

1

Follow the procedures in "Before Docking or Undocking Your Tablet-PC to

the Media Base" on page 4.

2

If your media base is secured using an anti-theft device, unlock it.

3

Disconnect the AC adapter connector from the media base.

4

Pull the Tablet-PC release lever forward to release the Tablet-PC from the

media base.

5

Lift the back of the Tablet-PC up and slide the Tablet-PC out towards the

back of the media base.

1 Tablet-PC 2

release lever

3 media base

1

2

3

book.book Page 8 Wednesday, December 3, 2008 2:23 PM

Media Base 9

Removing and Installing the Optical Drive From

the Media Base

1

Undock the media base (see "Undocking Your Tablet-PC From the Media

Base" on page 8).

2

Save and close any open files or programs, and turn off the Tablet-PC.

3

To remove the optical drive:

a

Remove the screw that secures the optical drive to the media base.

b

Use your screwdriver to slide the drive out of the media bay.

4

To install the optical drive:

a

Insert the optical drive into the media bay on the media base.

b

Insert the securing screw that holds the optical drive in place.

5

Turn on the Tablet-PC.

The operating system automatically recognizes the new drive.

1 screw 2 media base

3 optical drive 4 screw hole

2

3

1

4

book.book Page 9 Wednesday, December 3, 2008 2:23 PM

10 Media Base

Media Base Specifications

Physical

Height 12.8 mm (0.50 inches)

Width 295.31 mm (11.63 inches)

Depth 222.56 mm (8.76 inches)

Weight (without optical drive) 0.488 kg (1.076 lb)

Storage

Optical Drive (optional) DVD-ROM/DVD+RW

Ports and Connectors

Network RJ-45 port for 10/100/1000 Mbits/second

Ethernet

USB three 4-pin USB-2.0 compliant connectors

Powered USB one 9-pin USB-2.0 compliant connector

Video

VGA connector

15-pin VGA connector

DVI connector

24-hole connector

Serial 9-pin connector; 16550C-compatible UART

with 16-byte buffer

Audio headphone/speaker (line-out) mini connector

IEEE 1394a 4-pin serial connector

Docking 100-pin connector

book.book Page 10 Wednesday, December 3, 2008 2:23 PM

Dell™ Latitude™ XT2 mediebase

Model PR12S

book.book Page 11 Wednesday, December 3, 2008 1:57 PM

Bemærk, Forsigtig og Advarsel

BEMÆRK: BEMÆRK angiver vigtige oplysninger, som du kan bruge for at udnytte

computeren optimalt.

FORSIGTIG: FORSIGTIG angiver enten en mulig beskadigelse af hardware eller tab af

data og oplyser dig om, hvordan du kan undgå dette problem.

ADVARSEL: En ADVARSEL angiver risiko for tingskade, legemsbeskadigelse eller

død.

____________________

Oplysningerne i dette dokument kan ændres uden varsel.

Enhver form for gengivelse af disse materialer uden skriftlig tilladelse fra Dell Inc. er strengt forbudt.

Varemærker i denne tekst: Dell, DELL-logoet og Latitude er varemærker tilhørende Dell Inc.; Microsoft

og Windows er registrerede varemærker tilhørende Microsoft Corporation i USA og/eller andre lande.

Andre varemærker og firmanavne kan være brugt i dette dokument til at henvise til enten de fysiske eller

juridiske personer, som gør krav på mærkerne og navnene, eller til deres produkter. Dell Inc. fraskriver sig

enhver tingslig rettighed, for så vidt angår varemærker og firmanavne, som ikke er deres egne.

Model PR12S

November 2008 P/N G387N Rev. A00

book.book Page 12 Wednesday, December 3, 2008 1:57 PM

Mediebase 13

Mediebase

Set bagfra og fra venstre

1 Frigørelsesgreb til Tablet-PC 2 AC-adapterstik

3 lydstik 4 IEEE 1394

5 VGA-skærmstik 6 stik til digital-videogrænseflade (DVI)

7 seriel port 8 USB-stik

9 strømdrevet USB-stik 10 netværksstik

11 USB-stik 12 optisk enhed i mediebås

1

2

3

4

5

6

9

7

10

8

11

12

book.book Page 13 Wednesday, December 3, 2008 1:57 PM

14 Mediebase

Funktioner, der findes øverst og til højre

Inden docking eller undocking af Tablet-PC til

mediebasen

ADVARSEL: Hvis du bruger en stikdåse med jordben, skal du udvise forsigtighed,

når du sætter AC-adapterens netledning i stikdåsen. I forbindelse med visse

stikdåser er det muligt at komme til at sætte stikket forkert i. Forkert placering af

strømstikket kan medføre permanent skade på enheden, ligesom der kan opstå

risiko for elektrisk stød og/eller brand. Du skal sikre dig, at det jordforbindende

ben på ledningsstikket er sat i det tilsvarende hul i stikdåsen.

FORSIGTIG: Brug altid den Dell AC-adapter, som fulgte med mediebasen. Hvis du

bruger nogen anden almindelig tilgængelig AC-adapter - eller AC-adapteren fra

tidligere modeller af Dell-computere - kan du beskadige mediebasen eller Tablet-

PC.

1 dockingforbindelsesstik 2 stik til sikkerhedskabel

3 Frigørelsesgreb til Tablet-PC 4 USB-stik

4

3

2

1

book.book Page 14 Wednesday, December 3, 2008 1:57 PM

Mediebase 15

FORSIGTIG: Når du kobler Dell AC-adapterkablet fra Tablet-PC eller mediebasen,

skal du tage fat i stikket, ikke i selve kablet, og trække godt i det, men forsigtigt for

at undgå at beskadige kablet. Når du pakker AC-adapterkablet sammen, skal du

sørge for at følge vinklen på AC-adapterens stik for at forhindre beskadigelse af

kablet.

FORSIGTIG: Brug kun Latitude™ XT2-mediebasen med Latitude XT2. Hvis du

bruger en mediebase fra tidligere modeller med Dell-computere, kan du muligvis

ødelægge mediebase eller Tablet-PC.

Inden du docker din Tablet-PC

1

Gem og luk alle åbne filer, og luk alle åbne programmer.

2

Slut AC-adapteren til AC-adapterstikket på mediebasen og til

stikkontakten.

3

Inden du docker din Tablet-PC til mediebasen for

første gang

, skal

operativsystemet i Tablet-PC først have afsluttet sin konfiguration:

a

Kontroller, at Tablet-PC

ikke

er tilsluttet (docket) til mediebasen eller

batterirummet.

b

Tænd for Tablet-PC.

c

Kontroller, at Microsoft

®

Windows

®

-skrivebordet vises.

d

Sluk for Tablet-PC

.

book.book Page 15 Wednesday, December 3, 2008 1:57 PM

16 Mediebase

Inden du undocker din Tablet-PC

1

Gem og luk alle åbne filer, og luk alle åbne programmer.

2

Angiv indstillingerne til strømstyring på Tablet-PC til at kontrollere, at

Tablet-PC ikke aktiverer standby eller dvale, når du lukker (sænker)

skærmen:

a

Klik på Windows'

-strømikon

i meddelelsesområdet for at få vist

strømikonet

i pop-op-vinduet.

b

Klik på

More power options

.

c

På rullemenuen

Når jeg lukker låget

skal du vælge

Foretag dig intet.

Fastgøring af mediebasen

BEMÆRK: Hvis Tablet-PC er docket til mediebasen, og mediebasen er fastgjort,

kan du ikke docke Tablet-PC uden først at fjerne tyverisikringsenheden.

Monter en kommercielt tilgængelig tyverisikringsenhed i

sikkerhedskabelåbningen på mediebasen.

Tyverisikringsenhed inkluderer som regel et stykke metalsnoet kabel med en

fastgjort lås og tilhørende nøgle. Få oplysninger om installation af denne slags

tyverisikringsenhed i den dokumentation, som fulgte med enheden.

Docking af Tablet-PC til mediebasen

FORSIGTIG: Hvis du docker din Tablet-PC for første gang, skal du udføre trinene i

"Inden docking eller undocking af Tablet-PC til mediebasen" på side 14, inden du

fortsætter.

BEMÆRK: Efter at have docket Tablet-PC for første gang kan Tablet-PC-batteriet

eller Tablet-PC'ens AC-adapterforbindelse levere strøm til mediebasen, hvis

mediebasen ikke er sluttet til en AC-adapter.

1

Følg procedurerne i "Inden docking eller undocking af Tablet-PC til

mediebasen" på side 14.

2

Hvis det er første gang, at den dockes til mediebasen, skal du kontrollere,

at din Tablet-PC er slukket.

3

Juster det bagerste af Tablet-PC'en med bagsiden på mediebasen, og sænk

Tablet-PC'en ned i mediebasen.

book.book Page 16 Wednesday, December 3, 2008 1:57 PM

Mediebase 17

4

Tryk Tablet-PC'en ned i mediebasen, indtil den klikker på plads, og Tablet-

PC'en sidder godt fast.

5

Tænd for Tablet-PC.

Operativsystemet genkender mediebasen.

1 Tablet-PC 2 mediebase

1

2

book.book Page 17 Wednesday, December 3, 2008 1:57 PM

18 Mediebase

Undocking af din Tablet-PC fra mediebasen

FORSIGTIG: Undock aldrig Tablet-PC'en uden først at forberede Tablet-PC'en til

undocking. Hvis du undocker, inden du har forberedt Tablet-PC'en, mister du data,

og Tablet-PC'en gendannes muligvis ikke til normal drift i flere minutter, hvis den

overhovedet gør det.

FORSIGTIG: Hvis Tablet-PC'en ikke har et opladet batteri i batterirummet, skal du

lukke ned for Tablet-PC'en via Windows' Start-menu og derefter undocke Tablet-

PC'en. Hvis du undocker Tablet-PC'en uden et batteri, inden du lukker ned, kan du

miste data, og Tablet-PC'en gendannes muligvis ikke til normal drift i flere

minutter, hvis den overhovedet gør det.

1

Følg procedurerne i "Inden docking eller undocking af Tablet-PC til

mediebasen" på side 14.

2

Hvis mediebasen er fastgjort med en tyverisikringsenhed, skal du låse den

op.

3

Frakobl AC-adapteren fra mediebasen.

4

Træk frigørelsesgrebet til Tablet-PC'en fremad for at frigøre Tablet-PC'en

fra mediebasen.

1 Tablet-PC 2

frigørelsesgreb

3 mediebase

1

2

3

book.book Page 18 Wednesday, December 3, 2008 1:57 PM

Leht laadib ...

Dell Latitude XT2 Lühike juhend

Dell Latitude XT2 Lühike juhend

teistes keeltes

Seotud paberid

Muud dokumendid