INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTION
Part Number 30480 Gas filler Neck Part Number 30480 Gas Filler Neck
Remove the gas cap and the plastic holding strap.
Remove the gas cap and the plastic holding strap.
Remove the eight screws holding the existing filler neck.
Install the new Stainless Steel gas filler neck using the
stainless screws provided. The four 3/4” Lg. Screws go
on the outside and the long screws go on the inside.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
Remove the eight screws holding the existing filler neck.
Install the new Stainless Steel gas filler neck using the
stainless screws provided. The four 3/4” Lg. Screws go
on the outside and the long screws go on the inside.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
-
1
teistes keeltes
- English: Kentrol 30480 Installation guide
Muud dokumendid
-
Ransomes 88010G01 88043G01 Omaniku manuaal
-
-
ESAB RT Robo Welding Torch System Kasutusjuhend
-
-
Jacobsen 68131G01 Omaniku manuaal
-
GE PGP990DEN1WW Omaniku manuaal
-
Jacobsen Super LF 1880 68007 Omaniku manuaal
-
Rosemount OCX 8800 O2 / Combustibles Transmitter General Purpose Omaniku manuaal
-
-
Oracle Fabric Interconnect F2-12 paigaldusjuhend
